building: Update instructions for ./x setup editor

src/building/quickstart.md

@@ -1,7 +1,7 @@
 # Quickstart
 
-This is a quickstart guide about getting the compiler running. For more information in the individual steps,
-see the other pages in this chapter.
+This is a quickstart guide about getting the compiler running. For more
+information on the individual steps, see the other pages in this chapter.
 
 First, clone the repository:
 
@@ -10,34 +10,38 @@ git clone https://github.com/rust-lang/rust.git
 cd rust
 ```
 
-When building the compiler, we don't use `cargo` directly, instead we use a wrapper called "x".
-It is invoked with `./x`.
+When building the compiler, we don't use `cargo` directly, instead we use a
+wrapper called "x". It is invoked with `./x`.
 
-We need to create a configuration for the build. Use `./x setup` to create a good default.
+We need to create a configuration for the build. Use `./x setup` to create a
+good default.
 
 ```sh
 ./x setup
 ```
 
-Then, we can build the compiler. Use `./x build` to build the compiler, standard library and a few tools.
-You can also `./x check` to just check it.
-All these commands can take specific components/paths as arguments, for example `./x check compiler` to just check the compiler.
+Then, we can build the compiler. Use `./x build` to build the compiler, standard
+library and a few tools. You can also `./x check` to just check it. All these
+commands can take specific components/paths as arguments, for example `./x check
+compiler` to just check the compiler.
 
 ```sh
 ./x build
 ```
 
-> When doing a change to the compiler that does not affect the way it compiles the standard library
-(so for example, a change to an error message), use `--keep-stage-std 1` to avoid recompiling it.
+> When doing a change to the compiler that does not affect the way it compiles
+the standard library (so for example, a change to an error message), use
+`--keep-stage-std 1` to avoid recompiling it.
 
-After building the compiler and standard library, you now have a working compiler toolchain.
-You can use it with rustup by linking it.
+After building the compiler and standard library, you now have a working
+compiler toolchain. You can use it with rustup by linking it.
 
 ```sh
 rustup toolchain link stage1 build/host/stage1
 ```
 
-Now you have a toolchain called `stage1` linked to your build. You can use it to test the compiler.
+Now you have a toolchain called `stage1` linked to your build. You can use it to
+test the compiler.
 
 ```sh
 rustc +stage1 testfile.rs
@@ -46,19 +50,25 @@ rustc +stage1 testfile.rs
 After doing a change, you can run the compiler test suite with `./x test`.
 
 `./x test` runs the full test suite, which is slow and rarely what you want.
-Usually, `./x test tests/ui` is what you want after a compiler change,
-testing all [UI tests](../tests/ui.md) that invoke the compiler on a specific test file and check the output.
+Usually, `./x test tests/ui` is what you want after a compiler change, testing
+all [UI tests](../tests/ui.md) that invoke the compiler on a specific test file
+and check the output.
 
 ```sh
 ./x test tests/ui
 ```
 
-Use `--bless` if you've made a change and want to update the `.stderr` files with the new output.
+Use `--bless` if you've made a change and want to update the `.stderr` files
+with the new output.
 
-> `./x suggest` can also be helpful for suggesting which tests to run after a change.
+> `./x suggest` can also be helpful for suggesting which tests to run after a
+> change.
 
-Congrats, you are now ready to make a change to the compiler! If you have more questions,
-[the full chapter](./how-to-build-and-run.md) might contain the answers, and if it doesn't,
-feel free to ask for help on [Zulip](https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp).
+Congrats, you are now ready to make a change to the compiler! If you have more
+questions, [the full chapter](./how-to-build-and-run.md) might contain the
+answers, and if it doesn't, feel free to ask for help on
+[Zulip](https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp).
 
-If you use VSCode, `./x setup` will ask you if you want to set up the config. For other editors, check out [suggested workflows](./suggested.md).
+If you use VSCode, Vim, Emacs or Helix, `./x setup` will ask you if you want to
+set up the editor config. For more information, check out [suggested
+workflows](./suggested.md).

src/building/suggested.md

@@ -15,10 +15,8 @@ par. If the hook fails then run `./x test tidy --bless` and commit the changes.
 If you decide later that the pre-push behavior is undesirable, you can delete
 the `pre-push` file in `.git/hooks`.
 
-A prebuilt git hook lives at
-[`src/etc/pre-push.sh`](https://github.com/rust-lang/rust/blob/master/src/etc/pre-push.sh)
-which can be copied into your `.git/hooks` folder as `pre-push` (without the
-`.sh` extension!).
+A prebuilt git hook lives at [`src/etc/pre-push.sh`]. It can be copied into
+your `.git/hooks` folder as `pre-push` (without the `.sh` extension!).
 
 You can also install the hook as a step of running `./x setup`!
 
@@ -43,11 +41,16 @@ If you have enough free disk space and you would like to be able to run `x`
 commands while rust-analyzer runs in the background, you can also add
 `--build-dir build-rust-analyzer` to the `overrideCommand` to avoid x locking.
 
+Running `./x setup editor` will prompt you to create a project-local LSP config
+file for one of the supported editors. You can also create the config file as a
+step of running `./x setup`.
+
 ### Visual Studio Code
 
-Running `./x setup vscode` will prompt you to create a `.vscode/settings.json`
-file which will configure Visual Studio code. The recommended `rust-analyzer`
-settings live at [`src/etc/rust_analyzer_settings.json`].
+Selecting `vscode` in `./x setup editor` will prompt you to create a
+`.vscode/settings.json` file which will configure Visual Studio code. The
+recommended `rust-analyzer` settings live at
+[`src/etc/rust_analyzer_settings.json`].
 
 If running `./x check` on save is inconvenient, in VS Code you can use a [Build
 Task] instead:
@@ -83,13 +86,14 @@ here](https://rust-analyzer.github.io/manual.html#nvim-lsp).
 
 1. First install the plugin. This can be done by following the steps in the
  README.
-2. Run `x setup`, which will have a prompt for it to create a
+2. Run `./x setup editor`, and select `vscode` to create a
  `.vscode/settings.json` file. `neoconf` is able to read and update
  rust-analyzer settings automatically when the project is opened when this
  file is detected.
 
-If you're running `coc.nvim`, you can use `:CocLocalConfig` to create a
-`.vim/coc-settings.json`, and copy the settings from
+If you're using `coc.nvim`, you can run `./x setup editor` and select `vim` to
+create a `.vim/coc-settings.json`. The settings can be edited with
+`:CocLocalConfig`. The recommended settings live at
 [`src/etc/rust_analyzer_settings.json`].
 
 Another way is without a plugin, and creating your own logic in your
@@ -111,10 +115,10 @@ Emacs provides support for rust-analyzer with project-local configuration
 through [Eglot](https://www.gnu.org/software/emacs/manual/html_node/eglot/). 
 Steps for setting up Eglot with rust-analyzer can be [found
 here](https://rust-analyzer.github.io/manual.html#eglot). 
-Having set up Emacs & Eglot for Rust development in general, you can use the
-configuration for rustc provided in [`src/etc/rust_analyzer_eglot.el`](
-https://github.com/rust-lang/rust/blob/master/src/etc/rust_analyzer_eglot.el). 
-Simply copy the provided file to `.dir-locals.el` in the project root directory. 
+Having set up Emacs & Eglot for Rust development in general, you can run
+`./x setup editor` and select `emacs`, which will prompt you to create
+`.dir-locals.el` with the recommended configuration for Eglot.
+The recommended settings live at [`src/etc/rust_analyzer_eglot.el`]. 
 For more information on project-specific Eglot configuration, consult [the
 manual](https://www.gnu.org/software/emacs/manual/html_node/eglot/Project_002dspecific-configuration.html).
 
@@ -123,14 +127,13 @@ manual](https://www.gnu.org/software/emacs/manual/html_node/eglot/Project_002dsp
 Helix comes with built-in LSP and rust-analyzer support. 
 It can be configured through `languages.toml`, as described
 [here](https://docs.helix-editor.com/languages.html). 
-You can use the configuration for rustc provided in
-[`src/etc/rust_analyzer_helix.toml`](https://github.com/rust-lang/rust/blob/master/src/etc/rust_analyzer_helix.toml). 
-Simply copy the provided file to `.helix/languages.toml` in the project root
-directory.
+You can run `./x setup editor` and select `helix`, which will prompt you to
+create `languages.toml` with the recommended configuration for Helix. The
+recommended settings live at [`src/etc/rust_analyzer_helix.toml`]. 
 
 ## Check, check, and check again
 
-When doing simple refactorings, it can be useful to run `./x check`
+When doing simple refactoring, it can be useful to run `./x check`
 continuously. If you set up `rust-analyzer` as described above, this will be
 done for you every time you save a file. Here you are just checking that the
 compiler can **build**, but often that is all you need (e.g., when renaming a
@@ -356,3 +359,6 @@ Adding this to your shell's startup script (e.g. `.bashrc`) will automatically
 load this completion.
 
 [`src/etc/rust_analyzer_settings.json`]: https://github.com/rust-lang/rust/blob/master/src/etc/rust_analyzer_settings.json
+[`src/etc/rust_analyzer_eglot.el`]: https://github.com/rust-lang/rust/blob/master/src/etc/rust_analyzer_eglot.el
+[`src/etc/rust_analyzer_helix.toml`]: https://github.com/rust-lang/rust/blob/master/src/etc/rust_analyzer_helix.toml
+[`src/etc/pre-push.sh`]: https://github.com/rust-lang/rust/blob/master/src/etc/pre-push.sh