Home assistant Custom Component for reading data from Solaredge inverter through modbus TCP. Implements Inverter registers from https://www.solaredge.com/sites/default/files/sunspec-implementation-technical-note.pdf
Copy contents of custom_components folder to your home-assistant config/custom_components folder or install through HACS. After reboot of Home-Assistant, this integration can be configured through the integration setup UI
Enable wifi direct on the inverter. Connect to the inverter access point like you would for a normal wifi network. The wifi password is published at the right side of the inverter. Then open up a browser and go to http://172.16.0.1 . From this webpage you can enable modbus TCP without setApp or installer account.