cdcacm.h

/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.

This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").

Contact information
-------------------

Circuits At Home, LTD
Web      :  http://www.circuitsathome.com
e-mail   :  support@circuitsathome.com
 */
#if !defined(__CDCACM_H__)
#define __CDCACM_H__

#include "Usb.h"

#define bmREQ_CDCOUT                    USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE
#define bmREQ_CDCIN                     USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE

// CDC Subclass Constants
#define CDC_SUBCLASS_DLCM               0x01    // Direct Line Control Model
#define CDC_SUBCLASS_ACM                0x02    // Abstract Control Model
#define CDC_SUBCLASS_TCM                0x03    // Telephone Control Model
#define CDC_SUBCLASS_MCCM               0x04    // Multi Channel Control Model
#define CDC_SUBCLASS_CAPI               0x05    // CAPI Control Model
#define CDC_SUBCLASS_ETHERNET           0x06    // Ethernet Network Control Model
#define CDC_SUBCLASS_ATM                0x07    // ATM Network Control Model
#define CDC_SUBCLASS_WIRELESS_HANDSET   0x08    // Wireless Handset Control Model
#define CDC_SUBCLASS_DEVICE_MANAGEMENT  0x09    // Device Management
#define CDC_SUBCLASS_MOBILE_DIRECT_LINE 0x0A    // Mobile Direct Line Model
#define CDC_SUBCLASS_OBEX               0x0B    // OBEX
#define CDC_SUBCLASS_ETHERNET_EMU       0x0C    // Ethernet Emulation Model

// Communication Interface Class Control Protocol Codes
#define CDC_PROTOCOL_ITU_T_V_250        0x01    // AT Commands defined by ITU-T V.250
#define CDC_PROTOCOL_PCCA_101           0x02    // AT Commands defined by PCCA-101
#define CDC_PROTOCOL_PCCA_101_O         0x03    // AT Commands defined by PCCA-101 & Annex O
#define CDC_PROTOCOL_GSM_7_07           0x04    // AT Commands defined by GSM 7.07
#define CDC_PROTOCOL_3GPP_27_07         0x05    // AT Commands defined by 3GPP 27.007
#define CDC_PROTOCOL_C_S0017_0          0x06    // AT Commands defined by TIA for CDMA
#define CDC_PROTOCOL_USB_EEM            0x07    // Ethernet Emulation Model

// CDC Commands defined by CDC 1.2
#define CDC_SEND_ENCAPSULATED_COMMAND   0x00
#define CDC_GET_ENCAPSULATED_RESPONSE   0x01

// CDC Commands defined by PSTN 1.2
#define CDC_SET_COMM_FEATURE            0x02
#define CDC_GET_COMM_FEATURE            0x03
#define CDC_CLEAR_COMM_FEATURE          0x04
#define CDC_SET_AUX_LINE_STATE          0x10
#define CDC_SET_HOOK_STATE              0x11
#define CDC_PULSE_SETUP                 0x12
#define CDC_SEND_PULSE                  0x13
#define CDC_SET_PULSE_TIME              0x14
#define CDC_RING_AUX_JACK               0x15
#define CDC_SET_LINE_CODING             0x20
#define CDC_GET_LINE_CODING             0x21
#define CDC_SET_CONTROL_LINE_STATE      0x22
#define CDC_SEND_BREAK                  0x23
#define CDC_SET_RINGER_PARMS            0x30
#define CDC_GET_RINGER_PARMS            0x31
#define CDC_SET_OPERATION_PARMS         0x32
#define CDC_GET_OPERATION_PARMS         0x33
#define CDC_SET_LINE_PARMS              0x34
#define CDC_GET_LINE_PARMS              0x35
#define CDC_DIAL_DIGITS                 0x36

//Class-Specific Notification Codes
#define NETWORK_CONNECTION              0x00
#define RESPONSE_AVAILABLE              0x01
#define AUX_JACK_HOOK_STATE             0x08
#define RING_DETECT                     0x09
#define SERIAL_STATE                    0x20
#define CALL_STATE_CHANGE               0x28
#define LINE_STATE_CHANGE               0x29
#define CONNECTION_SPEED_CHANGE         0x2a

// CDC Functional Descriptor Structures

typedef struct {
        uint8_t bFunctionLength;
        uint8_t bDescriptorType;
        uint8_t bDescriptorSubtype;
        uint8_t bmCapabilities;
        uint8_t bDataInterface;
} CALL_MGMNT_FUNC_DESCR;

typedef struct {
        uint8_t bFunctionLength;
        uint8_t bDescriptorType;
        uint8_t bDescriptorSubtype;
        uint8_t bmCapabilities;
} ACM_FUNC_DESCR, DLM_FUNC_DESCR, TEL_OPER_MODES_FUNC_DESCR,
TEL_CALL_STATE_REP_CPBL_FUNC_DESCR;

typedef struct {
        uint8_t bFunctionLength;
        uint8_t bDescriptorType;
        uint8_t bDescriptorSubtype;
        uint8_t bRingerVolSteps;
        uint8_t bNumRingerPatterns;
} TEL_RINGER_FUNC_DESCR;

typedef struct {
        uint32_t dwDTERate; // Data Terminal Rate in bits per second
        uint8_t bCharFormat; // 0 - 1 stop bit, 1 - 1.5 stop bits, 2 - 2 stop bits
        uint8_t bParityType; // 0 - None, 1 - Odd, 2 - Even, 3 - Mark, 4 - Space
        uint8_t bDataBits; // Data bits (5, 6, 7, 8 or 16)
} LINE_CODING;

typedef struct {
        uint8_t bmRequestType; // 0xa1 for class-specific notifications
        uint8_t bNotification;
        uint16_t wValue;
        uint16_t wIndex;
        uint16_t wLength;
        uint16_t bmState; //UART state bitmap for SERIAL_STATE, other notifications variable length
} CLASS_NOTIFICATION;

class ACM;

class CDCAsyncOper {
public:

        virtual uint8_t OnInit(ACM *pacm __attribute__((unused))) {
                return 0;
        };
        //virtual void OnDataRcvd(ACM *pacm, uint8_t nbytes, uint8_t *dataptr) = 0;
        //virtual void OnDisconnected(ACM *pacm) = 0;
};

/**
 * This structure is used to report the extended capabilities of the connected device.
 * It is also used to report the current status.
 * Regular CDC-ACM reports all as false.
 */
typedef struct {

        union {
                uint8_t tty;

                struct {
                        bool enhanced : 1; // Do we have the ability to set/clear any features?
                        // Status and 8th bit in data stream.
                        // Presence only indicates feature is available, but this isn't used for CDC-ACM.
                        bool wide : 1;
                        bool autoflow_RTS : 1; // Has autoflow on RTS/CTS
                        bool autoflow_DSR : 1; // Has autoflow on DTR/DSR
                        bool autoflow_XON : 1; // Has autoflow  XON/XOFF
                        bool half_duplex : 1;  // Has half-duplex capability.
                } __attribute__((packed));
        };
} tty_features;

#define ACM_MAX_ENDPOINTS               4

class ACM : public USBDeviceConfig, public UsbConfigXtracter {
protected:
        USB *pUsb;
        CDCAsyncOper *pAsync;
        uint8_t bAddress;
        uint8_t bConfNum; // configuration number
        uint8_t bControlIface; // Control interface value
        uint8_t bDataIface; // Data interface value
        uint8_t bNumEP; // total number of EP in the configuration
        uint32_t qNextPollTime; // next poll time
        volatile bool bPollEnable; // poll enable flag
        volatile bool ready; //device ready indicator
        tty_features _enhanced_status; // current status

        void PrintEndpointDescriptor(const USB_ENDPOINT_DESCRIPTOR* ep_ptr);

public:
        static const uint8_t epDataInIndex; // DataIn endpoint index
        static const uint8_t epDataOutIndex; // DataOUT endpoint index
        static const uint8_t epInterruptInIndex; // InterruptIN  endpoint index
        EpInfo epInfo[ACM_MAX_ENDPOINTS];

        ACM(USB *pusb, CDCAsyncOper *pasync);

        uint8_t SetCommFeature(uint16_t fid, uint8_t nbytes, uint8_t *dataptr);
        uint8_t GetCommFeature(uint16_t fid, uint8_t nbytes, uint8_t *dataptr);
        uint8_t ClearCommFeature(uint16_t fid);
        uint8_t SetLineCoding(const LINE_CODING *dataptr);
        uint8_t GetLineCoding(LINE_CODING *dataptr);
        uint8_t SetControlLineState(uint8_t state);
        uint8_t SendBreak(uint16_t duration);
        uint8_t GetNotif(uint16_t *bytes_rcvd, uint8_t *dataptr);

        // Methods for receiving and sending data
        uint8_t RcvData(uint16_t *nbytesptr, uint8_t *dataptr);
        uint8_t SndData(uint16_t nbytes, uint8_t *dataptr);

        // USBDeviceConfig implementation
        uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed);
        uint8_t Release();
        uint8_t Poll();

        bool available(void) {
                return false;
        };

        virtual uint8_t GetAddress() {
                return bAddress;
        };

        virtual bool isReady() {
                return ready;
        };

        virtual tty_features enhanced_status(void) {
                return _enhanced_status;
        };

        virtual tty_features enhanced_features(void) {
                tty_features rv;
                rv.enhanced = false;
                rv.autoflow_RTS = false;
                rv.autoflow_DSR = false;
                rv.autoflow_XON = false;
                rv.half_duplex = false;
                rv.wide = false;
                return rv;
        };

        virtual void autoflowRTS(bool s __attribute__((unused))) {
        };

        virtual void autoflowDSR(bool s __attribute__((unused))) {
        };

        virtual void autoflowXON(bool s __attribute__((unused))) {
        };

        virtual void half_duplex(bool s __attribute__((unused))) {
        };

        virtual void wide(bool s __attribute__((unused))) {
        };

        // UsbConfigXtracter implementation
        void EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto, const USB_ENDPOINT_DESCRIPTOR *ep);
};

#endif // __CDCACM_H__