Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

怎么编译 https://github.com/unifreq/linux-5.10.y-rk35xx 这个分支的内核？ #1880

Closed
wnpllrzodiac opened this issue Nov 19, 2023 · 22 comments
Closed

怎么编译 https://github.com/unifreq/linux-5.10.y-rk35xx 这个分支的内核？ #1880

wnpllrzodiac opened this issue Nov 19, 2023 · 22 comments

Comments

@wnpllrzodiac
Copy link

sudo ./recompile -k 5.10.y-rk35xx -r https://github.com/wnpllrzodiac/linux-5.10.y-rk35xx@pantherx2
出现了很多需要配置的选项。是不是config模板有问题，缺了很多配置项？

[ INFO ] Copy [ /home/zodiac/work/git/amlogic-s9xxx-armbian/compile-kernel/tools/config/config-5.10 ] to [ .config ]
[ STEPS ] Start compilation kernel [ linux-5.10.y-rk35xx-pantherx2 ]...
  SYNC    include/config/auto.conf.cmd
  HOSTCC  scripts/basic/fixdep
  HOSTCC  scripts/kconfig/conf.o
  HOSTCC  scripts/kconfig/confdata.o
  HOSTCC  scripts/kconfig/expr.o
  LEX     scripts/kconfig/lexer.lex.c
  YACC    scripts/kconfig/parser.tab.[ch]
  HOSTCC  scripts/kconfig/preprocess.o
  HOSTCC  scripts/kconfig/symbol.o
  HOSTCC  scripts/kconfig/util.o
  HOSTCC  scripts/kconfig/lexer.lex.o
  HOSTCC  scripts/kconfig/parser.tab.o
  HOSTLD  scripts/kconfig/conf
*
* Restart config...
*
*
* General setup
*
Compile also drivers which will not load (COMPILE_TEST) [N/y/?] n
Compile the kernel with warnings as errors (WERROR) [Y/n/?] (NEW)
@ophub
Copy link
Owner

ophub commented Nov 20, 2023 •
edited
Loading

https://github.com/ophub/amlogic-s9xxx-armbian/blob/main/compile-kernel/README.cn.md

看仓库的说明，-r参数的语法：如 owner@branch 或 owner/repo 或 owner/repo@branch

步骤1：把你的config-5.10模版放在 /compile-kernel/tools/config 里替换了现在的 config-5.10（现在是主线的config，必须换成kernel_rx35xx的，去kernel仓库下载一个现在的内核，解压复制里面的config改名）

步骤2：编译 sudo ./recompile -k 5.10.1 -r unifreq/linux-5.10.y-rk35xx

@wnpllrzodiac
Copy link
Author

https://github.com/ophub/amlogic-s9xxx-armbian/blob/main/compile-kernel/README.cn.md

看仓库的说明，-r参数的语法：如 owner@branch 或 owner/repo 或 owner/repo@branch

步骤1：把你的config-5.10模版放在 /compile-kernel/tools/config 里替换了现在的 config-5.10（现在是主线的config，必须换成kernel_rx35xx的，去kernel仓库下载一个现在的内核，解压复制里面的config改名）

步骤2：编译 sudo ./recompile -k 5.10.1 -r unifreq/linux-5.10.y-rk35xx

好的，我看了代码摸索出来是如下
-r wnpllrzodiac/linux-5.10.y-rk35xx@pantherx2

我试试你的方法，多谢！

@wnpllrzodiac
Copy link
Author

wnpllrzodiac commented Nov 20, 2023 •
edited
Loading

  1. 下载了个包5.10.160-rk35xx-flippy-2311a.tar.gz
  2. 解压 header-5.10.160-rk35xx-flippy-2311a.tar.gz 里面的.config 覆盖 compile-kernel/tools/config/config-5.10
  3. sudo ./recompile -k 5.10.1 -r unifreq/linux-5.10.y-rk35xx
    问题似乎没有解决
[ STEPS ] Start compilation kernel [ linux-5.10.y-rk35xx-main ]...
  SYNC    include/config/auto.conf.cmd
  HOSTCC  scripts/basic/fixdep
  HOSTCC  scripts/kconfig/conf.o
  HOSTCC  scripts/kconfig/confdata.o
  HOSTCC  scripts/kconfig/expr.o
  LEX     scripts/kconfig/lexer.lex.c
  YACC    scripts/kconfig/parser.tab.[ch]
  HOSTCC  scripts/kconfig/preprocess.o
  HOSTCC  scripts/kconfig/symbol.o
  HOSTCC  scripts/kconfig/util.o
  HOSTCC  scripts/kconfig/lexer.lex.o
  HOSTCC  scripts/kconfig/parser.tab.o
  HOSTLD  scripts/kconfig/conf
*
* Restart config...
*
*
* GCC plugins
*
GCC plugins (GCC_PLUGINS) [Y/n/?] (NEW)

@wnpllrzodiac
Copy link
Author

用这个文件替换，问题解决
https://raw.githubusercontent.com/ophub/kernel/main/kernel-config/release/rk35xx/config-5.10

@wnpllrzodiac
Copy link
Author

遇到了新问题
代码没有编译，直接产生了镜像文件，看了一下，新的dtb没有加入。
sudo ./recompile -k 5.10.161 -r wnpllrzodiac/linux-5.10.y-rk35xx@pantherx2 -a false
看起来是编译报错了。

  HDRINST usr/include/linux/neighbour.h
  HDRINST usr/include/linux/pps.h
  DTC     arch/arm64/boot/dts/rockchip/rk3566-jp-tvbox.dtb
  DTC     arch/arm64/boot/dts/rockchip/rk3566-panther-x2.dtb
  DTC     arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dtb
  HDRINST usr/include/linux/bt-bmc.h
  HDRINST usr/include/linux/io_uring.h
  DTC     arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-rpi-cm4-io.dtb
  HDRINST usr/include/linux/tipc_sockets_diag.h
  DTC     arch/arm64/boot/dts/rockchip/overlay/rk3588-spi0-m2-cs1-spidev.dtbo
Error: arch/arm64/boot/dts/rockchip/rk3566-panther-x2.dts:556.1-16 Label or path usb_host0_xhci not found
Error: arch/arm64/boot/dts/rockchip/rk3566-panther-x2.dts:573.1-15 Label or path usb2phy0_host not found
Error: arch/arm64/boot/dts/rockchip/rk3566-panther-x2.dts:577.1-14 Label or path usb2phy0_otg not found
FATAL ERROR: Syntax error parsing input tree
make[2]: *** [scripts/Makefile.lib:386: arch/arm64/boot/dts/rockchip/rk3566-panther-x2.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
  DTC     arch/arm64/boot/dts/rockchip/overlay/rk3588-spi1-m1-cs0-spidev.dtbo
  HDRINST usr/include/linux/tls.h
  HDRINST usr/include/linux/tc_act/tc_mirred.h
  DTC     arch/arm64/boot/dts/rockchip/overlay/rk3588-spi1-m1-cs1-spidev.dtbo
  HDRINST usr/include/linux/tc_act/tc_tunnel_key.h
  DTC     arch/arm64/boot/dts/rockchip/overlay/rk3588-spi4-m2-cs0-spidev.dtbo

make[1]: *** [scripts/Makefile.build:516: arch/arm64/boot/dts/rockchip] Error 2
make: *** [Makefile:1471: dtbs] Error 2
make: *** Waiting for unfinished jobs....

[ STEPS ] Install modules...
sed: can't read modules.order: No such file or directory
make: *** [Makefile:1556: _modinst_] Error 2
Usage: /usr/local/toolchain/arm-gnu-toolchain-13.2.rel1-x86_64-aarch64-none-linux-gnu/bin/aarch64-none-linux-gnu-strip <option(s)> in-file(s)
 Removes symbols and sections from files
 The options are:
  -I --input-target=<bfdname>      Assume input file is in format <bfdname>
  -O --output-target=<bfdname>     Create an output file in format <bfdname>
  -F --target=<bfdname>            Set both input and output format to <bfdname>
  -p --preserve-dates              Copy modified/access timestamps to the output
  -D --enable-deterministic-archives
                                   Produce deterministic output when stripping archives
  -U --disable-deterministic-archives
                                   Disable -D behavior (default)
  -R --remove-section=<name>       Also remove section <name> from the output
     --remove-relocations <name>   Remove relocations from section <name>
     --strip-section-headers       Strip section headers from the output
  -s --strip-all                   Remove all symbol and relocation information
  -g -S -d --strip-debug           Remove all debugging symbols & sections
     --strip-dwo                   Remove all DWO sections
     --strip-unneeded              Remove all symbols not needed by relocations
     --only-keep-debug             Strip everything but the debug information
  -M  --merge-notes                Remove redundant entries in note sections (default)
      --no-merge-notes             Do not attempt to remove redundant notes
  -N --strip-symbol=<name>         Do not copy symbol <name>
     --keep-section=<name>         Do not strip section <name>
  -K --keep-symbol=<name>          Do not strip symbol <name>
     --keep-section-symbols        Do not strip section symbols
     --keep-file-symbols           Do not strip file symbol(s)
  -w --wildcard                    Permit wildcard in symbol comparison
  -x --discard-all                 Remove all non-global symbols
  -X --discard-locals              Remove any compiler-generated symbols
  -v --verbose                     List all object files modified
  -V --version                     Display this program's version number
  -h --help                        Display this output
     --info                        List object formats & architectures supported
  -o <file>                        Place stripped output into <file>
/usr/local/toolchain/arm-gnu-toolchain-13.2.rel1-x86_64-aarch64-none-linux-gnu/bin/aarch64-none-linux-gnu-strip: supported targets: elf64-littleaarch64 elf64-bigaarch64 elf32-littleaarch64 elf32-bigaarch64 elf32-littlearm elf32-bigarm pei-aarch64-little pe-aarch64-little elf64-little elf64-big elf32-little elf32-big elf32-littlearm-fdpic elf32-bigarm-fdpic srec symbolsrec verilog tekhex binary ihex plugin
[ STEPS ] Install headers...
find: ‘Module.symvers’: No such file or directory
[ SUCCESS ] The headers is installed successfully.
[ STEPS ] Create chroot...
[ INFO ] Armbian PLATFORM: [ rockchip ]
cp: cannot stat '/home/zodiac/work/git/amlogic-s9xxx-armbian/compile-kernel/kernel/linux-5.10.y-rk35xx-pantherx2/System.map': No such file or directory
cp: cannot stat '/home/zodiac/work/git/amlogic-s9xxx-armbian/compile-kernel/kernel/linux-5.10.y-rk35xx-pantherx2/arch/arm64/boot/Image': No such file or directory
cp: cannot stat '/home/zodiac/work/git/amlogic-s9xxx-armbian/compile-kernel/output/chroot/root/boot/vmlinuz-5.10.160-ophub': No such file or directory
[ INFO ] Enter the chroot armbian system...
[ INFO ] Current system: [ aarch64 ]
[ INFO ] Current path: [ / ]
[ INFO ] Compile the kernel version: [ 5.10.160-ophub ]
[ STEPS ] Generate uInitrd file...
update-initramfs: Generating /boot/initrd.img-5.10.160-ophub
depmod: WARNING: could not open modules.builtin at /lib/modules/5.10.160-ophub: No such file or directory
depmod: WARNING: could not open modules.builtin.modinfo at /lib/modules/5.10.160-ophub: No such file or directory
/usr/bin/cat: /var/tmp/mkinitramfs_sZcQ5m/lib/modules/5.10.160-ophub/modules.builtin: No such file or directory
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = (unset),
        LC_ALL = (unset),
        LC_PAPER = "zh_CN.UTF-8",
        LC_NUMERIC = "zh_CN.UTF-8",
        LC_IDENTIFICATION = "zh_CN.UTF-8",
        LC_MEASUREMENT = "zh_CN.UTF-8",
        LC_NAME = "zh_CN.UTF-8",
        LC_TELEPHONE = "zh_CN.UTF-8",
        LC_ADDRESS = "zh_CN.UTF-8",
        LC_MONETARY = "zh_CN.UTF-8",
        LC_TIME = "zh_CN.UTF-8",
        LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
W: Can't find modules.builtin.modinfo (for locating built-in drivers' firmware, supported in Linux >=5.2)
W: Couldn't identify type of root file system for fsck hook
depmod: WARNING: could not open modules.builtin at /var/tmp/mkinitramfs_sZcQ5m/lib/modules/5.10.160-ophub: No such file or directory
depmod: WARNING: could not open modules.builtin.modinfo at /var/tmp/mkinitramfs_sZcQ5m/lib/modules/5.10.160-ophub: No such file or directory
update-initramfs: Armbian: Converting to u-boot format: /boot/uInitrd-5.10.160-ophub
Image Name:   uInitrd
Created:      Mon Nov 20 11:14:47 2023
Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
Data Size:    11921412 Bytes = 11642.00 KiB = 11.37 MiB
Load Address: 00000000
Entry Point:  00000000
update-initramfs: Armbian: Symlinking /boot/uInitrd-5.10.160-ophub to /boot/uInitrd
'/boot/uInitrd' -> 'uInitrd-5.10.160-ophub'
update-initramfs: Armbian: done.
[ SUCCESS ] The initrd.img and uInitrd file is Successfully generated.
[ INFO ] File situation in the /boot directory after update:
-rw-r--r-- 1 root root   217675 Nov 20 11:14 config-5.10.160-ophub
-rw-r--r-- 1 root root 11921412 Nov 20 11:14 initrd.img-5.10.160-ophub
-rw-r--r-- 1 root root 11921476 Nov 20 11:14 uInitrd-5.10.160-ophub
[ INFO ] Copy the generated files from [ /home/zodiac/work/git/amlogic-s9xxx-armbian/compile-kernel/output/chroot/root/boot ]
[ STEPS ] Packing the [ 5.10.160-ophub ] dtbs packages...
[ SUCCESS ] The [ dtb-rockchip-5.10.160-ophub.tar.gz ] file is packaged.
[ STEPS ] Packing the [ 5.10.160-ophub ] boot, modules and header packages...
[ SUCCESS ] The [ boot-5.10.160-ophub.tar.gz ] file is packaged.
[ SUCCESS ] The [ modules-5.10.160-ophub.tar.gz ] file is packaged.
[ SUCCESS ] The [ header-5.10.160-ophub.tar.gz ] file is packaged.
[ SUCCESS ] The [ sha256sums ] file has been generated
[ INFO ] Kernel series files are stored in [ /home/zodiac/work/git/amlogic-s9xxx-armbian/compile-kernel/output ].
[ STEPS ] Clear the space and update-grub...
[ SUCCESS ] All processes have been completed.
[ STEPS ] Server space usage after compilation:
Filesystem     Type  Size  Used Avail Use% Mounted on
/dev/sda2      ext4  491G   47G  420G  10% /

[ SUCCESS ] All process completed successfully.

@ophub
Copy link
Owner

ophub commented Nov 20, 2023

可能你新加的代码有问题，你编译f大仓库的肯定可以顺利完成。

@wnpllrzodiac
Copy link
Author

可能你新加的代码有问题，你编译f大仓库的肯定可以顺利完成。

是的。f大的 linux-5.10.y-rk35xx 分支编译没问题。
估计5.x的代码不兼容 pantherx2的6.x的dts，我删掉了几个部分，能编译过了。

@wnpllrzodiac
Copy link
Author

@ophub 内核编译好了，也打包上传release目录了。但是更新内核后，又变砖了。
好像设置 -u rk35xx 并不生效。始终都是stable。所以我release只能打stable 的tag
询问下，/etc/ophub-release 需要手动修改适配吗？目前我没有改，都是默认状态。不知道启动的时候会不读读取这个文本做逻辑

root@armbian:~# armbian-update -k 5.10.160 -r wnpllrzodiac/linux-5.10.y-rk35xx
[ STEPS ] Welcome to the kernel update tool.
[ STEPS ] Start checking dependencies...
[ INFO ] Dependency check completed.

[ STEPS ] Start initializing parameters...
[ INFO ] Armbian platform: [ rockchip ]
[ INFO ] Kernel download repository: [ wnpllrzodiac/linux-5.10.y-rk35xx ]
[ INFO ] Kernel tags: [ stable ]
[ INFO ] Specify kernel: [ 5.10.160 ]
[ INFO ] Backup kernel: [ yes ]
[ INFO ] Armbian is running on: [ /dev/mmcblk1 ]

[ STEPS ] Start querying kernel version...

[ STEPS ] Start downloading kernel package...
[ INFO ] Download kernel from: [ https://github.com/wnpllrzodiac/linux-5.10.y-rk35xx/releases/download/kernel_stable/5.10.160.tar.gz ]
[ INFO ] Download kernel to:   [ /tmp/tmp.W2OPspS1rQ ]


^C
root@armbian:~# ^C
root@armbian:~# armbian-update -k 5.10.160 -r wnpllrzodiac/linux-5.10.y-rk35xx
[ STEPS ] Welcome to the kernel update tool.
[ STEPS ] Start checking dependencies...
[ INFO ] Dependency check completed.

[ STEPS ] Start initializing parameters...
[ INFO ] Armbian platform: [ rockchip ]
[ INFO ] Kernel download repository: [ wnpllrzodiac/linux-5.10.y-rk35xx ]
[ INFO ] Kernel tags: [ stable ]
[ INFO ] Specify kernel: [ 5.10.160 ]
[ INFO ] Backup kernel: [ yes ]
[ INFO ] Armbian is running on: [ /dev/mmcblk1 ]

[ STEPS ] Start querying kernel version...

[ STEPS ] Start downloading kernel package...
[ INFO ] Download kernel from: [ https://github.com/wnpllrzodiac/linux-5.10.y-rk35xx/releases/download/kernel_stable/5.10.160.tar.gz ]
[ INFO ] Download kernel to:   [ /tmp/tmp.kXTHnRqlf6 ]

[ STEPS ] Start checking kernel package...
[ INFO ] Kernel name: [ 5.10.160-ophub ]
[ INFO ] Start performing sha256sum verification...
[ INFO ] (1/4) Verification of [ boot-5.10.160-ophub.tar.gz ] succeeded.
[ INFO ] (2/4) Verification of [ dtb-rockchip-5.10.160-ophub.tar.gz ] succeeded.
[ INFO ] (3/4) Verification of [ modules-5.10.160-ophub.tar.gz ] succeeded.
[ INFO ] (4/4) Verification of [ header-5.10.160-ophub.tar.gz ] succeeded.

[ STEPS ] Start backing up current kernel...
[ INFO ] (1/4) Backup of [ boot-6.1.59-ophub.tar.gz ] succeeded.
[ INFO ] (2/4) Backup of [ dtb-rockchip-6.1.59-ophub.tar.gz ] succeeded.
[ INFO ] (3/4) Backup of [ modules-6.1.59-ophub.tar.gz ] succeeded.
[ INFO ] (4/4) Backup of [ header-6.1.59-ophub.tar.gz ] succeeded.
[ INFO ] [ sha256sums ] file has been generated.
[ INFO ] Current kernel backup path: [ /ddbr/backup/6.1.59 ].

[ STEPS ] Start unpacking kernel...
[ INFO ] (1/4) Unpacking [ boot-5.10.160-ophub.tar.gz ] succeeded.
[ INFO ] (2/4) Unpacking [ dtb-rockchip-5.10.160-ophub.tar.gz ] succeeded.
[ INFO ] (3/4) Unpacking [ modules-5.10.160-ophub.tar.gz ] succeeded.
[ INFO ] (4/4) Unpacking [ header-5.10.160-ophub.tar.gz ] succeeded.

[ SUCCESS ] Kernel update successful. Armbian system is restarting...

@ophub
Copy link
Owner

ophub commented Nov 20, 2023 •
edited
Loading

你上面的命令里没有使用-u

先同步最新脚本，昨天已经添加了rk35xx的支持了： e9e50ae

armbian-sync

再打开这个文件修改下默认设置，以后就不用输那么多参数了，当然不改每次记得输入也可以

nano /etc/ophub-release

KERNEL_REPO='wnpllrzodiac/linux-5.10.y-rk35xx'
KERNEL_TAGS='rk35xx'

@wnpllrzodiac
Copy link
Author

好的。回家我再试试。变砖又要线刷了。u盘好像也不能启动

@wnpllrzodiac
Copy link
Author

你上面的命令里没有使用-u

先同步最新脚本，昨天已经添加了rk35xx的支持了： e9e50ae

armbian-sync

再打开这个文件修改下默认设置，以后就不用输那么多参数了，当然不改每次记得输入也可以

nano /etc/ophub-release

KERNEL_REPO='wnpllrzodiac/linux-5.10.y-rk35xx'
KERNEL_TAGS='rk35xx'

以上你的修改只针对升级步骤吗？我现在的问题是升级成功后，重启就连不上机器了。

@ophub
Copy link
Owner

ophub commented Nov 20, 2023 •
edited
Loading

armbian-update就是更换内核的脚本。使用armbian-sync拉去最新版，你的不让使用rk35xx可能是因为你使用的昨天以前的固件，没更新这个脚本，不让你使用rk35xx

你是什么机器，rk35xx内核可用的机型是rk3528/rk3566/rk3568的部分机型。你是在内核里添加了什么？

@wnpllrzodiac
Copy link
Author

armbian-update就是更换内核的脚本。使用armbian-sync拉去最新版，你的不让使用rk35xx可能是因为你使用的昨天以前的固件，没更新这个脚本，不让你使用rk35xx

你是什么机器，rk35xx内核可用的机型是rk3528/rk3566/rk3568的部分机型。你是在内核里添加了什么？

pantherX2

unifreq/linux-5.10.y-rk35xx#4 添加了pantherX2 的dtb支持。这样我就可以在5.x内核上用到编解码特性了。

@wnpllrzodiac
Copy link
Author

回家发现设备能正常启动，网卡驱动没了。没网没显示接口。没法整了。

@wnpllrzodiac
Copy link
Author

ethtool -i eth0
driver: st_gmac
version: 6.1.60-ophub
firmware-version:
expansion-rom-version:
bus-info:
supports-statistics: yes
supports-test: yes
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: no

@wnpllrzodiac
Copy link
Author

/dev/mmcblk1p2

mount /dev/mmcblk0p1 /mnt/mmc

journalctl -f

@13584452567
Copy link
Contributor

如果你只是想替换内核的话，完全可以手动编译出然后去替换boot分区的内核映像。

@wnpllrzodiac
Copy link
Author

如果你只是想替换内核的话，完全可以手动编译出然后去替换boot分区的内核映像。

ophub的armbian-update 工具是可以走完流程升级的。只是现在重启后，网卡ip获取失败了

从日志看 dhcp 45秒超时了。
我现在想编一个完整版系统镜像，再试试。
目前没有办法串口调试。pantherx2没有显示输出，没网络的话没法调试。

2023-11-20T23:34:15.691421+08:00 armbian NetworkManager[927]: <info>  [1700494455.6909] dhcp4 (eth0): activation: beginning transaction (timeout in 45 seconds)
2023-11-20T23:35:00.614866+08:00 armbian NetworkManager[927]: <info>  [1700494500.6129] device (eth0): state change: ip-config -> failed (reason 'ip-config-unavailable', sys-iface-state: 'managed')
2023-11-20T23:35:00.615770+08:00 armbian NetworkManager[927]: <info>  [1700494500.6153] manager: NetworkManager state is now DISCONNECTED
2023-11-20T23:35:00.617678+08:00 armbian NetworkManager[927]: <warn>  [1700494500.6169] device (eth0): Activation: failed for connection 'Wired connection 1'
2023-11-20T23:35:00.618987+08:00 armbian NetworkManager[927]: <info>  [1700494500.6184] device (eth0): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
2023-11-20T23:35:00.649238+08:00 armbian NetworkManager[927]: <info>  [1700494500.6487] dhcp4 (eth0): canceled DHCP transaction

@wnpllrzodiac
Copy link
Author

WARN: brmfmac driver doesn't work properly with virtual interfaces and
it can cause kernel panic. For this reason we disallow virtual
interfaces for your adapter.
For more info: oblique/create_ap#203
ERROR: Invalid passphrase length 7 (expected 8..63)

@13584452567
Copy link
Contributor

13584452567 commented Nov 23, 2023 •
edited
Loading

根据本项目的教程，使用github actions进行编译吧

https://github.com/ophub/amlogic-s9xxx-armbian/blob/main/documents/README.cn.md

@wnpllrzodiac
Copy link
Author

镜像光盘打出来了。我通过修改首次启动脚本，开启wifi连接，能进到5.10.x内核了。看了下 /dev/mpp_service 等服务还是没有。所以基本放弃这个分支了。eth0确实无法正常使用，但以不重要。看来目前，也只有istoreos的版本。支持mpp硬件编解码。他们的内核文件结构又不一样，/boot分区下，一个img，一个dtb就没有了。

@nerimoe nerimoe mentioned this issue Dec 20, 2023
Closed
@HelloTheAsia HelloTheAsia mentioned this issue Jan 15, 2024
Closed
@chouex
Copy link

chouex commented Jan 27, 2024

#2027 (comment)
有人說rk35xx eth問題是因為uboot問題(wifi能用), 最後eth和mpp_service 解決沒

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@chouex @wnpllrzodiac @13584452567 @ophub