Skip to content

Latest commit

 

History

History
296 lines (222 loc) · 13.7 KB

cli.md

File metadata and controls

296 lines (222 loc) · 13.7 KB

s2i command line interface

This document describes thoroughly all s2i subcommands and flags with explanation of their purpose as well as an example usage.

Currently s2i has five subcommands, each of which will be described in the following sections of this document:

Before diving into each of the aforementioned commands, let's have a closer look at common flags that can be used with all of the subcommands.

Name Description
-h (--help) Display help for the specified command
--loglevel Set the level of log output (0-5) (see Log levels)
-U (--url) URL of the Docker socket to use (default: unix:///var/run/docker.sock)

Log levels

There are six log levels:

  • Level 0 - produces output from containers running assemble and assemble-runtime scripts and all encountered errors
  • Level 1 - produces basic information about the executed process
  • Level 2 - produces very detailed information about the executed process
  • Level 3 - produces very detailed information about the executed process, along with listing tar contents
  • Level 4 - currently produces same information as level 3
  • Level 5 - produces very detailed information about the executed process, lists tar contents, Docker Registry credentials, and copied source files

NOTE: All of the commands and flags are case sensitive!

s2i create

The s2i create command is responsible for bootstrapping a new S2I enabled image repository. This command will generate a skeleton .s2i directory and populate it with sample S2I scripts you can start hacking on.

Usage:

$ s2i create <image name> <destination directory>

s2i build

The s2i build command is responsible for building the Docker image by combining the specified builder image and sources. The resulting image will be named according to the tag parameter.

Usage:

$ s2i build <source location> <builder image> [<tag>] [flags]

The build command parameters are defined as follows:

  1. source location - the URL of a Git repository or a local path to the source code
  2. builder image - the Docker image to be used in building the final image
  3. tag - the name of the final Docker image (if provided)

If the build image is compatible with incremental builds, s2i build will look for an image tagged with the same name. If an image is present with that tag and a save-artifacts script is present in the scripts directory, s2i build will save the build artifacts from that image and add them to the tar streamed to the container into /artifacts.

Build flags

Name Description
-u (--allowed-uids) Specify a range of allowed user ids for the builder and runtime images. Ranges can be bounded (1-10001) or unbounded (1-).
-n (--application-name) Specify the display name for the application (default: output image name)
--as-dockerfile Output a Dockerfile to this path instead of building a new image
--assemble-user Specify the user to run assemble with
--assemble-runtime-user Specify the user to run assemble-runtime with
--callback-url URL to be invoked after a build (see Callback URL)
--cap-drop Specify a comma-separated list of capabilities to drop when running Docker containers
--context-dir Specify the sub-directory inside the repository with the application sources
-c (--copy) Use local file system copy instead of git cloning the source url (allows for inclusion of empty directories and uncommitted files)
--description Specify the description of the application
-d (--destination) Location where the scripts and sources will be placed prior doing build (see S2I Scripts)
--dockercfg-path The path to the Docker configuration file
-e (--env) Environment variable to be passed to the builder eg. NAME=VALUE
-E (--environment-file) Specify the path to the file with environment
--exclude Regular expression for selecting files from the source tree to exclude from the build, where the default excludes the '.git' directory (see https://golang.org/pkg/regexp for syntax, but note that "" will be interpreted as allow all files and exclude no files)
--ignore-submodules Ignore all git submodules when cloning application repository. (defaults to false)
--incremental Try to perform an incremental build
--incremental-pull-policy Specify when to pull the previous image for incremental builds (always, never or if-not-present) (default "if-not-present")
-i (--inject) Inject the content of the specified directory into the path in the container that runs the assemble script
--network Specify the default Docker Network name to be used in build process
-p (--pull-policy) Specify when to pull the builder image (always, never or if-not-present. Defaults to if-not-present)
-q (--quiet) Operate quietly, suppressing all non-error output
-r (--ref) A branch/tag that the build should use instead of MASTER (applies only to Git source)
--rm Remove the previous image during incremental builds
--run Launch the resulting image after a successful build. All output from the image is being printed to help determine image's validity. In case of a long running image you will have to Ctrl-C to exit both s2i and the running container. (defaults to false)
-a (--runtime-artifact) Specify a file or directory to be copied from the builder to the runtime image (see How to use a non-builder image for the final application image)
--runtime-image Image that will be used as the base for the runtime image (see How to use a non-builder image for the final application image)
--runtime-pull-policy Specify when to pull the runtime image (always, never or if-not-present) (default "if-not-present")
--save-temp-dir Save the working directory used for fetching scripts and sources
-s (--scripts-url) URL of S2I scripts (see S2I Scripts)
--use-config Store command line options to .s2ifile
-v (--volume) Bind mounts a local directory into the container that runs the assemble script

Context directory

In the case where your application resides in a directory other than your repository root folder, you can specify that directory using the --context-dir parameter. The specified directory will be used as your application root folder.

Injecting directories to build

If you want to inject files that should only be available during the build (ie when the assemble script is invoked), you can specify the directories from which the files will be copied into the container that runs the assemble script. To do so you can invoke S2I as follows:

$ s2i build --inject /mydir:/container/dir file://source builder-image output-image

In this case the content of the /mydir directory will get copied into /container/dir inside the container which runs the assemble script. After the assemble script finishes, all files copied will be truncated and thus not available in the output image. The files are truncated instead of deleted because the user under which we run the container with the assemble script might not have permissions to delete files in the destination directory (eg. /etc/ssl).

You can also specify multiple directories, for example: --inject /dir1:/container/dir1 --inject /dir2:container/dir2.

You can use this feature to provide SSL certificates, private configuration files which contains credentials, etc.

Callback URL

Upon completion (or failure) of a build, s2i can execute a HTTP POST to a URL with information about the build:

  • success - flag indicating the result of the build process (true or false)
  • labels - labels of the resulting image

Example: data posted will be in the form:

{
    "success": true,
    "labels": {
        "io.k8s.display-name": "my-app",
        "io.openshift.s2i.build.image": "builder-image:latest",
        ...
    }
}

Example Usage

Build a Ruby application from a Git source, using the official ruby-23-centos7 builder image, the resulting image will be named ruby-app:

$ s2i build https://github.com/openshift/ruby-hello-world centos/ruby-23-centos7 ruby-app

Build a Node.js application from a local directory, using a local image, the resulting image will be named nodejs-app:

$ s2i build /home/user/nodejs-app local-nodejs-builder nodejs-app

In case of building from the local directory, the sources will be copied into the builder images using plain filesystem copy if the Git binary is not available. In that case the output image will not have the Git specific labels. Use this method only for development or local testing.

NOTE: All your changes have to be committed by git in order to build them with S2I.

Build a Java application from a Git source, using the official openshift/wildfly-101-centos7 builder image but overriding the scripts URL from local directory. The resulting image will be named java-app:

$ s2i build --scripts-url=file://s2iscripts --ref=7.1.x --context-dir=kitchensink https://github.com/jboss-developer/jboss-eap-quickstarts openshift/wildfly-101-centos7 java-app

Build a Ruby application from a Git source, specifying ref, and using the official ruby-23-centos7 builder image. The resulting image will be named ruby-app:

$ s2i build --ref=my-branch https://github.com/openshift/ruby-hello-world centos/ruby-23-centos7 ruby-app

NOTE: If the ref is invalid or not present in the source repository then the build will fail.

Build a Ruby application from a Git source, overriding the scripts URL from a local directory, and specifying the scripts and sources be placed in /opt directory:

$ s2i build --scripts-url=file://s2iscripts --destination=/opt https://github.com/openshift/ruby-hello-world centos/ruby-23-centos7 ruby-app

s2i rebuild

The s2i rebuild command is used to rebuild an image already built using S2I, or the image that contains the required S2I labels. The rebuild will read the S2I labels and automatically set the builder image, source repository and other configuration options used to build the previous image according to the stored labels values.

Optionally, you can set the new image name as a second argument to the rebuild command.

Usage:

$ s2i rebuild <image name> [<new-tag-name>]

s2i generate

This command is a Technology Preview feature, and is subject to change or be removed without notice in a future release.

The s2i generate command generates a Dockerfile using an existing S2I builder image that can be used to produce an image by any application supporting the format.

The builder name is a reference to the builder image that serves as the base of the generated Dockerfile. For example, docker.io/centos/nodejs-10-centos7:latest.

Usage:

$ s2i generate <builder image> <output file>

Example usage

Generate a Dockerfile for the centos/nodejs-10-centos7 builder image:

$ s2i generate docker.io/centos/nodejs-10-centos7 Dockerfile.gen

s2i usage

The s2i usage command starts a container and runs the usage script which prints information about the builder image. This command expects builder image name as the only parameter.

Usage:

$ s2i usage <builder image> [flags]

Usage flags

Name Description
-d (--destination) Location where the scripts and sources will be placed prior invoking usage (see S2I Scripts)
-e (--env) Environment variable passed to the builder eg. NAME=VALUE)
-p (--pull-policy) Specify when to pull the builder image (always, never or if-not-present)
--save-temp-dir Save the working directory used for fetching scripts and sources
-s (--scripts-url) URL of S2I scripts (see Scripts URL)

Example Usage

Print the official ruby-23-centos7 builder image usage:

$ s2i usage centos/ruby-23-centos7

s2i version

The s2i version command prints the version of S2I currently installed.

s2i help

The s2i help command prints help either for the s2i itself or for the specified subcommand.

Example Usage

Print the help page for the build command:

$ s2i help build

Note: You can also accomplish this with:

$ s2i build --help