You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
//Here is my command and the outputs to the screen:
[tmp@localhost riscv]$ sudo ./qemu/build/qemu-system-riscv64 -cpu rv64 -M virt -m 512M -nographic -kernel ./build-riscv64/arch/riscv/boot/Image -initrd ./rootfs_kvm_riscv64.img -append "root=/dev/ram rw console=ttyS0 earlycon=sbi"
[sudo] password for tmp:
Boot HART ID : 0
Boot HART Domain : root
Boot HART Priv Version : v1.12
Boot HART Base ISA : rv64imafdch
Boot HART ISA Extensions : sstc,zicntr,zihpm,zicboz,zicbom
Boot HART PMP Count : 16
Boot HART PMP Granularity : 2 bits
Boot HART PMP Address Bits: 54
Boot HART MHPM Info : 16 (0x0007fff8)
Boot HART MIDELEG : 0x0000000000001666
Boot HART MEDELEG : 0x0000000000f0b509
sbi_hsm_hart_start_finish: ERR: The hart is in invalid state [2147774600] <--- stuck here
//here is all the component I have downloaded and compiled without errors.
[tmp@localhost riscv]$ ls
build-riscv64 busybox-1.33.1-kvm-riscv64 busybox-1.33.1.tar.bz2 dtc howto kvmtool linux nohup.out qemu rootfs_kvm_riscv64.img
[tmp@localhost riscv]$
The text was updated successfully, but these errors were encountered:
I followed this link https://github.com/kvm-riscv/howto/wiki/KVM-RISCV64-on-QEMU to start a emulated riscv host, but it failed with "sbi_hsm_hart_start_finish: ERR: The hart is in invalid state [2147774600]"
//Here is my command and the outputs to the screen:
[tmp@localhost riscv]$ sudo ./qemu/build/qemu-system-riscv64 -cpu rv64 -M virt -m 512M -nographic -kernel ./build-riscv64/arch/riscv/boot/Image -initrd ./rootfs_kvm_riscv64.img -append "root=/dev/ram rw console=ttyS0 earlycon=sbi"
[sudo] password for tmp:
OpenSBI v1.4
/ __ \ / | _ _ |
| | | | __ ___ _ __ | ( | |) || |
| | | | '_ \ / _ \ '_ \ ___ | _ < | |
| || | |) | __/ | | |) | |) || |
_/| ./ _|| ||/|____/|
| |
|_|
Platform Name : riscv-virtio,qemu
Platform Features : medeleg
Platform HART Count : 1
Platform IPI Device : aclint-mswi
Platform Timer Device : aclint-mtimer @ 10000000Hz
Platform Console Device : uart8250
Platform HSM Device : ---
Platform PMU Device : ---
Platform Reboot Device : syscon-reboot
Platform Shutdown Device : syscon-poweroff
Platform Suspend Device : ---
Platform CPPC Device : ---
Firmware Base : 0x80000000
Firmware Size : 323 KB
Firmware RW Offset : 0x40000
Firmware RW Size : 67 KB
Firmware Heap Offset : 0x48000
Firmware Heap Size : 35 KB (total), 2 KB (reserved), 9 KB (used), 23 KB (free)
Firmware Scratch Size : 4096 B (total), 328 B (used), 3768 B (free)
Runtime SBI Version : 2.0
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000000100000-0x0000000000100fff M: (I,R,W) S/U: (R,W)
Domain0 Region01 : 0x0000000010000000-0x0000000010000fff M: (I,R,W) S/U: (R,W)
Domain0 Region02 : 0x0000000002000000-0x000000000200ffff M: (I,R,W) S/U: ()
Domain0 Region03 : 0x0000000080040000-0x000000008005ffff M: (R,W) S/U: ()
Domain0 Region04 : 0x0000000080000000-0x000000008003ffff M: (R,X) S/U: ()
Domain0 Region05 : 0x000000000c400000-0x000000000c5fffff M: (I,R,W) S/U: (R,W)
Domain0 Region06 : 0x000000000c000000-0x000000000c3fffff M: (I,R,W) S/U: (R,W)
Domain0 Region07 : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X)
Domain0 Next Address : 0x0000000080200000
Domain0 Next Arg1 : 0x000000009fe00000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Domain0 SysSuspend : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART Priv Version : v1.12
Boot HART Base ISA : rv64imafdch
Boot HART ISA Extensions : sstc,zicntr,zihpm,zicboz,zicbom
Boot HART PMP Count : 16
Boot HART PMP Granularity : 2 bits
Boot HART PMP Address Bits: 54
Boot HART MHPM Info : 16 (0x0007fff8)
Boot HART MIDELEG : 0x0000000000001666
Boot HART MEDELEG : 0x0000000000f0b509
sbi_hsm_hart_start_finish: ERR: The hart is in invalid state [2147774600] <--- stuck here
//here is all the component I have downloaded and compiled without errors.
[tmp@localhost riscv]$ ls
build-riscv64 busybox-1.33.1-kvm-riscv64 busybox-1.33.1.tar.bz2 dtc howto kvmtool linux nohup.out qemu rootfs_kvm_riscv64.img
[tmp@localhost riscv]$
The text was updated successfully, but these errors were encountered: