Skip to content

pimoroni/enviroplus-python

Folders and files

NameName
Last commit message
Last commit date

Latest commit

a102a25 · May 23, 2024
Jan 10, 2024
Apr 23, 2024
Apr 17, 2024
Oct 23, 2023
Apr 17, 2024
Jun 6, 2019
May 24, 2019
Apr 23, 2024
Jun 3, 2020
Jun 3, 2020
May 24, 2019
Oct 23, 2023
Jan 10, 2024
May 23, 2024
Jan 10, 2024
Apr 17, 2024
Apr 24, 2024
Oct 23, 2023
Oct 23, 2023
Jan 10, 2024

Repository files navigation

Enviro+

Designed for environmental monitoring, Enviro+ lets you measure air quality (pollutant gases and particulates), temperature, pressure, humidity, light, and noise level. Learn more - https://shop.pimoroni.com/products/enviro-plus

Build Status Coverage Status PyPi Package Python Versions

Installing

Note The code in this repository supports both the Enviro+ and Enviro Mini boards. The Enviro Mini board does not have the Gas sensor or the breakout for the PM sensor.

Enviro Plus pHAT Enviro Mini pHAT

⚠️ This library now supports Python 3 only, Python 2 is EOL - https://www.python.org/doc/sunset-python-2/

Install and configure dependencies from GitHub:

  • git clone https://github.com/pimoroni/enviroplus-python
  • cd enviroplus-python
  • ./install.sh

Note Libraries will be installed in the "pimoroni" virtual environment, you will need to activate it to run examples:

source ~/.virtualenvs/pimoroni/bin/activate

Note Raspbian/Raspberry Pi OS Lite users may first need to install git: sudo apt install git

Or... Install from PyPi and configure manually:

  • python3 -m venv --system-site-packages $HOME/.virtualenvs/pimoroni
  • Run python3 -m pip install enviroplus

And install additional dependencies:

sudo apt install python3-numpy python3-smbus python3-pil python3-setuptools

Note this will not perform any of the required configuration changes on your Pi, you may additionally need to:

  • Enable i2c: raspi-config nonint do_i2c 0
  • Enable SPI: raspi-config nonint do_spi 0

And if you're using a PMS5003 sensor you will need to:

Bookworm

  • Enable serial: raspi-config nonint do_serial_hw 0
  • Disable serial terminal: raspi-config nonint do_serial_cons 1
  • Add dtoverlay=pi3-miniuart-bt to your /boot/firmware/config.txt

Bullseye

  • Enable serial: raspi-config nonint set_config_var enable_uart 1 /boot/config.txt
  • Disable serial terminal: sudo raspi-config nonint do_serial 1
  • Add dtoverlay=pi3-miniuart-bt to your /boot/config.txt

Alternate Software & User Projects

Help & Support