xmas-tree.ino

/*
 * Christmas tree by designer2k2.at
 * Stephan Martin 2016
 * http://www.designer2k2.at
 * https://github.com/designer2k2/xmas-tree
 * 
 * This code is made to run on a Digispark
 * Feeding Neopixel Rings, stacked to a tree.
 * 
 * Brightness is reduced as there is only USB power supply.
 * 
 */


#include <Adafruit_NeoPixel.h>    //needed for the WS2812
#include <avr/pgmspace.h>		      //needed for PROGMEM

#define PIN 1					            //Pin 1 is DATA In on the bottom Ring
#define BRIGHTNESS 10 			      // brightness reduced


//Lookups for the X-M-A-S Letters viewed from above:
 const unsigned int charX[] PROGMEM = 
 { 
   4,27,54,61,58,35,16,10,31,56,60,39,22
 };
 const unsigned int charM[] PROGMEM = 
 { 
   4,26,25,40,22,39,60,61,58,35,16,34,33,32,10
 };
  const unsigned int charA[] PROGMEM = 
 { 
   4,27,42,53,60,51,37,19,49,58,57,61,46,31,10
 };
  const unsigned int charS[] PROGMEM = 
 { 
  22,38,37,36,35,34,47,57,61,53,41,26,27,28,29,30,10
 };

 //Lookup for the Candle light
 const unsigned int candles[] PROGMEM = 
 { 
  15,10,48,45,36,19,59,29,5,43,41,39,24,3,61
 };


// Parameter 1 = number of pixels in strip
// Parameter 2 = Arduino pin number (most are valid)
// Parameter 3 = pixel type flags, add together as needed:
//   NEO_KHZ800  800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
//   NEO_KHZ400  400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
//   NEO_GRB     Pixels are wired for GRB bitstream (most NeoPixel products)
//   NEO_RGB     Pixels are wired for RGB bitstream (v1 FLORA pixels, not v2)
Adafruit_NeoPixel strip = Adafruit_NeoPixel(61, PIN, NEO_GRB + NEO_KHZ800);

// IMPORTANT: To reduce NeoPixel burnout risk, add 1000 uF capacitor across
// pixel power leads, add 300 - 500 Ohm resistor on first pixel's data input
// and minimize distance between Arduino and first pixel.  Avoid connecting
// on a live circuit...if you must, connect GND first.

void setup() {
  pinMode(PIN, OUTPUT);
  strip.begin();
  strip.setBrightness(BRIGHTNESS); // set brightness
  strip.show(); // Initialize all pixels to 'off'
  
  //2x XMAS Letters:
  xmas();
  delay(2000);
  xmas();
  delay(2000);
  
}

void loop() {
  
  //Tree light:
  tree();
  delay(10000);

  //Color crazy:
  colorcrazy();
  //delay(1000);
  

  /*
  // Some example procedures showing how to display to the pixels:
  colorWipe(strip.Color(255, 0, 0), 50); // Red
  colorWipe(strip.Color(0, 255, 0), 50); // Green
  colorWipe(strip.Color(0, 0, 255), 50); // Blue
  // Send a theater pixel chase in...
  theaterChase(strip.Color(127, 127, 127), 50); // White
  theaterChase(strip.Color(127,   0,   0), 50); // Red
  theaterChase(strip.Color(  0,   0, 127), 50); // Blue

  rainbow(20);
  rainbowCycle(20);
  theaterChaseRainbow(50);
*/
}

//Sub-----------------------------------------------------------------------

//This drives the WS2812 in a crazy pattern, fun!
void colorcrazy(){ 
  colorWipe(strip.Color(255, 0, 0), 25); // Red
  colorWipe(strip.Color(0, 255, 0), 25); // Green
  colorWipe(strip.Color(0, 0, 255), 25); // Blue
  
  for (int i = 0; i < 10; i++)
  {
    theaterChaseRainbow(5);
  }  
  
  colorWipe(strip.Color(0, 0, 0), 0); // Black
  
}

//This lights up the tree in green, then add the white "candles"
void tree(){

  colorWipe(strip.Color(0, 50, 0), 50); // Green

  //light "candles"
  //Show the S:
  for (int i = 0; i < 16; i++)
  {
    strip.setPixelColor(pgm_read_word(&candles[i])-1,strip.Color(255, 255, 255));
    strip.show();
    delay(50);
  }

}

//This shows the X-M-A-S when viewed from above
void xmas(){

  colorWipe(strip.Color(0, 0, 0), 0); // blank

  
  //The size of the PROGMEM is hardcoded, as the sizeof does return crap on the ATtiny.
  
  //Show the X:
  for (int i = 0; i < 13; i++)
  {
    strip.setPixelColor(pgm_read_word(&charX[i])-1,strip.Color(255, 0, 0));
        strip.show();
    delay(50);
  }
  delay(1000);
  colorWipe(strip.Color(0, 0, 0), 0); // blank

  //Show the M:
  for (int i = 0; i < 15; i++)
  {
    strip.setPixelColor(pgm_read_word(&charM[i])-1,strip.Color(0, 255, 0));
    strip.show();
    delay(50);
  }
  delay(1000);
  colorWipe(strip.Color(0, 0, 0), 0); // blank

  //Show the A:
  for (int i = 0; i < 15; i++)
  {
    strip.setPixelColor(pgm_read_word(&charA[i])-1,strip.Color(0, 0, 255));
    strip.show();
    delay(50);
  }
  delay(1000);
  colorWipe(strip.Color(0, 0, 0), 0); // blank

  //Show the S:
  for (int i = 0; i < 17; i++)
  {
    strip.setPixelColor(pgm_read_word(&charS[i])-1,strip.Color(125, 125, 125));
    strip.show();
    delay(50);
  }
  delay(1000);
  colorWipe(strip.Color(0, 0, 0), 0); // blank
  
}

// Fill the dots one after the other with a color
void colorWipe(uint32_t c, uint8_t wait) {
  for(uint16_t i=0; i<strip.numPixels(); i++) {
      strip.setPixelColor(i, c);
      strip.show();
      delay(wait);
  }
}

void rainbow(uint8_t wait) {
  uint16_t i, j;

  for(j=0; j<256; j++) {
    for(i=0; i<strip.numPixels(); i++) {
      strip.setPixelColor(i, Wheel((i+j) & 255));
    }
    strip.show();
    delay(wait);
  }
}

// Slightly different, this makes the rainbow equally distributed throughout
void rainbowCycle(uint8_t wait) {
  uint16_t i, j;

  for(j=0; j<256*5; j++) { // 5 cycles of all colors on wheel
    for(i=0; i< strip.numPixels(); i++) {
      strip.setPixelColor(i, Wheel(((i * 256 / strip.numPixels()) + j) & 255));
    }
    strip.show();
    delay(wait);
  }
}

//Theatre-style crawling lights.
void theaterChase(uint32_t c, uint8_t wait) {
  for (int j=0; j<10; j++) {  //do 10 cycles of chasing
    for (int q=0; q < 3; q++) {
      for (int i=0; i < strip.numPixels(); i=i+3) {
        strip.setPixelColor(i+q, c);    //turn every third pixel on
      }
      strip.show();
     
      delay(wait);
     
      for (int i=0; i < strip.numPixels(); i=i+3) {
        strip.setPixelColor(i+q, 0);        //turn every third pixel off
      }
    }
  }
}

//Theatre-style crawling lights with rainbow effect
void theaterChaseRainbow(uint8_t wait) {
  for (int j=0; j < 256; j++) {     // cycle all 256 colors in the wheel
    for (int q=0; q < 3; q++) {
        for (int i=0; i < strip.numPixels(); i=i+3) {
          strip.setPixelColor(i+q, Wheel( (i+j) % 255));    //turn every third pixel on
        }
        strip.show();
       
        delay(wait);
       
        for (int i=0; i < strip.numPixels(); i=i+3) {
          strip.setPixelColor(i+q, 0);        //turn every third pixel off
        }
    }
  }
}

// Input a value 0 to 255 to get a color value.
// The colours are a transition r - g - b - back to r.
uint32_t Wheel(byte WheelPos) {
  WheelPos = 255 - WheelPos;
  if(WheelPos < 85) {
   return strip.Color(255 - WheelPos * 3, 0, WheelPos * 3);
  } else if(WheelPos < 170) {
    WheelPos -= 85;
   return strip.Color(0, WheelPos * 3, 255 - WheelPos * 3);
  } else {
   WheelPos -= 170;
   return strip.Color(WheelPos * 3, 255 - WheelPos * 3, 0);
  }
}