Skip to content

Latest commit

 

History

History
281 lines (198 loc) · 8.06 KB

set-up-git.md

File metadata and controls

281 lines (198 loc) · 8.06 KB
Raw

Configure Git for contributing

Work through this page to configure Git and a repository you'll use throughout the Contributor Guide. The work you do further in the guide, depends on the work you do here.

Task 1. Fork and clone the Moby code

Before contributing, you first fork the Moby code repository. A fork copies a repository at a particular point in time. GitHub tracks for you where a fork originates.

As you make contributions, you change your fork's code. When you are ready, you make a pull request back to the original Docker repository. If you aren't familiar with this workflow, don't worry, this guide walks you through all the steps.

To fork and clone Moby:

  1. Open a browser and log into GitHub with your account.

  2. Go to the moby/moby repository.

  3. Click the "Fork" button in the upper right corner of the GitHub interface.

    Branch Signature

    GitHub forks the repository to your GitHub account. The original moby/moby repository becomes a new fork YOUR_ACCOUNT/moby under your account.

  4. Copy your fork's clone URL from GitHub.

    GitHub allows you to use HTTPS or SSH protocols for clones. You can use the git command line or clients like Subversion to clone a repository.

    Copy clone URL

    This guide assume you are using the HTTPS protocol and the git command line. If you are comfortable with SSH and some other tool, feel free to use that instead. You'll need to convert what you see in the guide to what is appropriate to your tool.

  5. Open a terminal window on your local host and change to your home directory.

    $ cd ~

    In Windows, you'll work in your Docker Quickstart Terminal window instead of Powershell or a cmd window.

  6. Create a repos directory.

    $ mkdir repos

  7. Change into your repos directory.

    $ cd repos

  8. Clone the fork to your local host into a repository called moby-fork.

    $ git clone https://github.com/YOUR_ACCOUNT/moby.git moby-fork

    In the command above replace YOUR_ACCOUNT with your GitHub username. Naming your local repo moby-fork should help make these instructions easier to follow; experienced coders don't typically change the name.

  9. Change directory into your new moby-fork directory.

    $ cd moby-fork

    Take a moment to familiarize yourself with the repository's contents. List the contents.

Task 2. Set your signature and an upstream remote

When you contribute to Docker, you must certify you agree with the Developer Certificate of Origin. You indicate your agreement by signing your git commits like this:

Signed-off-by: Pat Smith <pat.smith@email.com>

To create a signature, you configure your username and email address in Git. You can set these globally or locally on just your moby-fork repository. You must sign with your real name. You can sign your git commit automatically with git commit -s. Moby does not accept anonymous contributions or contributions through pseudonyms.

As you change code in your fork, you'll want to keep it in sync with the changes others make in the moby/moby repository. To make syncing easier, you'll also add a remote called upstream that points to moby/moby. A remote is just another project version hosted on the internet or network.

To configure your username, email, and add a remote:

  1. Change to the root of your moby-fork repository.

    $ cd moby-fork

  2. Set your user.name for the repository.

    $ git config --local user.name "FirstName LastName"

  3. Set your user.email for the repository.

    $ git config --local user.email "emailname@mycompany.com"

  4. Set your local repo to track changes upstream, on the moby/moby repository.

    $ git remote add upstream https://github.com/moby/moby.git

  5. Check the result in your git configuration.

    $ git config --local -l
core.repositoryformatversion=0
core.filemode=true
core.bare=false
core.logallrefupdates=true
remote.origin.url=https://github.com/moxiegirl/moby.git
remote.origin.fetch=+refs/heads/*:refs/remotes/origin/*
branch.master.remote=origin
branch.master.merge=refs/heads/master
user.name=Mary Anthony
user.email=mary@docker.com
remote.upstream.url=https://github.com/moby/moby.git
remote.upstream.fetch=+refs/heads/*:refs/remotes/upstream/*

    To list just the remotes use:

    $ git remote -v
origin	https://github.com/moxiegirl/moby.git (fetch)
origin	https://github.com/moxiegirl/moby.git (push)
upstream https://github.com/moby/moby.git (fetch)
upstream https://github.com/moby/moby.git (push)

Task 3. Create and push a branch

As you change code in your fork, make your changes on a repository branch. The branch name should reflect what you are working on. In this section, you create a branch, make a change, and push it up to your fork.

This branch is just for testing your config for this guide. The changes are part of a dry run, so the branch name will be dry-run-test. To create and push the branch to your fork on GitHub:

  1. Open a terminal and go to the root of your moby-fork.

    $ cd moby-fork

  2. Create a dry-run-test branch.

    $ git checkout -b dry-run-test

    This command creates the branch and switches the repository to it.

  3. Verify you are in your new branch.

    $ git branch
* dry-run-test
  master

    The current branch has an * (asterisk) marker. So, these results show you are on the right branch.

  4. Create a TEST.md file in the repository's root.

    $ touch TEST.md

  5. Edit the file and add your email and location.

    Add your information

    You can use any text editor you are comfortable with.

  6. Save and close the file.

  7. Check the status of your branch.

    $ git status
On branch dry-run-test
Untracked files:
  (use "git add <file>..." to include in what will be committed)

    TEST.md

nothing added to commit but untracked files present (use "git add" to track)

    You've only changed the one file. It is untracked so far by git.

  8. Add your file.

    $ git add TEST.md

    That is the only staged file. Stage is fancy word for work that Git is tracking.

  9. Sign and commit your change.

    $ git commit -s -m "Making a dry run test."
[dry-run-test 6e728fb] Making a dry run test
 1 file changed, 1 insertion(+)
 create mode 100644 TEST.md

    Commit messages should have a short summary sentence of no more than 50 characters. Optionally, you can also include a more detailed explanation after the summary. Separate the summary from any explanation with an empty line.

  10. Push your changes to GitHub.

    $ git push --set-upstream origin dry-run-test
Username for 'https://github.com': moxiegirl
Password for 'https://moxiegirl@github.com':

    Git prompts you for your GitHub username and password. Then, the command returns a result.

    Counting objects: 13, done.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 320 bytes | 0 bytes/s, done.
Total 3 (delta 1), reused 0 (delta 0)
To https://github.com/moxiegirl/moby.git
 * [new branch]      dry-run-test -> dry-run-test
Branch dry-run-test set up to track remote branch dry-run-test from origin.

  11. Open your browser to GitHub.

  12. Navigate to your Moby fork.

  13. Make sure the dry-run-test branch exists, that it has your commit, and the commit is signed.

    Branch Signature

Where to go next

Congratulations, you have finished configuring both your local host environment and Git for contributing. In the next section you'll learn how to set up and work in a Moby development container.