[Feature]:从spu层面做mpc, 数据是如何传输的？

[notinghere]

Feature Request Type

Usability

Have you searched existing issues?

Yes

Is your feature request related to a problem?

no

Describe features you want to add to SPU

一 步骤

1. 在 sml/metrics/regression/regression_test.py 代码中，发现实际使用了模拟器 sim = spsim.Simulator.simple(
   3, spu_pb2.ProtocolKind.ABY3, spu_pb2.FieldType.FM64)。
2. 在模拟器中 spu/utils/simulation.py 中，函数实际调用的时候。会将双方数据都传入，然后做 params = [
   self.io.make_shares(x, spu_pb2.Visibility.VIS_SECRET) for x in flat_args]。
3. 模拟器执行job的时候，双方可以直接将双方makeshare以后的数据直接 set_var 进行计算。

def __call__(self, executable, *flat_args):
        flat_args = [np.array(jnp.array(x)) for x in flat_args]
        params = [
            self.io.make_shares(x, spu_pb2.Visibility.VIS_SECRET) for x in flat_args
        ]

        lctx_desc = libspu.link.Desc()
        for rank in range(self.wsize):
            lctx_desc.add_party(f"id_{rank}", f"thread_{rank}")

        def wrapper(rank):
            lctx = libspu.link.create_mem(lctx_desc, rank)
            rank_config = spu_pb2.RuntimeConfig()
            rank_config.CopyFrom(self.rt_config)
            if rank != 0:
                # rank_config.enable_pphlo_trace = False
                rank_config.enable_action_trace = False
                rank_config.enable_hal_profile = False
                rank_config.enable_pphlo_profile = False
            rt = spu_api.Runtime(lctx, rank_config)

            # do infeed.
            for idx, param in enumerate(params):
                rt.set_var(executable.input_names[idx], param[rank])

            # run
            rt.run(executable)

            # do outfeed
            return [rt.get_var(name) for name in executable.output_names]

        jobs = [
            PropagatingThread(target=wrapper, args=(rank,))
            for rank in range(self.wsize)
        ]

        [job.start() for job in jobs]
        parties = [job.join() for job in jobs]

        outputs = zip(*parties)
        return [self.io.reconstruct(out) for out in outputs]

二 问题

1. 假设2方进行mpc。计算的函数为：

def array_sum(array1,array2):
    return jnp.add(array1,array2)

双方数据为 data_alice 和 data_bob， 双方需要通过网络进行交互。此时应该如何传入数据呢？

Describe features you want to add to SPU

• 多方传入数据和方法，可以直接计算结果。

[tpppppub]

make_shares 和 set_var 是 spu io 的 api。在生产环境请使用 secretflow 参考 secretflow 的用法，secretflow 会屏蔽这些细节。

[notinghere]

make_shares 和 set_var 是 spu io 的 api。在生产环境请使用 secretflow 参考 secretflow 的用法，secretflow 会屏蔽这些细节。

如果仅通过spu 来做，这里的通信应该如何来做？有没有例子可参考？

[tpppppub]

请参考 examples 下的例子，SPU distributed 也做了一个类 ray 的封装，用户不用直接调这些 io api

[notinghere]

请参考 examples 下的例子，SPU distributed 也做了一个类 ray 的封装，用户不用直接调这些 io api

我执行了一下这个例子

# Start nodes.
# > bazel run -c opt //examples/python/utils:nodectl -- up
#
# Run this example script.
# > bazel run -c opt //examples/python:millionaire

第二步骤的时候会报错

···
INFO: Running command line: bazel-bin/examples/python/millionaire
Traceback (most recent call last):
File "/home/evan/.cache/bazel/_bazel_evan/4a656ca15a246bdf6bb10b4bec038b57/execroot/spulib/bazel-out/k8-opt/bin/examples/python/millionaire.runfiles/spulib/examples/python/millionaire.py", line 40, in
ppd.init(conf["nodes"], conf["devices"])
File "/home/evan/.cache/bazel/_bazel_evan/4a656ca15a246bdf6bb10b4bec038b57/execroot/spulib/bazel-out/k8-opt/bin/examples/python/millionaire.runfiles/spulib/spu/utils/distributed_impl.py", line 1171, in init
_CONTEXT = HostContext(nodes_def, devices_def)
File "/home/evan/.cache/bazel/_bazel_evan/4a656ca15a246bdf6bb10b4bec038b57/execroot/spulib/bazel-out/k8-opt/bin/examples/python/millionaire.runfiles/spulib/spu/utils/distributed_impl.py", line 1091, in init
self.devices[name] = SPU(
File "/home/evan/.cache/bazel/_bazel_evan/4a656ca15a246bdf6bb10b4bec038b57/execroot/spulib/bazel-out/k8-opt/bin/examples/python/millionaire.runfiles/spulib/spu/utils/distributed_impl.py", line 1006, in init
results = [future.result() for future in futures]
File "/home/evan/.cache/bazel/_bazel_evan/4a656ca15a246bdf6bb10b4bec038b57/execroot/spulib/bazel-out/k8-opt/bin/examples/python/millionaire.runfiles/spulib/spu/utils/distributed_impl.py", line 1006, in
results = [future.result() for future in futures]
File "/home/evan/miniconda3/envs/venv3.10/lib/python3.10/concurrent/futures/_base.py", line 451, in result
return self.__get_result()
File "/home/evan/miniconda3/envs/venv3.10/lib/python3.10/concurrent/futures/_base.py", line 403, in __get_result
raise self._exception
File "/home/evan/miniconda3/envs/venv3.10/lib/python3.10/concurrent/futures/thread.py", line 58, in run
result = self.fn(*self.args, **self.kwargs)
File "/home/evan/.cache/bazel/_bazel_evan/4a656ca15a246bdf6bb10b4bec038b57/execroot/spulib/bazel-out/k8-opt/bin/examples/python/millionaire.runfiles/spulib/spu/utils/distributed_impl.py", line 247, in run
return self._call(self._stub.Run, fn, *args, **kwargs)
File "/home/evan/.cache/bazel/_bazel_evan/4a656ca15a246bdf6bb10b4bec038b57/execroot/spulib/bazel-out/k8-opt/bin/examples/python/millionaire.runfiles/spulib/spu/utils/distributed_impl.py", line 236, in _call
rsp_data = rebuild_messages(rsp_itr.data for rsp_itr in rsp_gen)
File "/home/evan/.cache/bazel/_bazel_evan/4a656ca15a246bdf6bb10b4bec038b57/execroot/spulib/bazel-out/k8-opt/bin/examples/python/millionaire.runfiles/spulib/spu/utils/distributed_impl.py", line 214, in rebuild_messages
return b''.join([msg for msg in msgs])
File "/home/evan/.cache/bazel/_bazel_evan/4a656ca15a246bdf6bb10b4bec038b57/execroot/spulib/bazel-out/k8-opt/bin/examples/python/millionaire.runfiles/spulib/spu/utils/distributed_impl.py", line 214, in
return b''.join([msg for msg in msgs])
File "/home/evan/.cache/bazel/_bazel_evan/4a656ca15a246bdf6bb10b4bec038b57/execroot/spulib/bazel-out/k8-opt/bin/examples/python/millionaire.runfiles/spulib/spu/utils/distributed_impl.py", line 236, in
rsp_data = rebuild_messages(rsp_itr.data for rsp_itr in rsp_gen)
File "/home/evan/miniconda3/envs/venv3.10/lib/python3.10/site-packages/grpc/_channel.py", line 543, in next
return self._next()
File "/home/evan/miniconda3/envs/venv3.10/lib/python3.10/site-packages/grpc/_channel.py", line 969, in _next
raise self
grpc._channel._MultiThreadedRendezvous: <_MultiThreadedRendezvous of RPC that terminated with:
status = StatusCode.UNAVAILABLE
details = "failed to connect to all addresses; last error: UNKNOWN: ipv4:127.0.0.1:61920: Failed to connect to remote host: connect: Connection refused (111)"
debug_error_string = "UNKNOWN:Error received from peer {grpc_message:"failed to connect to all addresses; last error: UNKNOWN: ipv4:127.0.0.1:61920: Failed to connect to remote host: connect: Connection refused (111)", grpc_status:14, created_time:"2024-11-06T16:45:23.236415463+08:00"}"

···

[tpppppub]

运行第二行命令需要保持第一行命令一直运行

[notinghere]

运行第二行命令需要保持第一行命令一直运行
好了，有个地方我搞错了。谢谢老师

[notinghere]

运行第二行命令需要保持第一行命令一直运行

你好，老师，我看用例里面，都是单方发起，数据也都是单方传入，有没有多方传入参数的用例？

[tpppppub]

和 secretflow 一样，用例只是一个 dirver 程序，p1 和 p2 就是在不同方执行的

[notinghere]

和 secretflow 一样，用例只是一个 dirver 程序，p1 和 p2 就是在不同方执行的

以 examples/python/millionaire.py 这个为例。最后z = compare(x, y) 函数由哪一方执行，x,y 由于属于不同参与方，数据如何汇聚到一方呢？

[tpppppub]

@ppd.device 这个 decorator 已经标明了这个函数在哪个 device 执行。数据如何进入 SPU runtime 运行就是基于 make_shares、set_var 等 SPU IO 实现的，这里已经屏蔽了相应细节，用户无感。如果想了解细节请参考 SPU device 的代码。

[notinghere]

@ppd.device 这个 decorator 已经标明了这个函数在哪个 device 执行。数据如何进入 SPU runtime 运行就是基于 make_shares、set_var 等 SPU IO 实现的，这里已经屏蔽了相应细节，用户无感。如果想了解细节请参考 SPU device 的代码。

• 以这个为例 examples/python/millionaire.py

# Copyright 2021 Ant Group Co., Ltd.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.


# Start nodes.
# > bazel run -c opt //examples/python/utils:nodectl -- up
#
# Run this example script.
# > bazel run -c opt //examples/python:millionaire


import argparse
import json
import logging

import jax.numpy as jnp
import numpy as np

import spu.utils.distributed as ppd

parser = argparse.ArgumentParser(description='distributed driver.')
parser.add_argument("-c", "--config", default="examples/python/conf/3pc.json")
args = parser.parse_args()

with open(args.config, 'r') as file:
    conf = json.load(file)

print(">>>> init")
ppd.init(conf["nodes"], conf["devices"])

@ppd.device("P1")
def rand_from_alice():
    logging.info("make a private variable on P1, it's known only for P1.")
    np.random.seed()
    return np.random.randint(100, size=(4,))


@ppd.device("P2")
def rand_from_bob():
    logging.info("make a private variable on P2, it's known only for P2.")
    np.random.seed()
    return np.random.randint(100, size=(4,))


@ppd.device("SPU")
def compare(x, y):
    logging.info("compute the max of two parameter, unknown for all parties.")
    return jnp.maximum(x, y)

x = rand_from_alice()
y = rand_from_bob()

# x & y will be automatically fetch by SPU (as secret shares)
# z will be evaluated as an SPU function.
z = compare(x, y)

print(f"z({type(z)} is a device object ref, we can not access it directly.")
print(f"use ppd.get to get the object from device to this host")
print(f"x = {ppd.get(x)}")
print(f"y = {ppd.get(y)}")
print(f"z = {ppd.get(z)}")

这段代码如果是部署在两方，P1 方只需要传入P1的数据，P2方传入P2的数据。

1. compare 函数由哪一方传入。然后由哪一方触发执行compare 函数。怎么触发？
   例如：z = compare(x, y) ，此时P1,P2 方不具备完整的x,y 数据。 如果有spu 执行，P1 方用哪种方式触发执行？

[tpppppub]

P1 和 P2 只需要启动节点，这段代码只是描述计算任务和触发计算任务的 driver

[tpppppub]

可以参考隐语文档 https://www.secretflow.org.cn/zh-CN/docs/secretflow/v1.10.0b1/developer/design/programming_in_secretflow

[notinghere]

P1 和 P2 只需要启动节点，这段代码只是描述计算任务和触发计算任务的 driver

这个 driver 由哪一方启动？

[tpppppub]

这个例子里任何一方都可以启动

[notinghere]

这个例子里任何一方都可以启动

**多控制器执行的核心思路是每个参与方都运行同一份代码，但是仅执行代码中属于自己的部分。

假如我们把代码逻辑看成一个DAG（有向无环图），DAG的每个节点表示一段属于某个参与方的代码逻辑，边表示不同节点之间的数据流转，则多控制器执行原理可以如图所示。**

我大概明白了，相当于双方都执行这个代码，然后按照约定执行各自的部分。

{
    "id": "outsourcing.3pc",
    "nodes": {
        "node:0": "127.0.0.1:61920",
        "node:1": "127.0.0.1:61921",
        "node:2": "127.0.0.1:61922",
        "node:3": "127.0.0.1:61923",
        "node:4": "127.0.0.1:61924"
    },
    "devices": {
        "SPU": {
            "kind": "SPU",
            "config": {
                "node_ids": [
                    "node:0",
                    "node:1",
                    "node:2"
                ],
                "spu_internal_addrs": [
                    "127.0.0.1:61930",
                    "127.0.0.1:61931",
                    "127.0.0.1:61932"
                ],
                "experimental_data_folder": [
                    "/tmp/spu_data_0/",
                    "/tmp/spu_data_1/",
                    "/tmp/spu_data_2/"
                ],
                "runtime_config": {
                    "protocol": "ABY3",
                    "field": "FM64",
                    "enable_pphlo_profile": true,
                    "enable_hal_profile": true
                }
            }
        },
        "P1": {
            "kind": "PYU",
            "config": {
                "node_id": "node:3"
            }
        },
        "P2": {
            "kind": "PYU",
            "config": {
                "node_id": "node:4"
            }
        }
    }
}

上面这个配置，在哪个地方增加 'self_party': '' 以后，双方就可以各自执行各自的部分了？

[tpppppub]

spu 本身没有这种能力，对安全性要求较高的生产环境请通过 secretflow 的生产模式来使用 spu，其提供多控制器模式支持 https://www.secretflow.org.cn/zh-CN/docs/secretflow/v1.3.0b0/getting_started/deployment#production

[notinghere]

SPU distributed

嗯，我现在是想用 SPU distributed 测试模拟一下多方的跑法，所以，这个配置里面有没有可以配置类似sf 中self_party 的位置，这样我可以开两个终端，分别以 Alice和bob 的模式让他们跑起来？

[tpppppub]

如果只是模拟，只需要把第一步启动 nodectl 的过程改成在每一方启动 node，然后运行一个 driver 即可

[notinghere]

如果只是模拟，只需要把第一步启动 nodectl 的过程改成在每一方启动 node，然后运行一个 driver 即可

老师，driver 可以分开执行吗？

[tpppppub]

P1 和 P2 只需要启动节点，这段代码只是描述计算任务和触发计算任务的 driver

前面已经提到了，driver 只是“描述计算任务和触发计算任务”，真正执行计算的是 node，没懂为什么要 driver 分开执行

[notinghere]

P1 和 P2 只需要启动节点，这段代码只是描述计算任务和触发计算任务的 driver

前面已经提到了，driver 只是“描述计算任务和触发计算任务”，真正执行计算的是 node，没懂为什么要 driver 分开执行

1. 我看到node 仅是做计算操作，属于常驻服务。
2. driver 描述计算任务。同时也担当了数据输入和结果输出的作用。如果仅一方执行driver，怎么做数据输入和结果获取呢？

[tpppppub]

rand_from_alice 只是示例，你可以改成从 p1 本地文件读取的函数

[notinghere]

rand_from_alice 只是示例，你可以改成从 p1 本地文件读取的函数

1. 是不是意味着 driver 中的方法与机器资源相关了，alice 操作数据的时候如果需要用到一些操作库，那么alice对应的机器上就需要提前部署好。
2. 如果bob执行driver, alice 如果需要一些输入和输出，也只能通过在json文件中配置地址，然后通过文件io操作。
3. 如果在这个步骤以后需要做别的操作，没有执行driver的一方如何被通知到呢？

[tpppppub]

1: 是。
2&3: alice、bob 的输入输出都可以通过文件 io 操作，整个流程都写在 driver 里。

[github-actions]

Stale issue message. Please comment to remove stale tag. Otherwise this issue will be closed soon.