Right prompt and node version not showing

[bit-bique]

I following from these steps #373
I saw configuration wizard has right prompt
but after I installed powerlevel10k from configuration wizard, it not show the right prompt.

How can I do that? please
I want to show node_version in the right prompt

here is my .zshrc config

# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
# Initialization code that may require console input (password prompts, [y/n]
# confirmations, etc.) must go above this block; everything else may go below.
if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
fi

# If you come from bash you might have to change your $PATH.
# export PATH=$HOME/bin:/usr/local/bin:$PATH

# Path to your oh-my-zsh installation.
export ZSH="$HOME/.oh-my-zsh"
export PATH=/opt/homebrew/bin:$PATH
# export PATH="$PATH:/opt/homebrew/bin/"

# Set name of the theme to load --- if set to "random", it will
# load a random theme each time oh-my-zsh is loaded, in which case,
# to know which specific one was loaded, run: echo $RANDOM_THEME
# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
ZSH_THEME="robbyrussell"

# The list of segments shown on the right.
typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
  nodenv          # node.js version from nodenv (https://github.com/nodenv/nodenv)
  nvm             # node.js version from nvm (https://github.com/nvm-sh/nvm)
  nodeenv         # node.js environment (https://github.com/ekalinin/nodeenv)
  node_version    # node.js version
)
POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS+=node_version
typeset -g POWERLEVEL9K_NODENV_PROMPT_ALWAYS_SHOW=true
typeset -g POWERLEVEL9K_NODEENV_SHOW_NODE_VERSION=true

# Set list of themes to pick from when loading at random
# Setting this variable when ZSH_THEME=random will cause zsh to load
# a theme from this variable instead of looking in $ZSH/themes/
# If set to an empty array, this variable will have no effect.
# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )

# Uncomment the following line to use case-sensitive completion.
# CASE_SENSITIVE="true"

# Uncomment the following line to use hyphen-insensitive completion.
# Case-sensitive completion must be off. _ and - will be interchangeable.
# HYPHEN_INSENSITIVE="true"

# Uncomment one of the following lines to change the auto-update behavior
# zstyle ':omz:update' mode disabled  # disable automatic updates
# zstyle ':omz:update' mode auto      # update automatically without asking
# zstyle ':omz:update' mode reminder  # just remind me to update when it's time

# Uncomment the following line to change how often to auto-update (in days).
# zstyle ':omz:update' frequency 13

# Uncomment the following line if pasting URLs and other text is messed up.
# DISABLE_MAGIC_FUNCTIONS="true"

# Uncomment the following line to disable colors in ls.
# DISABLE_LS_COLORS="true"

# Uncomment the following line to disable auto-setting terminal title.
# DISABLE_AUTO_TITLE="true"

# Uncomment the following line to enable command auto-correction.
# ENABLE_CORRECTION="true"

# Uncomment the following line to display red dots whilst waiting for completion.
# You can also set it to another string to have that shown instead of the default red dots.
# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
# COMPLETION_WAITING_DOTS="true"

# Uncomment the following line if you want to disable marking untracked files
# under VCS as dirty. This makes repository status check for large repositories
# much, much faster.
# DISABLE_UNTRACKED_FILES_DIRTY="true"

# Uncomment the following line if you want to change the command execution time
# stamp shown in the history command output.
# You can set one of the optional three formats:
# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
# or set a custom format using the strftime function format specifications,
# see 'man strftime' for details.
# HIST_STAMPS="mm/dd/yyyy"

# Would you like to use another custom folder than $ZSH/custom?
# ZSH_CUSTOM=/path/to/new-custom-folder

# Which plugins would you like to load?
# Standard plugins can be found in $ZSH/plugins/
# Custom plugins may be added to $ZSH_CUSTOM/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
plugins=(git)

source $ZSH/oh-my-zsh.sh
source /usr/local/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh

# User configuration

# export MANPATH="/usr/local/man:$MANPATH"

# You may need to manually set your language environment
# export LANG=en_US.UTF-8

# Preferred editor for local and remote sessions
# if [[ -n $SSH_CONNECTION ]]; then
#   export EDITOR='vim'
# else
#   export EDITOR='mvim'
# fi

# Compilation flags
# export ARCHFLAGS="-arch x86_64"

# Set personal aliases, overriding those provided by oh-my-zsh libs,
# plugins, and themes. Aliases can be placed here, though oh-my-zsh
# users are encouraged to define aliases within the ZSH_CUSTOM folder.
# For a full list of active aliases, run `alias`.
#
# Example aliases
# alias zshconfig="mate ~/.zshrc"
# alias ohmyzsh="mate ~/.oh-my-zsh"
alias py3="python3"
alias zshrc="code ~/.zshrc"

source ~/powerlevel10k/powerlevel10k.zsh-theme

RPROMPT="%{$fg[yellow]%}"
ZSH_HIGHLIGHT_HIGHLIGHTERS=(main brackets pattern cursor)

ZSH_HIGHLIGHT_PATTERNS=('rm -rf *' 'fg=white,bold,bg=red') # To have commands starting with `rm -rf` in red:

# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh

export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"  # This loads nvm
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion"  # This loads nvm bash_completion

[romkatv]

You need to do two things.

1. Remove this whole block from ~/.zshrc:

   # Set name of the theme to load --- if set to "random", it will
   # load a random theme each time oh-my-zsh is loaded, in which case,
   # to know which specific one was loaded, run: echo $RANDOM_THEME
   # See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
   ZSH_THEME="robbyrussell"
   
   # The list of segments shown on the right.
   typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
     nodenv          # node.js version from nodenv (https://github.com/nodenv/nodenv)
     nvm             # node.js version from nvm (https://github.com/nvm-sh/nvm)
     nodeenv         # node.js environment (https://github.com/ekalinin/nodeenv)
     node_version    # node.js version
   )
   POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS+=node_version
   typeset -g POWERLEVEL9K_NODENV_PROMPT_ALWAYS_SHOW=true
   typeset -g POWERLEVEL9K_NODEENV_SHOW_NODE_VERSION=true

2. Open ~/.p10k.zsh search for node_version and uncomment the first hit.

[bit-bique]

Thanks!