Skip to content

Latest commit

 

History

History
68 lines (48 loc) · 2.48 KB

File metadata and controls

68 lines (48 loc) · 2.48 KB

ROS client for Roboception's SilhouetteMatch module

This package is not developed anymore. A new client is available in the rc_reason_clients_ros repository.

This node provides ROS services and parameters for Roboception's SilhouetteMatch node. For a detailed description of the SilhouetteMatch module, check the rc_visard manual: https://doc.rc-visard.com/latest/en/silhouettematch.html.

Installation

On Debian/Ubuntu add the ROS sources and

sudo apt-get install ros-${ROS_DISTRO}-rc-silhouettematch-client

From Source

This package relies on git submodules for the cpr library which need to be initialized before building from source.

git submodule update --init --recursive

Configuration

Parameters

  • device: The ID of the device, i.e. Roboception rc_visard sensor. This can be either:
    • serial number, e.g. 02912345. IMPORTANT: preceed with a colon (:02912345) when passing this on the command line or setting it via rosparam (see ros/ros_comm#1339). This is not neccessary when specifying it as a string in a launch file.
    • user defined name (factory default is the name of the rc_visard's model), must be unique among all reachable sensors.
  • host: If device is not used: The IP address or hostname of the rc_visard.

Dynamic reconfigure parameters

  • max_number_of_detected_objects: Maximum number of detected objects.
  • edge_sensitivity: Sensitivity of the edge detector.
  • match_max_distance: Maximum allowed distance in pixels between the template and the detected edges in the image.
  • match_percentile: Percentage of template pixels that must be within the maximum distance to successfully match the template.
  • quality: Detection quality (H(igh), M(edium), or L(ow)).
  • publish_vis: Whether TF and markers should be published.

Services

The following services are offered by the node:

  • detect_object: Triggers detection of an object.
  • calibrate_base_plane: Triggers base-plane calibration.
  • get_base_plane_calibration: Returns the configured base-plane calibration.
  • delete_base_plane_calibration: Deletes the configured base-plane calibration.

Launching

Using command line parameters:

rosrun rc_silhouettematch_client rc_silhouettematch_client _device:=:<serial_number>