Provided M2.5 self-tapping screws *will* split Clockwork2_Euclid_MGN12X_RIGHT_Carriage_Ver2.stl

[docpayce]

On the main Voron installation guide:
https://euclidprobe.github.io/02c_Voron2.html#clockwork2--stealthburner-native-mounts

it is mentioned under section "Clockwork2 & Stealthburner Native Mounts" that

The left and right halves of the native carriage shells for Voron Stealthburner / CW2 / Clockwork 2 have been modified to accept the probe with M2.5 self tapping screws from underneath.

Though the provided screws in the kit are to long to fit and will split the printed part "Clockwork2_Euclid_MGN12X_RIGHT_Carriage_Ver2.stl" (Link) open rendering it unusable.

I would strongly suggest to implement the mounting holes either deeper or as full thru-holes instead of pocket holes. As an alternative, heatset inserts may be a more viable solution, too, certainly preventing splitting the printed part in that kind of delicate area.