Merge tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, bpf.

  Quite a handful of old regression fixes but most of those are
  pre-5.16.

  Current release - regressions:

   - fix memory leaks in the skb free deferral scheme if upper layer
     protocols are used, i.e. in-kernel TCP readers like TLS

  Current release - new code bugs:

   - nf_tables: fix NULL check typo in _clone() functions

   - change the default to y for Vertexcom vendor Kconfig

   - a couple of fixes to incorrect uses of ref tracking

   - two fixes for constifying netdev->dev_addr

  Previous releases - regressions:

   - bpf:
      - various verifier fixes mainly around register offset handling
        when passed to helper functions
      - fix mount source displayed for bpffs (none -> bpffs)

   - bonding:
      - fix extraction of ports for connection hash calculation
      - fix bond_xmit_broadcast return value when some devices are down

   - phy: marvell: add Marvell specific PHY loopback

   - sch_api: don't skip qdisc attach on ingress, prevent ref leak

   - htb: restore minimal packet size handling in rate control

   - sfp: fix high power modules without diagnostic monitoring

   - mscc: ocelot:
      - don't let phylink re-enable TX PAUSE on the NPI port
      - don't dereference NULL pointers with shared tc filters

   - smsc95xx: correct reset handling for LAN9514

   - cpsw: avoid alignment faults by taking NET_IP_ALIGN into account

   - phy: micrel: use kszphy_suspend/_resume for irq aware devices,
     avoid races with the interrupt

  Previous releases - always broken:

   - xdp: check prog type before updating BPF link

   - smc: resolve various races around abnormal connection termination

   - sit: allow encapsulated IPv6 traffic to be delivered locally

   - axienet: fix init/reset handling, add missing barriers, read the
     right status words, stop queues correctly

   - add missing dev_put() in sock_timestamping_bind_phc()

  Misc:

   - ipv4: prevent accidentally passing RTO_ONLINK to
     ip_route_output_key_hash() by sanitizing flags

   - ipv4: avoid quadratic behavior in netns dismantle

   - stmmac: dwmac-oxnas: add support for OX810SE

   - fsl: xgmac_mdio: add workaround for erratum A-009885"

* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
  ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
  ipv4: avoid quadratic behavior in netns dismantle
  net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
  powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
  dt-bindings: net: Document fsl,erratum-a009885
  net/fsl: xgmac_mdio: Add workaround for erratum A-009885
  net: mscc: ocelot: fix using match before it is set
  net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
  net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
  nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
  net: axienet: increase default TX ring size to 128
  net: axienet: fix for TX busy handling
  net: axienet: fix number of TX ring slots for available check
  net: axienet: Fix TX ring slot available check
  net: axienet: limit minimum TX ring size
  net: axienet: add missing memory barriers
  net: axienet: reset core on initialization prior to MDIO access
  net: axienet: Wait for PhyRstCmplt after core reset
  net: axienet: increase reset timeout
  bpf, selftests: Add ringbuf memory type confusion test
  ...

Author: torvalds

Documentation/devicetree/bindings/net/fsl-fman.txt

@@ -410,6 +410,15 @@ PROPERTIES
 		The settings and programming routines for internal/external
 		MDIO are different. Must be included for internal MDIO.
 
+- fsl,erratum-a009885
+		Usage: optional
+		Value type: <boolean>
+		Definition: Indicates the presence of the A009885
+		erratum describing that the contents of MDIO_DATA may
+		become corrupt unless it is read within 16 MDC cycles
+		of MDIO_CFG[BSY] being cleared, when performing an
+		MDIO read operation.
+
 - fsl,erratum-a011043
 		Usage: optional
 		Value type: <boolean>

Documentation/devicetree/bindings/net/oxnas-dwmac.txt

@@ -9,6 +9,9 @@ Required properties on all platforms:
 - compatible:	For the OX820 SoC, it should be :
 		- "oxsemi,ox820-dwmac" to select glue
 		- "snps,dwmac-3.512" to select IP version.
+		For the OX810SE SoC, it should be :
+		- "oxsemi,ox810se-dwmac" to select glue
+		- "snps,dwmac-3.512" to select IP version.
 
 - clocks: Should contain phandles to the following clocks
 - clock-names:	Should contain the following:

arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi

@@ -79,13 +79,15 @@ fman0: fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xfc000 0x1000>;
+		fsl,erratum-a009885;
 	};
 
 	xmdio0: mdio@fd000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xfd000 0x1000>;
+		fsl,erratum-a009885;
 	};
 };
 

drivers/atm/iphase.c

@@ -178,7 +178,6 @@ static void ia_hack_tcq(IADEV *dev) {
 
 static u16 get_desc (IADEV *dev, struct ia_vcc *iavcc) {
   u_short 		desc_num, i;
-  struct sk_buff        *skb;
   struct ia_vcc         *iavcc_r = NULL; 
   unsigned long delta;
   static unsigned long timer = 0;
@@ -202,8 +201,7 @@ static u16 get_desc (IADEV *dev, struct ia_vcc *iavcc) {
            else 
               dev->ffL.tcq_rd -= 2;
            *(u_short *)(dev->seg_ram + dev->ffL.tcq_rd) = i+1;
-           if (!(skb = dev->desc_tbl[i].txskb) || 
-                          !(iavcc_r = dev->desc_tbl[i].iavcc))
+           if (!dev->desc_tbl[i].txskb || !(iavcc_r = dev->desc_tbl[i].iavcc))
               printk("Fatal err, desc table vcc or skb is NULL\n");
            else 
               iavcc_r->vc_desc_cnt--;

drivers/net/bonding/bond_main.c

@@ -3874,8 +3874,8 @@ u32 bond_xmit_hash(struct bonding *bond, struct sk_buff *skb)
 	    skb->l4_hash)
 		return skb->hash;
 
-	return __bond_xmit_hash(bond, skb, skb->head, skb->protocol,
-				skb->mac_header, skb->network_header,
+	return __bond_xmit_hash(bond, skb, skb->data, skb->protocol,
+				skb_mac_offset(skb), skb_network_offset(skb),
 				skb_headlen(skb));
 }
 
@@ -4884,25 +4884,39 @@ static netdev_tx_t bond_xmit_broadcast(struct sk_buff *skb,
 	struct bonding *bond = netdev_priv(bond_dev);
 	struct slave *slave = NULL;
 	struct list_head *iter;
+	bool xmit_suc = false;
+	bool skb_used = false;
 
 	bond_for_each_slave_rcu(bond, slave, iter) {
-		if (bond_is_last_slave(bond, slave))
-			break;
-		if (bond_slave_is_up(slave) && slave->link == BOND_LINK_UP) {
-			struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
+		struct sk_buff *skb2;
+
+		if (!(bond_slave_is_up(slave) && slave->link == BOND_LINK_UP))
+			continue;
 
+		if (bond_is_last_slave(bond, slave)) {
+			skb2 = skb;
+			skb_used = true;
+		} else {
+			skb2 = skb_clone(skb, GFP_ATOMIC);
 			if (!skb2) {
 				net_err_ratelimited("%s: Error: %s: skb_clone() failed\n",
 						    bond_dev->name, __func__);
 				continue;
 			}
-			bond_dev_queue_xmit(bond, skb2, slave->dev);
 		}
+
+		if (bond_dev_queue_xmit(bond, skb2, slave->dev) == NETDEV_TX_OK)
+			xmit_suc = true;
 	}
-	if (slave && bond_slave_is_up(slave) && slave->link == BOND_LINK_UP)
-		return bond_dev_queue_xmit(bond, skb, slave->dev);
 
-	return bond_tx_drop(bond_dev, skb);
+	if (!skb_used)
+		dev_kfree_skb_any(skb);
+
+	if (xmit_suc)
+		return NETDEV_TX_OK;
+
+	atomic_long_inc(&bond_dev->tx_dropped);
+	return NET_XMIT_DROP;
 }
 
 /*------------------------- Device initialization ---------------------------*/

drivers/net/ethernet/allwinner/sun4i-emac.c

@@ -106,9 +106,9 @@ static void emac_update_speed(struct net_device *dev)
 
 	/* set EMAC SPEED, depend on PHY  */
 	reg_val = readl(db->membase + EMAC_MAC_SUPP_REG);
-	reg_val &= ~(0x1 << 8);
+	reg_val &= ~EMAC_MAC_SUPP_100M;
 	if (db->speed == SPEED_100)
-		reg_val |= 1 << 8;
+		reg_val |= EMAC_MAC_SUPP_100M;
 	writel(reg_val, db->membase + EMAC_MAC_SUPP_REG);
 }
 
@@ -264,7 +264,7 @@ static void emac_dma_done_callback(void *arg)
 
 	/* re enable interrupt */
 	reg_val = readl(db->membase + EMAC_INT_CTL_REG);
-	reg_val |= (0x01 << 8);
+	reg_val |= EMAC_INT_CTL_RX_EN;
 	writel(reg_val, db->membase + EMAC_INT_CTL_REG);
 
 	db->emacrx_completed_flag = 1;
@@ -429,7 +429,7 @@ static unsigned int emac_powerup(struct net_device *ndev)
 	/* initial EMAC */
 	/* flush RX FIFO */
 	reg_val = readl(db->membase + EMAC_RX_CTL_REG);
-	reg_val |= 0x8;
+	reg_val |= EMAC_RX_CTL_FLUSH_FIFO;
 	writel(reg_val, db->membase + EMAC_RX_CTL_REG);
 	udelay(1);
 
@@ -441,8 +441,8 @@ static unsigned int emac_powerup(struct net_device *ndev)
 
 	/* set MII clock */
 	reg_val = readl(db->membase + EMAC_MAC_MCFG_REG);
-	reg_val &= (~(0xf << 2));
-	reg_val |= (0xD << 2);
+	reg_val &= ~EMAC_MAC_MCFG_MII_CLKD_MASK;
+	reg_val |= EMAC_MAC_MCFG_MII_CLKD_72;
 	writel(reg_val, db->membase + EMAC_MAC_MCFG_REG);
 
 	/* clear RX counter */
@@ -506,7 +506,7 @@ static void emac_init_device(struct net_device *dev)
 
 	/* enable RX/TX0/RX Hlevel interrup */
 	reg_val = readl(db->membase + EMAC_INT_CTL_REG);
-	reg_val |= (0xf << 0) | (0x01 << 8);
+	reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN | EMAC_INT_CTL_RX_EN);
 	writel(reg_val, db->membase + EMAC_INT_CTL_REG);
 
 	spin_unlock_irqrestore(&db->lock, flags);
@@ -637,7 +637,9 @@ static void emac_rx(struct net_device *dev)
 		if (!rxcount) {
 			db->emacrx_completed_flag = 1;
 			reg_val = readl(db->membase + EMAC_INT_CTL_REG);
-			reg_val |= (0xf << 0) | (0x01 << 8);
+			reg_val |= (EMAC_INT_CTL_TX_EN |
+					EMAC_INT_CTL_TX_ABRT_EN |
+					EMAC_INT_CTL_RX_EN);
 			writel(reg_val, db->membase + EMAC_INT_CTL_REG);
 
 			/* had one stuck? */
@@ -669,7 +671,9 @@ static void emac_rx(struct net_device *dev)
 			writel(reg_val | EMAC_CTL_RX_EN,
 			       db->membase + EMAC_CTL_REG);
 			reg_val = readl(db->membase + EMAC_INT_CTL_REG);
-			reg_val |= (0xf << 0) | (0x01 << 8);
+			reg_val |= (EMAC_INT_CTL_TX_EN |
+					EMAC_INT_CTL_TX_ABRT_EN |
+					EMAC_INT_CTL_RX_EN);
 			writel(reg_val, db->membase + EMAC_INT_CTL_REG);
 
 			db->emacrx_completed_flag = 1;
@@ -783,20 +787,20 @@ static irqreturn_t emac_interrupt(int irq, void *dev_id)
 	}
 
 	/* Transmit Interrupt check */
-	if (int_status & (0x01 | 0x02))
+	if (int_status & EMAC_INT_STA_TX_COMPLETE)
 		emac_tx_done(dev, db, int_status);
 
-	if (int_status & (0x04 | 0x08))
+	if (int_status & EMAC_INT_STA_TX_ABRT)
 		netdev_info(dev, " ab : %x\n", int_status);
 
 	/* Re-enable interrupt mask */
 	if (db->emacrx_completed_flag == 1) {
 		reg_val = readl(db->membase + EMAC_INT_CTL_REG);
-		reg_val |= (0xf << 0) | (0x01 << 8);
+		reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN | EMAC_INT_CTL_RX_EN);
 		writel(reg_val, db->membase + EMAC_INT_CTL_REG);
 	} else {
 		reg_val = readl(db->membase + EMAC_INT_CTL_REG);
-		reg_val |= (0xf << 0);
+		reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN);
 		writel(reg_val, db->membase + EMAC_INT_CTL_REG);
 	}
 
@@ -1068,6 +1072,7 @@ static int emac_probe(struct platform_device *pdev)
 	clk_disable_unprepare(db->clk);
 out_dispose_mapping:
 	irq_dispose_mapping(ndev->irq);
+	dma_release_channel(db->rx_chan);
 out_iounmap:
 	iounmap(db->membase);
 out:

drivers/net/ethernet/allwinner/sun4i-emac.h

@@ -38,6 +38,7 @@
 #define EMAC_RX_CTL_REG		(0x3c)
 #define EMAC_RX_CTL_AUTO_DRQ_EN		(1 << 1)
 #define EMAC_RX_CTL_DMA_EN		(1 << 2)
+#define EMAC_RX_CTL_FLUSH_FIFO		(1 << 3)
 #define EMAC_RX_CTL_PASS_ALL_EN		(1 << 4)
 #define EMAC_RX_CTL_PASS_CTL_EN		(1 << 5)
 #define EMAC_RX_CTL_PASS_CRC_ERR_EN	(1 << 6)
@@ -61,7 +62,21 @@
 #define EMAC_RX_IO_DATA_STATUS_OK	(1 << 7)
 #define EMAC_RX_FBC_REG		(0x50)
 #define EMAC_INT_CTL_REG	(0x54)
+#define EMAC_INT_CTL_RX_EN	(1 << 8)
+#define EMAC_INT_CTL_TX0_EN	(1)
+#define EMAC_INT_CTL_TX1_EN	(1 << 1)
+#define EMAC_INT_CTL_TX_EN	(EMAC_INT_CTL_TX0_EN | EMAC_INT_CTL_TX1_EN)
+#define EMAC_INT_CTL_TX0_ABRT_EN	(0x1 << 2)
+#define EMAC_INT_CTL_TX1_ABRT_EN	(0x1 << 3)
+#define EMAC_INT_CTL_TX_ABRT_EN	(EMAC_INT_CTL_TX0_ABRT_EN | EMAC_INT_CTL_TX1_ABRT_EN)
 #define EMAC_INT_STA_REG	(0x58)
+#define EMAC_INT_STA_TX0_COMPLETE	(0x1)
+#define EMAC_INT_STA_TX1_COMPLETE	(0x1 << 1)
+#define EMAC_INT_STA_TX_COMPLETE	(EMAC_INT_STA_TX0_COMPLETE | EMAC_INT_STA_TX1_COMPLETE)
+#define EMAC_INT_STA_TX0_ABRT	(0x1 << 2)
+#define EMAC_INT_STA_TX1_ABRT	(0x1 << 3)
+#define EMAC_INT_STA_TX_ABRT	(EMAC_INT_STA_TX0_ABRT | EMAC_INT_STA_TX1_ABRT)
+#define EMAC_INT_STA_RX_COMPLETE	(0x1 << 8)
 #define EMAC_MAC_CTL0_REG	(0x5c)
 #define EMAC_MAC_CTL0_RX_FLOW_CTL_EN	(1 << 2)
 #define EMAC_MAC_CTL0_TX_FLOW_CTL_EN	(1 << 3)
@@ -87,8 +102,11 @@
 #define EMAC_MAC_CLRT_RM		(0x0f)
 #define EMAC_MAC_MAXF_REG	(0x70)
 #define EMAC_MAC_SUPP_REG	(0x74)
+#define EMAC_MAC_SUPP_100M	(0x1 << 8)
 #define EMAC_MAC_TEST_REG	(0x78)
 #define EMAC_MAC_MCFG_REG	(0x7c)
+#define EMAC_MAC_MCFG_MII_CLKD_MASK	(0xff << 2)
+#define EMAC_MAC_MCFG_MII_CLKD_72	(0x0d << 2)
 #define EMAC_MAC_A0_REG		(0x98)
 #define EMAC_MAC_A1_REG		(0x9c)
 #define EMAC_MAC_A2_REG		(0xa0)

drivers/net/ethernet/apple/bmac.c

@@ -1237,6 +1237,7 @@ static int bmac_probe(struct macio_dev *mdev, const struct of_device_id *match)
 	struct bmac_data *bp;
 	const unsigned char *prop_addr;
 	unsigned char addr[6];
+	u8 macaddr[6];
 	struct net_device *dev;
 	int is_bmac_plus = ((int)match->data) != 0;
 
@@ -1284,7 +1285,9 @@ static int bmac_probe(struct macio_dev *mdev, const struct of_device_id *match)
 
 	rev = addr[0] == 0 && addr[1] == 0xA0;
 	for (j = 0; j < 6; ++j)
-		dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j];
+		macaddr[j] = rev ? bitrev8(addr[j]): addr[j];
+
+	eth_hw_addr_set(dev, macaddr);
 
 	/* Enable chip without interrupts for now */
 	bmac_enable_and_reset_chip(dev);

drivers/net/ethernet/apple/mace.c

@@ -90,7 +90,7 @@ static void mace_set_timeout(struct net_device *dev);
 static void mace_tx_timeout(struct timer_list *t);
 static inline void dbdma_reset(volatile struct dbdma_regs __iomem *dma);
 static inline void mace_clean_rings(struct mace_data *mp);
-static void __mace_set_address(struct net_device *dev, void *addr);
+static void __mace_set_address(struct net_device *dev, const void *addr);
 
 /*
  * If we can't get a skbuff when we need it, we use this area for DMA.
@@ -112,6 +112,7 @@ static int mace_probe(struct macio_dev *mdev, const struct of_device_id *match)
 	struct net_device *dev;
 	struct mace_data *mp;
 	const unsigned char *addr;
+	u8 macaddr[ETH_ALEN];
 	int j, rev, rc = -EBUSY;
 
 	if (macio_resource_count(mdev) != 3 || macio_irq_count(mdev) != 3) {
@@ -167,8 +168,9 @@ static int mace_probe(struct macio_dev *mdev, const struct of_device_id *match)
 
 	rev = addr[0] == 0 && addr[1] == 0xA0;
 	for (j = 0; j < 6; ++j) {
-		dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j];
+		macaddr[j] = rev ? bitrev8(addr[j]): addr[j];
 	}
+	eth_hw_addr_set(dev, macaddr);
 	mp->chipid = (in_8(&mp->mace->chipid_hi) << 8) |
 			in_8(&mp->mace->chipid_lo);
 
@@ -369,11 +371,12 @@ static void mace_reset(struct net_device *dev)
 	out_8(&mb->plscc, PORTSEL_GPSI + ENPLSIO);
 }
 
-static void __mace_set_address(struct net_device *dev, void *addr)
+static void __mace_set_address(struct net_device *dev, const void *addr)
 {
     struct mace_data *mp = netdev_priv(dev);
     volatile struct mace __iomem *mb = mp->mace;
-    unsigned char *p = addr;
+    const unsigned char *p = addr;
+    u8 macaddr[ETH_ALEN];
     int i;
 
     /* load up the hardware address */
@@ -385,7 +388,10 @@ static void __mace_set_address(struct net_device *dev, void *addr)
 	    ;
     }
     for (i = 0; i < 6; ++i)
-	out_8(&mb->padr, dev->dev_addr[i] = p[i]);
+        out_8(&mb->padr, macaddr[i] = p[i]);
+
+    eth_hw_addr_set(dev, macaddr);
+
     if (mp->chipid != BROKEN_ADDRCHG_REV)
         out_8(&mb->iac, 0);
 }

drivers/net/ethernet/broadcom/genet/bcmgenet.c

@@ -4020,10 +4020,12 @@ static int bcmgenet_probe(struct platform_device *pdev)
 
 	/* Request the WOL interrupt and advertise suspend if available */
 	priv->wol_irq_disabled = true;
-	err = devm_request_irq(&pdev->dev, priv->wol_irq, bcmgenet_wol_isr, 0,
-			       dev->name, priv);
-	if (!err)
-		device_set_wakeup_capable(&pdev->dev, 1);
+	if (priv->wol_irq > 0) {
+		err = devm_request_irq(&pdev->dev, priv->wol_irq,
+				       bcmgenet_wol_isr, 0, dev->name, priv);
+		if (!err)
+			device_set_wakeup_capable(&pdev->dev, 1);
+	}
 
 	/* Set the needed headroom to account for any possible
 	 * features enabling/disabling at runtime