-
Notifications
You must be signed in to change notification settings - Fork 159
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
DW1820A Bluetooth does not work properly in some circumstances #125
Comments
I used to have this problem before I switched over to apples airport card From DW1830A. No matter I was on cold boot or warm boot, sometimes I will see devices in the Bluetooth panel but neither of them I can connect to. |
Yes, I have the same problem with my dw-1820a(CN-08PKF4)...sometimes it works, but sometimes, you can see the device but can not connect. osx-10.15.1, hacmini 2.4 |
I have tried as you told, and it works! |
@catalina86 |
@ivmm |
I grew up removing all Bluetooth devices and restarting the system after turning off Bluetooth. I still can't connect to the device. |
@ivmm Maybe there are some differences between different cards. You can follow the README of the
You can change the delay time as the instruction said and try again. Wish you good luck. |
@dickding You are right, you can connect to Wi-Fi normally using native thunderbolt, thank you! |
Maybe there is some bug in BrcmPatch v2.5 itself? We'd better wait and see. Some none-nuc D1820A users are reporting [mixed results].(https://www.insanelymac.com/forum/topic/339175-brcmpatchram2-for-1015-catalina-broadcom-bluetooth-firmware-upload/?page=11) For me, I have some issue with the patch v2.5 on a dell hackintosh laptop under 10.14.6, but it works flawlessly with RehabMan's original patch (which is not working for 10.15) |
@ivmm I also had the same issue but adding
|
I am also seeing the same issue with my DW1820A (part# CN-096JNT) where devices show up but will not connect. My issue appears to be the same as what this user mentions (https://www.tonymacx86.com/threads/the-solution-dell-dw1820a-broadcom-bcm94350zae-macos-15.288026/post-2042843) but I don't have Linux or Windows installed to dual boot into) My boot-args are Here is the log from last boot.
Right now I see the Bluetooth menu and sometimes things show up, but I cannot connect to anything. Here is what it looks like in System Profiler
|
Does anyone know how to fix the issue of not being able to connect to detected devices? |
It happens sometimes. Usually what I’m doing is perform a cold restart. Maybe you can check this out as well. |
I've reported this over at InsanelyMac (https://www.insanelymac.com/forum/topic/339175-brcmpatchram2-for-1015-catalina-broadcom-bluetooth-firmware-upload/?do=findComment&comment=2700139) |
@chrisallen The most reliable The reason may be related to firmware upload in those kexts (although hackintools says fw loaded) |
I had the same issue before, but a cache rebuild fixed it. |
May you tell more specifically about how to rebuild the cache? |
it was to rebuild the system and kext caches, I used KCPM Utility Pro to do that. |
While WiFi has been working perfectly, Bluetooth is sporadic and very frustrating. I have tried all the suggestions (that I could apply) both here and on other threads but I always end up in the same predicament ie I can see the keyboard and mouse, I can click connect on both of them but they simply will not connect. I remove power for 24 hours and sometimes I can reconnect but eventually they simply disconnect again. My solution was to deselect the DW1820A in HaC Mini Installer, reboot and in insert my old original IOGear Bluetooth USB dongle. All my Bluetooth devices now behave as they should and surprisingly the DW1820A WiFi works OK without being selected in the installer. |
Warning! While Handoff and other features are working as they should, unlocking using my Apple Watch does not work and further investigation tells me that Bluetooth 4.2 is required for this feature. (IOGear is only 4.0) |
You won’t get a flawless unlocking experience until you use an Apple airport card. Apple Airport card is the only that automatically keeps connections to accessories. Using a third party Bluetooth will give you unlock only once you’ve got it setup. |
@osy86 Every time bluetooth works if the firmware upgrade is not needed. working case:
not working case:
sudo kextcache -i / BTW, is there a way to bypass firmware loading? |
Firmware must be loaded for 3rd party Bluetooth card, as windows driver also loads a firmware. Sometimes a reboot from windows can make bluetooth work because the firmware has already updated by windows driver. Checkout Brcmpatch manual for further information. |
I have only Hackintosh in the box, no windows or other system at all, single SSD with only MacOS v10.15.2 on it. No USB stick plugged in. I guess the default firmware in the chipset is the same as what the patch are trying to load. |
The firmware is not in the chipset but in the Wi-Fi card itself. it has a Bluetooth firmware that needs to be updated every time it cold boots or it won’t work. Maybe it’s a bug related to brcmpatch. but when I was using a 3rd party card, a reboot might fix the problem. |
@osy86 Just tried release version 2.6, cache rebuild can't make bluetooth connection working, so I can do nothing but re-install v2.5 to restore bluetooth back. |
The brcm kexts were updated. If there’s an issue there I can’t do much to help. |
Understand, can you provide source of the brcm kexts so that I can report the issue I met? |
I have the same problem with you when I install the DW1820A Card into the slot after my installation,that's why the problem accourd, tried several ways to solve that as using all the mothod above. |
Describe the bug
The NUC8i7HVK has a network card for the 1820A (CN-08PKF4). EFI uses the 2.4.0 version and opens the 1820A support option. BIOS already disable ASPM.
Wifi can be driven directly, but there is a problem with Bluetooth, you can display Bluetooth, but you can't connect any devices.
Expected behavior
Successfully running Bluetooth.
Configuration
) VULCAN SO-DIMM DDR4 GAMING LAPTOP MEMORY 2666Mhz 16GB
) VULCAN SO-DIMM DDR4 GAMING LAPTOP MEMORY 2666Mhz 16GB
Modifications
None
Panic log
None
The text was updated successfully, but these errors were encountered: