Unrolled build for rust-lang#115548

Rollup merge of rust-lang#115548 - Zoxc:parallel-extract, r=wesleywiser

Extract parallel operations in `rustc_data_structures::sync` into a new `parallel` submodule

This extracts parallel operations in `rustc_data_structures::sync` into a new `parallel` submodule. This cuts down on the size of the large `cfg_if!` in `sync` and makes it easier to compare between serial and parallel variants.

Author: rust-timer

compiler/rustc_data_structures/src/sync.rs

@@ -41,19 +41,21 @@
 //! [^2] `MTLockRef` is a typedef.
 
 pub use crate::marker::*;
-use parking_lot::Mutex;
-use std::any::Any;
 use std::collections::HashMap;
 use std::hash::{BuildHasher, Hash};
 use std::ops::{Deref, DerefMut};
-use std::panic::{catch_unwind, resume_unwind, AssertUnwindSafe};
 
 mod lock;
 pub use lock::{Lock, LockGuard, Mode};
 
 mod worker_local;
 pub use worker_local::{Registry, WorkerLocal};
 
+mod parallel;
+#[cfg(parallel_compiler)]
+pub use parallel::scope;
+pub use parallel::{join, par_for_each_in, par_map, parallel_guard};
+
 pub use std::sync::atomic::Ordering;
 pub use std::sync::atomic::Ordering::SeqCst;
 
@@ -107,37 +109,6 @@ mod mode {
 
 pub use mode::{is_dyn_thread_safe, set_dyn_thread_safe_mode};
 
-/// A guard used to hold panics that occur during a parallel section to later by unwound.
-/// This is used for the parallel compiler to prevent fatal errors from non-deterministically
-/// hiding errors by ensuring that everything in the section has completed executing before
-/// continuing with unwinding. It's also used for the non-parallel code to ensure error message
-/// output match the parallel compiler for testing purposes.
-pub struct ParallelGuard {
-    panic: Mutex<Option<Box<dyn Any + std::marker::Send + 'static>>>,
-}
-
-impl ParallelGuard {
-    pub fn run<R>(&self, f: impl FnOnce() -> R) -> Option<R> {
-        catch_unwind(AssertUnwindSafe(f))
-            .map_err(|err| {
-                *self.panic.lock() = Some(err);
-            })
-            .ok()
-    }
-}
-
-/// This gives access to a fresh parallel guard in the closure and will unwind any panics
-/// caught in it after the closure returns.
-#[inline]
-pub fn parallel_guard<R>(f: impl FnOnce(&ParallelGuard) -> R) -> R {
-    let guard = ParallelGuard { panic: Mutex::new(None) };
-    let ret = f(&guard);
-    if let Some(panic) = guard.panic.into_inner() {
-        resume_unwind(panic);
-    }
-    ret
-}
-
 cfg_if! {
     if #[cfg(not(parallel_compiler))] {
         use std::ops::Add;
@@ -229,44 +200,6 @@ cfg_if! {
         pub type AtomicU32 = Atomic<u32>;
         pub type AtomicU64 = Atomic<u64>;
 
-        pub fn join<A, B, RA, RB>(oper_a: A, oper_b: B) -> (RA, RB)
-            where A: FnOnce() -> RA,
-                  B: FnOnce() -> RB
-        {
-            let (a, b) = parallel_guard(|guard| {
-                let a = guard.run(oper_a);
-                let b = guard.run(oper_b);
-                (a, b)
-            });
-            (a.unwrap(), b.unwrap())
-        }
-
-        #[macro_export]
-        macro_rules! parallel {
-            ($($blocks:block),*) => {{
-                $crate::sync::parallel_guard(|guard| {
-                    $(guard.run(|| $blocks);)*
-                });
-            }}
-        }
-
-        pub fn par_for_each_in<T: IntoIterator>(t: T, mut for_each: impl FnMut(T::Item) + Sync + Send) {
-            parallel_guard(|guard| {
-                t.into_iter().for_each(|i| {
-                    guard.run(|| for_each(i));
-                });
-            })
-        }
-
-        pub fn par_map<T: IntoIterator, R, C: FromIterator<R>>(
-            t: T,
-            mut map: impl FnMut(<<T as IntoIterator>::IntoIter as Iterator>::Item) -> R,
-        ) -> C {
-            parallel_guard(|guard| {
-                t.into_iter().filter_map(|i| guard.run(|| map(i))).collect()
-            })
-        }
-
         pub use std::rc::Rc as Lrc;
         pub use std::rc::Weak as Weak;
         pub use std::cell::Ref as ReadGuard;
@@ -372,105 +305,6 @@ cfg_if! {
 
         use std::thread;
 
-        #[inline]
-        pub fn join<A, B, RA: DynSend, RB: DynSend>(oper_a: A, oper_b: B) -> (RA, RB)
-        where
-            A: FnOnce() -> RA + DynSend,
-            B: FnOnce() -> RB + DynSend,
-        {
-            if mode::is_dyn_thread_safe() {
-                let oper_a = FromDyn::from(oper_a);
-                let oper_b = FromDyn::from(oper_b);
-                let (a, b) = rayon::join(move || FromDyn::from(oper_a.into_inner()()), move || FromDyn::from(oper_b.into_inner()()));
-                (a.into_inner(), b.into_inner())
-            } else {
-                let (a, b) = parallel_guard(|guard| {
-                    let a = guard.run(oper_a);
-                    let b = guard.run(oper_b);
-                    (a, b)
-                });
-                (a.unwrap(), b.unwrap())
-            }
-        }
-
-        // This function only works when `mode::is_dyn_thread_safe()`.
-        pub fn scope<'scope, OP, R>(op: OP) -> R
-        where
-            OP: FnOnce(&rayon::Scope<'scope>) -> R + DynSend,
-            R: DynSend,
-        {
-            let op = FromDyn::from(op);
-            rayon::scope(|s| FromDyn::from(op.into_inner()(s))).into_inner()
-        }
-
-        /// Runs a list of blocks in parallel. The first block is executed immediately on
-        /// the current thread. Use that for the longest running block.
-        #[macro_export]
-        macro_rules! parallel {
-            (impl $fblock:block [$($c:expr,)*] [$block:expr $(, $rest:expr)*]) => {
-                parallel!(impl $fblock [$block, $($c,)*] [$($rest),*])
-            };
-            (impl $fblock:block [$($blocks:expr,)*] []) => {
-                ::rustc_data_structures::sync::scope(|s| {
-                    $(let block = rustc_data_structures::sync::FromDyn::from(|| $blocks);
-                    s.spawn(move |_| block.into_inner()());)*
-                    (|| $fblock)();
-                });
-            };
-            ($fblock:block, $($blocks:block),*) => {
-                if rustc_data_structures::sync::is_dyn_thread_safe() {
-                    // Reverse the order of the later blocks since Rayon executes them in reverse order
-                    // when using a single thread. This ensures the execution order matches that
-                    // of a single threaded rustc.
-                    parallel!(impl $fblock [] [$($blocks),*]);
-                } else {
-                    $crate::sync::parallel_guard(|guard| {
-                        guard.run(|| $fblock);
-                        $(guard.run(|| $blocks);)*
-                    });
-                }
-            };
-        }
-
-        use rayon::iter::{FromParallelIterator, IntoParallelIterator, ParallelIterator};
-
-        pub fn par_for_each_in<I, T: IntoIterator<Item = I> + IntoParallelIterator<Item = I>>(
-            t: T,
-            for_each: impl Fn(I) + DynSync + DynSend
-        ) {
-            parallel_guard(|guard| {
-                if mode::is_dyn_thread_safe() {
-                    let for_each = FromDyn::from(for_each);
-                    t.into_par_iter().for_each(|i| {
-                        guard.run(|| for_each(i));
-                    });
-                } else {
-                    t.into_iter().for_each(|i| {
-                        guard.run(|| for_each(i));
-                    });
-                }
-            });
-        }
-
-        pub fn par_map<
-            I,
-            T: IntoIterator<Item = I> + IntoParallelIterator<Item = I>,
-            R: std::marker::Send,
-            C: FromIterator<R> + FromParallelIterator<R>
-        >(
-            t: T,
-            map: impl Fn(I) -> R + DynSync + DynSend
-        ) -> C {
-            parallel_guard(|guard| {
-                if mode::is_dyn_thread_safe() {
-                    let map = FromDyn::from(map);
-                    t.into_par_iter().filter_map(|i| guard.run(|| map(i))).collect()
-                } else {
-                    t.into_iter().filter_map(|i| guard.run(|| map(i))).collect()
-                }
-            })
-        }
-
         /// This makes locks panic if they are already held.
         /// It is only useful when you are running in a single thread
         const ERROR_CHECKING: bool = false;