我家云刷Armbian_24.5.0_rockchip_chainedbox_noble_6.6.25_server_2024.04.08.img.gz 无法使用

[liyiranlab]

Device Information | 设备信息

• SOC: [e.g. rk3328]
• Model [e.g. chainedbox]

Armbian Version | 系统版本

• Kernel Version: [e.g. 5.15.100]
• Release: [e.g. noble]

Describe the bug | 问题描述
我家云刷Armbian_24.5.0_rockchip_chainedbox_noble_6.6.25_server_2024.04.08.img.gz,[Armbian_24.5.0_rockchip_chainedbox_jammy_6.6.25_server_2024.04.08.img.gz](https://github.com/ophub/amlogic-s9xxx-armbian/releases/download/Armbian_bookworm_save_2024.04/Armbian_24.5.0_rockchip_chainedbox_bookworm_6.6.25_server_2024.04.08.img.gz)都， 无法使用，上电，连接网线后后找不到设备。
ttl信息
1.16 20190528
ID:0x805 Y
In
DDR3
333MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
ddrconfig:6
OUT
Boot1 Release Time: May 13 2019 17:34:36, version: 2.50
ChipType = 0x11, 233
mmc2:cmd19,100
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=7457MB
FwPartOffset=2000 , 2000
SdmmcInit=0 NOT PRESENT
StorageInit ok = 12804
Raw SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part: 0, name: primary, start:0x8000, size:0xff800
GPT part: 1, name: primary, start:0x108000, size:0x4ff800
no find partition:uboot.
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xae230
RunBL31 0x40000
�INFO: Preloader serial: 2
NOTICE: BL31: v1.3(debug):403e0b816
NOTICE: BL31: Built : 14:13:08, Aug 11 2020
NOTICE: BL31:Rockchip release version: v1.3
INFO: ARM GICv2 driver initialized
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 1
INFO: plat_rockchip_pmu_init: pd status 0xe
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9

U-Boot 2021.07-armbian (Apr 03 2022 - 17:05:26 +0800)

Model: Chainedbox
DRAM: 2 GiB
PMIC: RK8050 (on=0x40, off=0x00)
MMC: mmc@ff500000: 1, mmc@ff520000: 0
Loading Environment from MMC... Card did not respond to voltage select! : -110
*** Warning - No block device, using default environment

In: serial@ff130000
Out: serial@ff130000
Err: serial@ff130000
Model: Chainedbox
Net: eth0: ethernet@ff540000
Hit any key to stop autoboot: 0
Card did not respond to voltage select! : -110
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
3180 bytes read in 3 ms (1 MiB/s)

Executing script at 00500000

Boot script loaded from mmc 0
373 bytes read in 3 ms (121.1 KiB/s)
13265020 bytes read in 299 ms (42.3 MiB/s)
46486016 bytes read in 1036 ms (42.8 MiB/s)
53622 bytes read in 9 ms (5.7 MiB/s)
Failed to load '/dtb/rockchip/overlay/rk3328-fixup.scr'
Moving Image from 0x2000000 to 0x2080000, end=4dc0000

Loading init Ramdisk from Legacy Image at 06000000 ...

Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
Data Size: 13264956 Bytes = 12.7 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK

Flattened Device Tree blob at 01f00000

Booting using the fdt blob at 0x1f00000
Loading Ramdisk to 7d284000, end 7df2a83c ... OK
Loading Device Tree to 000000007d20e000, end 000000007d283fff ... OK

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.6.25-spring-plowing (root@fv-az1501-662) (aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 13.2.rel1 (Build arm-13.7)) 13.2.1 20231009, GNU ld (Arm GNU Toolchain 13.2.rel1 (Build arm-13.7)) 2.41.0.20231009) #1 SMP Fri Apr 5 03:34:06 EDT 2024
[ 0.000000] Machine model: Chainedbox L1 Pro
[ 0.000000] efi: UEFI not found.
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] cma: Reserved 256 MiB at 0x000000006b200000 on node -1
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] No bootconfig data provided, so skipping bootconfig
[ 0.000000] percpu: Embedded 29 pages/cpu s80488 r8192 d30104 u118784
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: root=UUID=aa6429e9-c7ae-47f0-8017-e2dad31d45d9 rootwait rootfstype=ext4 console=ttyS2,1500000 consoleblank=0 loglevel=7 ubootpart=68a97452-95b2-498d-b4f0-8f1005ccace0 usb-storage.quirks=0x05e3:0x0612:u,0x1d6b:0x0003:u,0x05e3:0x0610:u usbcore.autosuspend=-1 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[ 0.000000] Unknown kernel command line parameters "ubootpart=68a97452-95b2-498d-b4f0-8f1005ccace0 cgroup_enable=memory cgroup_memory=1", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000067200000-0x000000006b200000] (64MB)
[ 0.000000] Memory: 1670668K/2095104K available (18624K kernel code, 3924K rwdata, 15960K rodata, 6720K init, 905K bss, 162292K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001843] Console: colour dummy device 80x25
[ 0.001911] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001931] pid_max: default: 32768 minimum: 301
[ 0.006148] LSM: initializing lsm=capability,selinux,integrity
[ 0.009379] SELinux: Initializing.
[ 0.017940] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.017971] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.025229] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.025615] rcu: Hierarchical SRCU implementation.
[ 0.025623] rcu: Max phase no-delay instances is 1000.
[ 0.028670] EFI services will not be available.
[ 0.029377] smp: Bringing up secondary CPUs ...
[ 0.030316] Detected VIPT I-cache on CPU1
[ 0.030485] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.031542] Detected VIPT I-cache on CPU2
[ 0.031693] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.032850] Detected VIPT I-cache on CPU3
[ 0.033013] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.033164] smp: Brought up 1 node, 4 CPUs
[ 0.033177] SMP: Total of 4 processors activated.
[ 0.033184] CPU features: detected: 32-bit EL0 Support
[ 0.033188] CPU features: detected: 32-bit EL1 Support
[ 0.033198] CPU features: detected: CRC32 instructions
[ 0.033326] CPU: All CPU(s) started at EL2
[ 0.033344] alternatives: applying system-wide alternatives
[ 0.037104] devtmpfs: initialized
[ 0.055888] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.055925] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.068593] prandom: seed boundary self test passed
[ 0.069931] prandom: 100 self tests passed
[ 0.070009] pinctrl core: initialized pinctrl subsystem
[ 0.070831] DMI not present or invalid.
[ 0.072325] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.074490] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.075100] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.075710] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.075814] audit: initializing netlink subsys (disabled)
[ 0.076291] audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1
[ 0.077632] thermal_sys: Registered thermal governor 'step_wise'
[ 0.077734] cpuidle: using governor ladder
[ 0.078070] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.078240] ASID allocator initialised with 65536 entries
[ 0.078602] Serial: AMBA PL011 UART driver
[ 0.088844] platform ff370000.vop: Fixed dependency cycle(s) with /hdmi@ff3c0000
[ 0.088967] platform ff3c0000.hdmi: Fixed dependency cycle(s) with /vop@ff370000
[ 0.100718] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.101397] rockchip-gpio ff210000.gpio: probed /pinctrl/gpio@ff210000
[ 0.102268] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.102732] rockchip-gpio ff220000.gpio: probed /pinctrl/gpio@ff220000
[ 0.103320] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.103792] rockchip-gpio ff230000.gpio: probed /pinctrl/gpio@ff230000
[ 0.104349] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.105051] rockchip-gpio ff240000.gpio: probed /pinctrl/gpio@ff240000
[ 0.111833] Modules: 21184 pages in range for non-PLT usage
[ 0.111851] Modules: 512704 pages in range for PLT usage
[ 0.113437] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.113455] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.113465] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.113470] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.113480] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.113488] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.113499] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.113507] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.115491] cryptd: max_cpu_qlen set to 1000
[ 0.184738] raid6: neonx8 gen() 1130 MB/s
[ 0.252811] raid6: neonx4 gen() 1109 MB/s
[ 0.320888] raid6: neonx2 gen() 1063 MB/s
[ 0.388968] raid6: neonx1 gen() 910 MB/s
[ 0.457048] raid6: int64x8 gen() 707 MB/s
[ 0.525135] raid6: int64x4 gen() 783 MB/s
[ 0.593210] raid6: int64x2 gen() 699 MB/s
[ 0.661307] raid6: int64x1 gen() 517 MB/s
[ 0.661316] raid6: using algorithm neonx8 gen() 1130 MB/s
[ 0.729416] raid6: .... xor() 827 MB/s, rmw enabled
[ 0.729424] raid6: using neon recovery algorithm
[ 0.729897] ACPI: Interpreter disabled.
[ 0.731239] iommu: Default domain type: Translated
[ 0.731256] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.732462] SCSI subsystem initialized
[ 0.733233] usbcore: registered new interface driver usbfs
[ 0.733284] usbcore: registered new interface driver hub
[ 0.733374] usbcore: registered new device driver usb
[ 0.734103] mc: Linux media interface: v0.10
[ 0.734182] videodev: Linux video capture interface: v2.00
[ 0.734558] EDAC MC: Ver: 3.0.0
[ 0.735613] scmi_core: SCMI protocol bus registered
[ 0.736250] Advanced Linux Sound Architecture Driver Initialized.
[ 0.738231] vgaarb: loaded
[ 0.738990] clocksource: Switched to clocksource arch_sys_counter
[ 0.744876] VFS: Disk quotas dquot_6.6.0
[ 0.744946] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.745392] FS-Cache: Loaded
[ 0.745989] pnp: PnP ACPI: disabled
[ 0.760955] NET: Registered PF_INET protocol family
[ 0.761344] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.767068] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.767129] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.767155] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.767372] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.768125] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.768989] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.769319] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.769409] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.769963] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.770010] NET: Registered PF_XDP protocol family
[ 0.770031] PCI: CLS 0 bytes, default 64
[ 0.770543] Trying to unpack rootfs image as initramfs...
[ 0.770807] kvm [1]: IPA Size Limit: 40 bits
[ 0.776763] kvm [1]: vgic interrupt IRQ9
[ 0.776825] kvm [1]: Hyp mode initialized successfully
[ 0.781150] Initialise system trusted keyrings
[ 0.781648] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.781750] zbud: loaded
[ 0.787259] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.790045] fuse: init (API version 7.39)
[ 0.791639] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 0.866921] NET: Registered PF_ALG protocol family
[ 0.867066] xor: measuring software checksum speed
[ 0.874888] 8regs : 1261 MB/sec
[ 0.882714] 32regs : 1262 MB/sec
[ 0.891100] arm64_neon : 1174 MB/sec
[ 0.891113] xor: using function: 32regs (1262 MB/sec)
[ 0.891135] Key type asymmetric registered
[ 0.891144] Asymmetric key parser 'x509' registered
[ 0.891317] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.891672] io scheduler mq-deadline registered
[ 0.891683] io scheduler kyber registered
[ 0.892004] io scheduler bfq registered
[ 0.987644] gpio-syscon ff100000.syscon:gpio: can't read the data register offset!
[ 0.997717] dma-pl330 ff1f0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.997744] dma-pl330 ff1f0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 1.001853] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 1.006713] printk: console [ttyS2] disabled
[ 1.007320] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 21, base_baud = 1500000) is a 16550A
[ 1.007414] printk: console [ttyS2] enabled
[ 1.104168] Serial: AMBA driver
[ 1.106343] random: crng init done
[ 1.110062] rockchip-vop ff370000.vop: Adding to iommu group 2
[ 1.123782] brd: module loaded
[ 1.242453] loop: module loaded
[ 1.251132] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[ 1.251751] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[ 1.252503] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[ 1.253310] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
[ 1.253942] rk_gmac-dwmac ff540000.ethernet: TX delay(0x26).
[ 1.254453] rk_gmac-dwmac ff540000.ethernet: RX delay(0x11).
[ 1.255007] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
[ 1.255615] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
[ 1.261169] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[ 1.262056] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 1.262714] rk_gmac-dwmac ff540000.ethernet: DWMAC1000
[ 1.263203] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported
[ 1.263867] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported
[ 1.264531] rk_gmac-dwmac ff540000.ethernet: COE Type 2
[ 1.264997] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported
[ 1.265620] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
[ 1.266194] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
[ 1.266720] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
[ 1.267249] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.267967] rk_gmac-dwmac ff540000.ethernet: device MAC address 0e:93:b6:96:ae:b8
[ 9.642300] Freeing initrd memory: 12952K
[ 9.700250] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 9.701175] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[ 9.707475] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator
[ 9.708332] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator
[ 9.723205] dwc2 ff580000.usb: DWC OTG Controller
[ 9.723687] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
[ 9.724355] dwc2 ff580000.usb: irq 27, io mem 0xff580000
[ 9.725134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 9.725877] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.726521] usb usb1: Product: DWC OTG Controller
[ 9.726942] usb usb1: Manufacturer: Linux 6.6.25-spring-plowing dwc2_hsotg
[ 9.727575] usb usb1: SerialNumber: ff580000.usb
[ 9.728872] hub 1-0:1.0: USB hub found
[ 9.729263] hub 1-0:1.0: 1 port detected
[ 9.732322] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 9.733232] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 9.734125] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000008002000010
[ 9.734501] ehci-platform ff5c0000.usb: EHCI Host Controller
[ 9.735216] xhci-hcd xhci-hcd.0.auto: irq 26, io mem 0xff600000
[ 9.735872] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 3
[ 9.736253] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 9.736867] ehci-platform ff5c0000.usb: irq 28, io mem 0xff5c0000
[ 9.737465] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[ 9.738401] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 9.739295] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 9.740033] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.740676] usb usb2: Product: xHCI Host Controller
[ 9.741112] usb usb2: Manufacturer: Linux 6.6.25-spring-plowing xhci-hcd
[ 9.741706] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 9.742916] hub 2-0:1.0: USB hub found
[ 9.743348] hub 2-0:1.0: 1 port detected
[ 9.744337] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 9.745265] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 9.746004] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.746649] usb usb4: Product: xHCI Host Controller
[ 9.747113] usb usb4: Manufacturer: Linux 6.6.25-spring-plowing xhci-hcd
[ 9.747712] usb usb4: SerialNumber: xhci-hcd.0.auto
[ 9.748920] hub 4-0:1.0: USB hub found
[ 9.749312] hub 4-0:1.0: 1 port detected
[ 9.750338] usbcore: registered new interface driver cdc_wdm
[ 9.750931] usbcore: registered new interface driver usb-storage
[ 9.751621] usbcore: registered new interface driver usbserial_generic
[ 9.752241] usbserial: USB Serial support registered for generic
[ 9.752818] usbcore: registered new interface driver ch341
[ 9.753343] usbserial: USB Serial support registered for ch341-uart
[ 9.753947] usbcore: registered new interface driver cp210x
[ 9.754480] usbserial: USB Serial support registered for cp210x
[ 9.755004] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[ 9.755469] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 9.755636] usbcore: registered new interface driver ftdi_sio
[ 9.756287] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.756832] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 9.757420] usb usb3: Product: EHCI Host Controller
[ 9.758202] usbcore: registered new interface driver garmin_gps
[ 9.758482] usb usb3: Manufacturer: Linux 6.6.25-spring-plowing ehci_hcd
[ 9.759056] usbserial: USB Serial support registered for Garmin GPS usb/tty
[ 9.759610] usb usb3: SerialNumber: ff5c0000.usb
[ 9.760255] usbcore: registered new interface driver ipw
[ 9.761118] usbserial: USB Serial support registered for IPWireless converter
[ 9.761471] hub 3-0:1.0: USB hub found
[ 9.761803] usbcore: registered new interface driver opticon
[ 9.762151] hub 3-0:1.0: 1 port detected
[ 9.762630] usbserial: USB Serial support registered for opticon
[ 9.763546] usbcore: registered new interface driver pl2303
[ 9.764080] usbserial: USB Serial support registered for pl2303
[ 9.764670] usbcore: registered new interface driver qcaux
[ 9.765201] usbserial: USB Serial support registered for qcaux
[ 9.765764] usbcore: registered new interface driver qcserial
[ 9.766312] usbserial: USB Serial support registered for Qualcomm USB modem
[ 9.767142] usbcore: registered new interface driver symbolserial
[ 9.767724] usbserial: USB Serial support registered for symbol
[ 9.769294] mousedev: PS/2 mouse device common for all mice
[ 9.771964] i2c_dev: i2c /dev entries driver
[ 9.774205] i2c 1-0018: Fixed dependency cycle(s) with /i2c@ff160000/rk805@18/regulators/DCDC_REG4
[ 9.783790] sdhci: Secure Digital Host Controller Interface driver
[ 9.784362] sdhci: Copyright(c) Pierre Ossman
[ 9.784751] Synopsys Designware Multimedia Card Interface Driver
[ 9.786329] sdhci-pltfm: SDHCI platform and OF driver helper
[ 9.789451] ledtrig-cpu: registered to indicate activity on CPUs
[ 9.792791] hid: raw HID events driver (C) Jiri Kosina
[ 9.793425] usbcore: registered new interface driver usbhid
[ 9.793926] usbhid: USB HID core driver
[ 9.797790] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 9.944025] Initializing XFRM netlink socket
[ 9.944623] NET: Registered PF_INET6 protocol family
[ 9.999225] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[ 10.025113] Segment Routing with IPv6
[ 10.025473] RPL Segment Routing with IPv6
[ 10.025908] In-situ OAM (IOAM) with IPv6
[ 10.026463] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 10.028872] NET: Registered PF_PACKET protocol family
[ 10.029362] NET: Registered PF_KEY protocol family
[ 10.030223] 8021q: 802.1Q VLAN Support v1.8
[ 10.050149] registered taskstats version 1
[ 10.050923] Loading compiled-in X.509 certificates
[ 10.060078] zswap: loaded using pool zstd/zbud
[ 10.080249] Key type .fscrypt registered
[ 10.080633] Key type fscrypt-provisioning registered
[ 10.083957] Btrfs loaded, zoned=no, fsverity=no
[ 10.170395] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26
[ 10.171187] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.171828] usb 2-1: Product: USB2.0 Hub
[ 10.172183] usb 2-1: Manufacturer: GenesysLogic
[ 10.219644] hub 2-1:1.0: USB hub found
[ 10.220371] hub 2-1:1.0: 4 ports detected
[ 10.295306] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 10.318569] usb 4-1: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.26
[ 10.319354] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.319992] usb 4-1: Product: USB3.1 Hub
[ 10.320347] usb 4-1: Manufacturer: GenesysLogic
[ 10.348164] hub 4-1:1.0: USB hub found
[ 10.348997] hub 4-1:1.0: 4 ports detected
[ 10.605846] alg: No test for 842 (842-scomp)
[ 10.606604] alg: No test for 842 (842-generic)
[ 12.222307] rockchip-drm display-subsystem: bound ff370000.vop (ops vop_component_ops)
[ 12.223175] dwhdmi-rockchip ff3c0000.hdmi: supply avdd-0v9 not found, using dummy regulator
[ 12.224173] dwhdmi-rockchip ff3c0000.hdmi: supply avdd-1v8 not found, using dummy regulator
[ 12.225325] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2)
[ 12.227726] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver
[ 12.229712] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops dw_hdmi_rockchip_ops)
[ 12.231984] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[ 12.232810] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 12.235912] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 12.241153] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 12.242907] clk: Disabling unused clocks
[ 12.243721] ALSA device list:
[ 12.244009] No soundcards found.
[ 12.244667] dw-apb-uart ff130000.serial: forbid DMA for kernel console
[ 12.250893] Freeing unused kernel memory: 6720K
[ 12.251519] Run /init as init process
Loading, please wait...
Starting systemd-udevd version 252.22-1~deb12u1

[ 13.480802] Registered IR keymap rc-cec
[ 13.481436] rc rc0: dw_hdmi as /devices/platform/ff3c0000.hdmi/rc/rc0
[ 13.482347] input: dw_hdmi as /devices/platform/ff3c0000.hdmi/rc/rc0/input1
[ 13.483874] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[ 13.485689] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 5
[ 13.487352] ohci-platform ff5d0000.usb: irq 38, io mem 0xff5d0000
[ 13.554953] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06
[ 13.555761] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.556416] usb usb5: Product: Generic Platform OHCI controller
[ 13.556948] usb usb5: Manufacturer: Linux 6.6.25-spring-plowing ohci_hcd
[ 13.557546] usb usb5: SerialNumber: ff5d0000.usb
[ 13.560099] hub 5-0:1.0: USB hub found
[ 13.560576] hub 5-0:1.0: 1 port detected
[ 17.741829] rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'hevc', val=0x88220
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... �[2J�[3J�[-1;-1fdone.

Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.

Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems

done.

Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

[ 23.523605] platform ff100000.syscon:io-domains: deferred probe pending
[ 23.524225] platform ff300000.gpu: deferred probe pending
[ 23.524711] platform cpufreq-dt: deferred probe pending
[ 23.525180] platform ff520000.mmc: deferred probe pending
Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

Begin: Running /scripts/local-block ... done.

done.

Gave up waiting for root file system device. Common problems:

• Boot args (cat /proc/cmdline)

  • Check rootdelay= (did the system wait long enough?)

• Missing modules (cat /proc/modules; ls /dev)

ALERT! UUID=aa6429e9-c7ae-47f0-8017-e2dad31d45d9 does not exist. Dropping to a shell!

BusyBox v1.35.0 (Debian 1:1.35.0-4+b3) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) �[6n

[ophub]

uuid没找到，重新下载6.1内核版本的刷机，可以使用armbian-update -k 6.6更新到6.6内核

[liyiranlab]

谢谢大佬，刚刚刷6.1的成功了，试了两个6.6都失败了。

[liyiranlab]

uuid没找到，重新下载6.1内核版本的刷机，可以使用armbian-update -k 6.6更新到6.6内核

我升级内核又死了

[liyiranlab]

我是自己编译带uas的内核

[ophub]

你试试我仓库的6.6能不能用
armbian-update -k 6.6

[liyiranlab]

你试试我仓库的6.6能不能用 armbian-update -k 6.6

不试了，刚刚搞了几个小时装了docker，omv，下次吧。

[ksi1110]

我刷完这个版本，直接黑屏无输出