Skip to content

Latest commit

 

History

History

snmp_legacy

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
README.md
README.md
 
 
snmp_legacy.go
snmp_legacy.go
 
 

README.md

SNMP Input Plugin

The SNMP input plugin gathers metrics from SNMP agents

Configuration:

Very simple example

In this example, the plugin will gather value of OIDS:

  • .1.3.6.1.2.1.2.2.1.4.1
# Very Simple Example
[[inputs.snmp]]

  [[inputs.snmp.host]]
    address = "127.0.0.1:161"
    # SNMP community
    community = "public" # default public
    # SNMP version (1, 2 or 3)
    # Version 3 not supported yet
    version = 2 # default 2
    # Simple list of OIDs to get, in addition to "collect"
    get_oids = [".1.3.6.1.2.1.2.2.1.4.1"]

Simple example

In this example, Telegraf gathers value of OIDS:

  • named ifnumber
  • named interface_speed

With inputs.snmp.get section the plugin gets the oid number:

  • ifnumber => .1.3.6.1.2.1.2.1.0
  • interface_speed => ifSpeed

As you can see ifSpeed is not a valid OID. In order to get the valid OID, the plugin uses snmptranslate_file to match the OID:

  • ifnumber => .1.3.6.1.2.1.2.1.0
  • interface_speed => ifSpeed => .1.3.6.1.2.1.2.2.1.5

Also as the plugin will append instance to the corresponding OID:

  • ifnumber => .1.3.6.1.2.1.2.1.0
  • interface_speed => ifSpeed => .1.3.6.1.2.1.2.2.1.5.1

In this example, the plugin will gather value of OIDS:

  • .1.3.6.1.2.1.2.1.0
  • .1.3.6.1.2.1.2.2.1.5.1
# Simple example
[[inputs.snmp]]
  ## Use 'oids.txt' file to translate oids to names
  ## To generate 'oids.txt' you need to run:
  ##   snmptranslate -m all -Tz -On | sed -e 's/"//g' > /tmp/oids.txt
  ## Or if you have an other MIB folder with custom MIBs
  ##   snmptranslate -M /mycustommibfolder -Tz -On -m all | sed -e 's/"//g' > oids.txt
  snmptranslate_file = "/tmp/oids.txt"
  [[inputs.snmp.host]]
    address = "127.0.0.1:161"
    # SNMP community
    community = "public" # default public
    # SNMP version (1, 2 or 3)
    # Version 3 not supported yet
    version = 2 # default 2
    # Which get/bulk do you want to collect for this host
    collect = ["ifnumber", "interface_speed"]

  [[inputs.snmp.get]]
    name = "ifnumber"
    oid = ".1.3.6.1.2.1.2.1.0"

  [[inputs.snmp.get]]
    name = "interface_speed"
    oid = "ifSpeed"
    instance = "1"

Simple bulk example

In this example, Telegraf gathers value of OIDS:

  • named ifnumber
  • named interface_speed
  • named if_out_octets

With inputs.snmp.get section the plugin gets oid number:

  • ifnumber => .1.3.6.1.2.1.2.1.0
  • interface_speed => ifSpeed

With inputs.snmp.bulk section the plugin gets the oid number:

  • if_out_octets => ifOutOctets

As you can see ifSpeed and ifOutOctets are not a valid OID. In order to get the valid OID, the plugin uses snmptranslate_file to match the OID:

  • ifnumber => .1.3.6.1.2.1.2.1.0
  • interface_speed => ifSpeed => .1.3.6.1.2.1.2.2.1.5
  • if_out_octets => ifOutOctets => .1.3.6.1.2.1.2.2.1.16

Also, the plugin will append instance to the corresponding OID:

  • ifnumber => .1.3.6.1.2.1.2.1.0
  • interface_speed => ifSpeed => .1.3.6.1.2.1.2.2.1.5.1

And if_out_octets is a bulk request, the plugin will gathers all OIDS in the table.

  • .1.3.6.1.2.1.2.2.1.16.1
  • .1.3.6.1.2.1.2.2.1.16.2
  • .1.3.6.1.2.1.2.2.1.16.3
  • .1.3.6.1.2.1.2.2.1.16.4
  • .1.3.6.1.2.1.2.2.1.16.5
  • ...

In this example, the plugin will gather value of OIDS:

  • .1.3.6.1.2.1.2.1.0
  • .1.3.6.1.2.1.2.2.1.5.1
  • .1.3.6.1.2.1.2.2.1.16.1
  • .1.3.6.1.2.1.2.2.1.16.2
  • .1.3.6.1.2.1.2.2.1.16.3
  • .1.3.6.1.2.1.2.2.1.16.4
  • .1.3.6.1.2.1.2.2.1.16.5
  • ...
# Simple bulk example
[[inputs.snmp]]
  ## Use 'oids.txt' file to translate oids to names
  ## To generate 'oids.txt' you need to run:
  ##   snmptranslate -m all -Tz -On | sed -e 's/"//g' > /tmp/oids.txt
  ## Or if you have an other MIB folder with custom MIBs
  ##   snmptranslate -M /mycustommibfolder -Tz -On -m all | sed -e 's/"//g' > oids.txt
  snmptranslate_file = "/tmp/oids.txt"
  [[inputs.snmp.host]]
    address = "127.0.0.1:161"
    # SNMP community
    community = "public" # default public
    # SNMP version (1, 2 or 3)
    # Version 3 not supported yet
    version = 2 # default 2
    # Which get/bulk do you want to collect for this host
    collect = ["interface_speed", "if_number", "if_out_octets"]

  [[inputs.snmp.get]]
    name = "interface_speed"
    oid = "ifSpeed"
    instance = "1"

  [[inputs.snmp.get]]
    name = "if_number"
    oid = "ifNumber"

  [[inputs.snmp.bulk]]
    name = "if_out_octets"
    oid = "ifOutOctets"

Table example

In this example, we remove collect attribute to the host section, but you can still use it in combination of the following part.

Note: This example is like a bulk request a but using an other configuration

Telegraf gathers value of OIDS of the table:

  • named iftable1

With inputs.snmp.table section the plugin gets oid number:

  • iftable1 => .1.3.6.1.2.1.31.1.1.1

Also iftable1 is a table, the plugin will gathers all OIDS in the table and in the subtables

  • .1.3.6.1.2.1.31.1.1.1.1
  • .1.3.6.1.2.1.31.1.1.1.1.1
  • .1.3.6.1.2.1.31.1.1.1.1.2
  • .1.3.6.1.2.1.31.1.1.1.1.3
  • .1.3.6.1.2.1.31.1.1.1.1.4
  • .1.3.6.1.2.1.31.1.1.1.1....
  • .1.3.6.1.2.1.31.1.1.1.2
  • .1.3.6.1.2.1.31.1.1.1.2....
  • .1.3.6.1.2.1.31.1.1.1.3
  • .1.3.6.1.2.1.31.1.1.1.3....
  • .1.3.6.1.2.1.31.1.1.1.4
  • .1.3.6.1.2.1.31.1.1.1.4....
  • .1.3.6.1.2.1.31.1.1.1.5
  • .1.3.6.1.2.1.31.1.1.1.5....
  • .1.3.6.1.2.1.31.1.1.1.6....
  • ...
# Table example
[[inputs.snmp]]
  ## Use 'oids.txt' file to translate oids to names
  ## To generate 'oids.txt' you need to run:
  ##   snmptranslate -m all -Tz -On | sed -e 's/"//g' > /tmp/oids.txt
  ## Or if you have an other MIB folder with custom MIBs
  ##   snmptranslate -M /mycustommibfolder -Tz -On -m all | sed -e 's/"//g' > oids.txt
  snmptranslate_file = "/tmp/oids.txt"
  [[inputs.snmp.host]]
    address = "127.0.0.1:161"
    # SNMP community
    community = "public" # default public
    # SNMP version (1, 2 or 3)
    # Version 3 not supported yet
    version = 2 # default 2
    # Which get/bulk do you want to collect for this host
    # Which table do you want to collect
    [[inputs.snmp.host.table]]
      name = "iftable1"

  # table without mapping neither subtables
  # This is like bulk request
  [[inputs.snmp.table]]
    name = "iftable1"
    oid = ".1.3.6.1.2.1.31.1.1.1"

Table with subtable example

In this example, we remove collect attribute to the host section, but you can still use it in combination of the following part.

Note: This example is like a bulk request a but using an other configuration

Telegraf gathers value of OIDS of the table:

  • named iftable2

With inputs.snmp.table section AND sub_tables attribute, the plugin will get OIDS from subtables:

  • iftable2 => .1.3.6.1.2.1.2.2.1.13

Also iftable2 is a table, the plugin will gathers all OIDS in subtables:

  • .1.3.6.1.2.1.2.2.1.13.1
  • .1.3.6.1.2.1.2.2.1.13.2
  • .1.3.6.1.2.1.2.2.1.13.3
  • .1.3.6.1.2.1.2.2.1.13.4
  • .1.3.6.1.2.1.2.2.1.13....
# Table with subtable example
[[inputs.snmp]]
  ## Use 'oids.txt' file to translate oids to names
  ## To generate 'oids.txt' you need to run:
  ##   snmptranslate -m all -Tz -On | sed -e 's/"//g' > /tmp/oids.txt
  ## Or if you have an other MIB folder with custom MIBs
  ##   snmptranslate -M /mycustommibfolder -Tz -On -m all | sed -e 's/"//g' > oids.txt
  snmptranslate_file = "/tmp/oids.txt"
  [[inputs.snmp.host]]
    address = "127.0.0.1:161"
    # SNMP community
    community = "public" # default public
    # SNMP version (1, 2 or 3)
    # Version 3 not supported yet
    version = 2 # default 2
    # Which table do you want to collect
    [[inputs.snmp.host.table]]
      name = "iftable2"

  # table without mapping but with subtables
  [[inputs.snmp.table]]
    name = "iftable2"
    sub_tables = [".1.3.6.1.2.1.2.2.1.13"]
    # note
    # oid attribute is useless

Table with mapping example

In this example, we remove collect attribute to the host section, but you can still use it in combination of the following part.

Telegraf gathers value of OIDS of the table:

  • named iftable3

With inputs.snmp.table section the plugin gets oid number:

  • iftable3 => .1.3.6.1.2.1.31.1.1.1

Also iftable2 is a table, the plugin will gathers all OIDS in the table and in the subtables

  • .1.3.6.1.2.1.31.1.1.1.1
  • .1.3.6.1.2.1.31.1.1.1.1.1
  • .1.3.6.1.2.1.31.1.1.1.1.2
  • .1.3.6.1.2.1.31.1.1.1.1.3
  • .1.3.6.1.2.1.31.1.1.1.1.4
  • .1.3.6.1.2.1.31.1.1.1.1....
  • .1.3.6.1.2.1.31.1.1.1.2
  • .1.3.6.1.2.1.31.1.1.1.2....
  • .1.3.6.1.2.1.31.1.1.1.3
  • .1.3.6.1.2.1.31.1.1.1.3....
  • .1.3.6.1.2.1.31.1.1.1.4
  • .1.3.6.1.2.1.31.1.1.1.4....
  • .1.3.6.1.2.1.31.1.1.1.5
  • .1.3.6.1.2.1.31.1.1.1.5....
  • .1.3.6.1.2.1.31.1.1.1.6....
  • ...

But the include_instances attribute will filter which OIDS will be gathered; As you see, there is an other attribute, mapping_table. include_instances and mapping_table permit to build a hash table to filter only OIDS you want. Let's say, we have the following data on SNMP server:

  • OID: .1.3.6.1.2.1.31.1.1.1.1.1 has as value: enp5s0
  • OID: .1.3.6.1.2.1.31.1.1.1.1.2 has as value: enp5s1
  • OID: .1.3.6.1.2.1.31.1.1.1.1.3 has as value: enp5s2
  • OID: .1.3.6.1.2.1.31.1.1.1.1.4 has as value: eth0
  • OID: .1.3.6.1.2.1.31.1.1.1.1.5 has as value: eth1

The plugin will build the following hash table:

instance name instance id
enp5s0 1
enp5s1 2
enp5s2 3
eth0 4
eth1 5

With the include_instances attribute, the plugin will gather the following OIDS:

  • .1.3.6.1.2.1.31.1.1.1.1.1
  • .1.3.6.1.2.1.31.1.1.1.1.5
  • .1.3.6.1.2.1.31.1.1.1.2.1
  • .1.3.6.1.2.1.31.1.1.1.2.5
  • .1.3.6.1.2.1.31.1.1.1.3.1
  • .1.3.6.1.2.1.31.1.1.1.3.5
  • .1.3.6.1.2.1.31.1.1.1.4.1
  • .1.3.6.1.2.1.31.1.1.1.4.5
  • .1.3.6.1.2.1.31.1.1.1.5.1
  • .1.3.6.1.2.1.31.1.1.1.5.5
  • .1.3.6.1.2.1.31.1.1.1.6.1
  • .1.3.6.1.2.1.31.1.1.1.6.5
  • ...

Note: the plugin will add instance name as tag instance

# Simple table with mapping example
[[inputs.snmp]]
  ## Use 'oids.txt' file to translate oids to names
  ## To generate 'oids.txt' you need to run:
  ##   snmptranslate -m all -Tz -On | sed -e 's/"//g' > /tmp/oids.txt
  ## Or if you have an other MIB folder with custom MIBs
  ##   snmptranslate -M /mycustommibfolder -Tz -On -m all | sed -e 's/"//g' > oids.txt
  snmptranslate_file = "/tmp/oids.txt"
  [[inputs.snmp.host]]
    address = "127.0.0.1:161"
    # SNMP community
    community = "public" # default public
    # SNMP version (1, 2 or 3)
    # Version 3 not supported yet
    version = 2 # default 2
    # Which table do you want to collect
    [[inputs.snmp.host.table]]
      name = "iftable3"
      include_instances = ["enp5s0", "eth1"]

  # table with mapping but without subtables
  [[inputs.snmp.table]]
    name = "iftable3"
    oid = ".1.3.6.1.2.1.31.1.1.1"
    # if empty. get all instances
    mapping_table = ".1.3.6.1.2.1.31.1.1.1.1"
    # if empty, get all subtables

Table with both mapping and subtable example

In this example, we remove collect attribute to the host section, but you can still use it in combination of the following part.

Telegraf gathers value of OIDS of the table:

  • named iftable4

With inputs.snmp.table section AND sub_tables attribute, the plugin will get OIDS from subtables:

  • iftable4 => .1.3.6.1.2.1.31.1.1.1

Also iftable2 is a table, the plugin will gathers all OIDS in the table and in the subtables

  • `.1.3.6.1.2.1.31.1.1.1.6.1
  • .1.3.6.1.2.1.31.1.1.1.6.2
  • .1.3.6.1.2.1.31.1.1.1.6.3
  • .1.3.6.1.2.1.31.1.1.1.6.4
  • .1.3.6.1.2.1.31.1.1.1.6....
  • .1.3.6.1.2.1.31.1.1.1.10.1
  • .1.3.6.1.2.1.31.1.1.1.10.2
  • .1.3.6.1.2.1.31.1.1.1.10.3
  • .1.3.6.1.2.1.31.1.1.1.10.4
  • .1.3.6.1.2.1.31.1.1.1.10....

But the include_instances attribute will filter which OIDS will be gathered; As you see, there is an other attribute, mapping_table. include_instances and mapping_table permit to build a hash table to filter only OIDS you want. Let's say, we have the following data on SNMP server:

  • OID: .1.3.6.1.2.1.31.1.1.1.1.1 has as value: enp5s0
  • OID: .1.3.6.1.2.1.31.1.1.1.1.2 has as value: enp5s1
  • OID: .1.3.6.1.2.1.31.1.1.1.1.3 has as value: enp5s2
  • OID: .1.3.6.1.2.1.31.1.1.1.1.4 has as value: eth0
  • OID: .1.3.6.1.2.1.31.1.1.1.1.5 has as value: eth1

The plugin will build the following hash table:

instance name instance id
enp5s0 1
enp5s1 2
enp5s2 3
eth0 4
eth1 5

With the include_instances attribute, the plugin will gather the following OIDS:

  • .1.3.6.1.2.1.31.1.1.1.6.1
  • .1.3.6.1.2.1.31.1.1.1.6.5
  • .1.3.6.1.2.1.31.1.1.1.10.1
  • .1.3.6.1.2.1.31.1.1.1.10.5

Note: the plugin will add instance name as tag instance

# Table with both mapping and subtable example
[[inputs.snmp]]
  ## Use 'oids.txt' file to translate oids to names
  ## To generate 'oids.txt' you need to run:
  ##   snmptranslate -m all -Tz -On | sed -e 's/"//g' > /tmp/oids.txt
  ## Or if you have an other MIB folder with custom MIBs
  ##   snmptranslate -M /mycustommibfolder -Tz -On -m all | sed -e 's/"//g' > oids.txt
  snmptranslate_file = "/tmp/oids.txt"
  [[inputs.snmp.host]]
    address = "127.0.0.1:161"
    # SNMP community
    community = "public" # default public
    # SNMP version (1, 2 or 3)
    # Version 3 not supported yet
    version = 2 # default 2
    # Which table do you want to collect
    [[inputs.snmp.host.table]]
      name = "iftable4"
      include_instances = ["enp5s0", "eth1"]

  # table with both mapping and subtables
  [[inputs.snmp.table]]
    name = "iftable4"
    # if empty get all instances
    mapping_table = ".1.3.6.1.2.1.31.1.1.1.1"
    # if empty get all subtables
    # sub_tables could be not "real subtables"  
    sub_tables=[".1.3.6.1.2.1.2.2.1.13", "bytes_recv", "bytes_send"]
    # note
    # oid attribute is useless

  # SNMP SUBTABLES
  [[inputs.snmp.subtable]]
    name = "bytes_recv"
    oid = ".1.3.6.1.2.1.31.1.1.1.6"
    unit = "octets"

  [[inputs.snmp.subtable]]
    name = "bytes_send"
    oid = ".1.3.6.1.2.1.31.1.1.1.10"
    unit = "octets"

Configuration notes

  • In inputs.snmp.table section, the oid attribute is useless if the sub_tables attributes is defined

  • In inputs.snmp.subtable section, you can put a name from snmptranslate_file as oid attribute instead of a valid OID

Measurements & Fields:

With the last example (Table with both mapping and subtable example):

  • ifHCOutOctets
    • ifHCOutOctets
  • ifInDiscards
    • ifInDiscards
  • ifHCInOctets
    • ifHCInOctets

Tags:

With the last example (Table with both mapping and subtable example):

  • ifHCOutOctets
    • host
    • instance
    • unit
  • ifInDiscards
    • host
    • instance
  • ifHCInOctets
    • host
    • instance
    • unit

Example Output:

With the last example (Table with both mapping and subtable example):

ifHCOutOctets,host=127.0.0.1,instance=enp5s0,unit=octets ifHCOutOctets=10565628i 1456878706044462901
ifInDiscards,host=127.0.0.1,instance=enp5s0 ifInDiscards=0i 1456878706044510264
ifHCInOctets,host=127.0.0.1,instance=enp5s0,unit=octets ifHCInOctets=76351777i 1456878706044531312