wemux enhances tmux to make multi-user terminal multiplexing both easier and more powerful. It allows users to host a wemux server and have clients join in either:
Mirror Mode gives clients (another SSH user on your machine) read-only access to the session, allowing them to see you work, or
Pair Mode allows the client and yourself to work in the same terminal (shared cursor)
Rogue Mode allows the client to pair or work independently in another window (separate cursors) in the same tmux session.
It features multi-server support as well as user listing and notifications when users attach/detach.
IMPORTANT: Wemux required tmux version >= 1.6
If you have Homebrew installed you can install wemux with a fairly simple:
brew install https://github.com/downloads/zolrath/wemux/wemux.rb
The user that installed wemux will automatically be added to the wemux host list.
To change the host or add more hosts, edit /usr/local/etc/wemux.conf and add the
username to the host_list array.
Users in the host_list will be able to start new wemux servers, all other users will be wemux clients and join these servers.
$ vim /usr/local/etc/wemux.conf
OR
$ wemux conf
host_list=(zolrath brocksamson)
The rest of this readme will operate under the assumption you'll place wemux
in wemux/ in your /usr/local/share directory. To make wemux available for
all users, perform the following steps, using sudo as required:
Git clone this repo.
git clone git://github.com/zolrath/wemux.git /usr/local/share/wemux
Symlink the wemux file into your $PATH via /usr/local/bin/,
being sure to use the full path.
ln -s /usr/local/share/wemux/wemux /usr/local/bin/wemux
IMPORTANT: Copy the wemux.conf.example file to /usr/local/etc/wemux.conf
cp /usr/local/share/wemux/wemux.conf.example /usr/local/etc/wemux.conf
Then set a user to be a wemux host by adding their username to the host_list in
/usr/local/etc/wemux.conf. Users in the host_list will be able to start new wemux
servers, all other users will be wemux clients and join these servers.
vim /usr/local/etc/wemux.conf
host_list=(zolrath brocksamson)
To upgrade to a new version of wemux return to the /usr/local/share/wemux
directory and perform a git pull
Use wemux start to start a wemux server, chmod /tmp/wemux-wemux to 1777 so
that other users may connect to it, and attach to it. If a wemux server
already exists, it will attach to it instead.
Use wemux attach to attach to an existing wemux server.
Use wemux stop to kill the wemux server and remove the /tmp/wemux-wemux
socket.
Use wemux kick <username> to kick an SSH user from the server and remove
their wemux rogue sessions.
Use wemux config to open /usr/local/etc/wemux.conf in your $EDITOR.
Note this only works if you have the environment variable EDITOR configured.
When wemux is run without any arguments in host mode, it is just like
running wemux start. It will reattach to an existing wemux server if it
exists, otherwise it will start a new server.
Use wemux mirror to attach to server in read-only mode.
Use wemux pair to attach to server in pair mode, allowing the client to
control the terminal as well.
Use wemux rogue to attach to server in rogue mode, which allows both editing
with the host and switching to windows independently from the host.
Use wemux logout to remove your rogue mode session.
When wemux is run without any arguments in client mode, its behavior
attempts to intelligently select mirror, pair, or rogue:
- If the client does not have an existing rogue session it will attach to the wemux server in pair mode.
- If the client has already started a wemux rogue session, it will reattach to the server in rogue mode.
- If both rogue and pair mode are disabled, it will attach in mirror mode.
- By setting
default_client_mode="rogue"inwemux.confthis can be changed to always join in rogue mode, even if a rogue session doesn't already exist.
wemux passes commands it doesn't understand through to tmux with the correct socket setting.
wemux list-sessions is equivalent to entering tmux -S /tmp/wemux-wemux list-sessions
wemux can display a list of connected users, indicating users in mirror mode with [m] at the end of their name.
If you'd like to see a list of all users currently connected to the wemux server, you have three options:
Enter wemux users in the terminal to display a list of all currently
connected wemux users.
$ wemux users
Users connected to 'wemux':
1. zolrath
2. csagan[m]
You can add the user list to your status bar by adding #(wemux status_users)
where you see fit by editing your ~/tmux.conf file.
set -g status-right "#(wemux status_users)"
If you'd rather display users on command via a tmux message, similar to the
user attachment/detachment messages, you can do so by editing your
~/tmux.conf file. Pick whatever key you'd like to bind the displaying the
message to. Using t as an example:
unbind t
bind t run-shell 'wemux display_users'
Note that the tmux prefix should be pressed before t to activate the command.
User listing can be disabled by setting allow_user_list="false" in
wemux.conf
All commands have a short form. s for start, a for attach, p for pair etc.
For a complete list, type wemux help (or wemux h)
wemux supports specifying the joining different wemux servers via wemux join <server>. This allows multiple hosts on the same machine to host their own
independent wemux servers with their own clients. By default this option is
disabled.
wemux will remember the last server specified to in order to make reconnecting
to the same server easy. wemux help will output the currently specified
server along with the wemux command list.
Changing servers can be enabled by setting allow_server_change="true" in
/usr/local/etc/wemux.conf
To change the wemux server run wemux join <server>. The name will be sanitized to contain no spaces or uppercase letters.
$ wemux join Project X
Changed wemux server from 'wemux' to 'project-x'
$ wemux
$ wemux stop
$ wemux reset
Changed wemux server from 'project-x' to 'wemux'
Join wemux server with specified name.
$ wemux join rails
Changed wemux server from 'wemux' to 'rails'
Alternatively, enter the server number displayed next to the server name in wemux list.
$ wemux j 1
Changed wemux server from 'rails' to 'project-x'
In order to easily return to the default server you can run wemux reset
Joins the default wemux server: wemux (or value of default_server_name in wemux.conf)
$ wemux reset
Changed wemux server from 'project-x' to 'wemux'
To list the name of all currently running wemux servers run wemux list
List all currently active wemux servers.
$ wemux list
Currently active wemux servers:
1. project-x
2. rails
3. wemux <- current server
wemux join and wemux stop both accept either the name of a server or
the number indicated next to the name in wemux list.
Listing servers can be disabled by setting allow_server_list="false" in
/usr/local/etc/wemux.conf
There are a number of additional options that be configured in
/usr/local/etc/wemux.conf. In most cases the only option that must be changed is the
host_list array. To open your wemux configuration file, you can either open
/usr/local/etc/wemux.conf manually or run wemux config
To have an account act as host, ensure that you have added their username to the
/usr/local/etc/wemux.conf file's host_list array.
host_list=(zolrath hostusername brocksamson)
Pair mode can be disabled, only allowing clients to attach to the server in
mirror mode by setting allow_pair_mode="false"
Rogue mode can be disabled, only allowing clients to attach to the server in
mirror mode by setting allow_rogue_mode="false"
When clients enter 'wemux' with no arguments by default it will first attempt to join an existing rogue mode session. If there is no rogue session it will start in pair mode. By setting default_client_mode to "rogue", 'wemux' with no arguments will always join a rogue mode session, even if it has to create it.
This can be changed by setting default_client_mode="rogue"
The default wemux server name will be used with wemux reset and when
allow_server_name is not enabled in wemux.conf.
This can be changed by setting default_server_name="customname"
The ability to change servers can be enabled by setting
allow_server_change="true"
Listing servers can be disabled by setting allow_server_list="false"
Listing users can be disabled by setting allow_user_list="false" in
wemux.conf
Kicking SSH users from the server can be disabled by setting
allow_kick_user="false" in wemux.conf
When a user joins a server in either mirror, pair, or rogue mode, a message is displayed to all currently attached users:
csagan has attached in mirror mode.
csagan has detached.
This can be disabled by setting announce_attach="false"
In addition, when a user switches from one server to another via the wemux join <servername> command, their movement is displayed similarly to the
attach messages.
If csagan enters wemux join applepie the users on the default server
wemux will see:
csagan has switched to server: applepie
If csagan returns to default server with: wemux reset users on wemux
will see:
csagan has joined this server.
This can be disabled by setting announce_server_change="false"
To make an SSHed user start in a wemux mode automatically, add one of the
following lines to the users .bash_profile or .zshrc
Option 1: Automatically log the client into mirror mode upon login, disconnect them from the server when they detach.
wemux mirror; exit
Option 2: Automatically start the client in mirror mode but allow them to detach.
wemux mirror
Option 3: Automatically start the client in pair mode but allow them to detach.
wemux pair
Option 4: Automatically start the client in rogue mode but allow them to detach.
wemux rogue
Option 5: Only display the connection commands, don't automatically start any modes.
wemux help
Please note that this does not ensure a logged in user will not be able to exit tmux and access their shell. If the user is not trusted, you must perform any security measures one would normally perform for a remote user.