M411A S905L3 安装 armbian 的尝试 #1817

foobarjimmy · 2023-10-31T07:46:42Z

Device Information | 设备信息

SOC: [S905L3]
Model [M411A]

Armbian Version | 系统版本

Kernel Version: [6.1.57]
Release: [jammy]

DTB
meson-gxl-s905l3b-m302a.dtb

Hardware
2GiB ram
16GiB emmc

Describe the bug | 问题描述
目前我安装的步骤是

刷入安卓9 来源是固件密码 nnw3 里的 “A《当贝桌面纯净完美版--固件大全》（固件种类更多）”-“1《魔百盒(CM／M)固件合集》”-“M411A”-"530-福建移动M411A（CW创维代工）S905L3B_UWE5621DS_安卓9.0-线刷固件包【乐天固件】（亲测）"
选择 release 里的 Armbian_23.11.0_amlogic_s905l3-cm211_jammy_6.1.57_server_2023.10.13.img.gz 写入U盘
连接TTL: 输入 reboot update
可以从U盘启动网口正常获取ip
选择序号 121: CM211-1 可以写入EMMC

Notes:

release里只有 s905l3-cm211_jammy_6.1.57 可以正常获取ip
s905l3 以meson-gxl-s905l2-x7-5g.dtb为dtb的均无法启动
s905l3-cm211 内核版本K5.15.x 以及 K6.1.59均无法获取ip，只有K6.1.57可以

型号图片:

foobarjimmy · 2023-10-31T08:00:19Z

以 Armbian_23.11.0_amlogic_s905l3-cm211_jammy_6.1.57_server_2023.10.13.img.gz (meson-gxl-s905l3b-m302a.dtb) 启动选择序号 121: CM211-1 可以写入EMMC

foobarjimmy · 2023-10-31T08:02:18Z

cat /etc/ophub-release

PLATFORM='amlogic'
VERSION_CODEID='ubuntu'
VERSION_CODENAME='jammy'
MODEL_ID='121'
MODEL_NAME='CM211-1'
SOC='s905l3'
FDTFILE='meson-gxl-s905l3b-m302a.dtb'
FAMILY='meson-gxl'
BOARD='s905l3-cm211'
KERNEL_REPO='ophub/kernel'
KERNEL_TAGS='stable'
KERNEL_VERSION='6.1.57'
KERNEL_BACKUP='yes'
GITHUB_CDN=''
BOOT_CONF='uEnv.conf'
ROOTFS_TYPE='btrfs'
DISK_TYPE='emmc'
AMPART_STATUS='yes'
MLUBOOT_STATUS='no'
MAINLINE_UBOOT='/usr/lib/u-boot/'
BOOTLOADER_IMG='/usr/lib/u-boot/'
UBOOT_OVERLOAD='u-boot-p212.bin'
BUILD_REPOSITORY='github.com/armbian/build'
REBUILD_REPOSITORY='github.com/ophub/amlogic-s9xxx-armbian'
CONTRIBUTORS='Ivanriver'
BUILDER_NAME='ophub'
PACKAGED_DATE='2023-10-13'

foobarjimmy · 2023-10-31T08:06:49Z

因为可以正常启动以及写入EMMC, 只是记录一下可能有用
ophub大佬如果需要我做其他测试我也可以做

ophub · 2023-10-31T08:46:31Z

感谢你分享测试结果，这已经描述的很清楚了。我把这个设备加入支持列表里。

foobarjimmy · 2023-10-31T08:49:08Z

Done

谢谢

ophub · 2023-10-31T09:24:53Z

设备已经添加了，你分享的安卓系统我转载到了这里：
https://github.com/ophub/kernel/releases/tag/tools

qiuliunian · 2024-01-08T12:36:36Z

大佬请教一下 release里Armbian_23.11.0_amlogic_s905l3-cm211_jammy_6.1.57_server_2023.10.13.img.gz没有找到到哪里下载呢谢谢

foobarjimmy · 2024-01-17T02:06:02Z

大佬请教一下 release里Armbian_23.11.0_amlogic_s905l3-cm211_jammy_6.1.57_server_2023.10.13.img.gz没有找到到哪里下载呢谢谢

搜索release里面包含 “s905l3-cm211” 的链接现在已经是armbian 24.x了

qiuliunian · 2024-01-21T01:17:58Z

大佬请教一下release里Armbian_23.11.0_amlogic_s905l3-cm211_jammy_6.1.57_server_2023.10.13.img.gz没有找到到哪里下载呢谢谢

搜索release里面包含“s905l3-cm211”的链接现在已经是armbian 24.x了

大佬请教一下我安装了24.x版本的arm 但是断开电源后就连不上网络了路由器的网口灯不亮

foobarjimmy · 2024-01-21T04:50:50Z

大佬请教一下release里Armbian_23.11.0_amlogic_s905l3-cm211_jammy_6.1.57_server_2023.10.13.img.gz没有找到到哪里下载呢谢谢

搜索release里面包含“s905l3-cm211”的链接现在已经是armbian 24.x了

大佬请教一下我安装了24.x版本的arm 但是断开电源后就连不上网络了路由器的网口灯不亮

那你要链接 hdmi看一下终端
ip addr
的输出是什么，把你能获取的信息都提供一下，记得用code格式。

qiuliunian · 2024-01-21T09:05:26Z

大佬 HDMI输出黑屏
putty登录输入ip addr 显示这个

root@armbian:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
3: ip6tnl0@NONE: mtu 1452 qdisc noop state DOWN group default qlen 1000
link/tunnel6 :: brd :: permaddr 646:b1d6:c684::
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group defa ult qlen 1000
link/ether 16:11:f2:62:bd:ab brd ff:ff:ff:ff:ff:ff
altname end0
inet 192.168.0.104/24 brd 192.168.0.255 scope global dynamic noprefixroute e th0
valid_lft 6840sec preferred_lft 6840sec
inet6 fdc3:2bd0:740e:4:dc8f:6fdb:b869:a20f/64 scope global temporary dynamic
valid_lft 86073sec preferred_lft 14073sec
inet6 fdc3:2bd0:740e:4:78c4:545f:57c3:da18/64 scope global dynamic mngtmpadd r noprefixroute
valid_lft 86073sec preferred_lft 14073sec
inet6 fe80::a8cc:ff8d:8b8b:3bcf/64 scope link noprefixrout

qiuliunian · 2024-01-21T09:05:53Z

大佬 HDMI输出黑屏 putty登录输入ip addr 显示这个

root@armbian:~# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 3: ip6tnl0@NONE: mtu 1452 qdisc noop state DOWN group default qlen 1000 link/tunnel6 :: brd :: permaddr 646:b1d6:c684:: 4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group defa ult qlen 1000 link/ether 16:11:f2:62:bd:ab brd ff:ff:ff:ff:ff:ff altname end0 inet 192.168.0.104/24 brd 192.168.0.255 scope global dynamic noprefixroute e th0 valid_lft 6840sec preferred_lft 6840sec inet6 fdc3:2bd0:740e:4:dc8f:6fdb:b869:a20f/64 scope global temporary dynamic valid_lft 86073sec preferred_lft 14073sec inet6 fdc3:2bd0:740e:4:78c4:545f:57c3:da18/64 scope global dynamic mngtmpadd r noprefixroute valid_lft 86073sec preferred_lft 14073sec inet6 fe80::a8cc:ff8d:8b8b:3bcf/64 scope link noprefixrout

大佬 HDMI输出黑屏
putty登录输入ip addr 显示这个

root@armbian:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
3: ip6tnl0@NONE: mtu 1452 qdisc noop state DOWN group default qlen 1000
link/tunnel6 :: brd :: permaddr 646:b1d6:c684::
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group defa ult qlen 1000
link/ether 16:11:f2:62:bd:ab brd ff:ff:ff:ff:ff:ff
altname end0
inet 192.168.0.104/24 brd 192.168.0.255 scope global dynamic noprefixroute e th0
valid_lft 6840sec preferred_lft 6840sec
inet6 fdc3:2bd0:740e:4:dc8f:6fdb:b869:a20f/64 scope global temporary dynamic
valid_lft 86073sec preferred_lft 14073sec
inet6 fdc3:2bd0:740e:4:78c4:545f:57c3:da18/64 scope global dynamic mngtmpadd r noprefixroute
valid_lft 86073sec preferred_lft 14073sec
inet6 fe80::a8cc:ff8d:8b8b:3bcf/64 scope link noprefixrout

qiuliunian · 2024-01-21T09:23:05Z

大佬请教一下release里Armbian_23.11.0_amlogic_s905l3-cm211_jammy_6.1.57_server_2023.10.13.img.gz没有找到到哪里下载呢谢谢

搜索release里面包含“s905l3-cm211”的链接现在已经是armbian 24.x了

大佬请教一下我安装了24.x版本的arm但是断电后就连不上网络了路由器的网口灯不亮

那你要链接hdmi看一下终端 ip addr 的输出是什么，让你能获取的信息都提供一下，记住用代码格式。

大佬我发现了我安装好arm再安装docker 然后安装网心云重启就连不上网络了

qiuliunian · 2024-01-21T09:23:49Z

大佬 HDMI输出黑屏 putty登录输入ip addr 显示这个

root@armbian:~# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 3: ip6tnl0@NONE: mtu 1452 qdisc noop state DOWN group default qlen 1000 link/tunnel6 :: brd :: permaddr 646:b1d6:c684:: 4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group defa ult qlen 1000 link/ether 16:11:f2:62:bd:ab brd ff:ff:ff:ff:ff:ff altname end0 inet 192.168.0.104/24 brd 192.168.0.255 scope global dynamic noprefixroute e th0 valid_lft 6840sec preferred_lft 6840sec inet6 fdc3:2bd0:740e:4:dc8f:6fdb:b869:a20f/64 scope global temporary dynamic valid_lft 86073sec preferred_lft 14073sec inet6 fdc3:2bd0:740e:4:78c4:545f:57c3:da18/64 scope global dynamic mngtmpadd r noprefixroute valid_lft 86073sec preferred_lft 14073sec inet6 fe80::a8cc:ff8d:8b8b:3bcf/64 scope link noprefixrout

大佬请教一下release里Armbian_23.11.0_amlogic_s905l3-cm211_jammy_6.1.57_server_2023.10.13.img.gz没有找到到哪里下载呢谢谢

搜索release里面包含“s905l3-cm211”的链接现在已经是armbian 24.x了

大佬请教一下我安装了24.x版本的arm但是断电后就连不上网络了路由器的网口灯不亮

那你要链接hdmi看一下终端 ip addr 的输出是什么，让你能获取的信息都提供一下，记住用代码格式。

大佬 HDMI输出黑屏
putty登录输入ip addr 显示这个

root@armbian:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
3: ip6tnl0@NONE: mtu 1452 qdisc noop state DOWN group default qlen 1000
link/tunnel6 :: brd :: permaddr 646:b1d6:c684::
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group defa ult qlen 1000
link/ether 16:11:f2:62:bd:ab brd ff:ff:ff:ff:ff:ff
altname end0
inet 192.168.0.104/24 brd 192.168.0.255 scope global dynamic noprefixroute e th0
valid_lft 6840sec preferred_lft 6840sec
inet6 fdc3:2bd0:740e:4:dc8f:6fdb:b869:a20f/64 scope global temporary dynamic
valid_lft 86073sec preferred_lft 14073sec
inet6 fdc3:2bd0:740e:4:78c4:545f:57c3:da18/64 scope global dynamic mngtmpadd r noprefixroute
valid_lft 86073sec preferred_lft 14073sec
inet6 fe80::a8cc:ff8d:8b8b:3bcf/64 scope link noprefixrout

foobarjimmy · 2024-01-21T09:45:30Z

大佬请教一下release里Armbian_23.11.0_amlogic_s905l3-cm211_jammy_6.1.57_server_2023.10.13.img.gz没有找到到哪里下载呢谢谢

搜索release里面包含“s905l3-cm211”的链接现在已经是armbian 24.x了

大佬请教一下我安装了24.x版本的arm但是断电后就连不上网络了路由器的网口灯不亮

那你要链接hdmi看一下终端 ip addr 的输出是什么，让你能获取的信息都提供一下，记住用代码格式。

大佬我发现了我安装好arm再安装docker 然后安装网心云重启就连不上网络了

你发的
root@armbian:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever
2: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0
3: ip6tnl0@NONE: mtu 1452 qdisc noop state DOWN group default qlen 1000 link/tunnel6 :: brd :: permaddr 646:b1d6:c684::
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group defa ult qlen 1000 link/ether 16:11:f2:62:bd:ab brd ff:ff:ff:ff:ff:ff altname end0 inet 192.168.0.104/24 brd 192.168.0.255 scope global dynamic noprefixroute e th0 valid_lft 6840sec preferred_lft 6840sec inet6 fdc3:2bd0:740e:4:dc8f:6fdb:b869:a20f/64 scope global temporary dynamic valid_lft 86073sec preferred_lft 14073sec inet6 fdc3:2bd0:740e:4:78c4:545f:57c3:da18/64 scope global dynamic mngtmpadd r noprefixroute valid_lft 86073sec preferred_lft 14073sec inet6 fe80::a8cc:ff8d:8b8b:3bcf/64 scope link noprefixrout

eth0不是有地址吗？是你看完这个以后安装docker然后网心云才用同一个ip连不上的吗？

qiuliunian · 2024-01-21T10:32:50Z

是的我先看IP在装docker网心云的

foobarjimmy · 2024-01-21T10:36:35Z

是的我先看IP在装docker网心云的

那想知道为什么必须接TTL看了

foobarjimmy · 2024-01-21T10:48:05Z

是的我先看IP在装docker网心云的

你用putty看的时候连接host 名字是什么？是ip吗？

qiuliunian · 2024-01-21T10:53:48Z

是IP
ttl 连接后怎么看呢

foobarjimmy · 2024-01-21T10:57:14Z

是IP ttl 连接后怎么看呢

或者你换一个内核的armbian试试看 ”s905l3-cm211“应该有好几个可以下载的镜像

qiuliunian · 2024-01-21T12:51:30Z

是IP ttl连接后怎么看呢

或者你换个armbian的内核试试看“s905l3-cm211”应该有好几个可以下载的

大佬这是我装完docker网心云之后的ip addr

root@armbian:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
3: ip6tnl0@NONE: mtu 1452 qdisc noop state DOWN group default qlen 1000
link/tunnel6 :: brd :: permaddr 3a61:bed8:9236::
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group defa ult qlen 1000
link/ether 16:11:f2:62:bd:ab brd ff:ff:ff:ff:ff:ff
altname end0
inet 192.168.0.104/24 brd 192.168.0.255 scope global dynamic noprefixroute e th0
valid_lft 6713sec preferred_lft 6713sec
inet6 fdc3:2bd0:740e:4:b9:ae4:c36d:2a8d/64 scope global temporary dynamic
valid_lft 86152sec preferred_lft 14152sec
inet6 fdc3:2bd0:740e:4:d8b2:57d0:1b1c:2c36/64 scope global dynamic mngtmpadd r noprefixroute
valid_lft 86152sec preferred_lft 14152sec
inet6 fe80::cb8d:6769:8149:895c/64 scope link noprefixroute
valid_lft forever preferred_lft forever
5: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOW N group default
link/ether 02:42:56:ab:32:bd brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever

you2366 · 2024-02-05T17:00:08Z

请问只要插着USB磁盘就启动不了系统是什么问题？M411A CPU：S05L3 刷Armbian_24.2.0_amlogic_s905l3-cm211_jammy_6.6.15_server_2024.02.01.img
card out
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
(Re)start USB...
USB0: USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... init_part() 278: PART_TYPE_DOS
1 Storage Device(s) found
reading s905_autoscript
** Unable to read file s905_autoscript **
** Bad device usb 1 **
** Bad device usb 2 **
** Bad device usb 3 **
reading emmc_autoscript
831 bytes read in 3 ms (270.5 KiB/s)

Executing script at 01020000

reading u-boot.emmc
606670 bytes read in 20 ms (28.9 MiB/s)

Starting application at 0x01000000 ...

U-Boot 2021.04-00056-g13ac02db31-dirty (Apr 28 2021 - 22:52:02 +0800) p212

Model: Amlogic Meson GXL (S905X) P212 Development Board
SoC: Amlogic Meson Unknown (Unknown) Revision 2a:e (c5:2)
DRAM: 2 GiB
MMC: mmc@70000: 0, mmc@72000: 1, mmc@74000: 2
Loading Environment from nowhere... OK
In: serial
Out: serial
Err: serial
[BL31]: tee size: 0
[BL31]: tee size: 0
Net: eth0: ethernet@c9410000
Hit any key to stop autoboot: 0
starting USB...
Bus usb@c9000000: dwc3_meson_gxl_get_phys: usb2 ports: 2
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus usb@c9000000 for devices... 2 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found

Device 0: Vendor: TOSHIBA Rev: 1.00 Prod: TransMemory
Type: Removable Hard Disk
Capacity: 29587.1 MB = 28.8 GB (60594432 x 512)
... is now current device
Scanning usb 0:1...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Card did not respond to voltage select! : -110
Scanning disk mmc@70000.blk...
Disk mmc@70000.blk not ready
Card did not respond to voltage select! : -110
Scanning disk mmc@72000.blk...
Disk mmc@72000.blk not ready
Scanning disk mmc@74000.blk...
Scanning disk usb_mass_storage.lun0...
Found 5 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
switch to partitions #0, OK
mmc2(part 0) is current device
Scanning mmc 2:1...
Found U-Boot script /boot.scr
1025 bytes read in 1 ms (1001 KiB/s)

Executing script at 08000000

Start AMLOGIC mainline U-boot

Error: "bootfromsd" not defined

373 bytes read in 5 ms (72.3 KiB/s)

Error: "mac" not defined

Error: "eth_mac" not defined

ethaddr=4e:a6:c7:91:df:2c
34998784 bytes read in 801 ms (41.7 MiB/s)
16774159 bytes read in 387 ms (41.3 MiB/s)
28801 bytes read in 2 ms (13.7 MiB/s)
Moving Image from 0x8080000 to 0x8200000, end=a450000

Loading init Ramdisk from Legacy Image at 13000000 ...

Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
Data Size: 16774095 Bytes = 16 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK

Flattened Device Tree blob at 08008000

Booting using the fdt blob at 0x8008000
Loading Ramdisk to 7cf4b000, end 7df4a3cf ... OK
Loading Device Tree to 000000007cf40000, end 000000007cf4a080 ... OK
"Synchronous Abort" handler, esr 0x96000004
elr: 00000000010527d4 lr : 000000000104331c (reloc)
elr: 000000007ffac7d4 lr : 000000007ff9d31c
x0 : 0dc617696e6f6aaf x1 : 000000007ffb42d8
x2 : 0000000000000010 x3 : 000000007df5f570
x4 : 0000000000000000 x5 : 0dc617696e6f6aaf
x6 : 0000000001000000 x7 : 0000000000000000
x8 : 0000000000000007 x9 : 0000000000000000
x10: 0000000000000180 x11: 000000007df4c2ec
x12: 00000000000000ac x13: 000000007df4c2a8
x14: 000000007cf40000 x15: 0000000000000020
x16: 000000007ff5e998 x17: 0000000000000000
x18: 000000007df57de0 x19: 000000007cf4d040
x20: 000000007ff5abc8 x21: 000000007ffb42d8
x22: 0000000000001000 x23: 000000007df5f4c0
x24: 000000007ffce950 x25: 0000000001000000
x26: 0000000000000000 x27: 0000000001000000
x28: 0000000000001000 x29: 000000007df4c2a0

Code: eb02009f 54000061 52800000 14000006 (386468a3)
Resetting CPU ...

resetting ...
INFO: PSCI Affinity Map:
INFO: AffInst: Level 0, MPID 0x0, State ON
INFO: AffInst: Level 0, MPID 0x1, State OFF
INFO: AffInst: Level 0, MPID 0x2, State OFF
INFO: AffInst: Level 0, MPID 0x3, State OFF
bl31 reboot reason: 0x1
bl31 reboot reason: 0x0
ERROR: gxbb System Reset: SCP error 16.
GXLX2:BL1:3cfee7:42a5ae;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 40924

BL2 Built : 13:36:55, Jun 22 2020.
gxl g85d6ad1 - longyong.chen@droid02-sz

Board ID = 6, adc=462
set vcck to 1070 mv
set vddee to 1070 mv
CARD_3 high, old board
CPU clk: 1200MHz

DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz - FAIL
DDR3 chl: Rank0 16bit @ 792MHz - FAIL
DDR4 chl: Rank0+1 @ 864MHz - FAIL
DDR4 chl: Rank0 @ 864MHz
bist_test rank: 0 26 03 49 38 20 51 20 00 41 39 20 52 1f 00 3f 3d 24 56 1e 00 3d 39 20 53 615 - PASS

Rank0: 2048MB(auto)-2T-18
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x00007600
Load bl301 from eMMC, src: 0x00018200, des: 0x01380000, size: 0x00002400
Load bl31 from eMMC, src: 0x0001c200, des: 0x10100000, size: 0x00019600
Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x0007b000
NOTICE: BL3-1: v1.0(debug):361f8a7
NOTICE: BL3-1: Built : 16:43:26, Dec 19 2018
NOTICE: BL31: GXL normal boot!
NOTICE: BL31: BL33 decompress pass
[Image: gxl_v1.1.3103-9234004 2018-12-27 10:43:23 yao.zhang@droid07]
efuse init ops = c5
efuse init hdcp = c, cf9=7
x2_hp_e = 0
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: 0 0 3 c c 0 91 b3 50 a0 0 c5 not ES chip
[0.934663 Inits done]
INFO: BL3-1: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader
ERROR: Error initializing runtime service opteed_fast
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x1000000
INFO: BL3-1: Next image spsr = 0x3c9

U-Boot 2015.01 (Mar 29 2021 - 17:09:00)

DRAM: 2 GiB
Relocation Offset is: 76e8c000
this uboot is for hw_1_8, set GPIODV_24gpio: pin GPIODV_24 (gpio 43) value is 1
gpio: pin GPIOZ_14 (gpio 73) value is 1
register usb cfg[0][1] = 0000000077f5bc10
[CANVAS]canvas init
vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
vpu: clk_level = 7
vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
vpp: vpp_init
boot_device_flag : 1
Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
init bus_cycle=6, bus_timing=7, system=5.0ns
reset failed
get_chip_type and ret:fffffffe
get_chip_type and ret:fffffffe
chip detect failed and ret:fffffffe
nandphy_init failed and ret=0xfffffff1
MMC: aml_priv->desc_buf = 0x0000000073e7cc00
aml_priv->desc_buf = 0x0000000073e7ef20
SDIO Port B: 0, SDIO Port C: 1
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
init_part() 278: PART_TYPE_DOS
[mmc_init] mmc init success
dtb magic 00088b1f
Amlogic multi-dtb tool
GZIP format, decompress...
Multi dtb detected
unified board, board id = 6
Multi dtb tool version: v2 .
Support 10 dtbs.
aml_dt soc: gxlx2 platform: p291 variant: 2g
dtb 0 soc: gxl plat: p211 vari: 1g
dtb 1 soc: gxl plat: p211 vari: 2g
dtb 2 soc: gxlx plat: p261 vari: 1g
dtb 3 soc: gxlx plat: p261 vari: 2g
dtb 4 soc: gxlx plat: p265 vari: 1g
dtb 5 soc: gxlx plat: p265 vari: 2g
dtb 6 soc: gxlx2 plat: p291 vari: 1g
dtb 7 soc: gxlx2 plat: p291 vari: 2g
dtb 8 soc: gxlx2 plat: p295 vari: 1g
dtb 9 soc: gxlx2 plat: p295 vari: 2g
Find match dtb: 7
start dts,buffer=0000000073e81750,dt_addr=0000000073e81750
Amlogic multi-dtb tool
Single dtb detected
parts: 1
00: data ffffffffffffffff 4
init_part() 278: PART_TYPE_DOS
eMMC/TSD partition table have been checked OK!
check pattern success
mmc env offset: 0x7400000
In: serial
Out: serial
Err: serial
board id is : 6
hpd_state=0
cvbs performance type = 7, table = 1
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-924: calc d0c0fbf8, store d0c0fbf8
_verify_dtb_checksum()-924: calc d0c0fbf8, store d0c0fbf8
dtb_read()-1046: total valid 2
dtb_read()-1113: do nothing
Amlogic multi-dtb tool
GZIP format, decompress...
Multi dtb detected
unified board, board id = 6
Multi dtb tool version: v2 .
Support 10 dtbs.
aml_dt soc: gxlx2 platform: p291 variant: 2g
dtb 0 soc: gxl plat: p211 vari: 1g
dtb 1 soc: gxl plat: p211 vari: 2g
dtb 2 soc: gxlx plat: p261 vari: 1g
dtb 3 soc: gxlx plat: p261 vari: 2g
dtb 4 soc: gxlx plat: p265 vari: 1g
dtb 5 soc: gxlx plat: p265 vari: 2g
dtb 6 soc: gxlx2 plat: p291 vari: 1g
dtb 7 soc: gxlx2 plat: p291 vari: 2g
dtb 8 soc: gxlx2 plat: p295 vari: 1g
dtb 9 soc: gxlx2 plat: p295 vari: 2g
Find match dtb: 7
wipe_data=successfulSecd
wipe_cache=successful
_find_partition_by_name()-188: do not find match in table logo
Cannot find dev.
amlmmc cmd failed

store - STORE sub-system

Usage:
store store init flag
store read name addr off|partition size
read 'size' bytes starting at offset 'off'
to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
write 'size' bytes starting at offset 'off'
to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
write uboot to the boot device
store erase boot/data:
erase the area which is uboot or data
store erase partition <partition_name>:
erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
scrub the area from offset and size
store dtb iread/read/write addr
read/write dtb, size is optional
store key read/write addr
read/write key, size is optional
store mbr addr
update mbr/partition table by dtb

cmd store failed
Err imgread(L333):Fail to read 0x2000B from part[logo] at offset 0
There is no valid bmp file at the given address
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3dc00000
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3dc00000
[CANVAS]addr=0x3dc00000 width=3840, height=1440
There is no valid bmp file at the given address
upgrade_step=2
amlkey_init() enter!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
[KM]Error:f[key_manage_query_size]L507:key[ch_code] not programed yet
rebootmode=cold_boot
Enter USB burn
Try connect time out 701, 700, 762
key1 = 7d82dd22
key2 = 7e81dd22
key3 = 728ddd22
time_out = 7a120
ir init
irkey - irkey key_value1 key_value2 key_value3 time_value

Usage:
irkey
Hit any key to stop autoboot: 0

foobarjimmy · 2024-02-06T04:06:11Z

请问只要插着USB磁盘就启动不了系统是什么问题？ card out emmc/sd response timeout, cmd8, status=0x1ff2800 emmc/sd response timeout, cmd55, status=0x1ff2800 emmc/sd response timeout, cmd1, status=0x1ff2800 (Re)start USB... USB0: USB3.0 XHCI init start Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... init_part() 278: PART_TYPE_DOS 1 Storage Device(s) found reading s905_autoscript ** Unable to read file s905_autoscript ** ** Bad device usb 1 ** ** Bad device usb 2 ** ** Bad device usb 3 ** reading emmc_autoscript 831 bytes read in 3 ms (270.5 KiB/s)

Executing script at 01020000

reading u-boot.emmc 606670 bytes read in 20 ms (28.9 MiB/s)

Starting application at 0x01000000 ...

U-Boot 2021.04-00056-g13ac02db31-dirty (Apr 28 2021 - 22:52:02 +0800) p212

Model: Amlogic Meson GXL (S905X) P212 Development Board SoC: Amlogic Meson Unknown (Unknown) Revision 2a:e (c5:2) DRAM: 2 GiB MMC: mmc@70000: 0, mmc@72000: 1, mmc@74000: 2 Loading Environment from nowhere... OK In: serial Out: serial Err: serial [BL31]: tee size: 0 [BL31]: tee size: 0 Net: eth0: ethernet@c9410000 Hit any key to stop autoboot: 0 starting USB... Bus usb@c9000000: dwc3_meson_gxl_get_phys: usb2 ports: 2 Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 scanning bus usb@c9000000 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found

Device 0: Vendor: TOSHIBA Rev: 1.00 Prod: TransMemory Type: Removable Hard Disk Capacity: 29587.1 MB = 28.8 GB (60594432 x 512) ... is now current device Scanning usb 0:1... libfdt fdt_check_header(): FDT_ERR_BADMAGIC Card did not respond to voltage select! : -110 Scanning disk mmc@70000.blk... Disk mmc@70000.blk not ready Card did not respond to voltage select! : -110 Scanning disk mmc@72000.blk... Disk mmc@72000.blk not ready Scanning disk mmc@74000.blk... Scanning disk usb_mass_storage.lun0... Found 5 disks No EFI system partition BootOrder not defined EFI boot manager: Cannot load any image Card did not respond to voltage select! : -110 Card did not respond to voltage select! : -110 switch to partitions #0, OK mmc2(part 0) is current device Scanning mmc 2:1... Found U-Boot script /boot.scr 1025 bytes read in 1 ms (1001 KiB/s)

Executing script at 08000000

Start AMLOGIC mainline U-boot

Error: "bootfromsd" not defined

373 bytes read in 5 ms (72.3 KiB/s)

Error: "mac" not defined

Error: "eth_mac" not defined

ethaddr=4e:a6:c7:91:df:2c 34998784 bytes read in 801 ms (41.7 MiB/s) 16774159 bytes read in 387 ms (41.3 MiB/s) 28801 bytes read in 2 ms (13.7 MiB/s) Moving Image from 0x8080000 to 0x8200000, end=a450000

Loading init Ramdisk from Legacy Image at 13000000 ...

Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 16774095 Bytes = 16 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK

Flattened Device Tree blob at 08008000

Booting using the fdt blob at 0x8008000 Loading Ramdisk to 7cf4b000, end 7df4a3cf ... OK Loading Device Tree to 000000007cf40000, end 000000007cf4a080 ... OK "Synchronous Abort" handler, esr 0x96000004 elr: 00000000010527d4 lr : 000000000104331c (reloc) elr: 000000007ffac7d4 lr : 000000007ff9d31c x0 : 0dc617696e6f6aaf x1 : 000000007ffb42d8 x2 : 0000000000000010 x3 : 000000007df5f570 x4 : 0000000000000000 x5 : 0dc617696e6f6aaf x6 : 0000000001000000 x7 : 0000000000000000 x8 : 0000000000000007 x9 : 0000000000000000 x10: 0000000000000180 x11: 000000007df4c2ec x12: 00000000000000ac x13: 000000007df4c2a8 x14: 000000007cf40000 x15: 0000000000000020 x16: 000000007ff5e998 x17: 0000000000000000 x18: 000000007df57de0 x19: 000000007cf4d040 x20: 000000007ff5abc8 x21: 000000007ffb42d8 x22: 0000000000001000 x23: 000000007df5f4c0 x24: 000000007ffce950 x25: 0000000001000000 x26: 0000000000000000 x27: 0000000001000000 x28: 0000000000001000 x29: 000000007df4c2a0

Code: eb02009f 54000061 52800000 14000006 (386468a3) Resetting CPU ...

resetting ... INFO: PSCI Affinity Map: INFO: AffInst: Level 0, MPID 0x0, State ON INFO: AffInst: Level 0, MPID 0x1, State OFF INFO: AffInst: Level 0, MPID 0x2, State OFF INFO: AffInst: Level 0, MPID 0x3, State OFF bl31 reboot reason: 0x1 bl31 reboot reason: 0x0 ERROR: gxbb System Reset: SCP error 16. GXLX2:BL1:3cfee7:42a5ae;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0; TE: 40924

BL2 Built : 13:36:55, Jun 22 2020. gxl g85d6ad1 - longyong.chen@droid02-sz

Board ID = 6, adc=462 set vcck to 1070 mv set vddee to 1070 mv CARD_3 high, old board CPU clk: 1200MHz

DDR3 chl: Rank0+1 @ 792MHz - FAIL DDR3 chl: Rank0 @ 792MHz - FAIL DDR3 chl: Rank0 16bit @ 792MHz - FAIL DDR4 chl: Rank0+1 @ 864MHz - FAIL DDR4 chl: Rank0 @ 864MHz bist_test rank: 0 26 03 49 38 20 51 20 00 41 39 20 52 1f 00 3f 3d 24 56 1e 00 3d 39 20 53 615 - PASS

Rank0: 2048MB(auto)-2T-18 AddrBus test pass! -s Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000 New fip structure! Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x00007600 Load bl301 from eMMC, src: 0x00018200, des: 0x01380000, size: 0x00002400 Load bl31 from eMMC, src: 0x0001c200, des: 0x10100000, size: 0x00019600 Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x0007b000 NOTICE: BL3-1: v1.0(debug):361f8a7 NOTICE: BL3-1: Built : 16:43:26, Dec 19 2018 NOTICE: BL31: GXL normal boot! NOTICE: BL31: BL33 decompress pass [Image: gxl_v1.1.3103-9234004 2018-12-27 10:43:23 yao.zhang@droid07] efuse init ops = c5 efuse init hdcp = c, cf9=7 x2_hp_e = 0 bl30: check_permit, count is 1 bl30: check_permit: ok! chipid: 0 0 3 c c 0 91 b3 50 a0 0 c5 not ES chip [0.934663 Inits done] INFO: BL3-1: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader ERROR: Error initializing runtime service opteed_fast INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address = 0x1000000 INFO: BL3-1: Next image spsr = 0x3c9

U-Boot 2015.01 (Mar 29 2021 - 17:09:00)

DRAM: 2 GiB Relocation Offset is: 76e8c000 this uboot is for hw_1_8, set GPIODV_24gpio: pin GPIODV_24 (gpio 43) value is 1 gpio: pin GPIOZ_14 (gpio 73) value is 1 register usb cfg[0][1] = 0000000077f5bc10 [CANVAS]canvas init vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters vpu: clk_level = 7 vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300) vpp: vpp_init boot_device_flag : 1 Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc. init bus_cycle=6, bus_timing=7, system=5.0ns reset failed get_chip_type and ret:fffffffe get_chip_type and ret:fffffffe chip detect failed and ret:fffffffe nandphy_init failed and ret=0xfffffff1 MMC: aml_priv->desc_buf = 0x0000000073e7cc00 aml_priv->desc_buf = 0x0000000073e7ef20 SDIO Port B: 0, SDIO Port C: 1 emmc/sd response timeout, cmd8, status=0x1ff2800 emmc/sd response timeout, cmd55, status=0x1ff2800 init_part() 278: PART_TYPE_DOS [mmc_init] mmc init success dtb magic 00088b1f Amlogic multi-dtb tool GZIP format, decompress... Multi dtb detected unified board, board id = 6 Multi dtb tool version: v2 . Support 10 dtbs. aml_dt soc: gxlx2 platform: p291 variant: 2g dtb 0 soc: gxl plat: p211 vari: 1g dtb 1 soc: gxl plat: p211 vari: 2g dtb 2 soc: gxlx plat: p261 vari: 1g dtb 3 soc: gxlx plat: p261 vari: 2g dtb 4 soc: gxlx plat: p265 vari: 1g dtb 5 soc: gxlx plat: p265 vari: 2g dtb 6 soc: gxlx2 plat: p291 vari: 1g dtb 7 soc: gxlx2 plat: p291 vari: 2g dtb 8 soc: gxlx2 plat: p295 vari: 1g dtb 9 soc: gxlx2 plat: p295 vari: 2g Find match dtb: 7 start dts,buffer=0000000073e81750,dt_addr=0000000073e81750 Amlogic multi-dtb tool Single dtb detected parts: 1 00: data ffffffffffffffff 4 init_part() 278: PART_TYPE_DOS eMMC/TSD partition table have been checked OK! check pattern success mmc env offset: 0x7400000 In: serial Out: serial Err: serial board id is : 6 hpd_state=0 cvbs performance type = 7, table = 1 [store]To run cmd[emmc dtb_read 0x1000000 0x40000] _verify_dtb_checksum()-924: calc d0c0fbf8, store d0c0fbf8 _verify_dtb_checksum()-924: calc d0c0fbf8, store d0c0fbf8 dtb_read()-1046: total valid 2 dtb_read()-1113: do nothing Amlogic multi-dtb tool GZIP format, decompress... Multi dtb detected unified board, board id = 6 Multi dtb tool version: v2 . Support 10 dtbs. aml_dt soc: gxlx2 platform: p291 variant: 2g dtb 0 soc: gxl plat: p211 vari: 1g dtb 1 soc: gxl plat: p211 vari: 2g dtb 2 soc: gxlx plat: p261 vari: 1g dtb 3 soc: gxlx plat: p261 vari: 2g dtb 4 soc: gxlx plat: p265 vari: 1g dtb 5 soc: gxlx plat: p265 vari: 2g dtb 6 soc: gxlx2 plat: p291 vari: 1g dtb 7 soc: gxlx2 plat: p291 vari: 2g dtb 8 soc: gxlx2 plat: p295 vari: 1g dtb 9 soc: gxlx2 plat: p295 vari: 2g Find match dtb: 7 wipe_data=successfulSecd wipe_cache=successful _find_partition_by_name()-188: do not find match in table logo Cannot find dev. amlmmc cmd failed

store - STORE sub-system

Usage: store store init flag store read name addr off|partition size read 'size' bytes starting at offset 'off' to/from memory address 'addr', skipping bad blocks. store write name addr off|partition size write 'size' bytes starting at offset 'off' to/from memory address 'addr', skipping bad blocks. store rom_write add off size. write uboot to the boot device store erase boot/data: erase the area which is uboot or data store erase partition <partition_name>: erase the area which partition in u-boot store erase dtb store erase key store disprotect key store rom_protect on/off store scrub off|partition size scrub the area from offset and size store dtb iread/read/write addr read/write dtb, size is optional store key read/write addr read/write key, size is optional store mbr addr update mbr/partition table by dtb

cmd store failed Err imgread(L333):Fail to read 0x2000B from part[logo] at offset 0 There is no valid bmp file at the given address [OSD]load fb addr from dts [OSD]fb_addr for logo: 0x3dc00000 [OSD]load fb addr from dts [OSD]fb_addr for logo: 0x3dc00000 [CANVAS]addr=0x3dc00000 width=3840, height=1440 There is no valid bmp file at the given address upgrade_step=2 amlkey_init() enter! [EFUSE_MSG]keynum is 4 [BL31]: tee size: 0 [KM]Error:f[key_manage_query_size]L507:key[ch_code] not programed yet rebootmode=cold_boot Enter USB burn Try connect time out 701, 700, 762 key1 = 7d82dd22 key2 = 7e81dd22 key3 = 728ddd22 time_out = 7a120 ir init irkey - irkey key_value1 key_value2 key_value3 time_value

Usage: irkey Hit any key to stop autoboot: 0

机器什么型号；用的什么镜像；cpu确认型号是什么？

you2366 · 2024-03-02T07:23:10Z

M411A刷Armbian_24.5.0_amlogic_s905l3-cm211_jammy_5.15.149_server_2024.03.01 获取不到IP。设置成静态也不行。
[ OK ] Stopped vnStat network traffic monitor.
[ OK ] Started vnStat network traffic monitor.
[ 34.171156] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
[ 34.173112] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
[ 34.180626] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rmii link mode
[ OK ] Started containerd container runtime.
root@armbian:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
3: ip6tnl0@NONE: mtu 1452 qdisc noop state DOWN group default qlen 1000
link/tunnel6 :: brd :: permaddr 2ed2:bebf:ec7c::
4: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether ee:8a:14:ef:c4:d2 brd ff:ff:ff:ff:ff:ff
altname end0

you2366 · 2024-03-02T14:55:23Z

M411A用Armbian_24.2.0_amlogic_s905l3-cm211_jammy_6.6.15_server_2024.02.01.img刷入emmc。CPU：S905L3 启动出错。
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
Speed: 100, full duplex
*** ERROR: serverip' not set Config file not found Speed: 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.119.103 (111 ms) *** ERROR: serverip' not set
Cannot autoload with TFTPGET
Speed: 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.119.103 (145 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET

you2366 · 2024-03-25T04:37:29Z

无论是安卓9和安卓4.4用U盘启动都是黑屏状态，除非是u盘问题，刚好这个U盘不能读，其他的好像也没什么了。@ophub 大佬可以帮我看看我哪里做漏了吗？

你看一下我的求助。或者加一个USB网卡。

luojiahao2000 · 2024-03-25T08:07:30Z

@you2366 我看你的好想是获取不到ip，而我是直接黑屏没反应。我下班再研究一下，不研究都研究了五六天了。

you2366 · 2024-03-25T08:53:08Z

u-boot.emmc

很多魔百和就是无显示输出的。我出一样。

luojiahao2000 · 2024-03-25T19:31:58Z

@you2366 按照你的教程，在U盘成功启动了，感谢！！！我打算尝试把系统写入盒子里面试试

luojiahao2000 · 2024-03-25T22:21:43Z

写入emmc发现不行，还是用U盘启动吧
安装casaos这个错误解决了好久都不行
重装sudo试过，网上的那些也都试过，不知道怎么搞

root@armbian:# curl -fsSL https://get.casaos.io | sudo bash
sudo: error in /etc/sudo.conf, line 0 while loading plugin "sudoers_policy"
sudo: /usr/libexec/sudo/sudoers.so must be owned by uid 0
sudo: fatal error, unable to load plugins
curl: (23) Failure writing output to destination
root@armbian:#

luojiahao2000 · 2024-03-25T22:59:02Z

搞了一晚上，没搞好。重启了一下，安装casaos成功了

you2366 · 2024-03-26T04:10:41Z

搞了一晚上，没搞好。重启了一下，安装casaos成功了

你怎么不试试系统自带的软件安装程序。还有要改国内源。要不然有些装不了。

luojiahao2000 · 2024-03-26T09:19:18Z

@you2366 改国内源我改了，系统自带的软件安装程序是哪个？我纯小白。

luojiahao2000 · 2024-03-26T09:21:43Z

其实我搞那么久，只是之前搞直播拉了好多网线，我m411a盒子有七八个，所以想着玩玩而已，两个已经刷了安卓9了，留给家人用，剩下的想试试casaos，反正啥都试一下嘛。而且这个机的性能好差，casaos还挺卡的，我是真的不懂linux系统，没有英文基础，全靠翻译，哈哈哈哈哈

foobarjimmy · 2024-03-26T09:26:23Z

其实我搞那么久，只是之前搞直播拉了好多网线，我m411a盒子有七八个，所以想着玩玩而已，两个已经刷了安卓9了，留给家人用，剩下的想试试casaos，反正啥都试一下嘛。而且这个机的性能好差，casaos还挺卡的，我是真的不懂linux系统，没有英文基础，全靠翻译，哈哈哈哈哈

就是在打开的默认webUI 里的 appstore 安装

安装的是 docker 容器

需要了解一点docker 这样可以自己安装一些非appstore的容器或者自定义安装（部署）

you2366 · 2024-03-26T11:42:13Z

@you2366 改国内源我改了，系统自带的软件安装程序是哪个？我纯小白。

首页下面的说明和使用方法详见 Armbian 使用文档里都有，多看看。小盒子就不要安装太占资源的东西了。

安装常用软件
登录 Armbian 系统 → 输入命令：
armbian-software

luojiahao2000 · 2024-03-26T12:19:10Z

@you2366 我的输入这个命令会报错，我昨晚就说解决这个解决不了sudo: error in /etc/sudo.conf, line 0 while loading plugin "sudoers_policy"
sudo: /usr/libexec/sudo/sudoers.so must be owned by uid 0
sudo: fatal error, unable to load plugins
sudo: error in /etc/sudo.conf, line 0 while loading plugin "sudoers_policy"
sudo: /usr/libexec/sudo/sudoers.so must be owned by uid 0
sudo: fatal error, unable to load plugins
[ ERROR ] Dependency installation failed, stop install.

luojiahao2000 · 2024-03-26T16:54:25Z

@you2366 我刷入emmc也是看不到ip了，我看ophub大神有回复你这个问题，你后面解决了吗？是怎样做的？我可能比较愚蠢，所以我看他的回答，我就把bin的文件名改了而已。

KaoluAngel · 2024-03-31T10:37:42Z

感谢你分享测试结果，这已经描述的很清楚了。我把这个设备加入支持列表里。

@ophub 设备信息 |设备信息 [S905L3] 型号 [M411A] 24.5.0 Jammy with Linux 5.15.149-ophub 启动后网络无连接。网口指示灯不亮。解决方法：将U盘插在电脑上，将文件 u-boot-p212.bin复制多一个副本并改名为 u-boot.ext 弹出U盘，到盒子启动就有IP了，网口指示灯正常。用121 ext4写入emmc后启动还是没有IP，网口指示灯不亮。

万分感谢,按照这个方法,终于有armbian的ip出现了
(我都要怀疑人生了) 土拨鼠尖叫.jpg
感谢各位大佬辛苦了~

KaoluAngel · 2024-03-31T11:26:00Z

u-boot.emmc 这是在emmc里复制成的名字

启动后将u-boot.ext文件改名为u-boot.emmc后重启。网口指示灯亮\

感谢大佬们, 我这边u盘启动后把/boot/u-boot.ext文件改名为u-boot.emmc然后再armbian-install一遍
最后poweroff后把电源线和u盘都拔了以后, 再插上电源线就可以正常启动获取IP并且能连上SSH了
💕

you2366 · 2024-03-31T14:16:31Z

u-boot.emmc 这是在emmc里复制成的名字

启动后将u-boot.ext文件改名为u-boot.emmc后重启。网口指示灯亮\

感谢大佬们, 我这边u盘启动后把/boot/u-boot.ext文件改名为u-boot.emmc然后再armbian-install一遍最后poweroff后把电源线和u盘都拔了以后, 再插上电源线就可以正常启动获取IP并且能连上SSH了 💕

你用的是哪个Android刷机包，然用刷哪个版本的armbian包。

KaoluAngel · 2024-03-31T14:36:01Z

u-boot.emmc 这是在emmc里复制成的名字

启动后将u-boot.ext文件改名为u-boot.emmc后重启。网口指示灯亮\

感谢大佬们, 我这边u盘启动后把/boot/u-boot.ext文件改名为u-boot.emmc然后再armbian-install一遍最后poweroff后把电源线和u盘都拔了以后, 再插上电源线就可以正常启动获取IP并且能连上SSH了 💕

你用的是哪个Android刷机包，然用刷哪个版本的armbian包。

Android刷机包: @foobarjimmy 的链接密码nnw3 里的 "A《当贝桌面纯净完美版--固件大全》（固件种类更多）"-"【《通刷固件包》】一包通刷多种型号"-"7《魔百盒CM201-1、CM211-1、CM211-1增强版、UNT402A、MGV2000、M302A等-ZG／%20CH／YS／CW等多种代工-S905L3-通用线刷固件包（支持UWE5621DS及多种WIFI无线型号）》"-"9-魔百盒CM201-1、CM211-1、CM211-1增强版、UNT402A、MGV2000、M302A等-ZG／ CH／YS／CW等多种代工-S905L3-通用线刷固件包（支持UWE5621DS及多种WIFI无线型号）.zip"
armbian版本: 我是照着 @foobarjimmy 来操作的 Armbian_24.5.0_amlogic_s905l3-cm211_jammy_6.1.82_server_2024.03.16.img (uEnv.txt 里面 meson-gxl-s905l3b-m302a.dtb)

因为我没有串口线,所以就想用adb远程进入u盘启动模式,但是开始的安卓9的固件我不知道怎么进u盘启动模式还有开发者模式,
所以就换成了现在这个固件

you2366 · 2024-03-31T16:46:27Z

u-boot.emmc 这是在emmc里复制成的名字

启动后将u-boot.ext文件改名为u-boot.emmc后重启。网口指示灯亮\

感谢大佬们, 我这边u盘启动后把/boot/u-boot.ext文件改名为u-boot.emmc然后再armbian-install一遍最后poweroff后把电源线和u盘都拔了以后, 再插上电源线就可以正常启动获取IP并且能连上SSH了 💕

你用的是哪个Android刷机包，然用刷哪个版本的armbian包。

Android刷机包: @foobarjimmy 的链接密码nnw3 里的 "A《当贝桌面纯净完美版--固件大全》（固件种类更多）"-"【《通刷固件包》】一包通刷多种型号"-"7《魔百盒CM201-1、CM211-1、CM211-1增强版、UNT402A、MGV2000、M302A等-ZG／%20CH／YS／CW等多种代工-S905L3-通用线刷固件包（支持UWE5621DS及多种WIFI无线型号）》"-"9-魔百盒CM201-1、CM211-1、CM211-1增强版、UNT402A、MGV2000、M302A等-ZG／ CH／YS／CW等多种代工-S905L3-通用线刷固件包（支持UWE5621DS及多种WIFI无线型号）.zip"

armbian版本: 我是照着 @foobarjimmy 来操作的 Armbian_24.5.0_amlogic_s905l3-cm211_jammy_6.1.82_server_2024.03.16.img (uEnv.txt 里面 meson-gxl-s905l3b-m302a.dtb)

因为我没有串口线,所以就想用adb远程进入u盘启动模式,但是开始的安卓9的固件我不知道怎么进u盘启动模式还有开发者模式, 所以就换成了现在这个固件

我用你说的固件包和armbian包刷的。最后系统起不来。
Hit any key to stop autoboot: 0
card out
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
(Re)start USB...
USB0: USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
** Bad device usb 1 **
** Bad device usb 2 **
** Bad device usb 3 **
reading emmc_autoscript
831 bytes read in 3 ms (270.5 KiB/s)

Executing script at 01020000

reading u-boot.emmc
606670 bytes read in 20 ms (28.9 MiB/s)

Starting application at 0x01000000 ...

U-Boot 2021.04-00056-g13ac02db31-dirty (Apr 28 2021 - 22:52:02 +0800) p212

Model: Amlogic Meson GXL (S905X) P212 Development Board
SoC: Amlogic Meson Unknown (Unknown) Revision 2a:e (c5:2)
DRAM: 2 GiB
MMC: mmc@70000: 0, mmc@72000: 1, mmc@74000: 2
Loading Environment from nowhere... OK
In: serial
Out: serial
Err: serial
[BL31]: tee size: 0
[BL31]: tee size: 0
Net: eth0: ethernet@c9410000
Hit any key to stop autoboot: 0
starting USB...
Bus usb@c9000000: dwc3_meson_gxl_get_phys: usb2 ports: 2
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus usb@c9000000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
switch to partitions #0, OK
mmc2(part 0) is current device
Scanning mmc 2:1...
Found U-Boot script /boot.scr
1025 bytes read in 1 ms (1001 KiB/s)

Executing script at 08000000

Start AMLOGIC mainline U-boot

Error: "bootfromsd" not defined

373 bytes read in 1 ms (364.3 KiB/s)

Error: "mac" not defined

Error: "eth_mac" not defined

ethaddr=4e:a6:c7:91:df:2c
Error reading cluster
** Unable to read file /zImage **
Failed to load '/zImage'
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
SCRIPT FAILED: continuing...
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Card did not respond to voltage select! : -110
Scanning disk mmc@70000.blk...
Disk mmc@70000.blk not ready
Card did not respond to voltage select! : -110
Scanning disk mmc@72000.blk...
Disk mmc@72000.blk not ready
Scanning disk mmc@74000.blk...
** fs_devread read error - block
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Found 3 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
Card did not respond to voltage select! : -110
Speed: 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.119.105 (119 ms)
*** ERROR: serverip' not set Cannot autoload with TFTPGET missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/01-4e-a6-c7-91-df-2c Speed: 100, full duplex *** ERROR: serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A87769
Speed: 100, full duplex
*** ERROR: serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/C0A8776 Speed: 100, full duplex *** ERROR: serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A877
Speed: 100, full duplex
*** ERROR: serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/C0A87 Speed: 100, full duplex *** ERROR: serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A8
Speed: 100, full duplex
*** ERROR: serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/C0A Speed: 100, full duplex *** ERROR: serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0
Speed: 100, full duplex
*** ERROR: serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/C Speed: 100, full duplex *** ERROR: serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-meson-p212
Speed: 100, full duplex
*** ERROR: serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-meson Speed: 100, full duplex *** ERROR: serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
Speed: 100, full duplex
*** ERROR: serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default Speed: 100, full duplex *** ERROR: serverip' not set
Config file not found
Speed: 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.119.105 (92 ms)
*** ERROR: serverip' not set Cannot autoload with TFTPGET Speed: 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.119.105 (105 ms) *** ERROR: serverip' not set
Cannot autoload with TFTPGET
=>

luojiahao2000 · 2024-03-31T17:01:07Z

@you2366 好像我刷的安卓4.4.2的固件包都可以，就是foobarjimmy大佬刷的安卓9不行，其他都能顺利启动。通常都是插u盘直接启动第一次100%黑屏，然后直接关机重启就进去了。或者用开心电视助手连接ADB，点从u盘启动。

因为我重启就可以不用连adb，所以我都是直接开了一两分钟，然后直接重启就进了。

luojiahao2000 · 2024-03-31T17:03:20Z

现在尝试了KaoluAngel老哥说的，改名字后，成功只用盒子启动了，开心！！！！

KaoluAngel · 2024-04-01T04:13:25Z

现在尝试了KaoluAngel老哥说的，改名字后，成功只用盒子启动了，开心！！！！

@luojiahao2000 太好了~!!!

@you2366 我是线刷的固件包擦除了flash 和 bootloader 不知道是不是这个的影响

robot-bear · 2024-05-11T00:45:25Z

无线和蓝牙有大佬搞通了吗

qiuliunian · 2024-08-15T13:38:40Z

大佬这个armbian是基于debian么

ophub · 2024-08-15T14:04:15Z

4个版本，2个debian系列，2个ubuntu系列

qiuliunian · 2024-08-15T22:39:13Z

4个版本，2个debian系列，2个ubuntu系列
怎么区分Debian和Ubuntu呢

ophub · 2024-08-16T01:51:18Z

jammy和noble是ubuntu，bullseye和bookworm是debian

qiuliunian · 2024-08-16T02:19:30Z

jammy和noble是ubuntu，bullseye和bookworm是debian

bullseye和bookworm是debian bullseye是debian11？ bookworm是debian12？

ophub · 2024-08-16T05:21:56Z

对

qiuliunian · 2024-08-21T10:18:49Z

Armbian_HassIoSupervisor_bookworm_save_2024.08 这个文件刷好了 HA端口8123访问不了啊

AQR0124 · 2024-12-01T03:14:34Z

无线和蓝牙有大佬搞通了吗

同求wifi

foobarjimmy changed the title ~~M411a 安装 armbian 的尝试~~ M411A S905L3 安装 armbian 的尝试 Oct 31, 2023

ophub added documentation Improvements or additions to documentation support This need is supported new box Research Fills in the Blanks labels Oct 31, 2023

foobarjimmy closed this as completed Oct 31, 2023

M411A S905L3 安装 armbian 的尝试 #1817

M411A S905L3 安装 armbian 的尝试 #1817

Comments

foobarjimmy commented Oct 31, 2023 • edited Loading

foobarjimmy commented Oct 31, 2023

foobarjimmy commented Oct 31, 2023

foobarjimmy commented Oct 31, 2023

ophub commented Oct 31, 2023

foobarjimmy commented Oct 31, 2023

ophub commented Oct 31, 2023

qiuliunian commented Jan 8, 2024

foobarjimmy commented Jan 17, 2024

qiuliunian commented Jan 21, 2024

foobarjimmy commented Jan 21, 2024

qiuliunian commented Jan 21, 2024

qiuliunian commented Jan 21, 2024

qiuliunian commented Jan 21, 2024

qiuliunian commented Jan 21, 2024

foobarjimmy commented Jan 21, 2024

qiuliunian commented Jan 21, 2024

foobarjimmy commented Jan 21, 2024

foobarjimmy commented Jan 21, 2024

qiuliunian commented Jan 21, 2024

foobarjimmy commented Jan 21, 2024

qiuliunian commented Jan 21, 2024

you2366 commented Feb 5, 2024 • edited Loading

Executing script at 01020000

Starting application at 0x01000000 ...

Executing script at 08000000

Error: "bootfromsd" not defined

Error: "mac" not defined

Error: "eth_mac" not defined

Loading init Ramdisk from Legacy Image at 13000000 ...

Flattened Device Tree blob at 08008000

foobarjimmy commented Feb 6, 2024

Executing script at 01020000

Starting application at 0x01000000 ...

Executing script at 08000000

Error: "bootfromsd" not defined

Error: "mac" not defined

Error: "eth_mac" not defined

Loading init Ramdisk from Legacy Image at 13000000 ...

Flattened Device Tree blob at 08008000

you2366 commented Mar 2, 2024 • edited Loading

you2366 commented Mar 2, 2024

you2366 commented Mar 25, 2024

luojiahao2000 commented Mar 25, 2024

you2366 commented Mar 25, 2024

luojiahao2000 commented Mar 25, 2024

luojiahao2000 commented Mar 25, 2024

luojiahao2000 commented Mar 25, 2024

you2366 commented Mar 26, 2024 • edited Loading

luojiahao2000 commented Mar 26, 2024

luojiahao2000 commented Mar 26, 2024

foobarjimmy commented Mar 26, 2024

you2366 commented Mar 26, 2024 • edited Loading

luojiahao2000 commented Mar 26, 2024

luojiahao2000 commented Mar 26, 2024

KaoluAngel commented Mar 31, 2024

KaoluAngel commented Mar 31, 2024

you2366 commented Mar 31, 2024

KaoluAngel commented Mar 31, 2024 • edited Loading

you2366 commented Mar 31, 2024

Executing script at 01020000

Starting application at 0x01000000 ...

Executing script at 08000000

Error: "bootfromsd" not defined

Error: "mac" not defined

Error: "eth_mac" not defined

luojiahao2000 commented Mar 31, 2024

luojiahao2000 commented Mar 31, 2024

KaoluAngel commented Apr 1, 2024

robot-bear commented May 11, 2024

qiuliunian commented Aug 15, 2024

ophub commented Aug 15, 2024

qiuliunian commented Aug 15, 2024

ophub commented Aug 16, 2024

qiuliunian commented Aug 16, 2024

ophub commented Aug 16, 2024

qiuliunian commented Aug 21, 2024

foobarjimmy commented Oct 31, 2023 •

edited

Loading

you2366 commented Feb 5, 2024 •

edited

Loading

you2366 commented Mar 2, 2024 •

edited

Loading

you2366 commented Mar 26, 2024 •

edited

Loading

you2366 commented Mar 26, 2024 •

edited

Loading

KaoluAngel commented Mar 31, 2024 •

edited

Loading