event_loop.rs

#![allow(non_snake_case)]

mod runner;

use std::cell::Cell;
use std::ffi::c_void;
use std::rc::Rc;
use std::sync::atomic::{AtomicU32, Ordering};
use std::sync::{Arc, Mutex, MutexGuard};
use std::time::{Duration, Instant};
use std::{mem, panic, ptr};

use runner::EventLoopRunner;
use windows_sys::Win32::Devices::HumanInterfaceDevice::MOUSE_MOVE_RELATIVE;
use windows_sys::Win32::Foundation::{
    CloseHandle, GetLastError, FALSE, HANDLE, HWND, LPARAM, LRESULT, POINT, RECT, WAIT_FAILED,
    WPARAM,
};
use windows_sys::Win32::Graphics::Gdi::{
    GetMonitorInfoW, MonitorFromRect, MonitorFromWindow, RedrawWindow, ScreenToClient,
    ValidateRect, MONITORINFO, MONITOR_DEFAULTTONULL, RDW_INTERNALPAINT, SC_SCREENSAVE,
};
use windows_sys::Win32::System::Ole::RevokeDragDrop;
use windows_sys::Win32::System::Threading::{
    CreateWaitableTimerExW, GetCurrentThreadId, SetWaitableTimer,
    CREATE_WAITABLE_TIMER_HIGH_RESOLUTION, INFINITE, TIMER_ALL_ACCESS,
};
use windows_sys::Win32::UI::Controls::{HOVER_DEFAULT, WM_MOUSELEAVE};
use windows_sys::Win32::UI::Input::Ime::{GCS_COMPSTR, GCS_RESULTSTR, ISC_SHOWUICOMPOSITIONWINDOW};
use windows_sys::Win32::UI::Input::KeyboardAndMouse::{
    ReleaseCapture, SetCapture, TrackMouseEvent, TME_LEAVE, TRACKMOUSEEVENT,
};
use windows_sys::Win32::UI::Input::Pointer::{
    POINTER_FLAG_DOWN, POINTER_FLAG_PRIMARY, POINTER_FLAG_UP, POINTER_FLAG_UPDATE,
};
use windows_sys::Win32::UI::Input::Touch::{
    CloseTouchInputHandle, GetTouchInputInfo, TOUCHEVENTF_DOWN, TOUCHEVENTF_MOVE,
    TOUCHEVENTF_PRIMARY, TOUCHEVENTF_UP, TOUCHINPUT,
};
use windows_sys::Win32::UI::Input::{RAWINPUT, RIM_TYPEKEYBOARD, RIM_TYPEMOUSE};
use windows_sys::Win32::UI::WindowsAndMessaging::{
    CreateWindowExW, DefWindowProcW, DestroyWindow, DispatchMessageW, GetClientRect, GetCursorPos,
    GetMenu, LoadCursorW, MsgWaitForMultipleObjectsEx, PeekMessageW, PostMessageW,
    RegisterClassExW, RegisterWindowMessageA, SetCursor, SetWindowPos, TranslateMessage,
    CREATESTRUCTW, GWL_STYLE, GWL_USERDATA, HTCAPTION, HTCLIENT, MINMAXINFO, MNC_CLOSE, MSG,
    MWMO_INPUTAVAILABLE, NCCALCSIZE_PARAMS, PM_REMOVE, PT_TOUCH, QS_ALLEVENTS, RI_MOUSE_HWHEEL,
    RI_MOUSE_WHEEL, SC_MINIMIZE, SC_RESTORE, SIZE_MAXIMIZED, SWP_NOACTIVATE, SWP_NOMOVE,
    SWP_NOSIZE, SWP_NOZORDER, WHEEL_DELTA, WINDOWPOS, WMSZ_BOTTOM, WMSZ_BOTTOMLEFT,
    WMSZ_BOTTOMRIGHT, WMSZ_LEFT, WMSZ_RIGHT, WMSZ_TOP, WMSZ_TOPLEFT, WMSZ_TOPRIGHT,
    WM_CAPTURECHANGED, WM_CLOSE, WM_CREATE, WM_DESTROY, WM_DPICHANGED, WM_ENTERSIZEMOVE,
    WM_EXITSIZEMOVE, WM_GETMINMAXINFO, WM_IME_COMPOSITION, WM_IME_ENDCOMPOSITION,
    WM_IME_SETCONTEXT, WM_IME_STARTCOMPOSITION, WM_INPUT, WM_KEYDOWN, WM_KEYUP, WM_KILLFOCUS,
    WM_LBUTTONDOWN, WM_LBUTTONUP, WM_MBUTTONDOWN, WM_MBUTTONUP, WM_MENUCHAR, WM_MOUSEHWHEEL,
    WM_MOUSEMOVE, WM_MOUSEWHEEL, WM_NCACTIVATE, WM_NCCALCSIZE, WM_NCCREATE, WM_NCDESTROY,
    WM_NCLBUTTONDOWN, WM_PAINT, WM_POINTERDOWN, WM_POINTERUP, WM_POINTERUPDATE, WM_RBUTTONDOWN,
    WM_RBUTTONUP, WM_SETCURSOR, WM_SETFOCUS, WM_SETTINGCHANGE, WM_SIZE, WM_SIZING, WM_SYSCOMMAND,
    WM_SYSKEYDOWN, WM_SYSKEYUP, WM_TOUCH, WM_WINDOWPOSCHANGED, WM_WINDOWPOSCHANGING,
    WM_XBUTTONDOWN, WM_XBUTTONUP, WNDCLASSEXW, WS_EX_LAYERED, WS_EX_NOACTIVATE, WS_EX_TOOLWINDOW,
    WS_EX_TRANSPARENT, WS_OVERLAPPED, WS_POPUP, WS_VISIBLE,
};

use super::window::set_skip_taskbar;
use super::SelectedCursor;
use crate::application::ApplicationHandler;
use crate::dpi::{PhysicalPosition, PhysicalSize};
use crate::error::{EventLoopError, RequestError};
use crate::event::{
    Event, FingerId as RootFingerId, Force, Ime, RawKeyEvent, SurfaceSizeWriter, TouchPhase,
    WindowEvent,
};
use crate::event_loop::{
    ActiveEventLoop as RootActiveEventLoop, ControlFlow, DeviceEvents,
    EventLoopProxy as RootEventLoopProxy, OwnedDisplayHandle as RootOwnedDisplayHandle,
};
use crate::keyboard::ModifiersState;
use crate::monitor::MonitorHandle as RootMonitorHandle;
use crate::platform::pump_events::PumpStatus;
use crate::platform_impl::platform::dark_mode::try_theme;
use crate::platform_impl::platform::dpi::{become_dpi_aware, dpi_to_scale_factor};
use crate::platform_impl::platform::drop_handler::FileDropHandler;
use crate::platform_impl::platform::icon::WinCursor;
use crate::platform_impl::platform::ime::ImeContext;
use crate::platform_impl::platform::keyboard::KeyEventBuilder;
use crate::platform_impl::platform::keyboard_layout::LAYOUT_CACHE;
use crate::platform_impl::platform::monitor::{self, MonitorHandle};
use crate::platform_impl::platform::window::InitData;
use crate::platform_impl::platform::window_state::{
    CursorFlags, ImeState, WindowFlags, WindowState,
};
use crate::platform_impl::platform::{raw_input, util, wrap_device_id, FingerId, Fullscreen};
use crate::platform_impl::Window;
use crate::utils::Lazy;
use crate::window::{
    CustomCursor as RootCustomCursor, CustomCursorSource, Theme, Window as CoreWindow,
    WindowAttributes, WindowId,
};

pub(crate) struct WindowData {
    pub window_state: Arc<Mutex<WindowState>>,
    pub event_loop_runner: Rc<EventLoopRunner>,
    pub key_event_builder: KeyEventBuilder,
    pub _file_drop_handler: Option<FileDropHandler>,
    pub userdata_removed: Cell<bool>,
    pub recurse_depth: Cell<u32>,
}

impl WindowData {
    fn send_event(&self, event: Event) {
        self.event_loop_runner.send_event(event);
    }

    fn window_state_lock(&self) -> MutexGuard<'_, WindowState> {
        self.window_state.lock().unwrap()
    }
}

struct ThreadMsgTargetData {
    event_loop_runner: Rc<EventLoopRunner>,
}

impl ThreadMsgTargetData {
    fn send_event(&self, event: Event) {
        self.event_loop_runner.send_event(event);
    }
}

/// The result of a subclass procedure (the message handling callback)
#[derive(Clone, Copy)]
pub(crate) enum ProcResult {
    DefWindowProc(WPARAM),
    Value(isize),
}

pub struct EventLoop {
    window_target: ActiveEventLoop,
    msg_hook: Option<Box<dyn FnMut(*const c_void) -> bool + 'static>>,
    // It is a timer used on timed waits.
    // It is created lazily in case if we have `ControlFlow::WaitUntil`.
    // Keep it as a field to avoid recreating it on every `ControlFlow::WaitUntil`.
    high_precision_timer: Option<HANDLE>,
}

pub(crate) struct PlatformSpecificEventLoopAttributes {
    pub(crate) any_thread: bool,
    pub(crate) dpi_aware: bool,
    pub(crate) msg_hook: Option<Box<dyn FnMut(*const c_void) -> bool + 'static>>,
}

impl Default for PlatformSpecificEventLoopAttributes {
    fn default() -> Self {
        Self { any_thread: false, dpi_aware: true, msg_hook: None }
    }
}

impl PartialEq for PlatformSpecificEventLoopAttributes {
    fn eq(&self, other: &Self) -> bool {
        self.any_thread.eq(&other.any_thread)
            && self.dpi_aware.eq(&other.dpi_aware)
            && match (&self.msg_hook, &other.msg_hook) {
                (Some(this), Some(other)) => std::ptr::eq(&this, &other),
                (None, None) => true,
                _ => false,
            }
    }
}

impl Eq for PlatformSpecificEventLoopAttributes {}

impl std::hash::Hash for PlatformSpecificEventLoopAttributes {
    fn hash<H: std::hash::Hasher>(&self, state: &mut H) {
        self.any_thread.hash(state);
        self.dpi_aware.hash(state);
        std::ptr::hash(&self.msg_hook, state);
    }
}

pub struct ActiveEventLoop {
    thread_id: u32,
    thread_msg_target: HWND,
    pub(crate) runner_shared: Rc<EventLoopRunner>,
}

impl EventLoop {
    pub(crate) fn new(
        attributes: &mut PlatformSpecificEventLoopAttributes,
    ) -> Result<Self, EventLoopError> {
        let thread_id = unsafe { GetCurrentThreadId() };

        if !attributes.any_thread && thread_id != main_thread_id() {
            panic!(
                "Initializing the event loop outside of the main thread is a significant \
                 cross-platform compatibility hazard. If you absolutely need to create an \
                 EventLoop on a different thread, you can use the \
                 `EventLoopBuilderExtWindows::with_any_thread` function."
            );
        }

        if attributes.dpi_aware {
            become_dpi_aware();
        }

        let thread_msg_target = create_event_target_window();

        let runner_shared = Rc::new(EventLoopRunner::new(thread_msg_target));

        insert_event_target_window_data(thread_msg_target, runner_shared.clone());
        raw_input::register_all_mice_and_keyboards_for_raw_input(
            thread_msg_target,
            Default::default(),
        );

        Ok(EventLoop {
            window_target: ActiveEventLoop { thread_id, thread_msg_target, runner_shared },
            msg_hook: attributes.msg_hook.take(),
            high_precision_timer: None,
        })
    }

    pub fn window_target(&self) -> &dyn RootActiveEventLoop {
        &self.window_target
    }

    pub fn run_app<A: ApplicationHandler>(mut self, app: A) -> Result<(), EventLoopError> {
        self.run_app_on_demand(app)
    }

    pub fn run_app_on_demand<A: ApplicationHandler>(
        &mut self,
        mut app: A,
    ) -> Result<(), EventLoopError> {
        self.window_target.clear_exit();
        {
            let runner = &self.window_target.runner_shared;

            let event_loop_windows_ref = &self.window_target;
            // # Safety
            // We make sure to call runner.clear_event_handler() before
            // returning
            unsafe {
                runner.set_event_handler(move |event| match event {
                    Event::NewEvents(cause) => app.new_events(event_loop_windows_ref, cause),
                    Event::WindowEvent { window_id, event } => {
                        app.window_event(event_loop_windows_ref, window_id, event)
                    },
                    Event::DeviceEvent { device_id, event } => {
                        app.device_event(event_loop_windows_ref, device_id, event)
                    },
                    Event::UserWakeUp => app.proxy_wake_up(event_loop_windows_ref),
                    Event::Suspended => app.suspended(event_loop_windows_ref),
                    Event::Resumed => app.resumed(event_loop_windows_ref),
                    Event::CreateSurfaces => app.can_create_surfaces(event_loop_windows_ref),
                    Event::AboutToWait => app.about_to_wait(event_loop_windows_ref),
                    Event::LoopExiting => app.exiting(event_loop_windows_ref),
                    Event::MemoryWarning => app.memory_warning(event_loop_windows_ref),
                });
            }
        }

        let exit_code = loop {
            self.dispatch_peeked_messages();

            if let Some(code) = self.exit_code() {
                break code;
            }

            self.wait_for_messages(None);
        };

        let runner = &self.window_target.runner_shared;
        runner.loop_destroyed();

        // # Safety
        // We assume that this will effectively call `runner.clear_event_handler()`
        // to meet the safety requirements for calling `runner.set_event_handler()` above.
        runner.reset_runner();

        if exit_code == 0 {
            Ok(())
        } else {
            Err(EventLoopError::ExitFailure(exit_code))
        }
    }

    pub fn pump_app_events<A: ApplicationHandler>(
        &mut self,
        timeout: Option<Duration>,
        mut app: A,
    ) -> PumpStatus {
        {
            let runner = &self.window_target.runner_shared;
            let event_loop_windows_ref = &self.window_target;
            // let user_event_receiver = &self.user_event_receiver;

            // # Safety
            // We make sure to call runner.clear_event_handler() before
            // returning
            //
            // Note: we're currently assuming nothing can panic and unwind
            // to leave the runner in an unsound state with an associated
            // event handler.
            unsafe {
                runner.set_event_handler(move |event| match event {
                    Event::NewEvents(cause) => app.new_events(event_loop_windows_ref, cause),
                    Event::WindowEvent { window_id, event } => {
                        app.window_event(event_loop_windows_ref, window_id, event)
                    },
                    Event::DeviceEvent { device_id, event } => {
                        app.device_event(event_loop_windows_ref, device_id, event)
                    },
                    Event::UserWakeUp => app.proxy_wake_up(event_loop_windows_ref),
                    Event::Suspended => app.suspended(event_loop_windows_ref),
                    Event::Resumed => app.resumed(event_loop_windows_ref),
                    Event::CreateSurfaces => app.can_create_surfaces(event_loop_windows_ref),
                    Event::AboutToWait => app.about_to_wait(event_loop_windows_ref),
                    Event::LoopExiting => app.exiting(event_loop_windows_ref),
                    Event::MemoryWarning => app.memory_warning(event_loop_windows_ref),
                });

                runner.wakeup();
            }
        }

        if self.exit_code().is_none() {
            self.wait_for_messages(timeout);
            self.dispatch_peeked_messages();
        }

        let runner = &self.window_target.runner_shared;

        let status = if let Some(code) = runner.exit_code() {
            runner.loop_destroyed();

            // Immediately reset the internal state for the loop to allow
            // the loop to be run more than once.
            runner.reset_runner();
            PumpStatus::Exit(code)
        } else {
            runner.prepare_wait();
            PumpStatus::Continue
        };

        // We wait until we've checked for an exit status before clearing the
        // application callback, in case we need to dispatch a LoopExiting event
        //
        // # Safety
        // This pairs up with our call to `runner.set_event_handler` and ensures
        // the application's callback can't be held beyond its lifetime.
        runner.clear_event_handler();

        status
    }

    /// Waits until new event messages arrive to be peeked.
    /// Doesn't peek messages itself.
    ///
    /// Parameter timeout is optional. This method would wait for the smaller timeout
    /// between the argument and a timeout from control flow.
    fn wait_for_messages(&mut self, mut timeout: Option<Duration>) {
        // Set upper limit for waiting time to avoid overflows.
        // I chose 50 days as a limit because it is used in dur2timeout.
        const FIFTY_DAYS: Duration = Duration::from_secs(50_u64 * 24 * 60 * 60);
        // Waitable timers use 100 ns intervals to indicate due time.
        // https://learn.microsoft.com/en-us/windows/win32/api/synchapi/nf-synchapi-setwaitabletimer#parameters
        // And there is no point waiting using other ways for such small timings
        // because they are even less precise (can overshoot by few ms).
        const MIN_WAIT: Duration = Duration::from_nanos(100);

        fn create_high_precision_timer() -> Option<HANDLE> {
            unsafe {
                let handle: HANDLE = CreateWaitableTimerExW(
                    ptr::null(),
                    ptr::null(),
                    CREATE_WAITABLE_TIMER_HIGH_RESOLUTION,
                    TIMER_ALL_ACCESS,
                );
                // CREATE_WAITABLE_TIMER_HIGH_RESOLUTION is supported only after
                // Win10 1803 but it is already default option for rustc
                // (std uses it to implement `std::thread::sleep`).
                if handle == 0 {
                    None
                } else {
                    Some(handle)
                }
            }
        }

        /// This function should not return error if parameters valid
        /// but there is no guarantee about that at MSDN docs
        /// so we return result of GetLastError if fail.
        /// ## Safety
        /// timer must be a valid timer to a handle created by create_high_precision_timer.
        /// timeout divided by 100 nanoseconds must be more than 0 and less than i64::MAX.
        unsafe fn set_high_precision_timer(timer: HANDLE, timeout: Duration) -> Result<(), u32> {
            const INTERVAL_NS: u32 = MIN_WAIT.subsec_nanos();
            const INTERVALS_IN_SEC: u64 =
                (Duration::from_secs(1).as_nanos() / INTERVAL_NS as u128) as u64;
            let intervals_to_wait: u64 = timeout.as_secs() * INTERVALS_IN_SEC
                + u64::from(timeout.subsec_nanos() / INTERVAL_NS);
            debug_assert!(
                intervals_to_wait < i64::MAX as u64,
                "Must be called with smaller duration",
            );
            // Use negative time to indicate relative time.
            let due_time: i64 = -(intervals_to_wait as i64);
            unsafe {
                let set_result = SetWaitableTimer(timer, &due_time, 0, None, ptr::null(), FALSE);
                if set_result != FALSE {
                    Ok(())
                } else {
                    Err(GetLastError())
                }
            }
        }

        let runner = &self.window_target.runner_shared;

        // We aim to be consistent with the MacOS backend which has a RunLoop
        // observer that will dispatch AboutToWait when about to wait for
        // events, and NewEvents after the RunLoop wakes up.
        //
        // We emulate similar behaviour by treating `GetMessage` as our wait
        // point and wake up point (when it returns) and we drain all other
        // pending messages via `PeekMessage` until we come back to "wait" via
        // `GetMessage`
        //
        runner.prepare_wait();

        {
            let control_flow_timeout = match runner.control_flow() {
                ControlFlow::Wait => None,
                ControlFlow::Poll => Some(Duration::ZERO),
                ControlFlow::WaitUntil(wait_deadline) => {
                    let start = Instant::now();
                    Some(wait_deadline.saturating_duration_since(start))
                },
            };
            timeout = min_timeout(timeout, control_flow_timeout);
        }

        timeout = timeout.map(|t| t.min(FIFTY_DAYS));
        if timeout == Some(Duration::ZERO) {
            // Do not wait if we don't have time.
            return;
        }
        // If timeout is less than minimally supported by Windows,
        // increase it to that minimum. Who want less than microsecond delays anyway?
        timeout = timeout.map(|t| t.max(MIN_WAIT));

        if timeout.is_some() && self.high_precision_timer.is_none() {
            self.high_precision_timer = create_high_precision_timer();
        }

        let use_timer: bool;
        if let (Some(handle), Some(timeout)) = (self.high_precision_timer, timeout) {
            let res = unsafe { set_high_precision_timer(handle, timeout) };
            if let Err(error_code) = res {
                // We successfully got timer but failed to set it?
                // Should be some bug in our code.
                tracing::trace!("Failed to set high precision timer: last error {}", error_code);
                use_timer = false;
            } else {
                use_timer = true;
            }
        } else {
            use_timer = false;
        }

        unsafe {
            // Either:
            //  1. User wants to wait indefinely if timeout is not set.
            //  2. We failed to get and set high precision timer and we need something instead of
            //     it.
            let wait_duration_ms = timeout.map(dur2timeout).unwrap_or(INFINITE);

            let (num_handles, handle_ptr) = if use_timer {
                (1, self.high_precision_timer.as_ref().unwrap() as *const _)
            } else {
                (0, ptr::null())
            };

            let result = MsgWaitForMultipleObjectsEx(
                num_handles,
                handle_ptr,
                wait_duration_ms,
                QS_ALLEVENTS,
                MWMO_INPUTAVAILABLE,
            );
            if result == WAIT_FAILED {
                // Well, nothing smart to do in such case.
                // Treat it as spurious wake up.
                tracing::warn!(
                    "Failed to MsgWaitForMultipleObjectsEx: error code {}",
                    GetLastError(),
                );
            }
        }
    }

    /// Dispatch all queued messages via `PeekMessageW`
    fn dispatch_peeked_messages(&mut self) {
        let runner = &self.window_target.runner_shared;

        // Before we potentially exit, make sure to consistently emit an event for the wake up
        runner.wakeup();

        // We generally want to continue dispatching all pending messages
        // but we also allow dispatching to be interrupted as a means to
        // ensure the `pump_events` won't indefinitely block an external
        // event loop if there are too many pending events. This interrupt
        // flag will be set after dispatching `RedrawRequested` events.
        runner.interrupt_msg_dispatch.set(false);

        // # Safety
        // The Windows API has no documented requirement for bitwise
        // initializing a `MSG` struct (it can be uninitialized memory for the C
        // API) and there's no API to construct or initialize a `MSG`. This
        // is the simplest way avoid uninitialized memory in Rust
        let mut msg: MSG = unsafe { mem::zeroed() };

        loop {
            unsafe {
                if PeekMessageW(&mut msg, 0, 0, 0, PM_REMOVE) == false.into() {
                    break;
                }

                let handled = if let Some(callback) = self.msg_hook.as_deref_mut() {
                    callback(&mut msg as *mut _ as *mut _)
                } else {
                    false
                };
                if !handled {
                    TranslateMessage(&msg);
                    DispatchMessageW(&msg);
                }
            }

            if let Err(payload) = runner.take_panic_error() {
                runner.reset_runner();
                panic::resume_unwind(payload);
            }

            if let Some(_code) = runner.exit_code() {
                break;
            }

            if runner.interrupt_msg_dispatch.get() {
                break;
            }
        }
    }

    fn exit_code(&self) -> Option<i32> {
        self.window_target.exit_code()
    }
}

impl ActiveEventLoop {
    #[inline(always)]
    pub(crate) fn create_thread_executor(&self) -> EventLoopThreadExecutor {
        EventLoopThreadExecutor { thread_id: self.thread_id, target_window: self.thread_msg_target }
    }

    pub(crate) fn clear_exit(&self) {
        self.runner_shared.clear_exit();
    }

    fn exit_code(&self) -> Option<i32> {
        self.runner_shared.exit_code()
    }
}

impl RootActiveEventLoop for ActiveEventLoop {
    fn create_proxy(&self) -> RootEventLoopProxy {
        let event_loop_proxy = EventLoopProxy { target_window: self.thread_msg_target };
        RootEventLoopProxy { event_loop_proxy }
    }

    fn create_window(
        &self,
        window_attributes: WindowAttributes,
    ) -> Result<Box<dyn CoreWindow>, RequestError> {
        Ok(Box::new(Window::new(self, window_attributes)?))
    }

    fn create_custom_cursor(
        &self,
        source: CustomCursorSource,
    ) -> Result<RootCustomCursor, RequestError> {
        Ok(RootCustomCursor { inner: WinCursor::new(&source.inner.0)? })
    }

    fn available_monitors(&self) -> Box<dyn Iterator<Item = crate::monitor::MonitorHandle>> {
        Box::new(
            monitor::available_monitors()
                .into_iter()
                .map(|inner| crate::monitor::MonitorHandle { inner }),
        )
    }

    fn primary_monitor(&self) -> Option<crate::monitor::MonitorHandle> {
        Some(RootMonitorHandle { inner: monitor::primary_monitor() })
    }

    fn exiting(&self) -> bool {
        self.runner_shared.exit_code().is_some()
    }

    fn system_theme(&self) -> Option<Theme> {
        Some(if super::dark_mode::should_use_dark_mode() { Theme::Dark } else { Theme::Light })
    }

    fn listen_device_events(&self, allowed: DeviceEvents) {
        raw_input::register_all_mice_and_keyboards_for_raw_input(self.thread_msg_target, allowed);
    }

    fn set_control_flow(&self, control_flow: ControlFlow) {
        self.runner_shared.set_control_flow(control_flow)
    }

    fn control_flow(&self) -> ControlFlow {
        self.runner_shared.control_flow()
    }

    fn exit(&self) {
        self.runner_shared.set_exit_code(0)
    }

    fn owned_display_handle(&self) -> RootOwnedDisplayHandle {
        RootOwnedDisplayHandle { platform: OwnedDisplayHandle }
    }

    fn rwh_06_handle(&self) -> &dyn rwh_06::HasDisplayHandle {
        self
    }
}

#[cfg(feature = "rwh_06")]
impl rwh_06::HasDisplayHandle for ActiveEventLoop {
    fn display_handle(&self) -> Result<rwh_06::DisplayHandle<'_>, rwh_06::HandleError> {
        let raw = rwh_06::RawDisplayHandle::Windows(rwh_06::WindowsDisplayHandle::new());
        unsafe { Ok(rwh_06::DisplayHandle::borrow_raw(raw)) }
    }
}

#[derive(Clone, PartialEq, Eq)]
pub(crate) struct OwnedDisplayHandle;

impl OwnedDisplayHandle {
    #[cfg(feature = "rwh_06")]
    #[inline]
    pub fn raw_display_handle_rwh_06(
        &self,
    ) -> Result<rwh_06::RawDisplayHandle, rwh_06::HandleError> {
        Ok(rwh_06::WindowsDisplayHandle::new().into())
    }
}

/// Returns the id of the main thread.
///
/// Windows has no real API to check if the current executing thread is the "main thread", unlike
/// macOS.
///
/// Windows will let us look up the current thread's id, but there's no API that lets us check what
/// the id of the main thread is. We would somehow need to get the main thread's id before a
/// developer could spin off any other threads inside of the main entrypoint in order to emulate the
/// capabilities of other platforms.
///
/// We can get the id of the main thread by using CRT initialization. CRT initialization can be used
/// to setup global state within a program. The OS will call a list of function pointers which
/// assign values to a static variable. To have get a hold of the main thread id, we need to place
/// our function pointer inside of the `.CRT$XCU` section so it is called before the main
/// entrypoint.
///
/// Full details of CRT initialization can be found here:
/// <https://docs.microsoft.com/en-us/cpp/c-runtime-library/crt-initialization?view=msvc-160>
fn main_thread_id() -> u32 {
    static mut MAIN_THREAD_ID: u32 = 0;

    /// Function pointer used in CRT initialization section to set the above static field's value.

    // Mark as used so this is not removable.
    #[used]
    #[allow(non_upper_case_globals)]
    // Place the function pointer inside of CRT initialization section so it is loaded before
    // main entrypoint.
    //
    // See: https://doc.rust-lang.org/stable/reference/abi.html#the-link_section-attribute
    #[link_section = ".CRT$XCU"]
    static INIT_MAIN_THREAD_ID: unsafe fn() = {
        unsafe fn initer() {
            unsafe { MAIN_THREAD_ID = GetCurrentThreadId() };
        }
        initer
    };

    unsafe { MAIN_THREAD_ID }
}

/// Returns the minimum `Option<Duration>`, taking into account that `None`
/// equates to an infinite timeout, not a zero timeout (so can't just use
/// `Option::min`)
fn min_timeout(a: Option<Duration>, b: Option<Duration>) -> Option<Duration> {
    a.map_or(b, |a_timeout| b.map_or(Some(a_timeout), |b_timeout| Some(a_timeout.min(b_timeout))))
}

// Implementation taken from https://github.com/rust-lang/rust/blob/db5476571d9b27c862b95c1e64764b0ac8980e23/src/libstd/sys/windows/mod.rs
fn dur2timeout(dur: Duration) -> u32 {
    // Note that a duration is a (u64, u32) (seconds, nanoseconds) pair, and the
    // timeouts in windows APIs are typically u32 milliseconds. To translate, we
    // have two pieces to take care of:
    //
    // * Nanosecond precision is rounded up
    // * Greater than u32::MAX milliseconds (50 days) is rounded up to INFINITE (never time out).
    dur.as_secs()
        .checked_mul(1000)
        .and_then(|ms| ms.checked_add((dur.subsec_nanos() as u64) / 1_000_000))
        .and_then(
            |ms| {
                if dur.subsec_nanos() % 1_000_000 > 0 {
                    ms.checked_add(1)
                } else {
                    Some(ms)
                }
            },
        )
        .map(|ms| if ms > u32::MAX as u64 { INFINITE } else { ms as u32 })
        .unwrap_or(INFINITE)
}

impl Drop for EventLoop {
    fn drop(&mut self) {
        unsafe {
            DestroyWindow(self.window_target.thread_msg_target);
            if let Some(timer_handle) = self.high_precision_timer {
                CloseHandle(timer_handle);
            }
        }
    }
}

pub(crate) struct EventLoopThreadExecutor {
    thread_id: u32,
    target_window: HWND,
}

unsafe impl Send for EventLoopThreadExecutor {}
unsafe impl Sync for EventLoopThreadExecutor {}

impl EventLoopThreadExecutor {
    /// Check to see if we're in the parent event loop's thread.
    pub(super) fn in_event_loop_thread(&self) -> bool {
        let cur_thread_id = unsafe { GetCurrentThreadId() };
        self.thread_id == cur_thread_id
    }

    /// Executes a function in the event loop thread. If we're already in the event loop thread,
    /// we just call the function directly.
    ///
    /// The `Inserted` can be used to inject a `WindowState` for the callback to use. The state is
    /// removed automatically if the callback receives a `WM_CLOSE` message for the window.
    ///
    /// Note that if you are using this to change some property of a window and updating
    /// `WindowState` then you should call this within the lock of `WindowState`. Otherwise the
    /// events may be sent to the other thread in different order to the one in which you set
    /// `WindowState`, leaving them out of sync.
    ///
    /// Note that we use a FnMut instead of a FnOnce because we're too lazy to create an equivalent
    /// to the unstable FnBox.
    pub(super) fn execute_in_thread<F>(&self, mut function: F)
    where
        F: FnMut() + Send + 'static,
    {
        unsafe {
            if self.in_event_loop_thread() {
                function();
            } else {
                // We double-box because the first box is a fat pointer.
                let boxed2: ThreadExecFn = Box::new(Box::new(function));

                let raw = Box::into_raw(boxed2);

                let res = PostMessageW(self.target_window, EXEC_MSG_ID.get(), raw as usize, 0);
                assert!(res != false.into(), "PostMessage failed; is the messages queue full?");
            }
        }
    }
}

type ThreadExecFn = Box<Box<dyn FnMut()>>;

#[derive(Clone)]
pub struct EventLoopProxy {
    target_window: HWND,
}

unsafe impl Send for EventLoopProxy {}

impl EventLoopProxy {
    pub fn wake_up(&self) {
        unsafe { PostMessageW(self.target_window, USER_EVENT_MSG_ID.get(), 0, 0) };
    }
}

/// A lazily-initialized window message ID.
pub struct LazyMessageId {
    /// The ID.
    id: AtomicU32,

    /// The name of the message.
    name: &'static str,
}

/// An invalid custom window ID.
const INVALID_ID: u32 = 0x0;

impl LazyMessageId {
    /// Create a new `LazyId`.
    const fn new(name: &'static str) -> Self {
        Self { id: AtomicU32::new(INVALID_ID), name }
    }

    /// Get the message ID.
    pub fn get(&self) -> u32 {
        // Load the ID.
        let id = self.id.load(Ordering::Relaxed);

        if id != INVALID_ID {
            return id;
        }

        // Register the message.
        // SAFETY: We are sure that the pointer is a valid C string ending with '\0'.
        assert!(self.name.ends_with('\0'));
        let new_id = unsafe { RegisterWindowMessageA(self.name.as_ptr()) };

        assert_ne!(
            new_id,
            0,
            "RegisterWindowMessageA returned zero for '{}': {}",
            self.name,
            std::io::Error::last_os_error()
        );

        // Store the new ID. Since `RegisterWindowMessageA` returns the same value for any given
        // string, the target value will always either be a). `INVALID_ID` or b). the
        // correct ID. Therefore a compare-and-swap operation here (or really any
        // consideration) is never necessary.
        self.id.store(new_id, Ordering::Relaxed);

        new_id
    }
}

// Message sent by the `EventLoopProxy` when we want to wake up the thread.
// WPARAM and LPARAM are unused.
static USER_EVENT_MSG_ID: LazyMessageId = LazyMessageId::new("Winit::WakeupMsg\0");
// Message sent when we want to execute a closure in the thread.
// WPARAM contains a Box<Box<dyn FnMut()>> that must be retrieved with `Box::from_raw`,
// and LPARAM is unused.
static EXEC_MSG_ID: LazyMessageId = LazyMessageId::new("Winit::ExecMsg\0");
// Message sent by a `Window` when it wants to be destroyed by the main thread.
// WPARAM and LPARAM are unused.
pub(crate) static DESTROY_MSG_ID: LazyMessageId = LazyMessageId::new("Winit::DestroyMsg\0");
// WPARAM is a bool specifying the `WindowFlags::MARKER_RETAIN_STATE_ON_SIZE` flag. See the
// documentation in the `window_state` module for more information.
pub(crate) static SET_RETAIN_STATE_ON_SIZE_MSG_ID: LazyMessageId =
    LazyMessageId::new("Winit::SetRetainMaximized\0");
static THREAD_EVENT_TARGET_WINDOW_CLASS: Lazy<Vec<u16>> =
    Lazy::new(|| util::encode_wide("Winit Thread Event Target"));
/// When the taskbar is created, it registers a message with the "TaskbarCreated" string and then
/// broadcasts this message to all top-level windows <https://docs.microsoft.com/en-us/windows/win32/shell/taskbar#taskbar-creation-notification>
pub(crate) static TASKBAR_CREATED: LazyMessageId = LazyMessageId::new("TaskbarCreated\0");

fn create_event_target_window() -> HWND {
    use windows_sys::Win32::UI::WindowsAndMessaging::{CS_HREDRAW, CS_VREDRAW};
    unsafe {
        let class = WNDCLASSEXW {
            cbSize: mem::size_of::<WNDCLASSEXW>() as u32,
            style: CS_HREDRAW | CS_VREDRAW,
            lpfnWndProc: Some(thread_event_target_callback),
            cbClsExtra: 0,
            cbWndExtra: 0,
            hInstance: util::get_instance_handle(),
            hIcon: 0,
            hCursor: 0, // must be null in order for cursor state to work properly
            hbrBackground: 0,
            lpszMenuName: ptr::null(),
            lpszClassName: THREAD_EVENT_TARGET_WINDOW_CLASS.as_ptr(),
            hIconSm: 0,
        };

        RegisterClassExW(&class);
    }

    unsafe {
        // WS_EX_TOOLWINDOW prevents this window from ever showing up in the taskbar, which
        // we want to avoid. If you remove this style, this window won't show up in the
        // taskbar *initially*, but it can show up at some later point. This can sometimes
        // happen on its own after several hours have passed, although this has proven
        // difficult to reproduce. Alternatively, it can be manually triggered by killing
        // `explorer.exe` and then starting the process back up.
        // It is unclear why the bug is triggered by waiting for several hours.
        let window = CreateWindowExW(
            WS_EX_NOACTIVATE | WS_EX_TRANSPARENT | WS_EX_LAYERED | WS_EX_TOOLWINDOW,
            THREAD_EVENT_TARGET_WINDOW_CLASS.as_ptr(),
            ptr::null(),
            WS_OVERLAPPED,
            0,
            0,
            0,
            0,
            0,
            0,
            util::get_instance_handle(),
            ptr::null(),
        );

        super::set_window_long(
            window,
            GWL_STYLE,
            // The window technically has to be visible to receive WM_PAINT messages (which are
            // used for delivering events during resizes), but it isn't displayed to
            // the user because of the LAYERED style.
            (WS_VISIBLE | WS_POPUP) as isize,
        );
        window
    }
}

fn insert_event_target_window_data(
    thread_msg_target: HWND,
    event_loop_runner: Rc<EventLoopRunner>,
) {
    let userdata = ThreadMsgTargetData { event_loop_runner };
    let input_ptr = Box::into_raw(Box::new(userdata));

    unsafe { super::set_window_long(thread_msg_target, GWL_USERDATA, input_ptr as isize) };
}

/// Capture mouse input, allowing `window` to receive mouse events when the cursor is outside of
/// the window.
unsafe fn capture_mouse(window: HWND, window_state: &mut WindowState) {
    window_state.mouse.capture_count += 1;
    unsafe { SetCapture(window) };
}

/// Release mouse input, stopping windows on this thread from receiving mouse input when the cursor
/// is outside the window.
unsafe fn release_mouse(mut window_state: MutexGuard<'_, WindowState>) {
    window_state.mouse.capture_count = window_state.mouse.capture_count.saturating_sub(1);
    if window_state.mouse.capture_count == 0 {
        // ReleaseCapture() causes a WM_CAPTURECHANGED where we lock the window_state.
        drop(window_state);
        unsafe { ReleaseCapture() };
    }
}

fn normalize_pointer_pressure(pressure: u32) -> Option<Force> {
    match pressure {
        1..=1024 => Some(Force::Normalized(pressure as f64 / 1024.0)),
        _ => None,
    }
}

/// Emit a `ModifiersChanged` event whenever modifiers have changed.
/// Returns the current modifier state
fn update_modifiers(window: HWND, userdata: &WindowData) {
    use crate::event::WindowEvent::ModifiersChanged;

    let modifiers = {
        let mut layouts = LAYOUT_CACHE.lock().unwrap();
        layouts.get_agnostic_mods()
    };

    let mut window_state = userdata.window_state.lock().unwrap();
    if window_state.modifiers_state != modifiers {
        window_state.modifiers_state = modifiers;

        // Drop lock
        drop(window_state);

        userdata.send_event(Event::WindowEvent {
            window_id: WindowId::from_raw(window as usize),
            event: ModifiersChanged(modifiers.into()),
        });
    }
}

unsafe fn gain_active_focus(window: HWND, userdata: &WindowData) {
    use crate::event::WindowEvent::Focused;

    update_modifiers(window, userdata);

    userdata.send_event(Event::WindowEvent {
        window_id: WindowId::from_raw(window as usize),
        event: Focused(true),
    });
}

unsafe fn lose_active_focus(window: HWND, userdata: &WindowData) {
    use crate::event::WindowEvent::{Focused, ModifiersChanged};

    userdata.window_state_lock().modifiers_state = ModifiersState::empty();
    userdata.send_event(Event::WindowEvent {
        window_id: WindowId::from_raw(window as usize),
        event: ModifiersChanged(ModifiersState::empty().into()),
    });

    userdata.send_event(Event::WindowEvent {
        window_id: WindowId::from_raw(window as usize),
        event: Focused(false),
    });
}

/// Any window whose callback is configured to this function will have its events propagated
/// through the events loop of the thread the window was created in.
// This is the callback that is called by `DispatchMessage` in the events loop.
//
// Returning 0 tells the Win32 API that the message has been processed.
// FIXME: detect WM_DWMCOMPOSITIONCHANGED and call DwmEnableBlurBehindWindow if necessary
pub(super) unsafe extern "system" fn public_window_callback(
    window: HWND,
    msg: u32,
    wparam: WPARAM,
    lparam: LPARAM,
) -> LRESULT {
    let userdata = unsafe { super::get_window_long(window, GWL_USERDATA) };

    let userdata_ptr = match (userdata, msg) {
        (0, WM_NCCREATE) => {
            let createstruct = unsafe { &mut *(lparam as *mut CREATESTRUCTW) };
            let initdata = unsafe { &mut *(createstruct.lpCreateParams as *mut InitData<'_>) };

            let result = match unsafe { initdata.on_nccreate(window) } {
                Some(userdata) => unsafe {
                    super::set_window_long(window, GWL_USERDATA, userdata as _);
                    DefWindowProcW(window, msg, wparam, lparam)
                },
                None => -1, // failed to create the window
            };

            return result;
        },
        // Getting here should quite frankly be impossible,
        // but we'll make window creation fail here just in case.
        (0, WM_CREATE) => return -1,
        (_, WM_CREATE) => unsafe {
            let createstruct = &mut *(lparam as *mut CREATESTRUCTW);
            let initdata = createstruct.lpCreateParams;
            let initdata = &mut *(initdata as *mut InitData<'_>);

            initdata.on_create();
            return DefWindowProcW(window, msg, wparam, lparam);
        },
        (0, _) => return unsafe { DefWindowProcW(window, msg, wparam, lparam) },
        _ => userdata as *mut WindowData,
    };

    let (result, userdata_removed, recurse_depth) = {
        let userdata = unsafe { &*(userdata_ptr) };

        userdata.recurse_depth.set(userdata.recurse_depth.get() + 1);

        let result = unsafe { public_window_callback_inner(window, msg, wparam, lparam, userdata) };

        let userdata_removed = userdata.userdata_removed.get();
        let recurse_depth = userdata.recurse_depth.get() - 1;
        userdata.recurse_depth.set(recurse_depth);

        (result, userdata_removed, recurse_depth)
    };

    if userdata_removed && recurse_depth == 0 {
        drop(unsafe { Box::from_raw(userdata_ptr) });
    }

    result
}

unsafe fn public_window_callback_inner(
    window: HWND,
    msg: u32,
    wparam: WPARAM,
    lparam: LPARAM,
    userdata: &WindowData,
) -> LRESULT {
    let mut result = ProcResult::DefWindowProc(wparam);

    // Send new modifiers before sending key events.
    let mods_changed_callback = || match msg {
        WM_KEYDOWN | WM_SYSKEYDOWN | WM_KEYUP | WM_SYSKEYUP => {
            update_modifiers(window, userdata);
            result = ProcResult::Value(0);
        },
        _ => (),
    };
    userdata
        .event_loop_runner
        .catch_unwind(mods_changed_callback)
        .unwrap_or_else(|| result = ProcResult::Value(-1));

    let keyboard_callback = || {
        use crate::event::WindowEvent::KeyboardInput;
        let events =
            userdata.key_event_builder.process_message(window, msg, wparam, lparam, &mut result);
        for event in events {
            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: KeyboardInput {
                    device_id: None,
                    event: event.event,
                    is_synthetic: event.is_synthetic,
                },
            });
        }
    };
    userdata
        .event_loop_runner
        .catch_unwind(keyboard_callback)
        .unwrap_or_else(|| result = ProcResult::Value(-1));

    // I decided to bind the closure to `callback` and pass it to catch_unwind rather than passing
    // the closure to catch_unwind directly so that the match body indentation wouldn't change and
    // the git blame and history would be preserved.
    let callback = || match msg {
        WM_NCCALCSIZE => {
            let window_flags = userdata.window_state_lock().window_flags;
            if wparam == 0 || window_flags.contains(WindowFlags::MARKER_DECORATIONS) {
                result = ProcResult::DefWindowProc(wparam);
                return;
            }

            let params = unsafe { &mut *(lparam as *mut NCCALCSIZE_PARAMS) };

            if util::is_maximized(window) {
                // Limit the window size when maximized to the current monitor.
                // Otherwise it would include the non-existent decorations.
                //
                // Use `MonitorFromRect` instead of `MonitorFromWindow` to select
                // the correct monitor here.
                // See https://github.com/MicrosoftEdge/WebView2Feedback/issues/2549
                let monitor = unsafe { MonitorFromRect(&params.rgrc[0], MONITOR_DEFAULTTONULL) };
                if let Ok(monitor_info) = monitor::get_monitor_info(monitor) {
                    params.rgrc[0] = monitor_info.monitorInfo.rcWork;
                }
            } else if window_flags.contains(WindowFlags::MARKER_UNDECORATED_SHADOW) {
                // Extend the client area to cover the whole non-client area.
                // https://docs.microsoft.com/en-us/windows/win32/winmsg/wm-nccalcsize#remarks
                //
                // HACK(msiglreith): To add the drop shadow we slightly tweak the non-client area.
                // This leads to a small black 1px border on the top. Adding a margin manually
                // on all 4 borders would result in the caption getting drawn by the DWM.
                //
                // Another option would be to allow the DWM to paint inside the client area.
                // Unfortunately this results in janky resize behavior, where the compositor is
                // ahead of the window surface. Currently, there seems no option to achieve this
                // with the Windows API.
                params.rgrc[0].top += 1;
                params.rgrc[0].bottom += 1;
            }

            result = ProcResult::Value(0);
        },

        WM_ENTERSIZEMOVE => {
            userdata
                .window_state_lock()
                .set_window_flags_in_place(|f| f.insert(WindowFlags::MARKER_IN_SIZE_MOVE));
            result = ProcResult::Value(0);
        },

        WM_EXITSIZEMOVE => {
            let mut state = userdata.window_state_lock();
            if state.dragging {
                state.dragging = false;
                unsafe { PostMessageW(window, WM_LBUTTONUP, 0, lparam) };
            }

            state.set_window_flags_in_place(|f| f.remove(WindowFlags::MARKER_IN_SIZE_MOVE));
            result = ProcResult::Value(0);
        },

        WM_NCLBUTTONDOWN => {
            if wparam == HTCAPTION as _ {
                unsafe { PostMessageW(window, WM_MOUSEMOVE, 0, lparam) };
            }
            result = ProcResult::DefWindowProc(wparam);
        },

        WM_CLOSE => {
            use crate::event::WindowEvent::CloseRequested;
            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: CloseRequested,
            });
            result = ProcResult::Value(0);
        },

        WM_DESTROY => {
            use crate::event::WindowEvent::Destroyed;
            unsafe { RevokeDragDrop(window) };
            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: Destroyed,
            });
            result = ProcResult::Value(0);
        },

        WM_NCDESTROY => {
            unsafe { super::set_window_long(window, GWL_USERDATA, 0) };
            userdata.userdata_removed.set(true);
            result = ProcResult::Value(0);
        },

        WM_PAINT => {
            userdata.window_state_lock().redraw_requested =
                userdata.event_loop_runner.should_buffer();

            // We'll buffer only in response to `UpdateWindow`, if win32 decides to redraw the
            // window outside the normal flow of the event loop. This way mark event as handled
            // and request a normal redraw with `RedrawWindow`.
            if !userdata.event_loop_runner.should_buffer() {
                userdata.send_event(Event::WindowEvent {
                    window_id: WindowId::from_raw(window as usize),
                    event: WindowEvent::RedrawRequested,
                });
            }

            // NOTE: calling `RedrawWindow` during `WM_PAINT` does nothing, since to mark
            // `WM_PAINT` as handled we should call the `DefWindowProcW`. Call it and check whether
            // user asked for redraw during `RedrawRequested` event handling and request it again
            // after marking `WM_PAINT` as handled.
            result = ProcResult::Value(unsafe { DefWindowProcW(window, msg, wparam, lparam) });
            if std::mem::take(&mut userdata.window_state_lock().redraw_requested) {
                unsafe { RedrawWindow(window, ptr::null(), 0, RDW_INTERNALPAINT) };
            }
        },
        WM_WINDOWPOSCHANGING => {
            let mut window_state = userdata.window_state_lock();
            if let Some(ref mut fullscreen) = window_state.fullscreen {
                let window_pos = unsafe { &mut *(lparam as *mut WINDOWPOS) };
                let new_rect = RECT {
                    left: window_pos.x,
                    top: window_pos.y,
                    right: window_pos.x + window_pos.cx,
                    bottom: window_pos.y + window_pos.cy,
                };

                const NOMOVE_OR_NOSIZE: u32 = SWP_NOMOVE | SWP_NOSIZE;

                let new_rect = if window_pos.flags & NOMOVE_OR_NOSIZE != 0 {
                    let cur_rect = util::WindowArea::Outer.get_rect(window).expect(
                        "Unexpected GetWindowRect failure; please report this error to \
                         rust-windowing/winit",
                    );

                    match window_pos.flags & NOMOVE_OR_NOSIZE {
                        NOMOVE_OR_NOSIZE => None,

                        SWP_NOMOVE => Some(RECT {
                            left: cur_rect.left,
                            top: cur_rect.top,
                            right: cur_rect.left + window_pos.cx,
                            bottom: cur_rect.top + window_pos.cy,
                        }),

                        SWP_NOSIZE => Some(RECT {
                            left: window_pos.x,
                            top: window_pos.y,
                            right: window_pos.x - cur_rect.left + cur_rect.right,
                            bottom: window_pos.y - cur_rect.top + cur_rect.bottom,
                        }),

                        _ => unreachable!(),
                    }
                } else {
                    Some(new_rect)
                };

                if let Some(new_rect) = new_rect {
                    let new_monitor = unsafe { MonitorFromRect(&new_rect, MONITOR_DEFAULTTONULL) };
                    match fullscreen {
                        Fullscreen::Borderless(ref mut fullscreen_monitor) => {
                            if new_monitor != 0
                                && fullscreen_monitor
                                    .as_ref()
                                    .map(|monitor| new_monitor != monitor.hmonitor())
                                    .unwrap_or(true)
                            {
                                if let Ok(new_monitor_info) = monitor::get_monitor_info(new_monitor)
                                {
                                    let new_monitor_rect = new_monitor_info.monitorInfo.rcMonitor;
                                    window_pos.x = new_monitor_rect.left;
                                    window_pos.y = new_monitor_rect.top;
                                    window_pos.cx = new_monitor_rect.right - new_monitor_rect.left;
                                    window_pos.cy = new_monitor_rect.bottom - new_monitor_rect.top;
                                }
                                *fullscreen_monitor = Some(MonitorHandle::new(new_monitor));
                            }
                        },
                        Fullscreen::Exclusive(ref video_mode) => {
                            let old_monitor = video_mode.monitor.hmonitor();
                            if let Ok(old_monitor_info) = monitor::get_monitor_info(old_monitor) {
                                let old_monitor_rect = old_monitor_info.monitorInfo.rcMonitor;
                                window_pos.x = old_monitor_rect.left;
                                window_pos.y = old_monitor_rect.top;
                                window_pos.cx = old_monitor_rect.right - old_monitor_rect.left;
                                window_pos.cy = old_monitor_rect.bottom - old_monitor_rect.top;
                            }
                        },
                    }
                }
            }

            result = ProcResult::Value(0);
        },

        // WM_MOVE supplies client area positions, so we send Moved here instead.
        WM_WINDOWPOSCHANGED => {
            use crate::event::WindowEvent::Moved;

            let windowpos = lparam as *const WINDOWPOS;
            if unsafe { (*windowpos).flags & SWP_NOMOVE != SWP_NOMOVE } {
                let physical_position =
                    unsafe { PhysicalPosition::new((*windowpos).x, (*windowpos).y) };
                userdata.send_event(Event::WindowEvent {
                    window_id: WindowId::from_raw(window as usize),
                    event: Moved(physical_position),
                });
            }

            // This is necessary for us to still get sent WM_SIZE.
            result = ProcResult::DefWindowProc(wparam);
        },

        WM_SIZE => {
            use crate::event::WindowEvent::SurfaceResized;
            let w = super::loword(lparam as u32) as u32;
            let h = super::hiword(lparam as u32) as u32;

            let physical_size = PhysicalSize::new(w, h);
            let event = Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: SurfaceResized(physical_size),
            };

            {
                let mut w = userdata.window_state_lock();
                // See WindowFlags::MARKER_RETAIN_STATE_ON_SIZE docs for info on why this `if` check
                // exists.
                if !w.window_flags().contains(WindowFlags::MARKER_RETAIN_STATE_ON_SIZE) {
                    let maximized = wparam == SIZE_MAXIMIZED as usize;
                    w.set_window_flags_in_place(|f| f.set(WindowFlags::MAXIMIZED, maximized));
                }
            }
            userdata.send_event(event);
            result = ProcResult::Value(0);
        },

        WM_SIZING => {
            /// Calculate the amount to add to round `value` to the nearest multiple of `increment`.
            fn snap_to_nearest_increment_delta(value: i32, increment: i32) -> i32 {
                let half_one = increment / 2;
                let half_two = increment - half_one;
                half_one - (value - half_two) % increment
            }

            let scale_factor = userdata.window_state_lock().scale_factor;
            let Some(inc) = userdata
                .window_state_lock()
                .surface_resize_increments
                .map(|inc| inc.to_physical(scale_factor))
                .filter(|inc| inc.width > 0 && inc.height > 0)
            else {
                result = ProcResult::Value(0);
                return;
            };

            let side = wparam as u32;
            // The desired new size of the window, decorations included.
            let rect = unsafe { &mut *(lparam as *mut RECT) };

            // We need to calculate the dimensions of the window decorations to get the true
            // size of the window's contents
            let adj_rect = userdata
                .window_state_lock()
                .window_flags
                .adjust_rect(window, *rect)
                .unwrap_or(*rect);
            let deco_width = rect.left - adj_rect.left + adj_rect.right - rect.right;
            let deco_height = rect.top - adj_rect.top + adj_rect.bottom - rect.bottom;

            let width = rect.right - rect.left - deco_width;
            let height = rect.bottom - rect.top - deco_height;

            let mut width_delta = snap_to_nearest_increment_delta(width, inc.width);
            let mut height_delta = snap_to_nearest_increment_delta(height, inc.height);

            // Windows won't bound check the value of `rect` after we're done here, so we
            // have to check manually. If the width/height we snap to would go out of bounds, just
            // set it equal to the min/max bound.
            let min_size =
                userdata.window_state_lock().min_size.map(|size| size.to_physical(scale_factor));
            let max_size =
                userdata.window_state_lock().max_size.map(|size| size.to_physical(scale_factor));
            let final_width = width + width_delta;
            let final_height = height + height_delta;
            if let Some(min_size) = min_size {
                if final_width < min_size.width {
                    width_delta += min_size.width - final_width;
                }
                if final_height < min_size.height {
                    height_delta += min_size.height - final_height;
                }
            }
            if let Some(max_size) = max_size {
                if final_width > max_size.width {
                    width_delta -= final_width - max_size.width;
                }
                if final_height > max_size.height {
                    height_delta -= final_height - max_size.height;
                }
            }

            match side {
                WMSZ_LEFT | WMSZ_BOTTOMLEFT | WMSZ_TOPLEFT => {
                    rect.left -= width_delta;
                },
                WMSZ_RIGHT | WMSZ_BOTTOMRIGHT | WMSZ_TOPRIGHT => {
                    rect.right += width_delta;
                },
                _ => {},
            }

            match side {
                WMSZ_TOP | WMSZ_TOPLEFT | WMSZ_TOPRIGHT => {
                    rect.top -= height_delta;
                },
                WMSZ_BOTTOM | WMSZ_BOTTOMLEFT | WMSZ_BOTTOMRIGHT => {
                    rect.bottom += height_delta;
                },
                _ => {},
            }

            result = ProcResult::DefWindowProc(wparam);
        },

        WM_MENUCHAR => {
            result = ProcResult::Value((MNC_CLOSE << 16) as isize);
        },

        WM_IME_STARTCOMPOSITION => {
            let ime_allowed = userdata.window_state_lock().ime_allowed;
            if ime_allowed {
                userdata.window_state_lock().ime_state = ImeState::Enabled;

                userdata.send_event(Event::WindowEvent {
                    window_id: WindowId::from_raw(window as usize),
                    event: WindowEvent::Ime(Ime::Enabled),
                });
            }

            result = ProcResult::DefWindowProc(wparam);
        },

        WM_IME_COMPOSITION => {
            let ime_allowed_and_composing = {
                let w = userdata.window_state_lock();
                w.ime_allowed && w.ime_state != ImeState::Disabled
            };
            // Windows Hangul IME sends WM_IME_COMPOSITION after WM_IME_ENDCOMPOSITION, so
            // check whether composing.
            if ime_allowed_and_composing {
                let ime_context = unsafe { ImeContext::current(window) };

                if lparam == 0 {
                    userdata.send_event(Event::WindowEvent {
                        window_id: WindowId::from_raw(window as usize),
                        event: WindowEvent::Ime(Ime::Preedit(String::new(), None)),
                    });
                }

                // Google Japanese Input and ATOK have both flags, so
                // first, receive composing result if exist.
                if (lparam as u32 & GCS_RESULTSTR) != 0 {
                    if let Some(text) = unsafe { ime_context.get_composed_text() } {
                        userdata.window_state_lock().ime_state = ImeState::Enabled;

                        userdata.send_event(Event::WindowEvent {
                            window_id: WindowId::from_raw(window as usize),
                            event: WindowEvent::Ime(Ime::Preedit(String::new(), None)),
                        });
                        userdata.send_event(Event::WindowEvent {
                            window_id: WindowId::from_raw(window as usize),
                            event: WindowEvent::Ime(Ime::Commit(text)),
                        });
                    }
                }

                // Next, receive preedit range for next composing if exist.
                if (lparam as u32 & GCS_COMPSTR) != 0 {
                    if let Some((text, first, last)) =
                        unsafe { ime_context.get_composing_text_and_cursor() }
                    {
                        userdata.window_state_lock().ime_state = ImeState::Preedit;
                        let cursor_range = first.map(|f| (f, last.unwrap_or(f)));

                        userdata.send_event(Event::WindowEvent {
                            window_id: WindowId::from_raw(window as usize),
                            event: WindowEvent::Ime(Ime::Preedit(text, cursor_range)),
                        });
                    }
                }
            }

            // Not calling DefWindowProc to hide composing text drawn by IME.
            result = ProcResult::Value(0);
        },

        WM_IME_ENDCOMPOSITION => {
            let ime_allowed_or_composing = {
                let w = userdata.window_state_lock();
                w.ime_allowed || w.ime_state != ImeState::Disabled
            };
            if ime_allowed_or_composing {
                if userdata.window_state_lock().ime_state == ImeState::Preedit {
                    // Windows Hangul IME sends WM_IME_COMPOSITION after WM_IME_ENDCOMPOSITION, so
                    // trying receiving composing result and commit if exists.
                    let ime_context = unsafe { ImeContext::current(window) };
                    if let Some(text) = unsafe { ime_context.get_composed_text() } {
                        userdata.send_event(Event::WindowEvent {
                            window_id: WindowId::from_raw(window as usize),
                            event: WindowEvent::Ime(Ime::Preedit(String::new(), None)),
                        });
                        userdata.send_event(Event::WindowEvent {
                            window_id: WindowId::from_raw(window as usize),
                            event: WindowEvent::Ime(Ime::Commit(text)),
                        });
                    }
                }

                userdata.window_state_lock().ime_state = ImeState::Disabled;

                userdata.send_event(Event::WindowEvent {
                    window_id: WindowId::from_raw(window as usize),
                    event: WindowEvent::Ime(Ime::Disabled),
                });
            }

            result = ProcResult::DefWindowProc(wparam);
        },

        WM_IME_SETCONTEXT => {
            // Hide composing text drawn by IME.
            let wparam = wparam & (!ISC_SHOWUICOMPOSITIONWINDOW as usize);
            result = ProcResult::DefWindowProc(wparam);
        },

        // this is necessary for us to maintain minimize/restore state
        WM_SYSCOMMAND => {
            if wparam == SC_RESTORE as usize {
                let mut w = userdata.window_state_lock();
                w.set_window_flags_in_place(|f| f.set(WindowFlags::MINIMIZED, false));
            }
            if wparam == SC_MINIMIZE as usize {
                let mut w = userdata.window_state_lock();
                w.set_window_flags_in_place(|f| f.set(WindowFlags::MINIMIZED, true));
            }
            // Send `WindowEvent::Minimized` here if we decide to implement one

            if wparam == SC_SCREENSAVE as usize {
                let window_state = userdata.window_state_lock();
                if window_state.fullscreen.is_some() {
                    result = ProcResult::Value(0);
                    return;
                }
            }

            result = ProcResult::DefWindowProc(wparam);
        },

        WM_MOUSEMOVE => {
            use crate::event::WindowEvent::{PointerEntered, PointerLeft, PointerMoved};
            use crate::event::{PointerKind, PointerSource};

            let x = super::get_x_lparam(lparam as u32) as i32;
            let y = super::get_y_lparam(lparam as u32) as i32;
            let position = PhysicalPosition::new(x as f64, y as f64);

            let cursor_moved;
            {
                let mut w = userdata.window_state_lock();
                let mouse_was_inside_window =
                    w.mouse.cursor_flags().contains(CursorFlags::IN_WINDOW);

                match get_pointer_move_kind(window, mouse_was_inside_window, x, y) {
                    PointerMoveKind::Enter => {
                        w.mouse
                            .set_cursor_flags(window, |f| f.set(CursorFlags::IN_WINDOW, true))
                            .ok();

                        drop(w);
                        userdata.send_event(Event::WindowEvent {
                            window_id: WindowId::from_raw(window as usize),
                            event: PointerEntered {
                                device_id: None,
                                position,
                                kind: PointerKind::Mouse,
                            },
                        });

                        // Calling TrackMouseEvent in order to receive mouse leave events.
                        unsafe {
                            TrackMouseEvent(&mut TRACKMOUSEEVENT {
                                cbSize: mem::size_of::<TRACKMOUSEEVENT>() as u32,
                                dwFlags: TME_LEAVE,
                                hwndTrack: window,
                                dwHoverTime: HOVER_DEFAULT,
                            })
                        };
                    },
                    PointerMoveKind::Leave => {
                        w.mouse
                            .set_cursor_flags(window, |f| f.set(CursorFlags::IN_WINDOW, false))
                            .ok();

                        drop(w);
                        userdata.send_event(Event::WindowEvent {
                            window_id: WindowId::from_raw(window as usize),
                            event: PointerLeft {
                                device_id: None,
                                position: Some(position),
                                kind: PointerKind::Mouse,
                            },
                        });
                    },
                    PointerMoveKind::None => drop(w),
                }

                // handle spurious WM_MOUSEMOVE messages
                // see https://devblogs.microsoft.com/oldnewthing/20031001-00/?p=42343
                // and http://debugandconquer.blogspot.com/2015/08/the-cause-of-spurious-mouse-move.html
                let mut w = userdata.window_state_lock();
                cursor_moved = w.mouse.last_position != Some(position);
                w.mouse.last_position = Some(position);
            }

            if cursor_moved {
                update_modifiers(window, userdata);

                userdata.send_event(Event::WindowEvent {
                    window_id: WindowId::from_raw(window as usize),
                    event: PointerMoved { device_id: None, position, source: PointerSource::Mouse },
                });
            }

            result = ProcResult::Value(0);
        },

        WM_MOUSELEAVE => {
            use crate::event::PointerKind::Mouse;
            use crate::event::WindowEvent::PointerLeft;

            {
                let mut w = userdata.window_state_lock();
                w.mouse.set_cursor_flags(window, |f| f.set(CursorFlags::IN_WINDOW, false)).ok();
            }

            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: PointerLeft { device_id: None, position: None, kind: Mouse },
            });

            result = ProcResult::Value(0);
        },

        WM_MOUSEWHEEL => {
            use crate::event::MouseScrollDelta::LineDelta;

            let value = (wparam >> 16) as i16;
            let value = value as f32 / WHEEL_DELTA as f32;

            update_modifiers(window, userdata);

            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: WindowEvent::MouseWheel {
                    device_id: None,
                    delta: LineDelta(0.0, value),
                    phase: TouchPhase::Moved,
                },
            });

            result = ProcResult::Value(0);
        },

        WM_MOUSEHWHEEL => {
            use crate::event::MouseScrollDelta::LineDelta;

            let value = (wparam >> 16) as i16;
            let value = -value as f32 / WHEEL_DELTA as f32; // NOTE: inverted! See https://github.com/rust-windowing/winit/pull/2105/

            update_modifiers(window, userdata);

            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: WindowEvent::MouseWheel {
                    device_id: None,
                    delta: LineDelta(value, 0.0),
                    phase: TouchPhase::Moved,
                },
            });

            result = ProcResult::Value(0);
        },

        WM_KEYDOWN | WM_SYSKEYDOWN => {
            if msg == WM_SYSKEYDOWN {
                result = ProcResult::DefWindowProc(wparam);
            }
        },

        WM_KEYUP | WM_SYSKEYUP => {
            if msg == WM_SYSKEYUP && unsafe { GetMenu(window) != 0 } {
                // let Windows handle event if the window has a native menu, a modal event loop
                // is started here on Alt key up.
                result = ProcResult::DefWindowProc(wparam);
            }
        },

        WM_LBUTTONDOWN => {
            use crate::event::ElementState::Pressed;
            use crate::event::MouseButton::Left;
            use crate::event::WindowEvent::PointerButton;

            unsafe { capture_mouse(window, &mut userdata.window_state_lock()) };

            update_modifiers(window, userdata);

            let x = super::get_x_lparam(lparam as u32) as i32;
            let y = super::get_y_lparam(lparam as u32) as i32;
            let position = PhysicalPosition::new(x as f64, y as f64);

            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: PointerButton {
                    device_id: None,
                    state: Pressed,
                    position,
                    button: Left.into(),
                },
            });
            result = ProcResult::Value(0);
        },

        WM_LBUTTONUP => {
            use crate::event::ElementState::Released;
            use crate::event::MouseButton::Left;
            use crate::event::WindowEvent::PointerButton;

            unsafe { release_mouse(userdata.window_state_lock()) };

            update_modifiers(window, userdata);

            let x = super::get_x_lparam(lparam as u32) as i32;
            let y = super::get_y_lparam(lparam as u32) as i32;
            let position = PhysicalPosition::new(x as f64, y as f64);

            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: PointerButton {
                    device_id: None,
                    state: Released,
                    position,
                    button: Left.into(),
                },
            });
            result = ProcResult::Value(0);
        },

        WM_RBUTTONDOWN => {
            use crate::event::ElementState::Pressed;
            use crate::event::MouseButton::Right;
            use crate::event::WindowEvent::PointerButton;

            unsafe { capture_mouse(window, &mut userdata.window_state_lock()) };

            update_modifiers(window, userdata);

            let x = super::get_x_lparam(lparam as u32) as i32;
            let y = super::get_y_lparam(lparam as u32) as i32;
            let position = PhysicalPosition::new(x as f64, y as f64);

            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: PointerButton {
                    device_id: None,
                    state: Pressed,
                    position,
                    button: Right.into(),
                },
            });
            result = ProcResult::Value(0);
        },

        WM_RBUTTONUP => {
            use crate::event::ElementState::Released;
            use crate::event::MouseButton::Right;
            use crate::event::WindowEvent::PointerButton;

            unsafe { release_mouse(userdata.window_state_lock()) };

            update_modifiers(window, userdata);

            let x = super::get_x_lparam(lparam as u32) as i32;
            let y = super::get_y_lparam(lparam as u32) as i32;
            let position = PhysicalPosition::new(x as f64, y as f64);

            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: PointerButton {
                    device_id: None,
                    state: Released,
                    position,
                    button: Right.into(),
                },
            });
            result = ProcResult::Value(0);
        },

        WM_MBUTTONDOWN => {
            use crate::event::ElementState::Pressed;
            use crate::event::MouseButton::Middle;
            use crate::event::WindowEvent::PointerButton;

            unsafe { capture_mouse(window, &mut userdata.window_state_lock()) };

            update_modifiers(window, userdata);

            let x = super::get_x_lparam(lparam as u32) as i32;
            let y = super::get_y_lparam(lparam as u32) as i32;
            let position = PhysicalPosition::new(x as f64, y as f64);

            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: PointerButton {
                    device_id: None,
                    state: Pressed,
                    position,
                    button: Middle.into(),
                },
            });
            result = ProcResult::Value(0);
        },

        WM_MBUTTONUP => {
            use crate::event::ElementState::Released;
            use crate::event::MouseButton::Middle;
            use crate::event::WindowEvent::PointerButton;

            unsafe { release_mouse(userdata.window_state_lock()) };

            update_modifiers(window, userdata);

            let x = super::get_x_lparam(lparam as u32) as i32;
            let y = super::get_y_lparam(lparam as u32) as i32;
            let position = PhysicalPosition::new(x as f64, y as f64);

            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: PointerButton {
                    device_id: None,
                    state: Released,
                    position,
                    button: Middle.into(),
                },
            });
            result = ProcResult::Value(0);
        },

        WM_XBUTTONDOWN => {
            use crate::event::ElementState::Pressed;
            use crate::event::MouseButton::{Back, Forward, Other};
            use crate::event::WindowEvent::PointerButton;
            let xbutton = super::get_xbutton_wparam(wparam as u32);

            unsafe { capture_mouse(window, &mut userdata.window_state_lock()) };

            update_modifiers(window, userdata);

            let x = super::get_x_lparam(lparam as u32) as i32;
            let y = super::get_y_lparam(lparam as u32) as i32;
            let position = PhysicalPosition::new(x as f64, y as f64);

            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: PointerButton {
                    device_id: None,
                    state: Pressed,
                    position,
                    button: match xbutton {
                        1 => Back,
                        2 => Forward,
                        _ => Other(xbutton),
                    }
                    .into(),
                },
            });
            result = ProcResult::Value(0);
        },

        WM_XBUTTONUP => {
            use crate::event::ElementState::Released;
            use crate::event::MouseButton::{Back, Forward, Other};
            use crate::event::WindowEvent::PointerButton;
            let xbutton = super::get_xbutton_wparam(wparam as u32);

            unsafe { release_mouse(userdata.window_state_lock()) };

            update_modifiers(window, userdata);

            let x = super::get_x_lparam(lparam as u32) as i32;
            let y = super::get_y_lparam(lparam as u32) as i32;
            let position = PhysicalPosition::new(x as f64, y as f64);

            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: PointerButton {
                    device_id: None,
                    state: Released,
                    position,
                    button: match xbutton {
                        1 => Back,
                        2 => Forward,
                        _ => Other(xbutton),
                    }
                    .into(),
                },
            });
            result = ProcResult::Value(0);
        },

        WM_CAPTURECHANGED => {
            // lparam here is a handle to the window which is gaining mouse capture.
            // If it is the same as our window, then we're essentially retaining the capture. This
            // can happen if `SetCapture` is called on our window when it already has the mouse
            // capture.
            if lparam != window {
                userdata.window_state_lock().mouse.capture_count = 0;
            }
            result = ProcResult::Value(0);
        },

        WM_TOUCH => {
            use crate::event::ButtonSource::Touch;
            use crate::event::ElementState::{Pressed, Released};
            use crate::event::{PointerKind, PointerSource};

            let pcount = super::loword(wparam as u32) as usize;
            let mut inputs = Vec::with_capacity(pcount);
            let htouch = lparam;
            if unsafe {
                GetTouchInputInfo(
                    htouch,
                    pcount as u32,
                    inputs.as_mut_ptr(),
                    mem::size_of::<TOUCHINPUT>() as i32,
                ) > 0
            } {
                unsafe { inputs.set_len(pcount) };
                for input in &inputs {
                    let mut position = POINT { x: input.x / 100, y: input.y / 100 };

                    if unsafe { ScreenToClient(window, &mut position) } == false.into() {
                        continue;
                    }

                    let x = position.x as f64 + (input.x % 100) as f64 / 100f64;
                    let y = position.y as f64 + (input.y % 100) as f64 / 100f64;
                    let position = PhysicalPosition::new(x, y);

                    let window_id = WindowId::from_raw(window as usize);
                    let finger_id = RootFingerId(FingerId {
                        id: input.dwID,
                        primary: util::has_flag(input.dwFlags, TOUCHEVENTF_PRIMARY),
                    });

                    if util::has_flag(input.dwFlags, TOUCHEVENTF_DOWN) {
                        userdata.send_event(Event::WindowEvent {
                            window_id,
                            event: WindowEvent::PointerEntered {
                                device_id: None,
                                position,
                                kind: PointerKind::Touch(finger_id),
                            },
                        });
                        userdata.send_event(Event::WindowEvent {
                            window_id,
                            event: WindowEvent::PointerButton {
                                device_id: None,
                                state: Pressed,
                                position,
                                button: Touch { finger_id, force: None },
                            },
                        });
                    } else if util::has_flag(input.dwFlags, TOUCHEVENTF_UP) {
                        userdata.send_event(Event::WindowEvent {
                            window_id,
                            event: WindowEvent::PointerButton {
                                device_id: None,
                                state: Released,
                                position,
                                button: Touch { finger_id, force: None },
                            },
                        });
                        userdata.send_event(Event::WindowEvent {
                            window_id,
                            event: WindowEvent::PointerLeft {
                                device_id: None,
                                position: Some(position),
                                kind: PointerKind::Touch(finger_id),
                            },
                        });
                    } else if util::has_flag(input.dwFlags, TOUCHEVENTF_MOVE) {
                        userdata.send_event(Event::WindowEvent {
                            window_id,
                            event: WindowEvent::PointerMoved {
                                device_id: None,
                                position,
                                source: PointerSource::Touch { finger_id, force: None },
                            },
                        });
                    } else {
                        continue;
                    }
                }
            }
            unsafe { CloseTouchInputHandle(htouch) };
            result = ProcResult::Value(0);
        },

        WM_POINTERDOWN | WM_POINTERUPDATE | WM_POINTERUP => {
            use crate::event::ElementState::{Pressed, Released};
            use crate::event::{ButtonSource, PointerKind, PointerSource};

            if let (
                Some(GetPointerFrameInfoHistory),
                Some(SkipPointerFrameMessages),
                Some(GetPointerDeviceRects),
            ) = (
                *util::GET_POINTER_FRAME_INFO_HISTORY,
                *util::SKIP_POINTER_FRAME_MESSAGES,
                *util::GET_POINTER_DEVICE_RECTS,
            ) {
                let pointer_id = super::loword(wparam as u32) as u32;
                let mut entries_count = 0u32;
                let mut pointers_count = 0u32;
                if unsafe {
                    GetPointerFrameInfoHistory(
                        pointer_id,
                        &mut entries_count,
                        &mut pointers_count,
                        ptr::null_mut(),
                    )
                } == false.into()
                {
                    result = ProcResult::Value(0);
                    return;
                }

                let pointer_info_count = (entries_count * pointers_count) as usize;
                let mut pointer_infos = Vec::with_capacity(pointer_info_count);
                if unsafe {
                    GetPointerFrameInfoHistory(
                        pointer_id,
                        &mut entries_count,
                        &mut pointers_count,
                        pointer_infos.as_mut_ptr(),
                    )
                } == false.into()
                {
                    result = ProcResult::Value(0);
                    return;
                }
                unsafe { pointer_infos.set_len(pointer_info_count) };

                // https://docs.microsoft.com/en-us/windows/desktop/api/winuser/nf-winuser-getpointerframeinfohistory
                // The information retrieved appears in reverse chronological order, with the most
                // recent entry in the first row of the returned array
                for pointer_info in pointer_infos.iter().rev() {
                    let mut device_rect = mem::MaybeUninit::uninit();
                    let mut display_rect = mem::MaybeUninit::uninit();

                    if unsafe {
                        GetPointerDeviceRects(
                            pointer_info.sourceDevice,
                            device_rect.as_mut_ptr(),
                            display_rect.as_mut_ptr(),
                        )
                    } == false.into()
                    {
                        continue;
                    }

                    let device_rect = unsafe { device_rect.assume_init() };
                    let display_rect = unsafe { display_rect.assume_init() };

                    // For the most precise himetric to pixel conversion we calculate the ratio
                    // between the resolution of the display device (pixel) and
                    // the touch device (himetric).
                    let himetric_to_pixel_ratio_x = (display_rect.right - display_rect.left) as f64
                        / (device_rect.right - device_rect.left) as f64;
                    let himetric_to_pixel_ratio_y = (display_rect.bottom - display_rect.top) as f64
                        / (device_rect.bottom - device_rect.top) as f64;

                    // ptHimetricLocation's origin is 0,0 even on multi-monitor setups.
                    // On multi-monitor setups we need to translate the himetric location to the
                    // rect of the display device it's attached to.
                    let x = display_rect.left as f64
                        + pointer_info.ptHimetricLocation.x as f64 * himetric_to_pixel_ratio_x;
                    let y = display_rect.top as f64
                        + pointer_info.ptHimetricLocation.y as f64 * himetric_to_pixel_ratio_y;

                    let mut location = POINT { x: x.floor() as i32, y: y.floor() as i32 };

                    if unsafe { ScreenToClient(window, &mut location) } == false.into() {
                        continue;
                    }

                    let force = if let PT_TOUCH = pointer_info.pointerType {
                        let mut touch_info = mem::MaybeUninit::uninit();
                        util::GET_POINTER_TOUCH_INFO.and_then(|GetPointerTouchInfo| {
                            match unsafe {
                                GetPointerTouchInfo(pointer_info.pointerId, touch_info.as_mut_ptr())
                            } {
                                0 => None,
                                _ => normalize_pointer_pressure(unsafe {
                                    touch_info.assume_init().pressure
                                }),
                            }
                        })
                    } else {
                        None
                    };

                    let x = location.x as f64 + x.fract();
                    let y = location.y as f64 + y.fract();
                    let position = PhysicalPosition::new(x, y);

                    let window_id = WindowId::from_raw(window as usize);
                    let finger_id = RootFingerId(FingerId {
                        id: pointer_info.pointerId,
                        primary: util::has_flag(pointer_info.pointerFlags, POINTER_FLAG_PRIMARY),
                    });

                    if util::has_flag(pointer_info.pointerFlags, POINTER_FLAG_DOWN) {
                        userdata.send_event(Event::WindowEvent {
                            window_id,
                            event: WindowEvent::PointerEntered {
                                device_id: None,
                                position,
                                kind: if let PT_TOUCH = pointer_info.pointerType {
                                    PointerKind::Touch(finger_id)
                                } else {
                                    PointerKind::Unknown
                                },
                            },
                        });
                        userdata.send_event(Event::WindowEvent {
                            window_id,
                            event: WindowEvent::PointerButton {
                                device_id: None,
                                state: Pressed,
                                position,
                                button: if let PT_TOUCH = pointer_info.pointerType {
                                    ButtonSource::Touch { finger_id, force }
                                } else {
                                    ButtonSource::Unknown(0)
                                },
                            },
                        });
                    } else if util::has_flag(pointer_info.pointerFlags, POINTER_FLAG_UP) {
                        userdata.send_event(Event::WindowEvent {
                            window_id,
                            event: WindowEvent::PointerButton {
                                device_id: None,
                                state: Released,
                                position,
                                button: if let PT_TOUCH = pointer_info.pointerType {
                                    ButtonSource::Touch { finger_id, force }
                                } else {
                                    ButtonSource::Unknown(0)
                                },
                            },
                        });
                        userdata.send_event(Event::WindowEvent {
                            window_id,
                            event: WindowEvent::PointerLeft {
                                device_id: None,
                                position: Some(position),
                                kind: if let PT_TOUCH = pointer_info.pointerType {
                                    PointerKind::Touch(finger_id)
                                } else {
                                    PointerKind::Unknown
                                },
                            },
                        });
                    } else if util::has_flag(pointer_info.pointerFlags, POINTER_FLAG_UPDATE) {
                        userdata.send_event(Event::WindowEvent {
                            window_id,
                            event: WindowEvent::PointerMoved {
                                device_id: None,
                                position,
                                source: if let PT_TOUCH = pointer_info.pointerType {
                                    PointerSource::Touch { finger_id, force }
                                } else {
                                    PointerSource::Unknown
                                },
                            },
                        });
                    } else {
                        continue;
                    }
                }

                unsafe { SkipPointerFrameMessages(pointer_id) };
            }
            result = ProcResult::Value(0);
        },

        WM_NCACTIVATE => {
            let is_active = wparam != false.into();
            let active_focus_changed = userdata.window_state_lock().set_active(is_active);
            if active_focus_changed {
                if is_active {
                    unsafe { gain_active_focus(window, userdata) };
                } else {
                    unsafe { lose_active_focus(window, userdata) };
                }
            }
            result = ProcResult::DefWindowProc(wparam);
        },

        WM_SETFOCUS => {
            let active_focus_changed = userdata.window_state_lock().set_focused(true);
            if active_focus_changed {
                unsafe { gain_active_focus(window, userdata) };
            }
            result = ProcResult::Value(0);
        },

        WM_KILLFOCUS => {
            let active_focus_changed = userdata.window_state_lock().set_focused(false);
            if active_focus_changed {
                unsafe { lose_active_focus(window, userdata) };
            }
            result = ProcResult::Value(0);
        },

        WM_SETCURSOR => {
            let set_cursor_to = {
                let window_state = userdata.window_state_lock();
                // The return value for the preceding `WM_NCHITTEST` message is conveniently
                // provided through the low-order word of lParam. We use that here since
                // `WM_MOUSEMOVE` seems to come after `WM_SETCURSOR` for a given cursor movement.
                let in_client_area = super::loword(lparam as u32) as u32 == HTCLIENT;
                if in_client_area {
                    Some(window_state.mouse.selected_cursor.clone())
                } else {
                    None
                }
            };

            match set_cursor_to {
                Some(selected_cursor) => {
                    let hcursor = match selected_cursor {
                        SelectedCursor::Named(cursor_icon) => unsafe {
                            LoadCursorW(0, util::to_windows_cursor(cursor_icon))
                        },
                        SelectedCursor::Custom(cursor) => cursor.as_raw_handle(),
                    };
                    unsafe { SetCursor(hcursor) };
                    result = ProcResult::Value(0);
                },
                None => result = ProcResult::DefWindowProc(wparam),
            }
        },

        WM_GETMINMAXINFO => {
            let mmi = lparam as *mut MINMAXINFO;

            let window_state = userdata.window_state_lock();
            let window_flags = window_state.window_flags;

            if window_state.min_size.is_some() || window_state.max_size.is_some() {
                if let Some(min_size) = window_state.min_size {
                    let min_size = min_size.to_physical(window_state.scale_factor);
                    let (width, height): (u32, u32) =
                        window_flags.adjust_size(window, min_size).into();
                    unsafe { (*mmi).ptMinTrackSize = POINT { x: width as i32, y: height as i32 } };
                }
                if let Some(max_size) = window_state.max_size {
                    let max_size = max_size.to_physical(window_state.scale_factor);
                    let (width, height): (u32, u32) =
                        window_flags.adjust_size(window, max_size).into();
                    unsafe { (*mmi).ptMaxTrackSize = POINT { x: width as i32, y: height as i32 } };
                }
            }

            result = ProcResult::Value(0);
        },

        // Only sent on Windows 8.1 or newer. On Windows 7 and older user has to log out to change
        // DPI, therefore all applications are closed while DPI is changing.
        WM_DPICHANGED => {
            use crate::event::WindowEvent::ScaleFactorChanged;

            // This message actually provides two DPI values - x and y. However MSDN says that
            // "you only need to use either the X-axis or the Y-axis value when scaling your
            // application since they are the same".
            // https://msdn.microsoft.com/en-us/library/windows/desktop/dn312083(v=vs.85).aspx
            let new_dpi_x = super::loword(wparam as u32) as u32;
            let new_scale_factor = dpi_to_scale_factor(new_dpi_x);
            let old_scale_factor: f64;

            let (allow_resize, window_flags) = {
                let mut window_state = userdata.window_state_lock();
                old_scale_factor = window_state.scale_factor;
                window_state.scale_factor = new_scale_factor;

                if new_scale_factor == old_scale_factor {
                    result = ProcResult::Value(0);
                    return;
                }

                let allow_resize = window_state.fullscreen.is_none()
                    && !window_state.window_flags().contains(WindowFlags::MAXIMIZED);

                (allow_resize, window_state.window_flags)
            };

            // New size as suggested by Windows.
            let suggested_rect = unsafe { *(lparam as *const RECT) };

            // The window rect provided is the window's outer size, not it's surface size. However,
            // win32 doesn't provide an `UnadjustWindowRectEx` function to get the client rect from
            // the outer rect, so we instead adjust the window rect to get the decoration margins
            // and remove them from the outer size.
            let margin_left: i32;
            let margin_top: i32;
            // let margin_right: i32;
            // let margin_bottom: i32;
            {
                let adjusted_rect =
                    window_flags.adjust_rect(window, suggested_rect).unwrap_or(suggested_rect);
                margin_left = suggested_rect.left - adjusted_rect.left;
                margin_top = suggested_rect.top - adjusted_rect.top;
                // margin_right = adjusted_rect.right - suggested_rect.right;
                // margin_bottom = adjusted_rect.bottom - suggested_rect.bottom;
            }

            let old_physical_inner_rect = util::WindowArea::Inner
                .get_rect(window)
                .expect("failed to query (old) inner window area");
            let old_physical_surface_size = PhysicalSize::new(
                (old_physical_inner_rect.right - old_physical_inner_rect.left) as u32,
                (old_physical_inner_rect.bottom - old_physical_inner_rect.top) as u32,
            );

            // `allow_resize` prevents us from re-applying DPI adjustment to the restored size after
            // exiting fullscreen (the restored size is already DPI adjusted).
            let new_physical_surface_size = match allow_resize {
                // We calculate our own size because the default suggested rect doesn't do a great
                // job of preserving the window's logical size.
                true => old_physical_surface_size
                    .to_logical::<f64>(old_scale_factor)
                    .to_physical::<u32>(new_scale_factor),
                false => old_physical_surface_size,
            };

            let new_surface_size = Arc::new(Mutex::new(new_physical_surface_size));
            userdata.send_event(Event::WindowEvent {
                window_id: WindowId::from_raw(window as usize),
                event: ScaleFactorChanged {
                    scale_factor: new_scale_factor,
                    surface_size_writer: SurfaceSizeWriter::new(Arc::downgrade(&new_surface_size)),
                },
            });

            let new_physical_surface_size = *new_surface_size.lock().unwrap();
            drop(new_surface_size);

            let dragging_window: bool;

            {
                let window_state = userdata.window_state_lock();
                dragging_window =
                    window_state.window_flags().contains(WindowFlags::MARKER_IN_SIZE_MOVE);
                // Unset maximized if we're changing the window's size.
                if new_physical_surface_size != old_physical_surface_size {
                    WindowState::set_window_flags(window_state, window, |f| {
                        f.set(WindowFlags::MAXIMIZED, false)
                    });
                }
            }

            let new_outer_rect: RECT;
            {
                let suggested_ul =
                    (suggested_rect.left + margin_left, suggested_rect.top + margin_top);

                let mut conservative_rect = RECT {
                    left: suggested_ul.0,
                    top: suggested_ul.1,
                    right: suggested_ul.0 + new_physical_surface_size.width as i32,
                    bottom: suggested_ul.1 + new_physical_surface_size.height as i32,
                };

                conservative_rect = window_flags
                    .adjust_rect(window, conservative_rect)
                    .unwrap_or(conservative_rect);

                // If we're dragging the window, offset the window so that the cursor's
                // relative horizontal position in the title bar is preserved.
                if dragging_window {
                    let bias = {
                        let cursor_pos = {
                            let mut pos = unsafe { mem::zeroed() };
                            unsafe { GetCursorPos(&mut pos) };
                            pos
                        };
                        let suggested_cursor_horizontal_ratio = (cursor_pos.x - suggested_rect.left)
                            as f64
                            / (suggested_rect.right - suggested_rect.left) as f64;

                        (cursor_pos.x
                            - (suggested_cursor_horizontal_ratio
                                * (conservative_rect.right - conservative_rect.left) as f64)
                                as i32)
                            - conservative_rect.left
                    };
                    conservative_rect.left += bias;
                    conservative_rect.right += bias;
                }

                // Check to see if the new window rect is on the monitor with the new DPI factor.
                // If it isn't, offset the window so that it is.
                let new_dpi_monitor = unsafe { MonitorFromWindow(window, MONITOR_DEFAULTTONULL) };
                let conservative_rect_monitor =
                    unsafe { MonitorFromRect(&conservative_rect, MONITOR_DEFAULTTONULL) };
                new_outer_rect = if conservative_rect_monitor == new_dpi_monitor {
                    conservative_rect
                } else {
                    let get_monitor_rect = |monitor| {
                        let mut monitor_info = MONITORINFO {
                            cbSize: mem::size_of::<MONITORINFO>() as _,
                            ..unsafe { mem::zeroed() }
                        };
                        unsafe { GetMonitorInfoW(monitor, &mut monitor_info) };
                        monitor_info.rcMonitor
                    };
                    let wrong_monitor = conservative_rect_monitor;
                    let wrong_monitor_rect = get_monitor_rect(wrong_monitor);
                    let new_monitor_rect = get_monitor_rect(new_dpi_monitor);

                    // The direction to nudge the window in to get the window onto the monitor with
                    // the new DPI factor. We calculate this by seeing which monitor edges are
                    // shared and nudging away from the wrong monitor based on those.
                    #[allow(clippy::bool_to_int_with_if)]
                    let delta_nudge_to_dpi_monitor = (
                        if wrong_monitor_rect.left == new_monitor_rect.right {
                            -1
                        } else if wrong_monitor_rect.right == new_monitor_rect.left {
                            1
                        } else {
                            0
                        },
                        if wrong_monitor_rect.bottom == new_monitor_rect.top {
                            1
                        } else if wrong_monitor_rect.top == new_monitor_rect.bottom {
                            -1
                        } else {
                            0
                        },
                    );

                    let abort_after_iterations = new_monitor_rect.right - new_monitor_rect.left
                        + new_monitor_rect.bottom
                        - new_monitor_rect.top;
                    for _ in 0..abort_after_iterations {
                        conservative_rect.left += delta_nudge_to_dpi_monitor.0;
                        conservative_rect.right += delta_nudge_to_dpi_monitor.0;
                        conservative_rect.top += delta_nudge_to_dpi_monitor.1;
                        conservative_rect.bottom += delta_nudge_to_dpi_monitor.1;

                        if unsafe { MonitorFromRect(&conservative_rect, MONITOR_DEFAULTTONULL) }
                            == new_dpi_monitor
                        {
                            break;
                        }
                    }

                    conservative_rect
                };
            }

            unsafe {
                SetWindowPos(
                    window,
                    0,
                    new_outer_rect.left,
                    new_outer_rect.top,
                    new_outer_rect.right - new_outer_rect.left,
                    new_outer_rect.bottom - new_outer_rect.top,
                    SWP_NOZORDER | SWP_NOACTIVATE,
                )
            };

            result = ProcResult::Value(0);
        },

        WM_SETTINGCHANGE => {
            use crate::event::WindowEvent::ThemeChanged;

            let preferred_theme = userdata.window_state_lock().preferred_theme;

            if preferred_theme.is_none() {
                let new_theme = try_theme(window, preferred_theme);
                let mut window_state = userdata.window_state_lock();

                if window_state.current_theme != new_theme {
                    window_state.current_theme = new_theme;
                    drop(window_state);
                    userdata.send_event(Event::WindowEvent {
                        window_id: WindowId::from_raw(window as usize),
                        event: ThemeChanged(new_theme),
                    });
                }
            }
            result = ProcResult::DefWindowProc(wparam);
        },

        _ => {
            if msg == DESTROY_MSG_ID.get() {
                unsafe { DestroyWindow(window) };
                result = ProcResult::Value(0);
            } else if msg == SET_RETAIN_STATE_ON_SIZE_MSG_ID.get() {
                let mut window_state = userdata.window_state_lock();
                window_state.set_window_flags_in_place(|f| {
                    f.set(WindowFlags::MARKER_RETAIN_STATE_ON_SIZE, wparam != 0)
                });
                result = ProcResult::Value(0);
            } else if msg == TASKBAR_CREATED.get() {
                let window_state = userdata.window_state_lock();
                unsafe { set_skip_taskbar(window, window_state.skip_taskbar) };
                result = ProcResult::DefWindowProc(wparam);
            } else {
                result = ProcResult::DefWindowProc(wparam);
            }
        },
    };

    userdata
        .event_loop_runner
        .catch_unwind(callback)
        .unwrap_or_else(|| result = ProcResult::Value(-1));

    match result {
        ProcResult::DefWindowProc(wparam) => unsafe { DefWindowProcW(window, msg, wparam, lparam) },
        ProcResult::Value(val) => val,
    }
}

unsafe extern "system" fn thread_event_target_callback(
    window: HWND,
    msg: u32,
    wparam: WPARAM,
    lparam: LPARAM,
) -> LRESULT {
    let userdata_ptr =
        unsafe { super::get_window_long(window, GWL_USERDATA) } as *mut ThreadMsgTargetData;
    if userdata_ptr.is_null() {
        // `userdata_ptr` will always be null for the first `WM_GETMINMAXINFO`, as well as
        // `WM_NCCREATE` and `WM_CREATE`.
        return unsafe { DefWindowProcW(window, msg, wparam, lparam) };
    }
    let userdata = unsafe { Box::from_raw(userdata_ptr) };

    if msg != WM_PAINT {
        unsafe { RedrawWindow(window, ptr::null(), 0, RDW_INTERNALPAINT) };
    }

    let mut userdata_removed = false;

    // I decided to bind the closure to `callback` and pass it to catch_unwind rather than passing
    // the closure to catch_unwind directly so that the match body indentation wouldn't change and
    // the git blame and history would be preserved.
    let callback = || match msg {
        WM_NCDESTROY => {
            unsafe { super::set_window_long(window, GWL_USERDATA, 0) };
            userdata_removed = true;
            0
        },
        WM_PAINT => unsafe {
            ValidateRect(window, ptr::null());
            // Default WM_PAINT behaviour. This makes sure modals and popups are shown immediately
            // when opening them.
            DefWindowProcW(window, msg, wparam, lparam)
        },
        WM_INPUT => {
            if let Some(data) = raw_input::get_raw_input_data(lparam as _) {
                unsafe { handle_raw_input(&userdata, data) };
            }

            unsafe { DefWindowProcW(window, msg, wparam, lparam) }
        },

        _ if msg == USER_EVENT_MSG_ID.get() => {
            // synthesis a placeholder UserEvent, so that if the callback is
            // re-entered it can be buffered for later delivery. the real
            // user event is still in the mpsc channel and will be pulled
            // once the placeholder event is delivered to the wrapper
            // `event_handler`
            userdata.send_event(Event::UserWakeUp);
            0
        },
        _ if msg == EXEC_MSG_ID.get() => {
            let mut function: ThreadExecFn = unsafe { Box::from_raw(wparam as *mut _) };
            function();
            0
        },
        _ => unsafe { DefWindowProcW(window, msg, wparam, lparam) },
    };

    let result = userdata.event_loop_runner.catch_unwind(callback).unwrap_or(-1);
    if userdata_removed {
        drop(userdata);
    } else {
        Box::leak(userdata);
    }
    result
}

unsafe fn handle_raw_input(userdata: &ThreadMsgTargetData, data: RAWINPUT) {
    use crate::event::DeviceEvent::{Button, Key, MouseWheel, PointerMotion};
    use crate::event::ElementState::{Pressed, Released};
    use crate::event::MouseScrollDelta::LineDelta;

    let device_id = Some(wrap_device_id(data.header.hDevice as _));

    if data.header.dwType == RIM_TYPEMOUSE {
        let mouse = unsafe { data.data.mouse };

        if util::has_flag(mouse.usFlags as u32, MOUSE_MOVE_RELATIVE) {
            let x = mouse.lLastX as f64;
            let y = mouse.lLastY as f64;

            if x != 0.0 || y != 0.0 {
                userdata.send_event(Event::DeviceEvent {
                    device_id,
                    event: PointerMotion { delta: (x, y) },
                });
            }
        }

        let button_flags = unsafe { mouse.Anonymous.Anonymous.usButtonFlags };
        if util::has_flag(button_flags as u32, RI_MOUSE_WHEEL) {
            let button_data = unsafe { mouse.Anonymous.Anonymous.usButtonData } as i16;
            let delta = button_data as f32 / WHEEL_DELTA as f32;
            userdata.send_event(Event::DeviceEvent {
                device_id,
                event: MouseWheel { delta: LineDelta(0.0, delta) },
            });
        }
        if util::has_flag(button_flags as u32, RI_MOUSE_HWHEEL) {
            let button_data = unsafe { mouse.Anonymous.Anonymous.usButtonData } as i16;
            let delta = -button_data as f32 / WHEEL_DELTA as f32;
            userdata.send_event(Event::DeviceEvent {
                device_id,
                event: MouseWheel { delta: LineDelta(delta, 0.0) },
            });
        }

        let button_state = raw_input::get_raw_mouse_button_state(button_flags as u32);
        for (button, state) in button_state.iter().enumerate() {
            if let Some(state) = *state {
                userdata.send_event(Event::DeviceEvent {
                    device_id,
                    event: Button { button: button as _, state },
                });
            }
        }
    } else if data.header.dwType == RIM_TYPEKEYBOARD {
        let keyboard = unsafe { data.data.keyboard };

        let pressed = keyboard.Message == WM_KEYDOWN || keyboard.Message == WM_SYSKEYDOWN;
        let released = keyboard.Message == WM_KEYUP || keyboard.Message == WM_SYSKEYUP;

        if !pressed && !released {
            return;
        }

        if let Some(physical_key) = raw_input::get_keyboard_physical_key(keyboard) {
            let state = if pressed { Pressed } else { Released };

            userdata.send_event(Event::DeviceEvent {
                device_id,
                event: Key(RawKeyEvent { physical_key, state }),
            });
        }
    }
}

enum PointerMoveKind {
    /// Pointer enterd to the window.
    Enter,
    /// Pointer leaved the window client area.
    Leave,
    /// Pointer is inside the window or `GetClientRect` failed.
    None,
}

fn get_pointer_move_kind(
    window: HWND,
    mouse_was_inside_window: bool,
    x: i32,
    y: i32,
) -> PointerMoveKind {
    let rect: RECT = unsafe {
        let mut rect: RECT = mem::zeroed();
        if GetClientRect(window, &mut rect) == false.into() {
            return PointerMoveKind::None; // exit early if GetClientRect failed
        }
        rect
    };

    let x = (rect.left..rect.right).contains(&x);
    let y = (rect.top..rect.bottom).contains(&y);

    if !mouse_was_inside_window && x && y {
        PointerMoveKind::Enter
    } else if mouse_was_inside_window && !(x && y) {
        PointerMoveKind::Leave
    } else {
        PointerMoveKind::None
    }
}