Skip to content

Latest commit

 

History

History
108 lines (90 loc) · 4.8 KB

README.md

File metadata and controls

108 lines (90 loc) · 4.8 KB
Raw

P4Runtime

You can find the P4Runtime specification on p4.org.

Tentative gNMI support with sysrepo

We are working on supporting gNMI and OpenConfig YANG models as part of the P4 Runtime server. We are using sysrepo as our YANG configuration data store and operational state manager. If you want to experiment with the gNMI support, you will need to install sysrepo and its dependencies. We currently require version 0.7.5 of sysrepo, which depends on version 0.16-r1 of libyang.

Please make sure you install all the dependencies for libyang and sysrepo. If you are using a Debian system, we recommend that you install the following packages:

build-essential cmake libpcre3-dev libavl-dev libev-dev libprotobuf-c-dev protobuf-c-compiler

Then install libyang:

git clone --depth=1 -b v0.16-r1 https://github.com/CESNET/libyang.git
cd libyang
mkdir build
cd build
cmake ..
make
[sudo] make install

Finally, install sysrepo

git clone --depth=1 -b v0.7.5 https://github.com/sysrepo/sysrepo.git
cd sysrepo
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release -DBUILD_EXAMPLES=Off -DCALL_TARGET_BINS_DIRECTLY=Off ..
make
[sudo] make install

You can now start the sysrepo daemon (sudo sysrepod -d to start in debug mode).

In order to experiment with gNMI support, you also need to make sure to use --with-sysrepo when running configure for this project.

After installing sysrepo and building this project, the final step is to load the appropriate YANG models into sysrepo. Note that for now we are only looking to support a very small subset of openconfig-interfaces. We provide a script that you can run to load the YANG models: sudo sysrepo/install_yangs.sh. You can check that the YANG models were installed properly with sysrepoctl -l. The output should look like this:

Sysrepo schema directory: /etc/sysrepo/yang/
Sysrepo data directory:   /etc/sysrepo/data/
(Do not alter contents of these directories manually)

Module Name                   | Revision   | Conformance | Data Owner          | Permissions | Submodules                    | Enabled Features
-----------------------------------------------------------------------------------------------------------------------------------------------
openconfig-interfaces         | 2017-07-14 | Installed   | root:root           | 666         |                               |
ietf-interfaces               | 2014-05-08 | Imported    |                     |             |                               |
openconfig-yang-types         | 2017-07-30 | Imported    |                     |             |                               |
openconfig-extensions         | 2017-04-11 | Imported    |                     |             |                               |
openconfig-types              | 2017-08-16 | Imported    |                     |             |                               |
openconfig-platform           | 2016-12-22 | Installed   | root:root           | 666         |                               |
openconfig-platform-types     | 2017-08-16 | Imported    |                     |             |                               |
iana-if-type                  | 2014-05-08 | Installed   |                     |             |                               |
ietf-netconf-notifications    | 2012-02-06 | Installed   | root:root           | 666         |                               |
ietf-netconf                  | 2011-06-01 | Imported    |                     |             |                               |
ietf-netconf-acm              | 2012-02-22 | Imported    |                     |             |                               |

The P4 Runtime server library that you get after that will be able to support the following gNMI operations:

  • Subscribe in ONCE and STREAM mode
  • Get and Set on leaves only

Here is an example of a supported ONCE subscription request from a Python client:

channel = grpc.insecure_channel(<SERVER_ADDR>)
stub = gnmi_pb2_grpc.gNMIStub(channel)

def req_iterator():
    while True:
        req = gnmi_pb2.SubscribeRequest()
        subList = req.subscribe
        subList.mode = gnmi_pb2.SubscriptionList.ONCE
        sub = subList.subscription.add()
        path = sub.path
        for name in ["interfaces", "interface", "..."]:
            e = path.elem.add()
            e.name = name
        print "***************************"
        print "REQUEST"
        print req
        print "***************************"
        yield req
        return

for response in stub.Subscribe(req_iterator()):
    print "***************************"
    print "RESPONSE"
    print response
    print "***************************"