forked from Mellanox/libvma
-
Notifications
You must be signed in to change notification settings - Fork 0
/
README.txt
1165 lines (998 loc) · 55.7 KB
/
README.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
Update: 07 Nov 2017
Introduction
============
Mellanox's Messaging Accelerator (VMA) is dynamically linked user space Linux
library for transparently enhancing the performance of networking-heavy
applications. It boosts performance for message-based and streaming applications
such as those found in financial services market data environments and Web2.0
clusters.
It allows application written over standard socket API to run over Infiniband
and/or Ethernet from user-space with full network stack bypass.
The result is a reduction in latency by as much as 300%,
an increase in application throughput by as much as 200%,
higher packets rates and better CPU utilization as compared to applications
running on standard Ethernet or InfiniBand interconnect networks.
Build libvma from source
========================
Prerequisites:
1. MLNX_OFED as described in the "Pre Installation" step of next section.
2. Or, upstream kernel and userspace verbs libraries (libibverbs, libmlx4, librdmacm)
3. Autoconf, Automake, libtool, unzip, patch, libnl-devel (netlink 1 or 3)
Build:
1. ./autogen.sh
2. ./configure --with-ofed=/usr --prefix=/usr --libdir=/usr/lib64 --includedir=/usr/include/mellanox --docdir=/usr/share/doc/libvma --sysconfdir=/etc
3. make
You will find libvma.so in path_to_vma_dir/src/vma/.libs/libvma.so.
Install:
1. sudo make install
Tip:
./install.sh can do the build and install steps for you.
Install libvma from rpm or debian
=================================
Pre Installation:
1. If possible, install latest MLNX_OFED with the --vma option.
This will also install libvma, and you can skip to "Running" step.
2. If installing over existing MLNX_OFED, add the following to
/etc/modprobe.d/mlnx.conf:
options ib_uverbs disable_raw_qp_enforcement=1
options mlx4_core fast_drop=1
options mlx4_core log_num_mgm_entry_size=-1
And restart the driver: /etc/init.d/openibd restart
Installing:
Install the package as any other rpm or debian package [rpm -i libvma.X.Y.Z-R.rpm].
The installation copies the VMA library to: /usr/lib[64]/libvma.so
The VMA monitoring utility is installed at: /usr/bin/vma_stat
The VMA extra socket API is located at: /usr/include/mellanox/vma_extra.h
The installation location of the README.txt and version information file
(VMA_VERSION), are as follows:
- Redhat: /usr/share/doc/libvma-X.Y.Z-R/
- SuSE: /usr/share/doc/packages/libvma-X.Y.Z-R/
Post Installation:
When working over Infiniband, we recommend to manually add persistence
for the following system parameters:
1. Force IPoIB to work in 'datagram' mode (disabling IPoIB 'connected' mode)
Modify "SET_IPOIB_CM=no" in file "/etc/infiniband/openib.conf"
2. Force IGMP to work in V2 on IB interfaces
Add "net.ipv4.conf.all.force_igmp_version = 2" in file "/etc/sysctl.conf"
Upgrading:
Use rpm update procedure: # rpm -U libvma.X.Y.Z-R.rpm
You can upgrade by uninstalling (rpm -e) the previously installed package
before starting to install the new VMA rpm.
Uninstalling:
When uninstalling remember to uninstall (rpm -e) the package before you
uninstall ofed.
Running:
Set the env variable LD_PRELOAD to libvma.so and run your application.
Example: # LD_PRELOAD=libvma.so iperf -uc 224.22.22.22 -t 5
Configuration Values
====================
On default startup the VMA library logs to stderr the VMA version, the modified
configuration parameters being used and their values.
Please notice that except VMA_TRACELEVEL, VMA logs just those parameters whose value != default.
Example:
VMA INFO: ---------------------------------------------------------------------------
VMA INFO: VMA_VERSION: 8.4.3-0 Development Snapshot built on Sep 3 2017 11:58:07
VMA INFO: Cmd Line: sockperf sr -i 4.4.4.3
VMA INFO: Current Time: Sun Sep 3 12:03:14 2017
VMA INFO: Pid: 29881
VMA INFO: OFED Version: MLNX_OFED_LINUX-4.1-2.0.0.0:
VMA INFO: Architecture: x86_64
VMA INFO: Node: r-aa-bob3.mtr.labs.mlnx
VMA INFO: ---------------------------------------------------------------------------
VMA INFO: Log Level DETAILS [VMA_TRACELEVEL]
VMA DETAILS: Log Details 0 [VMA_LOG_DETAILS]
VMA DETAILS: Log Colors Enabled [VMA_LOG_COLORS]
VMA DETAILS: Log File [VMA_LOG_FILE]
VMA DETAILS: Stats File [VMA_STATS_FILE]
VMA DETAILS: Stats shared memory directory /tmp/ [VMA_STATS_SHMEM_DIR]
VMA DETAILS: Stats FD Num (max) 100 [VMA_STATS_FD_NUM]
VMA DETAILS: Conf File /etc/libvma.conf [VMA_CONFIG_FILE]
VMA DETAILS: Application ID VMA_DEFAULT_APPLICATION_ID [VMA_APPLICATION_ID]
VMA DETAILS: Polling CPU idle usage Disabled [VMA_CPU_USAGE_STATS]
VMA DETAILS: SigIntr Ctrl-C Handle Disabled [VMA_HANDLE_SIGINTR]
VMA DETAILS: SegFault Backtrace Disabled [VMA_HANDLE_SIGSEGV]
VMA DETAILS: Ring allocation logic TX 0 (Ring per interface) [VMA_RING_ALLOCATION_LOGIC_TX]
VMA DETAILS: Ring allocation logic RX 0 (Ring per interface) [VMA_RING_ALLOCATION_LOGIC_RX]
VMA DETAILS: Ring migration ratio TX 100 [VMA_RING_MIGRATION_RATIO_TX]
VMA DETAILS: Ring migration ratio RX 100 [VMA_RING_MIGRATION_RATIO_RX]
VMA DETAILS: Ring limit per interface 0 (no limit) [VMA_RING_LIMIT_PER_INTERFACE]
VMA DETAILS: Ring On Device Memory TX 0 [VMA_RING_DEV_MEM_TX]
VMA DETAILS: TCP max syn rate 0 (no limit) [VMA_TCP_MAX_SYN_RATE]
VMA DETAILS: Tx Mem Segs TCP 1000000 [VMA_TX_SEGS_TCP]
VMA DETAILS: Tx Mem Bufs 200000 [VMA_TX_BUFS]
VMA DETAILS: Tx QP WRE 2048 [VMA_TX_WRE]
VMA DETAILS: Tx QP WRE Batching 64 [VMA_TX_WRE_BATCHING]
VMA DETAILS: Tx Max QP INLINE 204 [VMA_TX_MAX_INLINE]
VMA DETAILS: Tx MC Loopback Enabled [VMA_TX_MC_LOOPBACK]
VMA DETAILS: Tx non-blocked eagains Disabled [VMA_TX_NONBLOCKED_EAGAINS]
VMA DETAILS: Tx Prefetch Bytes 256 [VMA_TX_PREFETCH_BYTES]
VMA DETAILS: Rx Mem Bufs 200000 [VMA_RX_BUFS]
VMA DETAILS: Rx QP WRE 16000 [VMA_RX_WRE]
VMA DETAILS: Rx QP WRE Batching 64 [VMA_RX_WRE_BATCHING]
VMA DETAILS: Rx Byte Min Limit 65536 [VMA_RX_BYTES_MIN]
VMA DETAILS: Rx Poll Loops 100000 [VMA_RX_POLL]
VMA DETAILS: Rx Poll Init Loops 0 [VMA_RX_POLL_INIT]
VMA DETAILS: Rx UDP Poll OS Ratio 100 [VMA_RX_UDP_POLL_OS_RATIO]
VMA DETAILS: HW TS Conversion 3 [VMA_HW_TS_CONVERSION]
VMA DETAILS: Rx SW CSUM 1 [VMA_RX_SW_CSUM]
VMA DETAILS: Rx Poll Yield Disabled [VMA_RX_POLL_YIELD]
VMA DETAILS: Rx Prefetch Bytes 256 [VMA_RX_PREFETCH_BYTES]
VMA DETAILS: Rx Prefetch Bytes Before Poll 0 [VMA_RX_PREFETCH_BYTES_BEFORE_POLL]
VMA DETAILS: Rx CQ Drain Rate Disabled [VMA_RX_CQ_DRAIN_RATE_NSEC]
VMA DETAILS: GRO max streams 32 [VMA_GRO_STREAMS_MAX]
VMA DETAILS: TCP 3T rules Disabled [VMA_TCP_3T_RULES]
VMA DETAILS: ETH MC L2 only rules Disabled [VMA_ETH_MC_L2_ONLY_RULES]
VMA DETAILS: Force Flowtag for MC Disabled [VMA_MC_FORCE_FLOWTAG]
VMA DETAILS: Select Poll (usec) 100000 [VMA_SELECT_POLL]
VMA DETAILS: Select Poll OS Force Disabled [VMA_SELECT_POLL_OS_FORCE]
VMA DETAILS: Select Poll OS Ratio 10 [VMA_SELECT_POLL_OS_RATIO]
VMA DETAILS: Select Skip OS 4 [VMA_SELECT_SKIP_OS]
VMA DETAILS: CQ Drain Interval (msec) 10 [VMA_PROGRESS_ENGINE_INTERVAL]
VMA DETAILS: CQ Drain WCE (max) 10000 [VMA_PROGRESS_ENGINE_WCE_MAX]
VMA DETAILS: CQ Interrupts Moderation Enabled [VMA_CQ_MODERATION_ENABLE]
VMA DETAILS: CQ Moderation Count 48 [VMA_CQ_MODERATION_COUNT]
VMA DETAILS: CQ Moderation Period (usec) 50 [VMA_CQ_MODERATION_PERIOD_USEC]
VMA DETAILS: CQ AIM Max Count 560 [VMA_CQ_AIM_MAX_COUNT]
VMA DETAILS: CQ AIM Max Period (usec) 250 [VMA_CQ_AIM_MAX_PERIOD_USEC]
VMA DETAILS: CQ AIM Interval (msec) 250 [VMA_CQ_AIM_INTERVAL_MSEC]
VMA DETAILS: CQ AIM Interrupts Rate (per sec) 5000 [VMA_CQ_AIM_INTERRUPTS_RATE_PER_SEC]
VMA DETAILS: CQ Poll Batch (max) 16 [VMA_CQ_POLL_BATCH_MAX]
VMA DETAILS: CQ Keeps QP Full Enabled [VMA_CQ_KEEP_QP_FULL]
VMA DETAILS: QP Compensation Level 256 [VMA_QP_COMPENSATION_LEVEL]
VMA DETAILS: Offloaded Sockets Enabled [VMA_OFFLOADED_SOCKETS]
VMA DETAILS: Timer Resolution (msec) 10 [VMA_TIMER_RESOLUTION_MSEC]
VMA DETAILS: TCP Timer Resolution (msec) 100 [VMA_TCP_TIMER_RESOLUTION_MSEC]
VMA DETAILS: TCP control thread 0 (Disabled) [VMA_TCP_CTL_THREAD]
VMA DETAILS: TCP timestamp option 0 [VMA_TCP_TIMESTAMP_OPTION]
VMA DETAILS: TCP nodelay 0 [VMA_TCP_NODELAY]
VMA DETAILS: TCP quickack 0 [VMA_TCP_QUICKACK]
VMA DETAILS: Exception handling mode -1(just log debug message) [VMA_EXCEPTION_HANDLING]
VMA DETAILS: Avoid sys-calls on tcp fd Disabled [VMA_AVOID_SYS_CALLS_ON_TCP_FD]
VMA DETAILS: Allow privileged sock opt Enabled [VMA_ALLOW_PRIVILEGED_SOCK_OPT]
VMA DETAILS: Delay after join (msec) 0 [VMA_WAIT_AFTER_JOIN_MSEC]
VMA DETAILS: Internal Thread Affinity -1 [VMA_INTERNAL_THREAD_AFFINITY]
VMA DETAILS: Internal Thread Cpuset [VMA_INTERNAL_THREAD_CPUSET]
VMA DETAILS: Internal Thread Arm CQ Disabled [VMA_INTERNAL_THREAD_ARM_CQ]
VMA DETAILS: Internal Thread TCP Handling 0 (deferred) [VMA_INTERNAL_THREAD_TCP_TIMER_HANDLING]
VMA DETAILS: Thread mode Multi spin lock [VMA_THREAD_MODE]
VMA DETAILS: Buffer batching mode 1 (Batch and reclaim buffers) [VMA_BUFFER_BATCHING_MODE]
VMA DETAILS: Mem Allocate type 1 (Contig Pages) [VMA_MEM_ALLOC_TYPE]
VMA DETAILS: Num of UC ARPs 3 [VMA_NEIGH_UC_ARP_QUATA]
VMA DETAILS: UC ARP delay (msec) 10000 [VMA_NEIGH_UC_ARP_DELAY_MSEC]
VMA DETAILS: Num of neigh restart retries 1 [VMA_NEIGH_NUM_ERR_RETRIES]
VMA DETAILS: IPOIB support Enabled [VMA_IPOIB]
VMA DETAILS: BF (Blue Flame) Enabled [VMA_BF]
VMA DETAILS: fork() support Enabled [VMA_FORK]
VMA DETAILS: close on dup2() Enabled [VMA_CLOSE_ON_DUP2]
VMA DETAILS: MTU 0 (follow actual MTU) [VMA_MTU]
VMA DETAILS: MSS 0 (follow VMA_MTU) [VMA_MSS]
VMA DETAILS: TCP CC Algorithm 0 (LWIP) [VMA_TCP_CC_ALGO]
VMA DETAILS: Polling Rx on Tx TCP Disabled [VMA_RX_POLL_ON_TX_TCP]
VMA DETAILS: Trig dummy send getsockname() Disabled [VMA_TRIGGER_DUMMY_SEND_GETSOCKNAME]
VMA INFO: ---------------------------------------------------------------------------
VMA_TRACELEVEL
Logging level the VMA library will be using. Default is info
Example: # VMA_TRACELEVEL=debug
none
Print no log at all
panic
Panic level logging, this would generally cause fatal behavior and an exception
will be thrown by the VMA library. Typically, this is caused by memory
allocation problems. This level is rarely used.
error
Runtime ERRORs in the VMA.
Typically, these can provide insight for the developer of wrong internal
logic like: Errors from underlaying OS or Infiniband verbs calls. internal
double mapping/unmapping of objects.
warn
Runtime warning that do not disrupt the workflow of the application but
might warn of a problem in the setup or the overall setup configuration.
Typically, these can be address resolution failure (due to wrong routing
setup configuration), corrupted ip packets in the receive path or
unsupported functions requested by the user application
info
General information passed to the user of the application. Bring up
configuration logging or some general info to help the user better
use the VMA library
details
Complete VMA's configuration information.
Very high level insight of some of the critical decisions done in VMA.
debug
High level insight to the operations done in the VMA. All socket API calls
are logged and internal high level control channels log there activity.
fine
Low level run time logging of activity. This logging level includes basic
Tx and Rx logging in the fast path and it will lower application
performance. It is recommended to use this level with VMA_LOG_FILE param.
finer
Very low level run time logging of activity!
This logging level will DRASTICALLY lower application performance.
It is recommended to use this level with VMA_LOG_FILE param.
all
today this level is identical to finer
VMA_LOG_DETAILS
Add details on each log line.
0 = Basic log line
1 = ThreadId
2 = ProcessId + ThreadId
3 = Time + ProcessId + ThreadId [Time is in milli-seconds from start of process]
Default value is 0
VMA_LOG_COLORS
Use color scheme when logging. Red for errors, purple for warnings and dim for
low level debugs. VMA_LOG_COLORS is automatically disabled when logging is direct
to a non terminal device (e.g. VMA_LOG_FILE is configured).
Default value is 1 (Enabled)
VMA_LOG_FILE
Redirect all VMA logging to a specific user defined file.
This is very useful when raising the VMA_TRACELEVEL
VMA will replace a single '%d' appearing in the log file name with the pid of
the process loaded with VMA. This can help in running multiple instances of VMA
each with it's own log file name.
Example: VMA_LOG_FILE=/tmp/vma_log.txt
VMA_SPEC
VMA predefined specification profiles.
latency
Optimized for use cases that are keen on latency. i.e. Ping-Pong tests.
Latency SPEC changes the following default configuration
VMA_RING_DEV_MEM_TX = 16384 (default: 0)
VMA_TX_WRE = 256 (default: 2048)
VMA_TX_WRE_BATCHING = 4 (default: 64)
VMA_RX_WRE = 256 (default: 16000)
VMA_RX_WRE_BATCHING = 4 (default: 64)
VMA_RX_POLL = -1 (default: 100000)
VMA_RX_PREFETCH_BYTES_BEFORE_POLL = 256 (default: 0)
VMA_GRO_STREAMS_MAX = 0 (default: 32)
VMA_SELECT_POLL = -1 (default: 100000)
VMA_SELECT_POLL_OS_FORCE = Enable (default: Disabled)
VMA_SELECT_POLL_OS_RATIO = 1 (default: 10)
VMA_SELECT_SKIP_OS = 1 (default: 4)
VMA_PROGRESS_ENGINE_INTERVAL = 100 (default: 10)
VMA_CQ_MODERATION_ENABLE = Disable (default: Enabled)
VMA_CQ_AIM_MAX_COUNT = 128 (default: 560)
VMA_CQ_AIM_INTERVAL_MSEC = Disable (default: 250)
VMA_CQ_KEEP_QP_FULL = Disable (default: Enable)
VMA_TCP_NODELAY = Enable (default: Disable)
VMA_AVOID_SYS_CALLS_ON_TCP_FD = Enable (default: Disable)
VMA_INTERNAL_THREAD_AFFINITY = 0 (default: -1)
VMA_THREAD_MODE = Single (default: Multi spin lock)
VMA_MEM_ALLOC_TYPE = 2 (default: 1 (Contig Pages))
Example: VMA_SPEC=latency
multi_ring_latency
Optimized for use cases that are keen on latency where two applications communicate using send-only and receive-only TCP sockets
Multi ring latency SPEC changes the following default configuration
VMA_MEM_ALLOC_TYPE = 2 (default: 1 (Contig Pages))
VMA_SELECT_POLL = -1 (default: 100000)
VMA_RX_POLL = -1 (default: 100000)
VMA_RING_ALLOCATION_LOGIC_TX = 20 (default: Ring per interface)
VMA_RING_ALLOCATION_LOGIC_RX = 20 (default: Ring per interface)
VMA_SELECT_POLL_OS_RATIO = 0 (default: 10)
VMA_SELECT_SKIP_OS = 0 (default: 4)
VMA_RX_POLL_ON_TX_TCP = true (dafault: false)
VMA_TRIGGER_DUMMY_SEND_GETSOCKNAME = true (dafault: false)
Example: VMA_SPEC=multi_ring_latency
VMA_STATS_FILE
Redirect socket statistics to a specific user defined file.
VMA will dump each socket's statistics into a file when closing the socket.
Example: VMA_STATS_FILE=/tmp/stats
VMA_STATS_SHMEM_DIR
Set the directory path for vma to create the shared memory files for vma_stats.
No files will be created when setting this value to empty string "".
Default value is /tmp/
VMA_STATS_FD_NUM
Max number of sockets monitored by VMA statistic mechanism.
Value range is 0 to 1024.
Default value is 100
VMA_CONFIG_FILE
Sets the full path to the VMA configuration file.
Default values is: /etc/libvma.conf
Example: VMA_CONFIG_FILE=/tmp/libvma.conf
VMA_APPLICATION_ID
Specify a group of rules from libvma.conf for VMA to apply.
Example: 'VMA_APPLICATION_ID=iperf_server'.
Default is "VMA_DEFAULT_APPLICATION_ID" (match only the '*' group rule)
VMA_CPU_USAGE_STATS
Calculate VMA CPU usage during polling HW loops.
This information is available through VMA stats utility.
Default value is 0 (Disabled)
VMA_HANDLE_SIGINTR
When Enabled, VMA handler will be called when interrupt signal is sent to the process.
VMA will also call to application's handler if exist.
Value range is 0 to 1
Default value is 0 (Disabled)
VMA_HANDLE_SIGSEGV
When Enabled, print backtrace if segmentation fault happens.
Value range is 0 to 1
Default value is 0 (Disabled)
VMA_TX_SEGS_TCP
Number of TCP LWIP segments allocation for each VMA process.
Default value is 1000000
VMA_TX_BUFS
Number of global Tx data buffer elements allocation.
Default value is 200000
VMA_TX_WRE
Number of Work Request Elements allocated in all transmit QP's.
The number of QP's can change according to the number of network offloaded
interfaces.
Default value is 2048
VMA_TX_WRE_BATCHING
The number of Tx Work Request Elements used until a completion signal is requested.
Tuning this parameter allows a better control of the jitter encountered from the
Tx CQE handling. Setting a high batching value results in high PPS and lower
avarge latency. Setting a low batching value results in lower latency std-dev.
Value range is 1-64
Default value is 64
VMA_TX_MAX_INLINE
Max send inline data set for QP.
Data copied into the INLINE space is at least 32 bytes of headers and
the rest can be user datagram payload.
VMA_TX_MAX_INLINE=0 disables INLINEing on the tx transmit path.
In older releases this parameter was called: VMA_MAX_INLINE
Default VMA_TX_MAX_INLINE is 204
VMA_TX_MC_LOOPBACK
This parameter sets the initial value used by VMA internally to controls the
multicast loopback packets behavior during transmission.
An application that calls setsockopt() with IP_MULTICAST_LOOP will run over
the initial value set by this parameter.
Read more in 'Multicast loopback behavior' in notes section below
Default value is 1 (Enabled)
VMA_TX_NONBLOCKED_EAGAINS
Return value 'OK' on all send operation done on a non-blocked udp sockets. This
is the OS default behavior. The datagram sent is silently dropped inside VMA
or the network stack.
When set Enabled (set to 1), VMA will return with error EAGAIN if it was unable
accomplish the send operation and the datagram was dropped.
In both cases a dropped Tx statistical counter is incremented.
Default value is 0 (Disabled)
VMA_TX_PREFETCH_BYTES
Accelerate offloaded send operation by optimizing cache. Different values
give optimized send rate on different machines. We recommend you tune this
for your specific hardware.
Value range is 0 to MTU size
Disable with a value of 0
Default value is 256 bytes
VMA_RING_ALLOCATION_LOGIC_TX
VMA_RING_ALLOCATION_LOGIC_RX
Ring allocation logic is used to separate the traffic to different rings.
By default all sockets use the same ring for both RX and TX over the same interface.
Even when specifing the logic to be per socket or thread, for different interfaces
we use different rings. This is useful when tuning for a multi-threaded application
and aiming for HW resource separation.
Warning: This feature might hurt performance for applications which their main
processing loop is based in select() and/or poll().
The logic options are:
0 - Ring per interface
10 - Ring per socket (using socket fd as separator)
20 - Ring per thread (using the id of the thread in which the socket was created)
30 - Ring per core (using cpu id)
31 - Ring per core - attach threads : attach each thread to a cpu core
Default value is 0
VMA_RING_MIGRATION_RATIO_TX
VMA_RING_MIGRATION_RATIO_RX
Ring migration ratio is used with the "ring per thread" logic in order to decide when
it is beneficial to replace the socket's ring with the ring allocated for the current thread.
Each VMA_RING_MIGRATION_RATIO iterations (of accessing the ring) we check the current
thread ID and see if our ring is matching the current thread.
If not, we consider ring migration. If we keep accessing the ring from the same thread for some
iterations, we migrate the socket to this thread ring.
Use a value of -1 in order to disable migration.
Default value is 100
VMA_RING_LIMIT_PER_INTERFACE
Limit the number of rings that can be allocated per interface.
For example, in ring allocation per socket logic, if the number of sockets using
the same interface is larger than the limit, then several sockets will be sharing the
same ring.
[Note:VMA_RX_BUFS might need to be adjusted in order to have enough buffers for all
rings in the system. Each ring consume VMA_RX_WRE buffers.]
Use a value of 0 for unlimited number of rings.
Default value is 0 (no limit)
VMA_RING_DEV_MEM_TX
VMA can use the On Device Memory to store the egress packet if it does not fit into
the BF inline buffer. This improves application egress latency by reducing PCI transactions.
Using VMA_RING_DEV_MEM_TX, the user can set the amount of On Device Memory buffer allocated
for each TX ring.
The total size of the On Device Memory is limited to 256k for a single port HCA and to
128k for dual port HCA.
Default value is 0
VMA_RX_BUFS
Number Rx data buffer elements allocation for the processes. These data buffers
may be used by all QPs on all HCAs
Default value is 200000
VMA_RX_WRE
Number of Work Request Elements allocated in all receive QP's.
Default value is 16000
VMA_RX_WRE_BATCHING
Number of Work Request Elements and RX buffers to batch before recycling.
Batching decrease latency mean, but might increase latency STD.
Value range is 1-1024.
Default value is 64
VMA_RX_BYTES_MIN
Minimum value in bytes that will be used per socket by VMA when applications
call to setsockopt(SO_RCVBUF). If application tries to set a smaller value then
configured in VMA_RX_BYTES_MIN, VMA will force this minimum limit value on the
socket.VMA offloaded socket's receive max limit of ready bytes count. If the
application does not drain a sockets and the byte limit is reached, new
received datagrams will be dropped.
Monitor of the applications socket's usage of current, max and dropped bytes
and packet counters can be done with vma_stats.
Default value is 65536
VMA_RX_POLL
The number of times to poll on Rx path for ready packets before going to sleep
(wait for interrupt in blocked mode) or return -1 (in non-blocked mode).
This Rx polling is done when the application is working with direct blocked
calls to read(), recv(), recvfrom() & recvmsg().
When Rx path has successfull poll hits (see performace monitoring) the latency
is improved dramatically. This comes on account of CPU utilization.
Value range is -1, 0 to 100,000,000
Where value of -1 is used for infinite polling
Default value is 100000
VMA_RX_POLL_INIT
VMA maps all UDP sockets as potential offloaded capable. Only after the
ADD_MEMBERSHIP does the offload start to work and the CQ polling kicks in VMA.
This parameter control the polling count during this transition phase where the
socket is a UDP unicast socket and no multicast addresses where added to it.
Once the first ADD_MEMBERSHIP is called the above VMA_RX_POLL takes effect.
Value range is similar to the above VMA_RX_POLL
Default value is 0
VMA_RX_UDP_POLL_OS_RATIO
The above param will define the ratio between VMA CQ poll and OS FD poll.
This will result in a single poll of the not-offloaded sockets every
VMA_RX_UDP_POLL_OS_RATIO offloaded socket (CQ) polls. No matter if the CQ poll
was a hit or miss. No matter if the socket is blocking or non-blocking.
When disabled, only offloaded sockets are polled.
This parameter replaces the two old parameters: VMA_RX_POLL_OS_RATIO and
VMA_RX_SKIP_OS
Disable with 0
Default value is 100
VMA_HW_TS_CONVERSION
The above param defines the time stamp conversion method.
Experimental verbs is required for converting the time stamp from hardware time (Hz)
to system time (seconds.nano_seconds). Hence, hardware support is not guaranteed.
The value of VMA_HW_TS_CONVERSION is determined by all devices - i.e if the hardware of
one device does not support the conversion, then it will be disabled for the other devices.
Currently only UDP RX flow is supported.
Options = [0,1,2,3,4]:
0 = Disabled
1 = Raw-HW time - only convert the time stamp to seconds.nano_seconds time
units (or disable if hardware does not supports).
2 = Best possible - Raw-HW or system time - Sync to system time, then Raw hardware time -
disable if none of them are supported by hardware.
3 = Sync to system time - convert the time stamp to seconds.nano_seconds time units.
comparable to UDP receive software timestamp.
disable if hardware does not supports.
4 = PTP Sync - convert the time stamp to seconds.nano_seconds time units.
in case it is not supported - will apply option 3 (or disable
if hardware does not supports).
Default value: 3
VMA_RX_POLL_YIELD
When an application is running with multiple threads, on a limited number of
cores, there is a need for each thread polling inside the VMA (read, readv,
recv & recvfrom) to yield the CPU to other polling thread so not to starve
them from processing incoming packets.
Default value is 0 (Disable)
VMA_RX_PREFETCH_BYTES
Size of receive buffer to prefetch into cache while processing ingress packets.
The default is a single cache line of 64 bytes which should be at least 32
bytes to cover the IPoIB+IP+UDP headers and a small part of the users payload.
Increasing this can help improve performance for larger user payload sizes.
Value range is 32 bytes to MTU size
Default value is 256 bytes
VMA_RX_PREFETCH_BYTES_BEFORE_POLL
Same as the above VMA_RX_PREFETCH_BYTES, only that prefetch is done before
acutally getting the packets.
This benefit low pps traffic latency.
Disable with 0.
Default value is 0
VMA_RX_CQ_DRAIN_RATE_NSEC
Socket's receive path CQ drain logic rate control.
When disabled (Default) the socket's receive path will first try to return a
ready packet from the socket's receive ready packet queue. Only if that queue
is empty will the socket check the CQ for ready completions for processing.
When enabled, even if the socket's receive ready packet queue is not empty it
will still check the CQ for ready completions for processing. This CQ polling
rate is controls in nano-second resolution to prevent CPU consumption because
of over CQ polling. This will enable a more 'real time' monitoring of the
sockets ready packet queue.
Recommended value is 100-5000 (nsec)
Default value is 0 (Disable)
VMA_RX_POLL_ON_TX_TCP
This parameter enables/disables TCP RX polling during TCP TX operation for faster
TCP ACK reception.
Default: 0 (Disable)
VMA_TRIGGER_DUMMY_SEND_GETSOCKNAME
This parameter triggers dummy packet send from getsockname(), this
will warm up the caches.
For more information regarding dummy send, see VMA user manual document.
Default: 0 (Disable)
VMA_GRO_STREAMS_MAX
Control the number of TCP streams to perform GRO (generic receive offload) simultaneously.
Disable GRO with a value of 0.
Default value is 32
VMA_TCP_3T_RULES
Use only 3 tuple rules for TCP, instead of using 5 tuple rules.
This can improve performance for a server with listen socket which accept many
connections.
VMA_ETH_MC_L2_ONLY_RULES
Use only L2 rules for Ethernet Multicast.
All loopback traffic will be handled by VMA instead of OS.
VMA_MC_FORCE_FLOWTAG
Forces the use of flow tag acceleration for multicast flows where setsockopt(SO_REUSEADDR) is
set.
Applicable if there are no other sockets opened for the same flow in system.
VMA_SELECT_POLL
The duration in micro-seconds (usec) in which to poll the hardware on Rx path before
going to sleep (pending an interrupt blocking on OS select(), poll() or epoll_wait().
The max polling duration will be limited by the timeout the user is using when
calling select(), poll() or epoll_wait().
When select(), poll() or epoll_wait() path has successfull receive poll hits
(see performace monitoring) the latency is improved dramatically. This comes
on account of CPU utilization.
Value range is -1, 0 to 100,000,000
Where value of -1 is used for infinite polling
Where value of 0 is used for no polling (interrupt driven)
Default value is 100000
VMA_SELECT_POLL_OS_FORCE
This flag forces to poll the OS file descriptors while user thread calls
select(), poll() or epoll_wait() even when no offloaded sockets are mapped.
Enabling this flag causes VMA to set VMA_SELECT_POLL_OS_RATIO and
VMA_SELECT_SKIP_OS to 1. This will result in VMA_SELECT_POLL number of
times VMA will poll the OS file descriptors, along side with offloaded
sockets, if such sockets exists.
Note that setting VMA_SELECT_SKIP_OS and VMA_SELECT_POLL_OS_RATIO
directly will override the values these parameters gets while
VMA_SELECT_POLL_OS_FORCE is enabled.
Enable with 1
Disable with 0
Default value is 0
VMA_SELECT_POLL_OS_RATIO
This will enable polling of the OS file descriptors while user thread calls
select() or poll() and the VMA is busy in the offloaded sockets polling loop.
This will result in a signle poll of the not-offloaded sockets every
VMA_SELECT_POLL_RATIO offlaoded sockets (CQ) polls.
When disabled, only offlaoded sockets are polled.
(See VMA_SELECT_POLL for more info)
Disable with 0
Default value is 10
VMA_SELECT_SKIP_OS
Similar to VMA_RX_SKIP_OS, but in select() or poll() this will force the VMA
to check the non offloaded fd even though an offloaded socket has ready
packets found while polling.
Default value is 4
VMA_PROGRESS_ENGINE_INTERVAL
VMA Internal thread safe check that the CQ is drained at least onse
every N milliseconds.
This mechanism allows VMA to progress the TCP stack even when the application
doesn't access its socket (so it doesn't provide a context to VMA).
If CQ was already drained by the application receive
socket API calls then this thread goes back to sleep without any processing.
Disable with 0
Default value is 10 msec
VMA_PROGRESS_ENGINE_WCE_MAX
Each time VMA's internal thread starts it's CQ draining, it will stop when
reach this max value.
The application is not limited by this value in the number of CQ elements
it can ProcessId form calling any of the receive path socket APIs.
Default value is 10000
VMA_CQ_MODERATION_ENABLE
Enable CQ interrupt moderation.
Default value is 1 (Enabled)
VMA_CQ_MODERATION_COUNT
Number of packets to hold before generating interrupt.
Default value is 48
VMA_CQ_MODERATION_PERIOD_USEC
Period in micro-seconds for holding the packet before generating interrupt.
Default value is 50
VMA_CQ_AIM_MAX_COUNT
Maximum count value to use in the adaptive interrupt moderation algorithm.
Default value is 560
VMA_CQ_AIM_MAX_PERIOD_USEC
Maximum period value to use in the adaptive interrupt moderation algorithm.
Default value is 250
VMA_CQ_AIM_INTERVAL_MSEC
Frequency of interrupt moderation adaptation.
Intervall in milli-seconds between adaptation attempts.
Use value of 0 to disable adaptive interrupt moderation.
Default value is 250
VMA_CQ_AIM_INTERRUPTS_RATE_PER_SEC
Desired interrupts rate per second for each ring (CQ).
The count and period parameters for CQ moderation will change automatically
to achieve the desired interrupt rate for the current traffic rate.
Default value is 5000
VMA_CQ_POLL_BATCH_MAX
Max size of the array while polling the CQs in the VMA
Default value is 16
VMA_CQ_KEEP_QP_FULL
If disabled (default), CQ will not try to compensate for each poll on the
receive path. It will use a "debth" to remember how many WRE miss from each QP
to fill it when buffers become avilable.
If enabled, CQ will try to compensate QP for each polled receive completion. If
buffers are short it will re-post a recently completed buffer. This causes a packet
drop and will be monitored in the vma_stats.
Default value is 1 (Enabled)
VMA_QP_COMPENSATION_LEVEL
Number of spare receive buffer CQ holds to allow for filling up QP while full
receive buffers are being processes inside VMA.
Default value is 256 buffers
VMA_OFFLOADED_SOCKETS
Create all sockets as offloaded/not-offloaded by default.
Value of 1 is for offloaded, 0 for not-offloaded.
Default value is 1 (Enabled)
VMA_TIMER_RESOLUTION_MSEC
Control VMA internal thread wakeup timer resolution (in milli seconds)
Default value is 10 (milli-sec)
VMA_TCP_TIMER_RESOLUTION_MSEC
Control VMA internal TCP timer resolution (fast timer) (in milli seconds).
Minimum value is the internal thread wakeup timer resolution (VMA_TIMER_RESOLUTION_MSEC).
Default value is 100 (milli-sec)
VMA_TCP_CTL_THREAD
Do all tcp control flows in the internal thread.
This feature should be kept disabled if using blocking poll/select (epoll is OK).
Use value of 0 to disable.
Use value of 1 for waking up the thread when there is work to do.
Use value of 2 for waiting for thread timer to expire.
Default value is disabled
VMA_TCP_TIMESTAMP_OPTION
If set, enable TCP timestamp option.
Currently, LWIP is not supporting RTTM and PAWS mechanisms.
See RFC1323 for info.
Use value of 0 to disable.
Use value of 1 for enable.
Use value of 2 for OS follow up.
Disabled by default (enabling causing a slight performance degradation).
VMA_TCP_NODELAY
If set, disable the Nagle algorithm option for each TCP socket during initialization.
This means that TCP segments are always sent as soon as possible, even if there is
only a small amount of data.
For more information on TCP_NODELAY flag refer to tcp manual page.
Valid Values are:
Use value of 0 to disable.
Use value of 1 for enable.
Default value is Disabled.
VMA_TCP_QUICKACK
If set, disable delayed ack ability.
This means that TCP responds after every packet.
For more information on TCP_QUICKACK flag refer to tcp manual page.
Valid Values are:
Use value of 0 to disable.
Use value of 1 for enable.
Default value is Disabled.
VMA_RX_SW_CSUM
This parameter enables/disables software checksum validation for ingress TCP/UDP IP packets.
Most Mellanox HCAs support hardware offload checksum validation. If the hardware does not
support checksum validation offload, software checksum validation is required.
When this parameter is enabled, software checksum validation is calculated only if hardware
offload checksum validation is not performed.
Performance degradation might occur if hardware offload fails to validate checksum and
software calculation is used.
Note that disabling software calculation might cause corrupt packets to be
processed by VMA and the application, when the hardware does not perform this action.
For further details on which adapter card supports hardware offload checksum validation,
please refer to the VMA Release Notes.
Valid Values are:
Use value of 0 to disable.
Use value of 1 for enable.
Default value is Enabled.
VMA_EXCEPTION_HANDLING
Mode for handling missing support or error cases in Socket API or functionality by VMA.
Useful for quickly identifying VMA unsupported Socket API or features
Use value of -2 to exit() on VMA startup failure.
Use value of -1 for just handling at DEBUG severity.
Use value of 0 to log DEBUG message and try recovering via Kernel network stack (un-offloading the socket).
Use value of 1 to log ERROR message and try recovering via Kernel network stack (un-offloading the socket).
Use value of 2 to log ERROR message and return API respectful error code.
Use value of 3 to log ERROR message and abort application (throw vma_error exception).
Default value is -1 (notice, that in the future the default value will be changed to 0)
VMA_AVOID_SYS_CALLS_ON_TCP_FD
For TCP fd, avoid system calls for the supported options of:
ioctl, fcntl, getsockopt, setsockopt.
Non-supported options will go to OS.
To activate, use VMA_AVOID_SYS_CALLS_ON_TCP_FD=1.
Default value is disabled
VMA_INTERNAL_THREAD_AFFINITY
Control which CPU core(s) the VMA internal thread is serviced on. The cpu set
should be provided as *EITHER* a hexidecmal value that represents a bitmask. *OR* as a
comma delimited of values (ranges are ok). Both the bitmask and comma delimited list
methods are identical to what is supported by the taskset command. See the man page
on taskset for additional information.
Where value of -1 disables internal thread affinity setting by VMA
Bitmask Examples:
0x00000001 - Run on processor 0.
0x00000007 - Run on processors 1,2, and 3.
Comma Delimited Examples:
0,4,8 - Run on processors 0,4, and 8.
0,1,7-10 - Run on processors 0,1,7,8,9 and 10.
Default value is -1 (Disabled).
VMA_INTERNAL_THREAD_CPUSET
Select a cpuset for VMA internal thread (see man page of cpuset).
The value is the path to the cpuset (for example: /dev/cpuset/my_set), or an empty
string to run it on the same cpuset the process runs on.
Default value is an empty string.
VMA_INTERNAL_THREAD_TCP_TIMER_HANDLING
Select the internal thread policy when handling TCP timers
Use value of 0 for deferred handling. The internal thread will not handle TCP timers upon timer
expiration (once every 100ms) in order to let application threads handling it first
Use value of 1 for immediate handling. The internal thread will try locking and handling TCP timers upon
timer expiration (once every 100ms). Application threads may be blocked till internal thread finishes handling TCP timers
Default value is 0 (deferred handling)
VMA_INTERNAL_THREAD_ARM_CQ
Wakeup the internal thread for each packet that the CQ recieve.
Poll and process the packet and bring it to the socket layer.
This can minimize latency in case of a busy application which is not available to
recieve the packet when it arrived.
However, this might decrease performance in case of high pps rate application.
Default value is 0 (Disabled)
VMA_WAIT_AFTER_JOIN_MSEC
This parameter indicates the time of delay the first packet send after
receiving the multicast JOINED event from the SM
This is helpful to over come loss of first few packets of an outgoing stream
due to SM lengthy handling of MFT configuration on the switch chips
Default value is 0 (milli-sec)
VMA_THREAD_MODE
By default VMA is ready for multi-threaded applications, meaning it is thread safe.
If the users application is a single threaded one, then using this configuration
parameter you can help eliminate VMA locks and get even better performance.
Single threaded application value is 0
Multi threaded application using spin lock value is 1
Multi threaded application using mutex lock value is 2
Multi threaded application with more threads than cores using spin lock value is 3
Default value is 1 (Multi with spin lock)
VMA_BUFFER_BATCHING_MODE
Batching of returning Rx buffers and pulling Tx buffers per socket.
In case the value is 0 then VMA will not use buffer batching.
In case the value is 1 then VMA will use buffer batching and will try to periodically reclaim unused buffers.
In case the value is 2 then VMA will use buffer batching with no reclaim.
[future: other values are reserved]
Default value is 1
VMA_MEM_ALLOC_TYPE
This replaces the VMA_HUGETBL parameter logic.
VMA will try to allocate data buffers as configured:
0 - "ANON" - using malloc
1 - "CONTIG" - using contiguous pages
2 - "HUGEPAGES" - using huge pages.
OFED will also try to allocate QP & CQ memory accordingly:
0 - "ANON" - default - use current pages ANON small ones.
"HUGE" - force huge pages
"CONTIG" - force contig pages
1 - "PREFER_CONTIG" - try contig fallback to ANON small pages.
"PREFER_HUGE" - try huge fallback to ANON small pages.
2 - "ALL" - try huge fallback to contig if failed fallback to ANON small pages.
To overrive OFED use: (MLX_QP_ALLOC_TYPE, MLX_CQ_ALLOC_TYPE)
Default value is 1 (Contiguous pages)
The following VMA neigh parameters are for advanced users or Mellanox support only:
VMA_NEIGH_UC_ARP_QUATA
VMA will send UC ARP in case neigh state is NUD_STALE.
In case that neigh state is still NUD_STALE VMA will try
VMA_NEIGH_UC_ARP_QUATA retries to send UC ARP again and then will send BC ARP.
VMA_NEIGH_UC_ARP_DELAY_MSEC
This parameter indicates number of msec to wait betwen every UC ARP.
VMA_NEIGH_NUM_ERR_RETRIES
This number inidcates number of retries to restart neigh state machine in case neigh got ERROR event.
Deafult value is 1
VMA_BF
This flag enables / disables BF (Blue Flame) usage of the ConnectX
Deafult value is 1 (Enabled)
VMA_FORK
Control whether VMA should support fork. Setting this flag on will cause VMA to
call ibv_fork_init() function. ibv_fork_init() initializes libibverbs's data
structures to handle fork() function calls correctly and avoid data corruption.
If ibv_fork_init() is not called or returns a non-zero status, then libibverbs
data structures are not fork()-safe and the effect of an application calling
fork() is undefined.
ibv_fork_init() works on Linux kernels 2.6.17 and higher which support the
MADV_DONTFORK flag for madvise().
Note that VMA's default with huge pages enabled (VMA_HUGETBL) you should use an
OFED stack version that support fork()ing of with huge pages (OFED 1.5 and higher).
Default value is 0 (Disabled)
VMA_CLOSE_ON_DUP2
When this parameter is enabled, VMA will handle the dupped fd (oldfd),
as if it was closed (clear internal data structures) and only then,
will forward the call to the OS.
This is, in practice, a very rudimentary dup2 support.
It only supports the case, where dup2 is used to close file descriptors,
Default value is 1 (Enabled)
VMA_MTU
Size of each Rx and Tx data buffer (Maximum Transfer Unit).
This value sets the fragmentation size of the packets sent by the VMA library.
If VMA_MTU is 0 then for each inteterface VMA will follow the actual MTU.
If VMA_MTU is greater than 0 then this MTU value is applicable to all interfaces regardless of their actual MTU
Default value is 0 (following interface actual MTU)
VMA_MSS
VMA_MSS define the max TCP payload size that can sent without IP fragmentation.
Value of 0 will set VMA's TCP MSS to be aligned with VMA_MTU configuration
(leaving 40 bytes room for IP + TCP headers; "TCP MSS = VMA_MTU - 40").
Other VMA_MSS values will force VMA's TCP MSS to that specific value.
Default value is 0 (following VMA_MTU)
VMA_TCP_CC_ALGO
TCP congestion control algorithm.
The default algorithm coming with LWIP is a variation of Reno/New-Reno.
The new Cubic algorithm was adapted from FreeBsd implementation.
Use value of 0 for LWIP algorithm.
Use value of 1 for the Cubic algorithm.
Default value is 0 (LWIP).
VMA_TCP_MAX_SYN_RATE
Limit the number of TCP SYN packets that VMA will handle
per second per listen socket.
For example, in case you use 10 for this value than VMA will accept at most 10
(could be less) new connections per second per listen socket.
Use a value of 0 for un-limiting the number of TCP SYN packets that can be handled.
Value range is 0 to 100000.
Default value is 0 (no limit)
VMA Monitoring & Performance Counters
=====================================
The VMA internal performance counters include information per user
sockets and a global view on select() and epoll_wait() usage by the application.
Use the 'vma_stats' included utility to view the per socket information and
performance counters during run time.
Usage:
vma_stats [-p pid] [-k directory] [-v view] [-d details] [-i interval]
Defaults:
find_pid=enabled, directory="/tmp/", view=1, details=1, interval=1,
Options:
-p, --pid=<pid> Show VMA statistics for proccess with pid: <pid>
-k, --directory=<directory> Set shared memory directory path to <directory>
-n, --name=<application> Show VMA statistics for application: <application>
-f, --find_pid Find and show statistics for VMA instance running (default)
-F, --forbid_clean By setting this flag inactive shared objects would not be removed
-i, --interval=<n> Print report every <n> seconds
-c, --cycles=<n> Do <n> report print cycles and exit, use 0 value for infinite (default)
-v, --view=<1|2|3|4|5> Set view type:1- basic info,2- extra info,3- full info,4- mc groups,5- similar to 'netstat -tunaep'
-d, --details=<1|2> Set details mode:1- to see totals,2- to see deltas
-z, --zero Zero counters
-l, --log_level=<level> Set VMA log level to <level>(1 <= level <= 7)
-S, --fd_dump=<fd> [<level>] Dump statistics for fd number <fd> using log level <level>. use 0 value for all open fds
-D, --details_level=<level> Set VMA log details level to <level>(0 <= level <= 3)
-s, --sockets=<list|range> Log only sockets that match <list> or <range>, format: 4-16 or 1,9 (or combination)
-V, --version Print version
-h, --help Print this help message
Use VMA_STATS_FILE to get internal VMA statistics like vma_stats provide.
If this parameter is set and the user application performed transmite or receive
activity on a socket, then these values will be logs once the sockets are closed.
Below is a logout example of a socket performance counters.
Below the logout example there is some explanations about the numbers.
VMA: [fd=10] Tx Offload: 455 KB / 233020 / 0 / 3 [bytes/packets/drops/errors]
VMA: [fd=10] Tx OS info: 0 KB / 0 / 0 [bytes/packets/errors]
VMA: [fd=10] Rx Offload: 455 KB / 233020 / 0 / 0 [bytes/packets/eagains/errors]
VMA: [fd=10] Rx byte: max 200 / dropped 0 (0.00%) / limit 2000000
VMA: [fd=10] Rx pkt : max 1 / dropped 0 (0.00%)
VMA: [fd=10] Rx OS info: 0 KB / 0 / 0 [bytes/packets/errors]
VMA: [fd=10] Rx poll: 0 / 233020 (100.00%) [miss/hit]
Looking good :)
- No errors on transmite or receive on this socket (user fd=10)
- All the traffic was offloaded. No packets transmitted or receive via the OS.
- Just about no missed Rx polls (see VMA_RX_POLL & VMA_SELECT_POLL), meaning
the receiving thread did not get to a blocked state to cause a contexts
switch and hurt latency.
- No dropped packets caused by socket receive buffer limit (see VMA_RX_BYTES_MIN)
Interrupt Moderation
====================
The basic idea behind interrupt moderation is that the HW will not generate
interrupt for each packet, but instead only after some amount of packets received
or after the packet was held for some time.
The adaptive interrupt moderation change this packet count and time period
automatically to reach a desired rate of interrupts.