rebuild后无法启动

[ghp3000]

Device Information | 设备信息

• SOC:S905L3
• Model: BesTV R3300L

Armbian Version | 系统版本

• Kernel Version: 6.6.47
• Release: bullseye

** 编译环境**
-Ubuntu 22.04.1 LTS
-kernel 6.8.0-40-generic

编译过程
cd ~
git clone https://github.com/ophub/amlogic-s9xxx-armbian.git
cd amlogic-s9xxx-armbian
git clone https://github.com/armbian/build.git
cd build
./compile.sh RELEASE=bullseye BOARD=odroidn2 BRANCH=current BUILD_MINIMAL=no
BUILD_ONLY=default HOST=armbian BUILD_DESKTOP=no EXPERT=yes KERNEL_CONFIGURE=no
COMPRESS_OUTPUTIMAGE="sha" SHARE_LOG=yes

cd ..
sudo ./rebuild -b s905l -k 6.6.47

写盘
用rufus将 ~/amlogic-s9xxx-armbian/build/output/images/Armbian_24.11.0_amlogic_s905l_bullseye_6.6.47_server_2024.08.22.img.gz写入到一张8G Micro SD

启动日志

Details

GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0; TE: 70187

BL2 Built : 01:56:32, Dec 22 2016.
gxl g1614c0b - xiaobo.gu@droid05

Board ID = 7, adc=562
set vcck to 1070 mv
set vddee to 1070 mv
CPU clk: 1200MHz
2layers board, use ddr_set[0]
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz - PASS
Rank0: 1024MB(auto)-2T-11
DataBus test pass!
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x00007400
Load bl301 from eMMC, src: 0x00018200, des: 0x01200000, size: 0x00002200
Load bl31 from eMMC, src: 0x0001c200, des: 0x10100000, size: 0x00019400
Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x00086400
NOTICE: BL3-1: v1.0(debug):959fdf0
NOTICE: BL3-1: Built : 15:01:44, Dec 29 2016
aml log : bl31 normal boot !
[Image: gxl_v1.1.3089-661026e 2017-01-10 18:34:56 qiufang.dai@droid07]
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: ef be ad de d f0 ad ba ef be ad de not ES chip
efuse init ops = c2
efuse init hdcp = c, cf9=7
[0.500996 Inits done]
INFsOe:c u r e BtLa3s-k1 :s tIanritt!ia
lizing runtihmieg hs etvices
WARNING: No OPTEE provided by BL2 boot loader
ERROR: Error initializing runtime service opteed_fast
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x1000000
INFO: BL3-1: Next image spsr = 0x3c9

U-Boot 2015.01-gd020ddf (Mar 09 2017 - 14:51:58)

DRAM: 1 GiB
Relocation Offset is: 36eec000
gpio: pin GPIODV_24 (gpio 43) value is 1
mwm 0xc8837004:[0x aa203] with [0x ea203] ok
mwm 0xc883700c:[0x 3e3b744] with [0x 3e3b764] ok
mwm 0xc8837010:[0x c0101] with [0x c8101] ok
mwm 0xc8837010:[0x c8101] with [0x 128101] ok
register usb cfg[0][1] = 0000000037f61028
[CANVAS]canvas init
vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
vpu: clk_level = 7
vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
vpp: vpp_init
MMC: aml_priv->desc_buf = 0x0000000033edcac0
aml_priv->desc_buf = 0x0000000033edede0
SDIO Port B: 0, SDIO Port C: 1
emmc/sd response timeout, cmd8, status=0x3ff2800
emmc/sd response timeout, cmd55, status=0x3ff2800
[mmc_init] mmc init success
mmc read lba=0x14000, blocks=0x400
Amlogic multi-dtb tool
Multi dtb detected
2layers board, board id use 7
Multi dtb tool version: v2 .
Support 6 dtbs.
aml_dt soc: gxl platform: p211 variant: 1g
dtb 0 soc: gxbb plat: p201 vari: 1g
dtb 1 soc: gxbb plat: p201 vari: 2g
dtb 2 soc: gxl plat: p211 vari: 1g
dtb 3 soc: gxl plat: p211 vari: 2g
dtb 4 soc: gxl plat: p215 vari: 1g
dtb 5 soc: gxl plat: p215 vari: 2g
Find match dtb: 2
start dts,buffer=0000000033ee1630,dt_addr=0000000033ef1e30
parts: 1
00: data ffffffffffffffff 4
get_dtb_struct: Get emmc dtb OK!
Partition table get from SPL is :
name offset size flag

0: bootloader 0 400000 0
1: reserved 2400000 4000000 0
2: cache 6c00000 0 0
3: env 7400000 800000 0
4: data 8400000 1c9c00000 4
mmc read lba=0x12000, blocks=0x2
mmc read lba=0x12002, blocks=0x2
mmc_read_partition_tbl: mmc read partition OK!
eMMC/TSD partition table have been checked OK!
mmc env offset: 0x7400000
In: serial
Out: serial
Err: serial
board id is : 7
hpd_state=0
cvbs performance type = 7, table = 1
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
read emmc dtb
Amlogic multi-dtb tool
Multi dtb detected
Multi dtb tool version: v2 .
Support 6 dtbs.
aml_dt soc: gxl platform: p211 variant: 1g
dtb 0 soc: gxbb plat: p201 vari: 1g
dtb 1 soc: gxbb plat: p201 vari: 2g
dtb 2 soc: gxl plat: p211 vari: 1g
dtb 3 soc: gxl plat: p211 vari: 2g
dtb 4 soc: gxl plat: p215 vari: 1g
dtb 5 soc: gxl plat: p215 vari: 2g
Find match dtb: 2
Net: dwmac.c9410000
wipe_data=successful
wipe_cache=successful
Can not find partition name "logo"
Cannot find dev.
amlmmc cmd failed

store - STORE sub-system

Usage:
store store init flag
store read name addr off|partition size
read 'size' bytes starting at offset 'off'
to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
write 'size' bytes starting at offset 'off'
to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
write uboot to the boot device
store erase boot/data:
erase the area which is uboot or data
store erase partition <partition_name>:
erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
scrub the area from offset and size
store dtb iread/read/write addr
read/write dtb, size is optional
store key read/write addr
read/write key, size is optional

cmd store failed
Err imgread(L333):Fail to read 0x2000B from part[logo] at offset 0
There is no valid bmp file at the given address
[CANVAS]addr=0x3d800000 width=3840, height=2160
There is no valid bmp file at the given address
upgrade_step=2
amlkey_init() enter!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
[KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet
rebootmode=cold_boot
Hit any key to stop autoboot: 0
card in
[mmc_init] mmc init success
Device: SDIO Port B
Manufacturer ID: 83
OEM: 4e43
Name: NCard
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 7.4 GiB
Bus Width: 4-bit
reading s905_autoscript
1351 bytes read in 3 ms (439.5 KiB/s)
Executing script at 01020000
start amlogic old u-boot
reading boot_android
** Unable to read file boot_android **
** Bad device usb 0 **
reading u-boot.ext
** Unable to read file u-boot.ext **
** Bad device usb 0 **
reading uEnv.txt
373 bytes read in 3 ms (121.1 KiB/s)
mac=8C:6D:50:62:E9:09
reading /zImage
47186432 bytes read in 2835 ms (15.9 MiB/s)
reading /uInitrd
13539288 bytes read in 814 ms (15.9 MiB/s)
reading /dtb/amlogic/meson-gxl-s905l3b-m302a.dtb
40136 bytes read in 11 ms (3.5 MiB/s)
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
[rsvmem] bl31 reserved memory set addr error.
Loading init Ramdisk from Legacy Image at 15000000 ...
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
Data Size: 13539224 Bytes = 12.9 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Amlogic multi-dtb tool
Single dtb detected
load dtb from 0x1000000 ......
Flattened Device Tree blob at 01000000
Booting using the fdt blob at 0x1000000
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
[rsvmem] bl31 reserved memory set addr error.
Loading Ramdisk to 331f0000, end 33ed9798 ... OK
Loading Device Tree to 000000001fff3000, end 000000001ffffcc7 ... OK
fdt_instaboot: get header err

Starting kernel ...

uboot time: 6019638 us
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.6.43-ophub (root@fv-az523-848) (aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 13.3.Rel1 (Build arm-13.24)) 13.3.1 20240614, GNU ld (Arm GNU Toolchain 13.3.Rel1 (Build arm-13.24)) 2.42.0.20240614) #1 SMP Sat Jul 27 09:39:04 EDT 2024
[ 0.000000] Machine model: Amlogic Meson GXL (S905L3b) MBH-M302A Box
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000023000000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000023000000..0x0000000032ffffff (262144 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x0000000000000000..0x0000000000ffffff (16384 KiB) nomap non-reusable hwrom@0
[ 0.000000] OF: reserved mem: 0x0000000005000000..0x00000000052fffff (3072 KiB) nomap non-reusable secmon@5000000
[ 0.000000] OF: reserved mem: 0x0000000005300000..0x00000000072fffff (32768 KiB) nomap non-reusable secmon@5300000
[ 0.000000] OF: reserved mem: 0x0000000010000000..0x00000000101fffff (2048 KiB) nomap non-reusable secmon@10000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x0000000037ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x0000000037ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000037ffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] percpu: Embedded 29 pages/cpu s80616 r8192 d29976 u118784
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: root=UUID=8490d97a-8fde-417f-9b66-b5dfb09f9e61 rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 max_loop=128 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=8C:6D:50:62:E9:09
[ 0.000000] Unknown kernel command line parameters "cgroup_enable=memory cgroup_memory=1 mac=8C:6D:50:62:E9:09", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 225792
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x000000001bff3000-0x000000001fff3000] (64MB)
[ 0.000000] Memory: 457868K/917504K available (18688K kernel code, 4032K rwdata, 16212K rodata, 6976K init, 924K bss, 197492K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000697] Console: colour dummy device 80x25
[ 0.000709] printk: console [tty0] enabled
[ 0.001107] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001128] pid_max: default: 32768 minimum: 301
[ 0.003200] LSM: initializing lsm=capability,selinux,integrity
[ 0.004833] SELinux: Initializing.
[ 0.009051] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.009072] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.012738] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.012955] rcu: Hierarchical SRCU implementation.
[ 0.012971] rcu: Max phase no-delay instances is 1000.
[ 0.014424] EFI services will not be available.
[ 0.014838] smp: Bringing up secondary CPUs ...
[ 0.015445] Detected VIPT I-cache on CPU1
[ 0.015549] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.016247] Detected VIPT I-cache on CPU2
[ 0.016343] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.017024] Detected VIPT I-cache on CPU3
[ 0.017119] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.017200] smp: Brought up 1 node, 4 CPUs
[ 0.017259] SMP: Total of 4 processors activated.
[ 0.017270] CPU features: detected: 32-bit EL0 Support
[ 0.017279] CPU features: detected: 32-bit EL1 Support
[ 0.017290] CPU features: detected: CRC32 instructions
[ 0.017367] CPU: All CPU(s) started at EL2
[ 0.017384] alternatives: applying system-wide alternatives
[ 0.019403] devtmpfs: initialized
[ 0.026345] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.026391] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.032848] prandom: seed boundary self test passed
[ 0.033543] prandom: 100 self tests passed
[ 0.033593] pinctrl core: initialized pinctrl subsystem
[ 0.034023] DMI not present or invalid.
[ 0.035025] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.035998] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.036370] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.036659] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.036768] audit: initializing netlink subsys (disabled)
[ 0.036999] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1
[ 0.038109] thermal_sys: Registered thermal governor 'step_wise'
[ 0.038186] cpuidle: using governor ladder
[ 0.038415] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.038526] ASID allocator initialised with 65536 entries
[ 0.038711] Serial: AMBA PL011 UART driver
[ 0.049249] platform d0100000.vpu: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
[ 0.049455] platform d0100000.vpu: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
[ 0.049523] platform c883a000.hdmi-tx: Fixed dependency cycle(s) with /soc/vpu@d0100000
[ 0.051979] platform d0100000.vpu: Fixed dependency cycle(s) with /cvbs-connector
[ 0.052077] platform cvbs-connector: Fixed dependency cycle(s) with /soc/vpu@d0100000
[ 0.052283] platform c883a000.hdmi-tx: Fixed dependency cycle(s) with /hdmi-connector
[ 0.052368] platform hdmi-connector: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
[ 0.053029] Modules: 21008 pages in range for non-PLT usage
[ 0.053036] Modules: 512528 pages in range for PLT usage
[ 0.054175] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.054213] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.054225] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.054235] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.054245] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.054255] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.054265] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.054275] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.055410] cryptd: max_cpu_qlen set to 1000
[ 0.124286] raid6: neonx8 gen() 2263 MB/s
[ 0.192339] raid6: neonx4 gen() 2229 MB/s
[ 0.260386] raid6: neonx2 gen() 2141 MB/s
[ 0.328444] raid6: neonx1 gen() 1832 MB/s
[ 0.396484] raid6: int64x8 gen() 1415 MB/s
[ 0.464533] raid6: int64x4 gen() 1573 MB/s
[ 0.532587] raid6: int64x2 gen() 1404 MB/s
[ 0.600643] raid6: int64x1 gen() 1035 MB/s
[ 0.600654] raid6: using algorithm neonx8 gen() 2263 MB/s
[ 0.668673] raid6: .... xor() 1655 MB/s, rmw enabled
[ 0.668684] raid6: using neon recovery algorithm
[ 0.668974] ACPI: Interpreter disabled.
[ 0.669785] iommu: Default domain type: Translated
[ 0.669812] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.670431] SCSI subsystem initialized
[ 0.670886] usbcore: registered new interface driver usbfs
[ 0.670930] usbcore: registered new interface driver hub
[ 0.670975] usbcore: registered new device driver usb
[ 0.671425] mc: Linux media interface: v0.10
[ 0.671477] videodev: Linux video capture interface: v2.00
[ 0.671553] pps_core: LinuxPPS API ver. 1 registered
[ 0.671564] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.671585] PTP clock support registered
[ 0.671738] EDAC MC: Ver: 3.0.0
[ 0.672340] scmi_core: SCMI protocol bus registered
[ 0.672815] Advanced Linux Sound Architecture Driver Initialized.
[ 0.673880] vgaarb: loaded
[ 0.674340] clocksource: Switched to clocksource arch_sys_counter
[ 0.677758] VFS: Disk quotas dquot_6.6.0
[ 0.677818] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.678064] FS-Cache: Loaded
[ 0.678428] pnp: PnP ACPI: disabled
[ 0.685667] NET: Registered PF_INET protocol family
[ 0.685838] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.687909] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.687954] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.687976] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.688081] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.688293] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.688734] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, linear)
[ 0.688893] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.688926] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.689149] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.689183] NET: Registered PF_XDP protocol family
[ 0.689206] PCI: CLS 0 bytes, default 64
[ 0.689447] Trying to unpack rootfs image as initramfs...
[ 0.694655] kvm [1]: IPA Size Limit: 40 bits
[ 0.697543] kvm [1]: vgic interrupt IRQ9
[ 0.697599] kvm [1]: Hyp mode initialized successfully
[ 0.700042] Initialise system trusted keyrings
[ 0.700302] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.700374] zbud: loaded
[ 0.703088] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.704557] fuse: init (API version 7.39)
[ 0.705370] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 0.744417] NET: Registered PF_ALG protocol family
[ 0.744514] xor: measuring software checksum speed
[ 0.748444] 8regs : 2524 MB/sec
[ 0.752370] 32regs : 2524 MB/sec
[ 0.756574] arm64_neon : 2355 MB/sec
[ 0.756594] xor: using function: 32regs (2524 MB/sec)
[ 0.756612] Key type asymmetric registered
[ 0.756623] Asymmetric key parser 'x509' registered
[ 0.756741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241)
[ 0.756972] io scheduler mq-deadline registered
[ 0.756988] io scheduler kyber registered
[ 0.757167] io scheduler bfq registered
[ 0.799546] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.818568] soc soc0: Amlogic Meson GXL (S905L) Revision 21:c (c2:2) Detected
[ 0.820778] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 0.823579] Serial: AMBA driver
[ 0.824248] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 14, base_baud = 1500000) is a meson_uart
[ 0.824305] printk: console [ttyAML0] enabled
[ 1.954939] random: crng init done
[ 1.965054] brd: module loaded
[ 2.029499] loop: module loaded
[ 2.036153] usbcore: registered new interface driver cdc_wdm
[ 2.036229] usbcore: registered new interface driver usb-storage
[ 2.042289] usbcore: registered new interface driver usbserial_generic
[ 2.048678] usbserial: USB Serial support registered for generic
[ 2.054627] usbcore: registered new interface driver ch341
[ 2.060069] usbserial: USB Serial support registered for ch341-uart
[ 2.066286] usbcore: registered new interface driver cp210x
[ 2.071785] usbserial: USB Serial support registered for cp210x
[ 2.077644] usbcore: registered new interface driver ftdi_sio
[ 2.083339] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2.090601] usbcore: registered new interface driver garmin_gps
[ 2.096466] usbserial: USB Serial support registered for Garmin GPS usb/tty
[ 2.103361] usbcore: registered new interface driver ipw
[ 2.108629] usbserial: USB Serial support registered for IPWireless converter
[ 2.115694] usbcore: registered new interface driver opticon
[ 2.121295] usbserial: USB Serial support registered for opticon
[ 2.127251] usbcore: registered new interface driver pl2303
[ 2.132769] usbserial: USB Serial support registered for pl2303
[ 2.138637] usbcore: registered new interface driver qcaux
[ 2.144069] usbserial: USB Serial support registered for qcaux
[ 2.149853] usbcore: registered new interface driver qcserial
[ 2.155564] usbserial: USB Serial support registered for Qualcomm USB modem
[ 2.162454] usbcore: registered new interface driver symbolserial
[ 2.168480] usbserial: USB Serial support registered for symbol
[ 2.174358] usbcore: registered new device driver onboard-usb-hub
[ 2.181624] mousedev: PS/2 mouse device common for all mice
[ 2.187657] meson-vrtc c81000a8.rtc: registered as rtc0
[ 2.191049] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2)
[ 2.199569] i2c_dev: i2c /dev entries driver
[ 2.205183] Registered IR keymap rc-cec
[ 2.207204] rc rc0: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0
[ 2.215466] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0/input0
[ 2.227281] sdhci: Secure Digital Host Controller Interface driver
[ 2.230083] sdhci: Copyright(c) Pierre Ossman
[ 2.234413] Synopsys Designware Multimedia Card Interface Driver
[ 2.241318] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.241789] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 2.242721] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 2.256500] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.263908] meson-sm: secure-monitor enabled
[ 2.267937] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 2.274430] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 2.282406] hid: raw HID events driver (C) Jiri Kosina
[ 2.287141] usbcore: registered new interface driver usbhid
[ 2.292558] usbhid: USB HID core driver
[ 2.297156] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[ 2.307347] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[BL31]: tee size: 0
[ 2.314298] Driver 'optee' was unable to register with bus_type 'arm_ffa' because the bus was not initialized.
[ 2.324860] mmc1: new high speed SDHC card at address 59b4
[ 2.329274] mmcblk1: mmc1:59b4 NCard 7.41 GiB
[ 2.334562] mmcblk1: p1 p2
[ 2.401072] Initializing XFRM netlink socket
[ 2.401233] NET: Registered PF_INET6 protocol family
[ 2.433505] mmc2: mmc_select_hs200 failed, error -74
[ 2.434936] mmc2: new DDR MMC card at address 0001
[ 2.438406] mmcblk2: mmc2:0001 008G70 7.28 GiB
[ 2.444722] mmcblk2boot0: mmc2:0001 008G70 4.00 MiB
[ 2.448119] mmcblk2boot1: mmc2:0001 008G70 4.00 MiB
[ 2.452848] mmcblk2rpmb: mmc2:0001 008G70 4.00 MiB, chardev (236:0)
[ 4.881904] Freeing initrd memory: 13220K
[ 4.924531] Segment Routing with IPv6
[ 4.924579] RPL Segment Routing with IPv6
[ 4.926628] In-situ OAM (IOAM) with IPv6
[ 4.930591] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 4.937326] NET: Registered PF_PACKET protocol family
[ 4.941351] NET: Registered PF_KEY protocol family
[ 4.946219] 8021q: 802.1Q VLAN Support v1.8
[ 4.958932] registered taskstats version 1
[ 4.959216] Loading compiled-in X.509 certificates
[ 4.966576] zswap: loaded using pool zstd/zbud
[ 4.976505] Key type .fscrypt registered
[ 4.976554] Key type fscrypt-provisioning registered
[ 4.981091] Btrfs loaded, zoned=no, fsverity=no
[ 5.241112] alg: No test for 842 (842-scomp)
[ 5.241267] alg: No test for 842 (842-generic)
[ 5.253659] "cryptomgr_test" (212) uses obsolete ecb(arc4) skcipher
[ 6.168616] meson-drm d0100000.vpu: Queued 2 outputs on vpu
[ 6.198404] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 6.203225] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 6.211026] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
[ 6.218586] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
[ 6.263267] Console: switching to colour frame buffer device 90x36
[ 6.283889] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 6.291982] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 6.297838] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 6.303909] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 6.310424] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 6.316683] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 6.321857] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 6.329256] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 6.336673] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 6.341853] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 6.348834] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 6.355219] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 6.361085] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 6.366861] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 6.377108] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
[ 6.379969] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 6.911313] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 6.914573] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 6.921798] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 6.930205] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 6.934154] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
[ 6.941636] xhci-hcd xhci-hcd.3.auto: USB3 root hub has no ports
[ 6.947432] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000008002000010
[ 6.956783] xhci-hcd xhci-hcd.3.auto: irq 32, io mem 0xc9000000
[ 6.962914] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 6.970818] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.977971] usb usb1: Product: xHCI Host Controller
[ 6.982796] usb usb1: Manufacturer: Linux 6.6.43-ophub xhci-hcd
[ 6.988656] usb usb1: SerialNumber: xhci-hcd.3.auto
[ 6.994013] hub 1-0:1.0: USB hub found
[ 6.997221] hub 1-0:1.0: 2 ports detected
[ 7.004800] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
[ 7.005452] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
get_d[ 7.025556] clk: Disabling unused clocks
[ 7.027369] ALSA device list:
[ 7.028880] No soundcards found.
[ 7.041104] Freeing unused kernel memory: 6976K
[ 7.042778] Run /init as init process
[ 7.061698] mmc0: new high speed SDIO card at address 0001
[ 7.780586] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
[ 7.792435] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
[ 7.795709] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
[ 7.801411] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
[ 7.809295] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
[ 7.821315] lima d00c0000.gpu: bus rate = 166666667
[ 7.823117] lima d00c0000.gpu: mod rate = 24000000
[ 7.827227] lima d00c0000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found
[ 7.837161] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Begin: Will now check root file system ... fsck from util-linux 2.38.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk1p2] fsck.ext4 -y -C0 /dev/mmcblk1p2
e2fsck 1.47.0 (5-Feb-2023)
ROOTFS: recovering journal
Superblock needs_recovery flag is clear, but journal has data.
Run journal anyway? yes

fsck.ext4: unable to set superblock flags on ROOTFS
ROOTFS: ********** WARNING: Filesystem still has errors **********
fsck exited with status code 12
done.
Failure: File system check of the root filesystem failed
The root filesystem on /dev/mmcblk1p2 requires a manual fsck

[ophub]

这个盒子需要先换个安卓系统，你从首页的设备列表点进去看看

[ghp3000]

盒子线刷了合适的安卓系统.
目前问题已解决,是sd卡坏掉了,无法写入,能读取.
so.启动报错是之前sd卡内的文件污染的.
后来换了u盘,能正常启动.