init.qcom.rc

# Copyright (c) 2009-2012, Code Aurora Forum. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of Code Aurora nor
#       the names of its contributors may be used to endorse or promote
#       products derived from this software without specific prior written
#       permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#

import init.qcom.usb.rc

on init
    # Set permissions for persist partition
    mkdir /persist 0771 system system

    #External storage directories
    mkdir /mnt/media_rw/sdcard0 0700 media_rw media_rw
    mkdir /mnt/media_rw/sdcard1 0700 media_rw media_rw
    mkdir /mnt/media_rw/usbdisk 0700 media_rw media_rw

    mkdir /storage/sdcard0 0700 root root
    mkdir /storage/sdcard1 0700 root root
    mkdir /storage/usbdisk 0700 root root

    export EXTERNAL_STORAGE /storage/sdcard0
    export SECONDARY_STORAGE /storage/sdcard1

    # for backwards compatibility
    symlink /storage/sdcard0 /sdcard
    symlink /storage/sdcard0 /mnt/sdcard
    symlink /storage/sdcard1 /external_sd
    symlink /storage/sdcard1 /mnt/external_sd
    symlink /storage/usbdisk /usbdisk
    symlink /storage/usbdisk /mnt/usbdisk

on early-boot
    # set RLIMIT_MEMLOCK to 64MB
    setrlimit 8 67108864 67108864
    exec /system/bin/sh /init.qcom.early_boot.sh ${ro.board.platform}
    exec /system/bin/sh /init.qcom.syspart_fixup.sh ${ro.board.platform} ${ro.serialno}

on boot
    mount debugfs /sys/kernel/debug /sys/kernel/debug
    mkdir /data/misc/bluetooth 0770 bluetooth bluetooth
    chown bluetooth bluetooth /sys/module/bluetooth_power/parameters/power
    chown bluetooth bluetooth /sys/class/rfkill/rfkill0/type
    chown bluetooth bluetooth /sys/class/rfkill/rfkill0/state
    chown bluetooth bluetooth /proc/bluetooth/sleep/proto
    chown system system /sys/module/sco/parameters/disable_esco
#    chown bluetooth bluetooth /sys/module/hci_smd/parameters/hcismd_set
    chmod 0660 /sys/module/bluetooth_power/parameters/power
#    chmod 0660 /sys/module/hci_smd/parameters/hcismd_set
    chmod 0660 /sys/class/rfkill/rfkill0/state
    chmod 0660 /proc/bluetooth/sleep/proto
    chown bluetooth bluetooth /dev/ttyHS0
    chmod 0660 /dev/ttyHS0
    chown bluetooth bluetooth /sys/devices/platform/msm_serial_hs.0/clock
    chmod 0660 /sys/devices/platform/msm_serial_hs.0/clock
    # bluetooth MAC address programming
    setprop ro.bt.bdaddr_path "/efs/bluetooth/bt_addr"
    chown bluetooth bluetooth ro.bt.bdaddr_path

    # bluetooth LPM
    chmod 0220 /proc/bluetooth/sleep/lpm
    chmod 0220 /proc/bluetooth/sleep/btwrite
    chown bluetooth net_bt_stack /proc/bluetooth/sleep/lpm
    chown bluetooth net_bt_stack /proc/bluetooth/sleep/btwrite

    mkdir /dev/socket/qmux_radio 0770 radio radio
    chmod 2770 /dev/socket/qmux_radio
    mkdir /dev/socket/qmux_audio 0770 media audio
    chmod 2770 /dev/socket/qmux_audio
    mkdir /dev/socket/qmux_bluetooth 0770 bluetooth bluetooth
    chmod 2770 /dev/socket/qmux_bluetooth
    mkdir /dev/socket/qmux_gps 0770 gps gps
    chmod 2770 /dev/socket/qmux_gps

    # TelephonyManager.java requires this
    chmod 0644 /proc/cmdline

    # Enable Bluetooth 802.11 PAL when Bluetooth is turned on
    setprop ro.config.bt.amp no

    # permissions for NFC
    chmod 0600 /dev/pn544
    chown nfc nfc /dev/pn544
    
    #Set SUID bit for usbhub
    chmod 4755 /system/bin/usbhub
    chmod 755 /system/bin/usbhub_init

    #Remove SUID bit for iproute2 ip tool
    chmod 0755 /system/bin/ip

    # Dummy command to open() /dev/smd0 and not attempt to read any bytes from it
    #
    # This causes smd_tty_open() in arch/arm/mach-msm/smd_tty.c to load
    # the modem firmware early. This is necessary to avoid a race condition
    # where in-call audio dies if a phone call is made before initialization
    # has finished.
    exec /system/xbin/busybox dd if=/dev/smd0 of=/dev/null bs=1 count=1 skip=1

    chmod 0444 /sys/devices/platform/msm_hsusb/gadget/usb_state

    # create symlink for fb1 as HDMI
    symlink /dev/graphics/fb1 /dev/graphics/hdmi

    # Remove write permissions to video related nodes
    chmod 0664 /sys/devices/virtual/graphics/fb1/hpd
    chmod 0664 /sys/devices/virtual/graphics/fb1/video_mode
    chmod 0664 /sys/devices/virtual/graphics/fb1/format_3d

    #HDMID Permission for sys nodes
    chown system graphics /sys/class/graphics/fb1/connected
    chown system graphics /sys/class/graphics/fb1/edid_modes
    chown system graphics /sys/class/graphics/fb1/power_state
    chown system graphics /sys/class/graphics/fb1/hpd
    chown system graphics /sys/class/graphics/fb1/hdcp_present
    chown system graphics /sys/class/graphics/fb1/hdmi_mode
    chmod 0660 /sys/class/graphics/fb1/power_state
	
	#increase dirty_writeback_interval
    write /proc/sys/vm/dirty_writeback_centisecs 60000
    write /proc/sys/vm/dirty_expire_centisecs 60000

    #For bridgemgr daemon to inform the USB driver of the correct transport
    chown radio radio /sys/class/android_usb/f_rmnet_smd_sdio/transport

    #To allow interfaces to get v6 address when tethering is enabled
    write /proc/sys/net/ipv6/conf/rmnet0/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet1/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet2/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet3/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet4/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet5/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet6/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet7/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra 2
    write /proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra 2

# msm specific files that need to be created on /data
on post-fs-data

#    mkdir /data/misc/bluetooth 0770 bluetooth bluetooth

    # Create the directories used by the Wireless subsystem
    mkdir /data/misc/wifi 0770 wifi wifi
    mkdir /data/misc/wifi/sockets 0770 wifi wifi
    mkdir /data/misc/wifi/wpa_supplicant 0770 wifi wifi
    mkdir /data/misc/dhcp 0770 dhcp dhcp

    # for skt iwlan
    mkdir /data/iwland 0775 root wifi
    chown root wifi /data/iwland
    chmod 0775 /data/iwland

    # Create directory used by audio subsystem
    mkdir /data/misc/audio 0770 audio audio

    # Mounting of persist is moved to 'on emmc-fs' and 'on fs' sections
    # We chown/chmod /persist again so because mount is run as root + defaults
    chown system system /persist
    chmod 0771 /persist
    chmod 0664 /sys/devices/platform/msm_sdcc.1/polling
    chmod 0664 /sys/devices/platform/msm_sdcc.2/polling
    chmod 0664 /sys/devices/platform/msm_sdcc.3/polling
    chmod 0664 /sys/devices/platform/msm_sdcc.4/polling

    # Chown polling nodes as needed from UI running on system server
    chown system system /sys/devices/platform/msm_sdcc.1/polling
    chown system system /sys/devices/platform/msm_sdcc.2/polling
    chown system system /sys/devices/platform/msm_sdcc.3/polling
    chown system system /sys/devices/platform/msm_sdcc.4/polling

    #Create the symlink to qcn wpa_supplicant folder for ar6000 wpa_supplicant
    mkdir /data/system 0775 system system
    #symlink /data/misc/wifi/wpa_supplicant /data/system/wpa_supplicant

    #Create directories for wiper services
    mkdir /data/wpstiles/ 0755 shell
    mkdir /data/wiper 0755 location qcom_oncrpc

    #Create directories for QuIPS
    mkdir /data/misc/quipc 0770 gps system

    #Create directory from IMS services
    mkdir /data/shared 0755
    chown system system /data/shared

    #Create directory for FOTA
    mkdir /data/fota 0771
    chown system system /data/fota

    # Create /data/time folder for time-services
    mkdir /data/time/ 0700 system system

    setprop vold.post_fs_data_done 1

# Export GPIO56 for fusion targets to enable/disable hub
service usbhub_init /system/bin/usbhub_init
   class late_start
   user root
   disabled
   oneshot

on property:ro.board.platform=msm7630_fusion
    start usbhub_init

on property:init.svc.wpa_supplicant=stopped
    stop dhcpcd

on property:init.svc.p2p_supplicant=stopped
    stop dhcpcd

service qcom-c_core-sh /system/bin/sh /init.qcom.class_core.sh
    class core
    user root
    oneshot

service qcom-c_main-sh /system/bin/sh /init.qcom.class_main.sh
    class main
    user root
    oneshot

on property:vold.decrypt=trigger_restart_framework
    start qcom-c_main-sh

#on property:bluetooth.isEnabled=true
#    start btwlancoex
#    start amp_load
#    write /sys/class/bluetooth/hci0/idle_timeout 7000

#on property:bluetooth.isEnabled=false
#    start amp_unload

service cnd /system/bin/cnd
    class late_start
    socket cnd stream 660 root radio
	user radio
	group system radio
	disabled

service rmt_storage /system/bin/rmt_storage /dev/block/mmcblk0p10 /dev/block/mmcblk0p11 /dev/block/mmcblk0p17
    class late_start
    user root
    disabled

on property:ro.boot.emmc=true
    start rmt_storage

service bridgemgrd /system/bin/bridgemgrd
    class late_start
    user radio
    group radio qcom_diag
    disabled

service port-bridge /system/bin/port-bridge /dev/smd0 /dev/ttyGS0
    class late_start
    user system
    group system inet
    disabled

on property:ro.baseband="msm"
    # Enable BT-DUN only for all msms
    # setprop ro.qualcomm.bluetooth.dun true

service qmiproxy /system/bin/qmiproxy
    class main
    user radio
    group radio qcom_diag
    disabled

# QMUX must be in multiple groups to support external process connections
service qmuxd /system/bin/qmuxd
    class main
    user radio
    group radio audio bluetooth gps qcom_diag
    disabled

service netmgrd /system/bin/netmgrd
    class main
    disabled

service sensors /system/bin/sensors.qcom
    class late_start
    user root
    group root
    disabled

on property:ro.use_data_netmgrd=false
    # netmgr not supported on specific target
    stop netmgrd

# Adjust socket buffer to enlarge TCP receive window for high bandwidth
# but only if ro.data.large_tcp_window_size property is set.
on property:ro.data.large_tcp_window_size=true
    write /proc/sys/net/ipv4/tcp_adv_win_scale  1

service wpa_supplicant /system/bin/wpa_supplicant \
    -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \
    -I/system/etc/wifi/wpa_supplicant_overlay.conf \
    -O/data/misc/wifi/sockets \
    -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0
    #   we will start as root and wpa_supplicant will switch to user wifi
    #   after setting up the capabilities required for WEXT
    #   user wifi
    #   group wifi inet keystore
    class main
    socket wpa_wlan0 dgram 660 wifi wifi
    disabled
    oneshot

service p2p_supplicant /system/bin/wpa_supplicant \
    -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \
    -I/system/etc/wifi/wpa_supplicant_overlay.conf -N \
    -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \
    -I/system/etc/wifi/p2p_supplicant_overlay.conf \
    -O/data/misc/wifi/sockets -puse_p2p_group_interface=1 \
    -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0
#   we will start as root and wpa_supplicant will switch to user wifi
#   after setting up the capabilities required for WEXT
#   user wifi
#   group wifi inet keystore
    class main
    socket wpa_wlan0 dgram 660 wifi wifi
    disabled
    oneshot

#for WiFi MFG(TestMode)
service mfgloader /system/bin/mfgloader
    class main
    disabled
    oneshot

service wlandutservice /system/bin/wlandutservice
    class main
    user system
    group wifi net_raw net_admin system inet
    disabled
    oneshot

service macloader /system/bin/macloader
    class main
    oneshot
# end of wifi

service dhcpcd_wlan0 /system/bin/dhcpcd -aABDKL
    class main
    disabled
    oneshot

service dhcpcd_p2p /system/bin/dhcpcd -aABKL
    class main
    disabled
    oneshot

service dhcpcd_bt-pan /system/bin/dhcpcd -ABKL
    class main
    disabled
    oneshot

service dhcpcd_eth0 /system/bin/dhcpcd -ABKL
    class main
    disabled
    oneshot

service iprenew_wlan0 /system/bin/dhcpcd -n
    class main
    disabled
    oneshot

service iprenew_p2p /system/bin/dhcpcd -n
    class main
    disabled
    oneshot

# I-WLAN
service iwland /system/bin/iwland
    class main
    user root
    oneshot

service wiperiface /system/bin/wiperiface
    user location
    group qcom_oncrpc
    oneshot

service quipc_igsn /system/bin/quipc_igsn
    class late_start
    user gps
    group inet gps
    disabled

service quipc_main /system/bin/quipc_main
    class late_start
    user gps
    group net_admin wifi inet gps
    disabled

service fm_dl /system/bin/sh /system/etc/init.qcom.fm.sh
    class late_start
    user root
    group system qcom_oncrpc
    disabled
    oneshot

on property:crypto.driver.load=1
     insmod /system/lib/modules/qce.ko
     insmod /system/lib/modules/qcedev.ko

on property:crypto.driver.load=0
     exec /system/bin/rmmod qcedev.ko
     exec /system/bin/rmmod qce.ko

service drmdiag /system/bin/drmdiagapp
    class late_start
     user root
     disabled
     oneshot

on property:drmdiag.load=1
    start drmdiag

on property:drmdiag.load=0
    stop drmdiag

service qcom-sh /system/bin/sh /init.qcom.sh
    class late_start
    user root
    oneshot

service qcom-post-boot /system/bin/sh /system/etc/init.qcom.post_boot.sh
    class late_start
    user root
    disabled
    oneshot

#service qcom-wifi /system/bin/sh /system/etc/init.qcom.wifi.sh
#    class late_start
#    oneshot

on property:init.svc.bootanim=stopped
    start qcom-post-boot

on property:sys.boot_completed=1
    start qcom-post-boot

#service abld /system/bin/mm-abl-daemon
#    class late_start
#    disabled

service ds_fmc_appd /system/bin/ds_fmc_appd -p "rmnet0" -D
    class late_start
    group radio
    disabled
    oneshot

on property:persist.data.ds_fmc_app.mode=1
    start ds_fmc_appd

service ims_regmanager /system/bin/exe-ims-regmanagerprocessnative
    class late_start
    user system
    group qcom_oncrpc net_bt_admin inet radio wifi
    disabled

on property:persist.ims.regmanager.mode=1
    start ims_regmanager

on property:ro.data.large_tcp_window_size=true
    # Adjust socket buffer to enlarge TCP receive window for high bandwidth (e.g. DO-RevB)
    write /proc/sys/net/ipv4/tcp_adv_win_scale  1

service time_daemon /system/bin/time_daemon
    class late_start
    user root
    group root
    oneshot
    disabled

on property:persist.timed.enable=true
    start time_daemon

service ril-daemon1 /system/bin/rild -c 1
    class main
    socket rild1 stream 660 root radio
    socket rild-debug1 stream 660 radio system
    user root
    disabled
    group radio cache inet misc audio sdcard_rw qcom_oncrpc diag qcom_diag log

service profiler_daemon /system/bin/profiler_daemon
    class late_start
    user root
    group root
    disabled

service sdcard /system/bin/sdcard /data/media 1023 1023
    class late_start
    disabled

on property:persist.fuse_sdcard=true
    start sdcard

service fuse_sdcard0 /system/bin/sdcard -u 1023 -g 1023 -d /mnt/media_rw/sdcard0 /storage/sdcard0
    class late_start
    disabled

service fuse_sdcard1 /system/bin/sdcard -u 1023 -g 1023 -d /mnt/media_rw/sdcard1 /storage/sdcard1
    class late_start
    disabled

service fuse_usbdisk /system/bin/sdcard -u 1023 -g 1023 -d /mnt/media_rw/usbdisk /storage/usbdisk
    class late_start
    disabled