rt5645 stops working after hibernation

[tallero]

I'm attaching log when resuming:

[  221.053857] i2c_designware 80860F41:01: timeout waiting for bus ready
[  221.059637] PM: hibernation exit
[  221.087002] i2c_designware 80860F41:01: timeout waiting for bus ready
[  221.109372] i2c_designware 80860F41:01: timeout waiting for bus ready
[  222.054425] intel_sst_acpi 80860F28:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x2
[  222.054445] intel_sst_acpi 80860F28:00: not suspending FW!!, Err: -16
[  222.347054] i2c_designware 80860F41:01: timeout in disabling adapter
[  223.121107] intel_sst_acpi 80860F28:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x2
[  223.121123] intel_sst_acpi 80860F28:00: fw returned err -16
[  223.121144] sst-mfld-platform sst-mfld-platform: ASoC: can't open interface ssp0-port: -16
[  223.121157]  SSP2-Codec: ASoC: BE open failed -16
[  223.121165]  Audio Port: ASoC: failed to start some BEs -16
[  223.331472] i2c_hid i2c-PDEC3393:00: i2c-PDEC3393:00 supply vdd not found, using dummy regulator
[  223.355284] asus 0018:0B05:8585.0002: Fixing up Asus notebook report descriptor
[  223.356608] input: PDEC3393:00 0B05:8585 as /devices/platform/80860F41:00/i2c-0/i2c-PDEC3393:00/0018:0B05:8585.0002/input/input13
[  223.358299] asus 0018:0B05:8585.0002: input,hidraw0: I2C HID v1.00 Keyboard [PDEC3393:00 0B05:8585] on i2c-PDEC3393:00
[  223.376195] i2c_hid i2c-ELAN0100:00: i2c-ELAN0100:00 supply vdd not found, using dummy regulator
[  223.389852] elan_i2c i2c-ELAN0100:00: i2c-ELAN0100:00 supply vcc not found, using dummy regulator
[  223.710713] elan_i2c i2c-ELAN0100:00: Elan Touchpad: Module ID: 0x0026, Firmware: 0x000a, Sample: 0x0001, IAP: 0x0000
[  223.713592] input: Elan Touchpad as /devices/platform/80860F41:03/i2c-3/i2c-ELAN0100:00/input/input14
[  223.838875] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[  223.840433] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[  223.842034] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[  223.844846] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[  223.900202] brcmfmac: F1 signature read @0x18000000=0x1602a94c
[  223.908628] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43340-sdio for chip BCM43340/2
[  223.910667] usbcore: registered new interface driver brcmfmac
[  224.123419] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43340-sdio for chip BCM43340/2
[  224.123481] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43340-sdio.clm_blob failed with error -2
[  224.123487] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[  224.124034] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43340/2 wl0: Oct 23 2017 08:41:23 version 6.10.190.70 (r674464) FWID 01-98d71006
[  224.183111] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  224.269551] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  224.807396] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  224.970585] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  226.385750] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  228.271517] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  417.150194]  Audio Port: ASoC: no backend DAIs enabled for Audio Port