Add Cyber Power Systems CP850PFCLCD @ 2.7.2

Author: clepple

Cyber_Power_Systems/Cyber_Power_Systems__CP850PFCLCD__usbhid-ups__2.7.2__01.dev

@@ -0,0 +1,47 @@
+# https://github.com/networkupstools/nut/issues/459#issue-248153655
+battery.charge: 100
+battery.charge.low: 10
+battery.charge.warning: 20
+battery.mfr.date: CPS
+battery.runtime: 5100
+battery.runtime.low: 300
+battery.type: PbAcid
+battery.voltage: 16.0	#BAD: UPS returns 24; NUT incorrectly scales.
+# battery.voltage:COMMENT:
+# User provided a dump which showed battery.voltage as an 8-bit value of 24,
+# but the UPS only has 1x 12V battery pack. The following comment from the
+# CP1500PFCLCD entry probably applies:
+# "CyberPower states that battery voltage is not supported in this model of UPS.
+# It's not even shown in their 'PowerPanel' software."
+# battery.voltage:EOC
+battery.voltage.nominal: 24	#BAD: see comments for `battery.voltage`
+device.mfr: CPS
+device.model: CP850PFCLCD
+device.serial: 000000000000
+device.type: ups
+driver.name: usbhid-ups
+driver.parameter.pollfreq: 30
+driver.parameter.pollinterval: 2
+driver.parameter.port: auto
+driver.version: 2.7.2
+driver.version.data: CyberPower HID 0.3
+driver.version.internal: 0.38
+input.transfer.high: 136
+input.transfer.low: 88
+input.voltage: 119.0
+input.voltage.nominal: 120
+output.voltage: 136.0	#BAD: See https://github.com/networkupstools/nut/issues/439
+ups.beeper.status: enabled
+ups.delay.shutdown: 20
+ups.delay.start: 30
+ups.load: 5
+ups.mfr: CPS
+ups.model: CP850PFCLCD
+ups.productid: 0501
+ups.realpower.nominal: 510
+ups.serial: 000000000000
+ups.status: OL
+ups.test.result: Done and passed
+ups.timer.shutdown: -60
+ups.timer.start: -60
+ups.vendorid: 0764