NO NETWORK

[VenimK]

DIGIBIT R1

WHEN booting stock firmware no network (and device gets in a loop)
WHEN booting with usb and idl4k.recovery device boots stock firmware OK

When booting with USB and using satip.exe.fwxxx NO NETWORK
Knight Rider Effect OK

What's going ON ???

[Jalle19]

Sounds like something is wrong with your network, or maybe you're expecting it to get a specific IP address but it's getting some other address?

[VenimK]

All ready try 'd static IP and DHCP ON stock firmware as well ...

[Jalle19]

Well, if you can't get the stock firmware to work then I don't think you'll get any custom firmware working either.

[VenimK]

Well, if you can't get the stock firmware to work then I don't think you'll get any custom firmware working either.

It boot in stock firmware, when I use idl4k.recovery on the USB ????

[Jalle19]

You can try my builds instead from here: https://github.com/Jalle19/satip-axe/releases/tag/build25, although I have a feeling it won't help.

[jonathanmbradshaw]

Interesting, I have the same hardware and I have started to see a lot of errors at the ethernet interface on the LAN hub. if you have access to the counters at this level it may be worth a look.

[VenimK]

You can try my builds instead from here: https://github.com/Jalle19/satip-axe/releases/tag/build25, although I have a feeling it won't help.

This morning booted with with recovery on USB
Then installed your latest FW directly in de webmin
And it booted ok
For now !!!

[Jalle19]

Glad to hear!

[VenimK]

Has Been working OK for 3 Days
Now it does the same thing ???
I guess it 's really broke
what would be a good replacement ????

[palik42]

Hi, i have same issue. i using some older version of satipaxe.. I've found 2 workarounds.

1. connect your digibit r1 directly to router( switch have issue, i've tried zyxel (not working with 1000mb port, and netgear - sometime is ip loading long time sometime need restart) with direct connection to router were these issues minimized for me.
2. you can set port on switch/router to 100mbit and try it.

[palik42]

Updated after check:
I am using this configuration:

1. original dhcp+satipaxe static e.g. x.x.x.86 ..(configured in /etc/sysconfig/config )

sometime i have issue to but it is somehow working. (sometime take time for loading ip)
I have turris omnia router - and this issue is only happening when digibit r1 is connected via switch.
If I connect digibit r1 directly to router then is no network issue.

[palik42]

I've just updated to original dhcp+satipaxe dhcp with [Jalle19]build25
same behavior as original dhcp+satipaxe static e.g. x.x.x.86 after some time is network working.

You can also try diferent ethernet cable - this could be issue too - one my cable wasn't able to start network.

But still is best way to connect digibit r1 directly to my router.