configs: enable driver for Vertexcom MSE102X

This is a SPI to powerline chipset with host-side Ethernet interface.
Is is usually used in e-mobility environments, e.g. on
Electrical Vehicle Supply Equipment (EVSE) side.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

Author: mhei

arch/arm/configs/bcm2709_defconfig

@@ -492,6 +492,7 @@ CONFIG_NET_VRF=m
 CONFIG_ENC28J60=m
 CONFIG_QCA7000_SPI=m
 CONFIG_QCA7000_UART=m
+CONFIG_MSE102X=m
 CONFIG_WIZNET_W5100=m
 CONFIG_WIZNET_W5100_SPI=m
 CONFIG_CAN_VCAN=m

arch/arm/configs/bcm2711_defconfig

@@ -510,6 +510,7 @@ CONFIG_LAN743X=m
 CONFIG_QCA7000_SPI=m
 CONFIG_QCA7000_UART=m
 CONFIG_R8169=m
+CONFIG_MSE102X=m
 CONFIG_WIZNET_W5100=m
 CONFIG_WIZNET_W5100_SPI=m
 CONFIG_MICREL_PHY=y

arch/arm/configs/bcmrpi_defconfig

@@ -486,6 +486,7 @@ CONFIG_NET_VRF=m
 CONFIG_ENC28J60=m
 CONFIG_QCA7000_SPI=m
 CONFIG_QCA7000_UART=m
+CONFIG_MSE102X=m
 CONFIG_WIZNET_W5100=m
 CONFIG_WIZNET_W5100_SPI=m
 CONFIG_CAN_VCAN=m

arch/arm64/configs/bcm2711_defconfig

@@ -540,6 +540,7 @@ CONFIG_LAN743X=m
 CONFIG_QCA7000_SPI=m
 CONFIG_QCA7000_UART=m
 CONFIG_R8169=m
+CONFIG_MSE102X=m
 CONFIG_WIZNET_W5100=m
 CONFIG_WIZNET_W5100_SPI=m
 CONFIG_MICREL_PHY=y

arch/arm64/configs/bcm2712_defconfig

@@ -543,6 +543,7 @@ CONFIG_LAN743X=m
 CONFIG_QCA7000_SPI=m
 CONFIG_QCA7000_UART=m
 CONFIG_R8169=m
+CONFIG_MSE102X=m
 CONFIG_WIZNET_W5100=m
 CONFIG_WIZNET_W5100_SPI=m
 CONFIG_MICREL_PHY=y

arch/arm64/configs/bcmrpi3_defconfig

@@ -500,6 +500,7 @@ CONFIG_VSOCKMON=m
 CONFIG_ENC28J60=m
 CONFIG_QCA7000_SPI=m
 CONFIG_QCA7000_UART=m
+CONFIG_MSE102X=m
 CONFIG_WIZNET_W5100=m
 CONFIG_WIZNET_W5100_SPI=m
 CONFIG_CAN_VCAN=m