Skip to content

Latest commit

 

History

History
116 lines (89 loc) · 4.26 KB

hi3559v200-som-en.md

File metadata and controls

116 lines (89 loc) · 4.26 KB
Raw

Hi3559V200-SOM-BaseBoard

Author: thomas@hiview-tech.cn

Hi3559V200

  • 1, Dual-core ARM A7-900;
  • 2, 4K@30FPS venc/vdec;
  • 3, MIPI-CSI 4L/2Lx2 input;
  • 4, MIPI-DSI 4L/LCD/HDMI output;
  • 5, 0.4Tops Neural network acceleration engine;

SOM

  • 1, DDR3 1GByte;
  • 2, SPI-NAND 512MByte;
  • 3, 180Pin Full function connector;

BaseBoard

  • 1, DC12V, UART0, USB2.0, SDCard, HDMI1.4;
  • 2, RTL8189FTV-WIFI, MIPI-CSI, MIPI-DSI;
  • 3, KEY,LED,GPIO,UART1,RS485,AUDIO-IN-OUT;

SOM-BaseBord Specification

https://github.com/openhisilicon/PRODUCT/blob/master/HI3559V200_SOM%20datasheet%20_E.pdf

Quick Use Guide

serial console

  • J10 slot
  • Baud rate -115200
  • Data bit -8
  • Parity - none
  • Stop bit -1
  • Flow control - None

Terminal of network

  • Default IP of the board: 192.168.0.2
  • Telnet/SSH username: root, password: hiview

startup script

  • /etc/init.d/S99app Start /factory/startup.sh
  • /factory/startup.sh Initialize the network IP, unpack if there is an upgrade package file, and start /app/startapp.sh
  • /factory/cfg/bsp_def.json Save the default parameters that are not modified by the end user. The sensor type is configured in this file
  • /app/startapp.sh Initialize the environment variables, start the bsp.exe,codec.exe,svp.exe,...

FAQ

  • How do compile APP (https://www.bilibili.com/video/BV1PP4y1P79i)

  • How do use the left space in FLASH

    • current uboot MTD partitions: uboot:1M, kernel: 4M, rootfs: 120M, user: 387M (not use)
    • To use a user partition, do the following:
    • 1 Format the UBI partition (do this only once):
      • ubiformat /dev/mtd3
      • ubiattach /dev/ubi_ctrl -m 3
      • ubinfo /dev/ubi1
      • ubimkvol /dev/ubi1 -N user -s xxxMiB (xxx from the ubinfo command output available space size, delete the volume if you type incorrectly: ubirmvol /dev/ubi1 -N user)
      • mount -t ubifs /dev/ubi1_0 /mnt/
      • 2 mount UBI partition (mount is required every powered on):
        • ubiattach /dev/ubi_ctrl -m 3
        • mount -t ubifs /dev/ubi1_0 /mnt/

  • How do open USB-NET

    • Hi3559V200 no ETH-PHY interface. you can be used the USB-gadget virtual network port or the USB2ETH network port converter.

    • Use USB-Host mode and purchase a USB2ETH connector

      • download uImage-uhost file [Please contact us for download]
      • You can download uimage-Uhost to the board through the HiTool burn tool or burn it as follows:
      • flash_erase /dev/mtd1 0 0
      • nandwrite -p /dev/mtd1 uImage-uhost

    • Use USB-Device mode to enable the USB-gadget virtual network port operation as follows:

      • Please refer to installing the USBRNDIS drivers on the Windows: /ReleaseDoc/en/01.software/board/OSDRV/Peripheral Driver Operation Guide.doc [1.2.3.6 Using the Composite Device Function of the USB Device Under Kernel]
      • Execute on the device side:
        • mv /app/startapp.sh /app/startapp.sh.bak
        • reboot
        • /app/usbgadget/usb.sh
        • /app/startapp.sh.bak

  • How do USB-BURN

    • Please reference /ReleaseDoc/en/01.software/pc/HiTool/HiBurn User Guide.pdf [1.5 Environment Preparation]
    • Note: Switch update-key to GND when powering on. If WIN10 cannot find the device, please use WIN7

  • WIN10 can not use USB burning problem

    • In Win10, Hitool manually controls USB burning

    • (Keep update-key in "Update" mode, i.e. serial port upgrade mode)

      • 1, Open Hitool and select a CPU type;
      • 2, Configure Hitool, select serial port burning mode, only burn boot partition;
      • 3, Configure Hitool, select usb burning mode, and select other partitions except boot;
      • 4, Enter "usb device" in uboot;
      • 5, Click "Burn". When you see the following message from Hitool, reset the board, enter "usb device" again in uboot; # ---- 100% Boot download completed!
      • 6, Wait for the completion of burning;

  • Burn files link：https://pan.baidu.com/s/1k525rZtWp54Xfu4Ie1C1rA code：drf7