makefile.linaro

#
# Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# Redistributions of source code must retain the above copyright notice, this
# list of conditions and the following disclaimer.
#
# Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# Neither the name of ARM nor the names of its contributors may be used
# to endorse or promote products derived from this software without specific
# prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#

#/* Select BOARD("HIHOPE"or"EK874" )**************
ifeq ("$(BOARD)", "")
BOARD = HIHOPE
endif

#/* Select USB("ENABLE"or"DISABLE" )********************************************
ifeq ("$(USB)", "")
ifeq ("$(BOARD)", "EK874")
USB = DISABLE
else
USB = ENABLE
endif
endif

#/* Select BOOT("WRITER"or"WRITER_WITH_CERT" )*************************
ifeq ("$(BOOT)", "")
BOOT = WRITER_WITH_CERT
endif

#/* Select SERIAL_FLASH("ENABLE"or"DISABLE" )***********************************
ifeq ("$(SERIAL_FLASH)", "")
SERIAL_FLASH = ENABLE
endif

#/* Select EMMC("ENABLE"or"DISABLE" )*******************************************
ifeq ("$(EMMC)", "")
ifeq ("$(BOARD)", "EK874")
EMMC = DISABLE
else
EMMC = ENABLE
endif
endif

#CPU
CPU     =
AArch   = 64
THUMB   =
AS_NEON =
CC_NEON = -mgeneral-regs-only
ALIGN   = -mstrict-align
AArch32_64  = AArch64
BOOTDIR     = AArch64_boot
OUTPUT_DIR  = AArch64_output
OBJECT_DIR  = AArch64_obj
CROSS_COMPILE ?= aarch64-elf-
CFLAGS = -fno-stack-protector -ffunction-sections -fdata-sections

ifeq ("$(BOARD)", "EK874")
	BOARD_NAME   =  EK874
	FILENAME_ADD = _ek874
	CFLAGS += -DRZG2_EK874=1
else
	BOARD_NAME   =  HIHOPE
	FILENAME_ADD = _hihope
	CFLAGS += -DRZG2_HIHOPE=1
endif

ifeq ("$(BOOT)", "WRITER")
	BOOT_DEF    = Writer
	FILE_NAME   = $(OUTPUT_DIR)/AArch$(AArch)_Flash_writer_SCIF_E6304000$(FILENAME_ADD)
ifeq ("$(BOARD)", "EK874")
	MEMORY_DEF = memory_writer_small.def
else
	MEMORY_DEF = memory_writer.def
endif
endif

ifeq ("$(BOOT)", "WRITER_WITH_CERT")
	BOOT_DEF    = Writer
	FILE_NAME   = $(OUTPUT_DIR)/AArch$(AArch)_Flash_writer_SCIF_DUMMY_CERT_E6300400$(FILENAME_ADD)
ifeq ("$(BOARD)", "EK874")
	MEMORY_DEF  = memory_writer_small_with_cert.def
else
	MEMORY_DEF  = memory_writer_with_cert.def
endif
endif

ifeq ("$(USB)", "ENABLE")
        CFLAGS += -DUSB_ENABLE=1
endif

ifeq ("$(USB)", "DISABLE")
        CFLAGS += -DUSB_ENABLE=0
endif

ifeq ("$(SERIAL_FLASH)", "ENABLE")
	CFLAGS += -DSERIAL_FLASH=1
else
	CFLAGS += -DSERIAL_FLASH=0
endif

ifeq ("$(EMMC)", "ENABLE")
	CFLAGS += -DEMMC=1
else
	CFLAGS += -DEMMC=0
endif

DDR_DEF = ddr_qos_init_setting

ifeq ("$(USB)", "ENABLE")
LIBS        += -L./AArch64_lib/ -lusb
endif

INCLUDE_DIR = include
DDR_DIR = ddr
TOOL_DEF = "REWRITE_TOOL"

OUTPUT_FILE = $(FILE_NAME).axf

#Object file
OBJ_FILE_BOOT =					\
	$(OBJECT_DIR)/boot_mon.o		\
	$(OBJECT_DIR)/stack.o

SRC_FILE :=					\
	main.c					\
	init_scif.c				\
	scifdrv.c				\
	devdrv.c				\
	common.c				\
	dgtable.c				\
	dgmodul1.c				\
	Message.c				\
	dmaspi.c				\
	ramckmdl.c				\
	cpudrv.c				\
	boardid.c				\
	boot_init_lbsc.c			\
	boot_init_port.c			\
	boot_init_gpio.c			\
	micro_wait.c				\
	ddrcheck.c

ifeq ("$(SERIAL_FLASH)", "ENABLE")
SRC_FILE +=					\
	dgmodul4.c				\
	rpcqspidrv.c				\
	spiflash1drv.c
endif

ifeq ("$(EMMC)", "ENABLE")
SRC_FILE +=					\
	dg_emmc_config.c			\
	dg_emmc_access.c			\
	emmc_cmd.c				\
	emmc_init.c				\
	emmc_interrupt.c			\
	emmc_mount.c				\
	emmc_write.c				\
	emmc_erase.c				\
	emmc_utility.c
endif

ifeq ("$(BOOT)", "WRITER_WITH_CERT")
	SRC_FILE += cert_param.c
endif

ifeq ("$(BOARD)", "EK874")
include ddr/ddr3l/ddr.mk
else
include ddr/lpddr4/ddr.mk
endif

include security/secprv.mk

OBJ_FILE := $(addprefix $(OBJECT_DIR)/,$(patsubst %.c,%.o,$(SRC_FILE)))

#Dependency File
DEPEND_FILE = $(patsubst %.lib, ,$(OBJ_FILE:%.o=%.d))

###################################################
#C compiler
CC = $(CROSS_COMPILE)gcc
#Assembler
AS = $(CROSS_COMPILE)as
#Linker
LD = $(CROSS_COMPILE)ld
#Liblary
AR = $(CROSS_COMPILE)ar
#Object dump
OBJDUMP = $(CROSS_COMPILE)objdump
#Object copy
OBJCOPY = $(CROSS_COMPILE)objcopy

#clean
CL = rm -rf

###################################################
# Suffixes
.SUFFIXES : .s .c .o

###################################################
# Command

.PHONY: all
all: $(OBJECT_DIR) $(OUTPUT_DIR) $(OBJ_FILE_BOOT) $(OBJ_FILE) $(OUTPUT_FILE)

#------------------------------------------
# Make Directory
#------------------------------------------
$(OBJECT_DIR):
	-mkdir "$(OBJECT_DIR)"

$(OUTPUT_DIR):
	-mkdir "$(OUTPUT_DIR)"

#------------------------------------------
# Compile
#------------------------------------------
$(OBJECT_DIR)/%.o:$(BOOTDIR)/%.s
	$(AS)  -g $(CPU) $(AS_NEON) --MD $(patsubst %.o,%.d,$@) -I $(BOOTDIR) -I $(INCLUDE_DIR) -I $(DDR_DIR) $< -o $@ --defsym $(AArch32_64)=0 --defsym $(BOOT_DEF)=0 --defsym $(TOOL_DEF)=0

$(OBJECT_DIR)/%.o:%.c
	@if [ ! -e `dirname $@` ]; then mkdir -p `dirname $@`; fi
	$(CC) -g -Os $(ALIGN) $(CPU) $(CC_NEON) $(THUMB) -MMD -MP -c -I $(BOOTDIR) -I $(INCLUDE_DIR) -I $(DDR_DIR) $< -o $@ -D$(AArch32_64)=0 -D$(BOOT_DEF)=0 -D$(TOOL_DEF)=0 $(CFLAGS) -D$(DDR_DEF)=0

#------------------------------------------
# Linker
#------------------------------------------
$(OUTPUT_FILE): $(OBJ_FILE_BOOT) $(OBJ_FILE) $(MEMORY_DEF)
	$(LD) $(OBJ_FILE_BOOT) $(OBJ_FILE) 	\
	-T '$(MEMORY_DEF)'			\
	-o '$(OUTPUT_FILE)'			\
	-Map '$(FILE_NAME).map' 		\
	-static -nostdlib --gc-sections	\
	$(LIBS)

#   Make MOT file
	$(OBJCOPY) -O srec --srec-forceS3 "$(OUTPUT_FILE)" "$(FILE_NAME).mot"

#   Make Binary file
	$(OBJCOPY) -O binary "$(OUTPUT_FILE)" "$(FILE_NAME).bin"

#   Dis assemble
	$(OBJDUMP) -d -S "$(OUTPUT_FILE)" > "$(FILE_NAME)_disasm.txt"

#	Time Stamp
	@echo ==========  `date`  ==========
	@echo ========== !!! Compile Complete !!! ==========


.PHONY: clean
clean:
	$(CL)  $(OBJECT_DIR)/* $(OUTPUT_DIR)/*

-include $(DEPEND_FILE)