We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
when running make sd-image I'm getting this error. Hardware Raspberry Pi 3B+ OS: Raspbian OS 64 bit
piuser@raspberrypi:~/pi-builder $ sudo make sd-image docker build -t image-builder-rpi . Sending build context to Docker daemon 799.7kB Step 1/4 : FROM hypriot/image-builder:latest ---> 9738ed9fc79d Step 2/4 : RUN apt-get update && DEBIAN_FRONTEND=noninteractive apt-get install -y binfmt-support qemu qemu-user-static --no-install-recommends && rm -rf /var/lib/apt/lists/* ---> [Warning] The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested ---> Running in a380dcd05866 Ign:1 http://deb.debian.org/debian stretch InRelease Get:2 http://security.debian.org/debian-security stretch/updates InRelease [59.1 kB] Get:3 http://deb.debian.org/debian stretch-updates InRelease [93.6 kB] Get:4 http://deb.debian.org/debian stretch Release [118 kB] Get:5 http://deb.debian.org/debian stretch Release.gpg [3177 B] Get:6 http://security.debian.org/debian-security stretch/updates/main amd64 Packages [996 kB] Get:7 http://deb.debian.org/debian stretch/main amd64 Packages [9610 kB] Fetched 10.9 MB in 57s (188 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libpipeline1 libxen-4.8 openbios-ppc openbios-sparc openhackware qemu-slof qemu-system qemu-system-arm qemu-system-mips qemu-system-misc qemu-system-ppc qemu-system-sparc qemu-user qemu-utils Suggested packages: samba vde2 qemu-block-extra sudo Recommended packages: qemu-efi The following NEW packages will be installed: binfmt-support libpipeline1 openbios-ppc openbios-sparc openhackware qemu qemu-slof qemu-system qemu-system-arm qemu-system-mips qemu-system-misc qemu-system-ppc qemu-system-sparc qemu-user qemu-user-static The following packages will be upgraded: libxen-4.8 qemu-utils 2 upgraded, 15 newly installed, 0 to remove and 133 not upgraded. Need to get 56.5 MB of archives. After this operation, 376 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian stretch/main amd64 libpipeline1 amd64 1.4.1-2 [27.6 kB] Get:2 http://security.debian.org/debian-security stretch/updates/main amd64 qemu-system-arm amd64 1:2.8+dfsg-6+deb9u17 [5254 kB] Get:3 http://deb.debian.org/debian stretch/main amd64 binfmt-support amd64 2.1.6-2 [59.5 kB] Get:4 http://deb.debian.org/debian stretch/main amd64 libxen-4.8 amd64 4.8.5.final+shim4.10.4-1+deb9u12 [413 kB] Get:5 http://deb.debian.org/debian stretch/main amd64 openhackware all 0.4.1+git-20140423.c559da7c-4 [64.0 kB] Get:6 http://deb.debian.org/debian stretch/main amd64 qemu-slof all 20161019+dfsg-1 [170 kB] Get:7 http://deb.debian.org/debian stretch/main amd64 openbios-ppc all 1.1.git20161120-2 [116 kB] Get:8 http://deb.debian.org/debian stretch/main amd64 openbios-sparc all 1.1.git20161120-2 [160 kB] Get:9 http://security.debian.org/debian-security stretch/updates/main amd64 qemu-system-mips amd64 1:2.8+dfsg-6+deb9u17 [8988 kB] Get:10 http://security.debian.org/debian-security stretch/updates/main amd64 qemu-system-ppc amd64 1:2.8+dfsg-6+deb9u17 [7036 kB] Get:11 http://security.debian.org/debian-security stretch/updates/main amd64 qemu-system-sparc amd64 1:2.8+dfsg-6+deb9u17 [2560 kB] Get:12 http://security.debian.org/debian-security stretch/updates/main amd64 qemu-system-misc amd64 1:2.8+dfsg-6+deb9u17 [13.5 MB] Get:13 http://security.debian.org/debian-security stretch/updates/main amd64 qemu-system amd64 1:2.8+dfsg-6+deb9u17 [70.7 kB] Get:14 http://security.debian.org/debian-security stretch/updates/main amd64 qemu-user amd64 1:2.8+dfsg-6+deb9u17 [7954 kB] Get:15 http://security.debian.org/debian-security stretch/updates/main amd64 qemu-utils amd64 1:2.8+dfsg-6+deb9u17 [992 kB] Get:16 http://security.debian.org/debian-security stretch/updates/main amd64 qemu amd64 1:2.8+dfsg-6+deb9u17 [156 kB] Get:17 http://security.debian.org/debian-security stretch/updates/main amd64 qemu-user-static amd64 1:2.8+dfsg-6+deb9u17 [8991 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 56.5 MB in 20s (2748 kB/s) Selecting previously unselected package libpipeline1:amd64. (Reading database ... 25938 files and directories currently installed.) Preparing to unpack .../00-libpipeline1_1.4.1-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.4.1-2) ... Selecting previously unselected package binfmt-support. Preparing to unpack .../01-binfmt-support_2.1.6-2_amd64.deb ... Unpacking binfmt-support (2.1.6-2) ... Preparing to unpack .../02-libxen-4.8_4.8.5.final+shim4.10.4-1+deb9u12_amd64.deb ... Unpacking libxen-4.8:amd64 (4.8.5.final+shim4.10.4-1+deb9u12) over (4.8.3+xsa262+shim4.10.0+comet3-1+deb9u7) ... Selecting previously unselected package openhackware. Preparing to unpack .../03-openhackware_0.4.1+git-20140423.c559da7c-4_all.deb ... Unpacking openhackware (0.4.1+git-20140423.c559da7c-4) ... Selecting previously unselected package qemu-system-arm. Preparing to unpack .../04-qemu-system-arm_1%3a2.8+dfsg-6+deb9u17_amd64.deb ... Unpacking qemu-system-arm (1:2.8+dfsg-6+deb9u17) ... Selecting previously unselected package qemu-system-mips. Preparing to unpack .../05-qemu-system-mips_1%3a2.8+dfsg-6+deb9u17_amd64.deb ... Unpacking qemu-system-mips (1:2.8+dfsg-6+deb9u17) ... Selecting previously unselected package qemu-slof. Preparing to unpack .../06-qemu-slof_20161019+dfsg-1_all.deb ... Unpacking qemu-slof (20161019+dfsg-1) ... Selecting previously unselected package openbios-ppc. Preparing to unpack .../07-openbios-ppc_1.1.git20161120-2_all.deb ... Unpacking openbios-ppc (1.1.git20161120-2) ... Selecting previously unselected package qemu-system-ppc. Preparing to unpack .../08-qemu-system-ppc_1%3a2.8+dfsg-6+deb9u17_amd64.deb ... Unpacking qemu-system-ppc (1:2.8+dfsg-6+deb9u17) ... Selecting previously unselected package openbios-sparc. Preparing to unpack .../09-openbios-sparc_1.1.git20161120-2_all.deb ... Unpacking openbios-sparc (1.1.git20161120-2) ... Selecting previously unselected package qemu-system-sparc. Preparing to unpack .../10-qemu-system-sparc_1%3a2.8+dfsg-6+deb9u17_amd64.deb ... Unpacking qemu-system-sparc (1:2.8+dfsg-6+deb9u17) ... Selecting previously unselected package qemu-system-misc. Preparing to unpack .../11-qemu-system-misc_1%3a2.8+dfsg-6+deb9u17_amd64.deb ... Unpacking qemu-system-misc (1:2.8+dfsg-6+deb9u17) ... Selecting previously unselected package qemu-system. Preparing to unpack .../12-qemu-system_1%3a2.8+dfsg-6+deb9u17_amd64.deb ... Unpacking qemu-system (1:2.8+dfsg-6+deb9u17) ... Selecting previously unselected package qemu-user. Preparing to unpack .../13-qemu-user_1%3a2.8+dfsg-6+deb9u17_amd64.deb ... Unpacking qemu-user (1:2.8+dfsg-6+deb9u17) ... Preparing to unpack .../14-qemu-utils_1%3a2.8+dfsg-6+deb9u17_amd64.deb ... Unpacking qemu-utils (1:2.8+dfsg-6+deb9u17) over (1:2.8+dfsg-6+deb9u4) ... Selecting previously unselected package qemu. Preparing to unpack .../15-qemu_1%3a2.8+dfsg-6+deb9u17_amd64.deb ... Unpacking qemu (1:2.8+dfsg-6+deb9u17) ... Selecting previously unselected package qemu-user-static. Preparing to unpack .../16-qemu-user-static_1%3a2.8+dfsg-6+deb9u17_amd64.deb ... Unpacking qemu-user-static (1:2.8+dfsg-6+deb9u17) ... Setting up openhackware (0.4.1+git-20140423.c559da7c-4) ... Setting up qemu-user (1:2.8+dfsg-6+deb9u17) ... Setting up openbios-sparc (1.1.git20161120-2) ... Setting up libpipeline1:amd64 (1.4.1-2) ... Setting up qemu-slof (20161019+dfsg-1) ... Setting up qemu-utils (1:2.8+dfsg-6+deb9u17) ... Setting up libxen-4.8:amd64 (4.8.5.final+shim4.10.4-1+deb9u12) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Setting up qemu-system-sparc (1:2.8+dfsg-6+deb9u17) ... Processing triggers for systemd (232-25+deb9u3) ... Setting up qemu-user-static (1:2.8+dfsg-6+deb9u17) ... mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. Setting up openbios-ppc (1.1.git20161120-2) ... Setting up qemu-system-misc (1:2.8+dfsg-6+deb9u17) ... Setting up qemu-system-arm (1:2.8+dfsg-6+deb9u17) ... Setting up binfmt-support (2.1.6-2) ... mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. mount: permission denied update-binfmts: warning: Couldn't mount the binfmt_misc filesystem on /proc/sys/fs/binfmt_misc. Created symlink /etc/systemd/system/multi-user.target.wants/binfmt-support.service → /lib/systemd/system/binfmt-support.service. invoke-rc.d: could not determine current runlevel invoke-rc.d: policy-rc.d denied execution of start. Setting up qemu-system-mips (1:2.8+dfsg-6+deb9u17) ... Setting up qemu-system-ppc (1:2.8+dfsg-6+deb9u17) ... Setting up qemu-system (1:2.8+dfsg-6+deb9u17) ... Setting up qemu (1:2.8+dfsg-6+deb9u17) ... Processing triggers for systemd (232-25+deb9u3) ... Removing intermediate container a380dcd05866 ---> 21f45fab88be Step 3/4 : COPY builder/ /builder/ ---> 37992ba51b63 Step 4/4 : CMD /builder/build.sh ---> [Warning] The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested ---> Running in 8bd0dd7fd6d5 Removing intermediate container 8bd0dd7fd6d5 ---> 4edc0a1097dc Successfully built 4edc0a1097dc Successfully tagged image-builder-rpi:latest docker run --rm --privileged -v /home/piuser/pi-builder:/workspace -v /boot:/boot -v /lib/modules:/lib/modules -e CIRCLE_TAG -e VERSION image-builder-rpi WARNING: The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested + '[' '!' -f /.dockerenv ']' + source /workspace/versions.config ++ HYPRIOT_OS_VERSION=v2.0.1 ++ ROOTFS_TAR_CHECKSUM=d1e7e6d48a25b4a206c5df99ecb8815388ec6945e4f97e78413d5a80778d4137 ++ RAW_IMAGE=rpi-raw.img ++ RAW_IMAGE_VERSION=v0.2.2 ++ RAW_IMAGE_CHECKSUM=2fbeb13b7b0f2308dbd0d82780b54c33003ad43d145ff08498b25fb8bbe1c2c6 ++ export KERNEL_BUILD=1.20190517-1 ++ KERNEL_BUILD=1.20190517-1 ++ export DOCKER_CE_CHANNEL=test ++ DOCKER_CE_CHANNEL=test ++ export DOCKER_CE_VERSION=5:19.03.0~2.2.rc2-0~raspbian-stretch ++ DOCKER_CE_VERSION=5:19.03.0~2.2.rc2-0~raspbian-stretch ++ export DOCKER_COMPOSE_VERSION=1.23.2 ++ DOCKER_COMPOSE_VERSION=1.23.2 ++ export DOCKER_MACHINE_VERSION=0.16.1 ++ DOCKER_MACHINE_VERSION=0.16.1 + BUILD_RESULT_PATH=/workspace + BUILD_PATH=/build + ROOTFS_TAR=rootfs-armhf-raspbian-v2.0.1.tar.gz + ROOTFS_TAR_PATH=/workspace/rootfs-armhf-raspbian-v2.0.1.tar.gz + echo CIRCLE_TAG= CIRCLE_TAG= + HYPRIOT_IMAGE_VERSION=dirty + HYPRIOT_IMAGE_NAME=hypriotos-rpi-dirty.img + export HYPRIOT_IMAGE_VERSION + rm -rf /build + mkdir /build + '[' '!' -f /workspace/rootfs-armhf-raspbian-v2.0.1.tar.gz ']' + wget -q -O /workspace/rootfs-armhf-raspbian-v2.0.1.tar.gz https://github.com/hypriot/os-rootfs/releases/download/v2.0.1/rootfs-armhf-raspbian-v2.0.1.tar.gz + sha256sum -c - + echo 'd1e7e6d48a25b4a206c5df99ecb8815388ec6945e4f97e78413d5a80778d4137 /workspace/rootfs-armhf-raspbian-v2.0.1.tar.gz' /workspace/rootfs-armhf-raspbian-v2.0.1.tar.gz: OK + tar xf /workspace/rootfs-armhf-raspbian-v2.0.1.tar.gz -C /build + update-binfmts --enable qemu-arm + mkdir -p /build/proc /build/sys /build/dev/pts + mount -o bind /dev /build/dev + mount -o bind /dev/pts /build/dev/pts + mount -t proc none /build/proc + mount -t sysfs none /build/sys + cp -R /builder/files/boot /builder/files/etc /builder/files/var /build/ + chroot /build /bin/bash chroot: failed to run command '/bin/bash': Exec format error make: *** [Makefile:7: sd-image] Error 126
The text was updated successfully, but these errors were encountered:
No branches or pull requests
when running make sd-image I'm getting this error.
Hardware Raspberry Pi 3B+
OS:
Raspbian OS 64 bit
The text was updated successfully, but these errors were encountered: