Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

我家云可以引导启动了 #1680

Closed
liubin7913 opened this issue Sep 5, 2023 · 23 comments
Closed

我家云可以引导启动了 #1680

liubin7913 opened this issue Sep 5, 2023 · 23 comments
Labels
documentation Improvements or additions to documentation new box Research Fills in the Blanks support This need is supported

Comments

@liubin7913
Copy link

最新的Armbian_23.08.0_rockchip_l1pro_bookworm_6.1.50_server_2023.09.02.img或Armbian_23.08.0_rockchip_l1pro_bullseye_6.1.50_server_2023.09.02.img,刷u盘还是写emmc,还是不能引导

@liubin7913
Copy link
Author

刚刚测试依旧无法引导启动

@aaa7260
Copy link

aaa7260 commented Sep 8, 2023

同样的问题,屏幕不显示,换loader也不行

@ophub
Copy link
Owner

ophub commented Sep 9, 2023

路由器里能找到启动的IP吗?ssh能访问吗?

@aaa7260
Copy link

aaa7260 commented Sep 9, 2023

路由器可以看到ip,ssh连接不上,wind网盘:
https://cloud.189.cn/web/share?code=vA736bn2EfEb
密码3997

@ophub
Copy link
Owner

ophub commented Sep 9, 2023

Armbian_22.05.0-trunk_Chainedbox-wind_buster_current_5.15.32
你是说这个文件可以正常使用?网络和HDMI都正常?

@aaa7260
Copy link

aaa7260 commented Sep 9, 2023

是的,大佬

@ophub
Copy link
Owner

ophub commented Sep 9, 2023

好的,10分钟后给你出一个试试,使用这个固件的u-boot和dtb

@aaa7260
Copy link

aaa7260 commented Sep 9, 2023

谢谢大佬,我觉得你的dtb好些

@ophub
Copy link
Owner

ophub commented Sep 9, 2023

https://github.com/ophub/amlogic-s9xxx-armbian/releases/download/Armbian_bullseye_save_2023.09/Armbian_23.08.0_rockchip_chainedbox_bullseye_5.15.131_server_2023.09.08.img.gz

你下载这个测试下,看看能不能正常使用,这个的dtb和u-boot都是复制的你发的固件的。
如果可以,你再试试改dtb为之前的,修改 /boot/armbianEnv.txt 文件,修改里面dtb的文件名为:rk3328-l1pro-1296mhz.dtb。保存重启看看能不能用。

反馈下默认固件的情况和修改后的情况。

@aaa7260
Copy link

aaa7260 commented Sep 9, 2023

感谢大佬,你太敬业了,这个版本可以上了

@ophub
Copy link
Owner

ophub commented Sep 9, 2023

你替换了dtb试了没?默认这个是没法维护的dtb,原来固件里的,你修改 /boot/armbianEnv.txt 文件,修改里面dtb的文件名为:rk3328-l1pro-1296mhz.dtb。保存重启看看能不能用。如果这个能用就是完美方案,这个dtb有f大不断维护。

把ssh进去的界面接个图,把这个命令(cat /etc/ophub-release)看到的结果也截个图,很久没看到这个设备能上线了

@ophub ophub changed the title 我家云最新的Armbian_23.08.0_rockchip_l1pro_bookworm_6.1.50_server_2023.09.02.img还是不能引导启动 我家云可以引导启动了 Sep 9, 2023
@ophub ophub added documentation Improvements or additions to documentation support This need is supported new box Research Fills in the Blanks labels Sep 9, 2023
@aaa7260
Copy link

aaa7260 commented Sep 9, 2023

截屏2023-09-09 下午12 55 39

@ophub
Copy link
Owner

ophub commented Sep 9, 2023

https://www.right.com.cn/forum/thread-1301727-1-1.html

我网上搜下了,上面固件使用的wind可能是这个帖子的作者(如果错了请随时更正)。我把他也添加到贡献者名单里了,感谢这些大佬们的分享。

记得反馈下修改dtb名字后的测试结果。

@s2031215
Copy link

感謝大佬,吃灰了很久的我家云終於可以用了
原本rk3328-chainedbox.dtb風扇是不會轉和燈是保持紅色
修改rk3328-l1pro-1296mhz.dtb之後風扇會自己轉和燈會轉紫色
image

@ophub
Copy link
Owner

ophub commented Sep 11, 2023

好的,多谢反馈,我改一下dtb

@liubin7913
Copy link
Author

刷最新Armbian_23.08.0_rockchip_chainedbox_bullseye_6.1.52_server_2023.09.12.img,前面板电源按钮能关机,不能开机,需要拔电源重插

@ophub ophub closed this as completed Sep 18, 2023
@ophub
Copy link
Owner

ophub commented Oct 28, 2023

Snip20231028_2
20231028163141
Snip20231028_1

@laoskido
Copy link

Thanks to the boss, my cloud that has been in the dust for a long time can finally be used. Originally, the fan of rk3328-chainedbox.dtb would not turn and the light would remain red. After modifying rk3328-l1pro-1296mhz.dtb, the fan will turn on its own and the light will turn purple. image

What is the Write speed of your device ? mine, when start copying from PC to NAS, from 56MB/s and then it fluctuates down to 36-4X MB/s . Both LAN and Router are 1G ethernet speed.

I bought the USB to Sata cable ( JSM578) , plugged into the back Usb 3.0 port, speed still the same. around 40-50MB/s

I have 2 L1 to test. One of them messed up preety bad when i tried to mod the usb sata.
The other L1 is still in its original shape.

@laoskido
Copy link

Okay, thanks for the feedback, I will change the dtb

Thanks for the great work , boss.

I have a question, when i use the rk3328_v1.14.249.bin , the L1 wont boot.

If i use the old rk3328_loader.bin , it boots and works fine with your imgage.

Rockchip tooltox i use the newest version, same as yours.

@ophub
Copy link
Owner

ophub commented Nov 13, 2023

Use what you can launch

@elo3333
Copy link

elo3333 commented Dec 12, 2023

chainbox Jammy PGIO control

It is an excellent piece of work. Just a minor query. I cannot use PGIO79 and PWM to control the fan speed. Any method to fix the device or resource busy issue with the command: echo 79 > /sys/class/gpio/export?

Or is there any means to control the speed of the fan?

@mygule
Copy link

mygule commented Jun 10, 2024

大佬您有相关学习群吗

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
documentation Improvements or additions to documentation new box Research Fills in the Blanks support This need is supported
Projects
None yet
Development

No branches or pull requests

7 participants