-
Notifications
You must be signed in to change notification settings - Fork 22
Home
Alastair D'Silva edited this page Dec 15, 2016
·
28 revisions
Welcome to the qemu wiki!
-
NCSI support
-
currently only a fake slirp backend.
-
I2C
-
OCC model
-
BT device (part of the LPC Controller)
- provide a backend for an external connection with the pnv platform.
- host simulator ?
-
GPIO Controller
-
should be useful for debug.
-
RX8900 INT line should be connected to GPIOJ0 for Witherspoon (This is needed if RTC alarms are used)
-
VUART Controller
- over LPC
- use -chardev for external connection
-
Clock infrastructure
- Derive clock rates from strapping and SCU clock registers
-
Static memory
-
boot from flash. requires TCG modification to boot from a MMIO region. Complex.
-
command mode support to upstream
-
dma support to upstream
-
model option for the command line ?
-
Network FTGMAC100
-
basic support seems stable
-
fix u-boot support
-
check missing features before upstream
-
I2C
-
tmp42{123} device model
-
rx8900 RTC
-
Watch dog
- fixes required for linux reboot. done.
- to upstream
-
SuperIO
- required For OpenPOWER systems to access the flash. Will change in P9.
- Romulus support
- requires some change to configure a second CS. use HW strapping SCU70[WDT2]
- target-arm: Add VBAR support to ARM1176 CPUs. See this patch.
- smc: DMA and command mode
- romulus
- watchdog
- ftgmac100 ?
- smc: segment registers support
- smc: ast2500 support. two spi controllers.
- ast2500 SoC
- ast2500 evaluation board
- SDMC controller
- i2c controller
- scu controller
- smc controller
- timer controller
- interrupt controller
- ast2400 SoC
- palmetto-bmc machine