-
Notifications
You must be signed in to change notification settings - Fork 1.9k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
H96 max x3 kernel panic and not work wifi/ethernet #850
Comments
jl2101 is support. |
I re-downloaded the image to SD and replaced in two lines in meson-sm1-h96-max-x3.dtb see screenshot. After that, ethernet was able to get an IP from dhcp. Wi-Fi still does not work, it sees access points, but does not connect to them. Saw this while uploading: Reboot also causes kernel panic |
You submit the changes to the upstream kernel source code, so that you can use the correct configuration in the future. |
>>What chip is your wifi. |
I see that there is support for your wifi in the source code. Kernel panics are individual kernels, right? You can test 5.4/5.10/5.15/6.0. Submit your changes to the upstream kernel source code, and submit all 4 kernel repositories. |
>>I see that there is support for your wifi in the source code. >>You can test 5.4/5.10/5.15/6.0. >>Submit your changes to the upstream kernel source code, and submit all 4 kernel repositories. |
meson-sm1-h96-max-x3-oc.dtb.zip Download, decompress into dtb, overwrite the file with the same name in the /boot/dtb/amlogic directory, restart the test to see if it can start normally, and whether the wired network is normal. |
not work, only black screen. Should I replace the boot.sd and boot.usb files? |
Yes, but with this file it doesn't boot |
try this is 5.15.85 kernel dtb |
I tried updating the kernel to 5.15.85 and used this file. ethrnet works, wifi still can't connect to access point. After reboot also kernel panic. Maybe some logs are needed to understand what could be the problem? |
Update to 5.10/5.4 kernel, and upload this file, try other kernels to see if it works. |
armbian-update -k 5.4.228 You update this kernel. When I submitted the dts modification just now, I found that this was correct before. Try this to see if there is a kernel panic. |
Yes, I checked, there is no kernel panic on this kernel. At least it has rebooted several times. |
Wired network is normal, use wired |
Bluetooth also finds devices but does not connect to them. There is no ethernet where I want to use it, only WiFi is possible. After installing BT in armbian-config, it stopped rebooting, after turning off the power it loads normally. Now I deleted BT and everything is fine again. Possibly the wrong driver? |
You mean bluetooth is not working but wireless is working? |
Unable to connect to wireless network in |
dmesg|grep brcm |
|
From the log, your wireless and bluetooth are normally driven |
Ok, your tweak feedback has been submitted to the kernel repository |
can u show ur box's cpufreq-info here? |
|
Tested for several days. After a while, I tried to reboot the device and got the kernel panic again. Now additionally disabled frequencies higher than the maximum specified in the processor specification. I've been testing for a day and have never received a kernel panic yet.
|
ubuntu 18是哪个版本支持的,请问历史版本去哪里下载 |
Standard chat template, no routine, no chat.
标准聊天模板,无套路不聊天。
Device Information | 设备信息
Armbian Version | 系统版本
Kernel Version: [5.15.84]
Release: [jammy]
Describe the bug | 问题描述
Describe the problem in detail and attach screenshots if necessary.
详细描述问题,并在必要时附上屏幕截图。
The first download is good, but WiFi does not work, Ethernet does not receive the DHCP address. After rebooting, I get Kernel Panic and no longer loads. See Screen. I use boot-u-boot-x96maxplus.bin and dtb-meson-sm1-h96-max-x3.dtb
Armbian_23.02.0_amlogic_s905x3_jammy_5.15.84_server_2022.12.21.img.gz
The text was updated successfully, but these errors were encountered: