You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Installed Distrod (via install.sh) in an existing WSL2 distro Ubuntu 22.04.1 LTS (Jammy Jellyfish).
There is a pre-existing Debian distro with Distrod (via install.sh) that seems to work OK.
As soon as the Ubuntu distro is started vmmem process gets about 15% CPU as stated by Windows Task Manager.
Inside the distro:
top shows systemd at 100% CPU.
systemctl hangs for a while then spits: Failed to list units: Transport endpoint is not connected
sudo grep 'Distrod:' /dev/kmsg just hangs forever
As soon as the Ubuntu distro is stopped (wls -t Ubuntu) vmmem process goes down to 0% CPU.
I see nothing particularly wrong in the Distrod trace log.
I installed another Ubuntu 22.04 distro via distrod_wsl_launcher.exe and it works as expected.
@psmolkin
systemd 249.11-0ubuntu3.6
And it is the same version that is working in the other ubuntu distro which was installed via distrod_wsl_launcher.exe.
Describe the bug
Installed Distrod (via install.sh) in an existing WSL2 distro Ubuntu 22.04.1 LTS (Jammy Jellyfish).
There is a pre-existing Debian distro with Distrod (via install.sh) that seems to work OK.
As soon as the Ubuntu distro is started vmmem process gets about 15% CPU as stated by Windows Task Manager.
Inside the distro:
top
shows systemd at 100% CPU.systemctl
hangs for a while then spits: Failed to list units: Transport endpoint is not connectedsudo grep 'Distrod:' /dev/kmsg
just hangs foreverAs soon as the Ubuntu distro is stopped (wls -t Ubuntu) vmmem process goes down to 0% CPU.
I see nothing particularly wrong in the Distrod trace log.
I installed another Ubuntu 22.04 distro via distrod_wsl_launcher.exe and it works as expected.
Steps to reproduce
See above.
Expected behavior
systemd works
Windows version
Windows 10 21H2 19044.2006
Linux kernel version
5.10.102.1-microsoft-standard-WSL2
Distro
Ubuntu 22.04
How did you install that distro?
Enabled
distrod
in an existing WSL2 distroLogs
[Distrod][DEBUG] distrod-exec: exec_command_in_distro
[Distrod][DEBUG] starting /init from distrod-exec
[Distrod][DEBUG] WSL envs: "WSL_DISTRO_NAME" = "Ubuntu"
[Distrod][DEBUG] WSL envs: "WSL_INTEROP" = "/run/WSL/12_interop"
[Distrod][DEBUG] WSL envs: "WSLENV" = "WT_SESSION::WT_PROFILE_ID"
[Distrod][DEBUG] Container::with_mount source: Some(HostPath("/run/distrod/cmdline")), target: ContainerPath("/proc/cmdline"), fstype: None, flags: MS_BIND, is_file: true
[Distrod][TRACE] mount_distrod_run_files: path: "/opt/distrod/run/systemd"
[Distrod][TRACE] mount_distrod_run_files: path: "/opt/distrod/run/systemd/system"
[Distrod][TRACE] mount_distrod_run_files: path: "/opt/distrod/run/systemd/system/portproxy.service"
[Distrod][DEBUG] Container::with_mount source: Some(HostPath("/opt/distrod/run/systemd/system/portproxy.service")), target: ContainerPath("/run/systemd/system/portproxy.service"), fstype: None, flags: MS_BIND, is_file: true
[Distrod][TRACE] mount_distrod_run_files: path: "/opt/distrod/run/systemd/system/systemd-tmpfiles-clean.service.d"
[Distrod][TRACE] mount_distrod_run_files: path: "/opt/distrod/run/systemd/system/systemd-tmpfiles-clean.service.d/exclude_wslg_sockets.conf"
[Distrod][DEBUG] Container::with_mount source: Some(HostPath("/opt/distrod/run/systemd/system/systemd-tmpfiles-clean.service.d/exclude_wslg_sockets.conf")), target: ContainerPath("/run/systemd/system/systemd-tmpfiles-clean.service.d/exclude_wslg_sockets.conf"), fstype: None, flags: MS_BIND, is_file: true
[Distrod][TRACE] mount_distrod_run_files: path: "/opt/distrod/run/systemd/system/systemd-tmpfiles-setup.service.d"
[Distrod][TRACE] mount_distrod_run_files: path: "/opt/distrod/run/systemd/system/systemd-tmpfiles-setup.service.d/exclude_wslg_sockets.conf"
[Distrod][DEBUG] Container::with_mount source: Some(HostPath("/opt/distrod/run/systemd/system/systemd-tmpfiles-setup.service.d/exclude_wslg_sockets.conf")), target: ContainerPath("/run/systemd/system/systemd-tmpfiles-setup.service.d/exclude_wslg_sockets.conf"), fstype: None, flags: MS_BIND, is_file: true
[Distrod][TRACE] mount_distrod_run_files: path: "/opt/distrod/run/tmpfiles.d"
[Distrod][TRACE] mount_distrod_run_files: path: "/opt/distrod/run/tmpfiles.d/x11.conf"
[Distrod][DEBUG] Container::with_mount source: Some(HostPath("/opt/distrod/run/tmpfiles.d/x11.conf")), target: ContainerPath("/run/tmpfiles.d/x11.conf"), fstype: None, flags: MS_BIND, is_file: true
[Distrod][DEBUG] DistroLauncher::launch
[Distrod][DEBUG] Container::with_mount source: Some(HostPath("/run/distrod/distrod_wsl_env-uid1000")), target: ContainerPath("/run/distrod/distrod_wsl_env-uid1000"), fstype: None, flags: MS_BIND, is_file: true
[Distrod][DEBUG] Spawning the command or the waiter.
[Distrod][DEBUG] Executing a command in the distro.
[Distrod][DEBUG] Failed to ignore signal Sys(EINVAL)
[Distrod][DEBUG] Failed to ignore signal Sys(EINVAL)
[Distrod][DEBUG] Distro::exec_command.
[Distrod][DEBUG] Container::exec_command.
[Distrod][DEBUG] Triple fork done.
[Distrod][TRACE] mounting source: Some(
ContainerPath(
"/run/distrod/cmdline",
),
), mount: ContainerMount { source: Some(HostPath("/run/distrod/cmdline")), target: ContainerPath("/proc/cmdline"), fstype: None, flags: MS_BIND, data: None, is_file: true }
[Distrod][TRACE] mounting source: Some(
ContainerPath(
"/opt/distrod/run/systemd/system/portproxy.service",
),
), mount: ContainerMount { source: Some(HostPath("/opt/distrod/run/systemd/system/portproxy.service")), target: ContainerPath("/run/systemd/system/portproxy.service"), fstype: None, flags: MS_BIND, data: None, is_file: true }
[Distrod][DEBUG] dropping privilege. kmsg logging in the child ends here.
[Distrod][TRACE] mounting source: Some(
ContainerPath(
"/opt/distrod/run/systemd/system/systemd-tmpfiles-clean.service.d/exclude_wslg_sockets.conf",
),
), mount: ContainerMount { source: Some(HostPath("/opt/distrod/run/systemd/system/systemd-tmpfiles-clean.service.d/exclude_wslg_sockets.conf")), target: ContainerPath("/run/systemd/system/systemd-tmpfiles-clean.service.d/exclude_wslg_sockets.conf"), fstype: None, flags: MS_BIND, data: None, is_file: true }
[Distrod][DEBUG] The parent of the second of three forks exits.
[Distrod][TRACE] mounting source: Some(
ContainerPath(
"/opt/distrod/run/systemd/system/systemd-tmpfiles-setup.service.d/exclude_wslg_sockets.conf",
),
), mount: ContainerMount { source: Some(HostPath("/opt/distrod/run/systemd/system/systemd-tmpfiles-setup.service.d/exclude_wslg_sockets.conf")), target: ContainerPath("/run/systemd/system/systemd-tmpfiles-setup.service.d/exclude_wslg_sockets.conf"), fstype: None, flags: MS_BIND, data: None, is_file: true }
[Distrod][DEBUG] Spawning the command or the waiter.
[Distrod][TRACE] mounting source: Some(
ContainerPath(
"/opt/distrod/run/tmpfiles.d/x11.conf",
),
), mount: ContainerMount { source: Some(HostPath("/opt/distrod/run/tmpfiles.d/x11.conf")), target: ContainerPath("/run/tmpfiles.d/x11.conf"), fstype: None, flags: MS_BIND, data: None, is_file: true }
[Distrod][DEBUG] Spawning the waiter.
[Distrod][TRACE] skipping an identical mount: Some(
ContainerPath(
"/run/distrod/distrod_wsl_env-uid1000",
),
), ContainerMount {
source: Some(
HostPath(
"/run/distrod/distrod_wsl_env-uid1000",
),
),
target: ContainerPath(
"/run/distrod/distrod_wsl_env-uid1000",
),
fstype: None,
flags: MS_BIND,
data: None,
is_file: true,
}
[Distrod][DEBUG] Failed to ignore signal Sys(EINVAL)
[Distrod][DEBUG] Failed to ignore signal Sys(EINVAL)
additional comment
No response
The text was updated successfully, but these errors were encountered: