radio

#!/usr/bin/env bash
#
# Tim Osburn
# 220825
#
# This requires installation of the octl tool below
# - https://github.com/janten/onkyo-eiscp-remote-mac
# My personal setup: TX-8270 192.168.0.24:60128
#

RADIO=192.168.0.24
RPORT=60128

if [ $# -eq 0 ]
  then
    echo "Usage: `basename "$0"` command"
fi

# -------------------------------------------------------------

# Turn Radio off
if [ "$1" == "off" ]
  then
    octl PWR00 ${RADIO} ${RPORT} > /dev/null &
fi

# Turn radio off
if [ "$1" == "on" ]
  then
    octl PWR01 ${RADIO} ${RPORT} > /dev/null &
fi

# -------------------------------------------------------------

# Toggle on/off A Speaker output
if [ "$1" == "a" ]
  then
    octl SPAUP ${RADIO} ${RPORT} > /dev/null &
fi

# Toggle on/off B Speaker output
if [ "$1" == "b" ]
  then
    octl SPBUP ${RADIO} ${RPORT} > /dev/null &
fi


# Switch the radio to PC input mode
# Sets a plethora of items, need to add sleep as sending commands to the radio API too fast it get lost
# Input Selector Command: PC Input (05)
# Tone Front Bass: +10 (A hex)
# Tone Front Treble: +10 (A hex)
# Master Volumn: 60 (78 hex)
# Display Dimmer: Dim (01)
# Listening Mode Command: Stereo (00)
# Sleep: off
# Speaker A: On
# Speaker B: On
# SubVolumn: 0db
if [ "$1" == "pc" ]
  then
    octl SLI05 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl TFRB+A ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl TFRT+A ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl MVL78 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl DIM01 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl LMD00 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SLPOFF ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SPA01 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SPB01 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SWL+00 ${RADIO} ${RPORT} > /dev/null &

fi

# Switch the radio to PC input mode
# Sets a plethora of items, need to add sleep as sending commands to the radio API too fast it get lost
# Input Selector Command: PC Input (05)
# Tone Front Bass: +10 (A hex)
# Tone Front Treble: +10 (A hex)
# Master Volumn: 32 (40 hex)
# Display Dimmer: Dim (01)
# Listening Mode Command: Stereo (00)
# Sleep: off
# Speaker A: On
# Speaker B: On
# SubVolumn: 0db
if [ "$1" == "pcv" ]
  then
    octl SLI05 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl TFRB+A ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl TFRT+A ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl MVL40 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl DIM01 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl LMD00 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SLPOFF ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SPA01 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SPB01 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SWL+00 ${RADIO} ${RPORT} > /dev/null &

fi

# Switch the radio to Tuner mode
if [ "$1" == "tuner" ]
  then
    octl SLI26 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl TFRB+A ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl TFRT+A ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl MVL40 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SPA01 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SPB01 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SWL+00 ${RADIO} ${RPORT} > /dev/null &
fi

# Switch the radio to network mode
if [ "$1" == "net" ]
  then
    octl SLI2b ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl TFRB+A ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl TFRT+A ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl MVL40 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SPA01 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SPB01 ${RADIO} ${RPORT} > /dev/null &
    sleep 0.1
    octl SWL+00 ${RADIO} ${RPORT} > /dev/null &
fi

# Turn on Music Optimizer
if [ "$1" == "opton" ]
  then
    octl MOT01 ${RADIO} ${RPORT} > /dev/null &
fi

# Turn off Music Optimizer
if [ "$1" == "optoff" ]
  then
    octl MOT00 ${RADIO} ${RPORT} > /dev/null &
fi

# Music Optimizer toggle on/off
if [ "$1" == "opt" ]
  then
    octl MOTUP ${RADIO} ${RPORT} > /dev/null &
fi

# -------------------------------------------------------------

# Mute audio (toggle) wrap around (if on then off, if off then on)
if [ "$1" == "m" ]
  then
    octl AMTTG ${RADIO} ${RPORT} > /dev/null &
fi

# Mute Audio
if [ "$1" == "mute" ]
  then
    octl AMT01 ${RADIO} ${RPORT} > /dev/null &
fi

# Unmute Audio
if [ "$1" == "unmute" ]
  then
    octl AMT00 ${RADIO} ${RPORT} > /dev/null &
fi

# Sub Volumn level (convert to hex)
# radio sv - 15
# radio sv + 12
if [ "$1" == "sv" ]
  then
    DEC=$(echo "obase=10; ${3}*2" | bc)
    HEX=$(printf '%02x\n' ${DEC})
    octl SWL${2}${HEX} ${RADIO} ${RPORT} > /dev/null &
fi

# Speaker Volumn
if [ "$1" == "v" ]
  then
    DEC=$(echo "obase=10; ${2}*2" | bc)
    HEX=$(printf '%02x\n' ${DEC})
    octl MVL${HEX} ${RADIO} ${RPORT} > /dev/null &
fi

# Set Speaker Volumn to 00
if [ "$1" == "v00" ]
  then
    octl MVL00 ${RADIO} ${RPORT} > /dev/null &
fi

# Set Speaker Volumn to 10
if [ "$1" == "v10" ]
  then
    octl MVL14 ${RADIO} ${RPORT} > /dev/null &
fi

# Set Speaker Volumn to 20
if [ "$1" == "v20" ]
  then
    octl MVL28 ${RADIO} ${RPORT} > /dev/null &
fi

# Set Speaker Volumn to 30
if [ "$1" == "v30" ]
  then
    octl MVL3c ${RADIO} ${RPORT} > /dev/null &
fi

# Set Speaker Volumn to 40
if [ "$1" == "v40" ]
  then
    octl MVL50 ${RADIO} ${RPORT} > /dev/null &
fi

# Set Speaker Volumn to 50
if [ "$1" == "v50" ]
  then
    octl MVL64 ${RADIO} ${RPORT} > /dev/null &
fi

# Set Speaker Volumn to 60
if [ "$1" == "v60" ]
  then
    octl MVL78 ${RADIO} ${RPORT} > /dev/null &
fi

# Set Speaker Volumn to 70
if [ "$1" == "v70" ]
  then
    octl MVL8c ${RADIO} ${RPORT} > /dev/null &
fi

# Set Speaker Volumn to 80
if [ "$1" == "v80" ]
  then
    octl MVLa0 ${RADIO} ${RPORT} > /dev/null &
fi

# Set Speaker Volumn to 90
if [ "$1" == "max" ]
  then
    octl MVLb4 ${RADIO} ${RPORT} > /dev/null &
fi

# -------------------------------------------------------------

# Increase volumn by 1
if [ "$1" == "up" ]
  then
    for ((i=1;i<=${2};i++))
      do
        octl MVLUP1 ${RADIO} ${RPORT} > /dev/null &
        sleep 0.08
      done
fi

# Decrease volumn by 1
if [ "$1" == "down" ]
  then
    for ((i=1;i<=${2};i++))
      do
        octl MVLDOWN1 ${RADIO} ${RPORT} > /dev/null &
        sleep 0.08
      done
fi

# -------------------------------------------------------------


# manual tuning
# radio tun 10150 = FM 101.50
# radio tun 01000 = AM 1000

# change to tuner mode
if [ "$1" == "tun" ]
  then
    octl TUN${2} ${RADIO} ${RPORT} > /dev/null &
fi


# -------------------------------------------------------------

# Some local presets I put into the channel memory slots
if [ "$1" == "list" ]
  then
    printf '\033[8;42;130t';stty rows 42 cols 130

    echo "1  = 89.5 knhc"
    echo "2  = 92.5 kqmv"
    echo "3  = 93.3 kjr"
    echo "4  = 94.1 kswd"
    echo "5  = 95.7 kjeb"
    echo "6  = 96.1 kxxo"
    echo "7  = 96.5 kjaq"
    echo "8  = 97.3 kiro"
    echo "9  = 98.9 knuc"
    echo "10 = 99.9 kisw"
    echo "11 = 100.7 kkwf"
    echo "12 = 101.5 kplz"
    echo "13 = 102.5 kzok"
    echo "14 = 103.7 khtp"
    echo "15 = 104.5 klsw"
    echo "16 = 105.3 kcms"
    echo "17 = 106.1 kbks"
    echo "18 = 106.9 krwm"
    echo "19 = 107.7 kndd"
    echo "20 ="
    echo "21 ="
    echo "22 ="
    echo "23 ="
    echo "24 ="
    echo "25 ="
    echo "26 ="
    echo "27 ="
    echo "28 = 570 kvi"
    echo "29 = 710 kiroam"
    echo "30 = 770 ktth"
    echo "31 = 850 khho"
    echo "32 = 1000 knwn"
    echo "33 = 1090 kptr"
    echo "34 = 1150 kknw"
    echo "35 = 1190 1190"
    echo "36 = 1210 kmia"
    echo "37 = 1300 kkol"
    echo "38 = 1330 1330"
    echo "39 = 1540 kxpa"
    echo "40 = 1590 klfe"
  fi

# -------------------------------------------------------------

# Recall preset memory selections

if [ "$1" == "knhc" ]
  then
    octl PRS01 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kqmv" ]
  then
    octl PRS02 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kjr" ]
  then
    octl PRS03 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kswd" ]
  then
    octl PRS04 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kjeb" ]
  then
    octl PRS05 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kxxo" ]
  then
    octl PRS06 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kjaq" ]
  then
    octl PRS07 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kiro" ]
  then
    octl PRS08 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "knuc" ]
  then
    octl PRS09 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kisw" ]
  then
    octl PRS0A ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kkwf" ]
  then
    octl PRS0B ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kplz" ]
  then
    octl PRS0C ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kzok" ]
  then
    octl PRS0D ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "khtp" ]
  then
    octl PRS0E ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "klsw" ]
  then
    octl PRS0F ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kcms" ]
  then
    octl PRS10 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kbks" ]
  then
    octl PRS11 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "krwm" ]
  then
    octl PRS12 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kndd" ]
  then
    octl PRS13 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "XXXX" ]
  then
    octl PRS14 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "XXXX" ]
  then
    octl PRS15 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "XXXX" ]
  then
    octl PRS16 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "XXXX" ]
  then
    octl PRS17 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "XXXX" ]
  then
    octl PRS18 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "XXXX" ]
  then
    octl PRS19 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "XXXX" ]
  then
    octl PRS1A ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "XXXX" ]
  then
    octl PRS1B ${RADIO} ${RPORT} > /dev/null &
  fi

# AM 28 570
if [ "$1" == "kvi" ]
  then
    octl PRS1C ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kiroam" ]
  then
    octl PRS1D ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "ktth" ]
  then
    octl PRS1E ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "khho" ]
  then
    octl PRS1F ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "knwn" ]
  then
    octl PRS20 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kptr" ]
  then
    octl PRS21 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kknw" ]
  then
    octl PRS22 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "1190" ]
  then
    octl PRS23 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kmia" ]
  then
    octl PRS24 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kkol" ]
  then
    octl PRS25 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "1330" ]
  then
    octl PRS26 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "kxpa" ]
  then
    octl PRS27 ${RADIO} ${RPORT} > /dev/null &
  fi

if [ "$1" == "klfe" ]
  then
    octl PRS28 ${RADIO} ${RPORT} > /dev/null &
  fi