SketchOnSheetMetalCmd.py

# -*- coding: utf-8 -*-
##############################################################################
#
#  SketchOnSheetMetalCmd.py
#
#  Copyright 2015 Shai Seger <shaise at gmail dot com>
#
#  This program is free software; you can redistribute it and/or
#  modify it under the terms of the GNU Lesser General Public
#  License as published by the Free Software Foundation; either
#  version 2 of the License, or (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU Lesser General Public
#  License along with this program; if not, write to the Free Software
#  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
#  MA 02110-1301, USA.
#
#
##############################################################################

import math
import os
import FreeCAD
import Part
import SheetMetalTools
import SheetMetalBendSolid

smEpsilon = SheetMetalTools.smEpsilon

def bendAngle(theFace, edge_vec):
    # Start to investigate the angles at self.__Shape.Faces[face_idx].ParameterRange[0]
    # Part.show(theFace,"theFace")
    # valuelist =  theFace.ParameterRange
    # print(valuelist)
    angle_0 = theFace.ParameterRange[0]
    angle_1 = theFace.ParameterRange[1]

    # idea: identify the angle at edge_vec = P_edge.Vertexes[0].copy().Point
    # This will be = angle_start
    # calculate the tan_vec from valueAt
    edgeAngle, edgePar = theFace.Surface.parameter(edge_vec)
    # print('the angles: ', angle_0, ' ', angle_1, ' ', edgeAngle, ' ', edgeAngle - 2*math.pi)

    if SheetMetalTools.smIsEqualAngle(angle_0, edgeAngle):
        angle_start = angle_0
        angle_end = angle_1
    else:
        angle_start = angle_1
        angle_end = angle_0
    bend_angle = angle_end - angle_start
    #  angle_tan = angle_start + bend_angle/6.0 # need to have the angle_tan before correcting the sign

    if bend_angle < 0.0:
        bend_angle = -bend_angle
    # print(math.degrees(bend_angle))
    return math.degrees(bend_angle)


def smSketchOnSheetMetal(
    kfactor=0.5, sketch="", flipped=False, selFaceNames="", MainObject=None
):
    resultSolid = MainObject.Shape.copy()
    selElement = resultSolid.getElement(SheetMetalTools.getElementFromTNP(selFaceNames[0]))
    LargeFace = SheetMetalTools.smGetFaceByEdge(selElement, resultSolid)
    sketch_face = Part.makeFace(sketch.Shape.Wires, "Part::FaceMakerBullseye")

    # To get thk of sheet, top face normal
    thk = SheetMetalTools.smGetThickness(resultSolid, LargeFace)
    # print(thk)

    # To get top face normal, flatsolid
    solidlist = []
    normal = LargeFace.normalAt(0, 0)
    # To check face direction
    coeff = normal.dot(sketch_face.Faces[0].normalAt(0, 0))
    if coeff < 0:
        sketch_face.reverse()
    Flatface = sketch_face.common(LargeFace)
    BalanceFaces = sketch_face.cut(Flatface)
    # Part.show(BalanceFace,"BalanceFace")
    Flatsolid = Flatface.extrude(normal * -thk)
    # Part.show(Flatsolid,"Flatsolid")
    solidlist.append(Flatsolid)

    if BalanceFaces.Faces:
        for BalanceFace in BalanceFaces.Faces:
            # Part.show(BalanceFace,"BalanceFace")
            TopFace = LargeFace
            # Part.show(TopFace,"TopFace")
            # flipped = False
            while BalanceFace.Faces:
                BendEdge = SheetMetalTools.smGetIntersectingEdge(BalanceFace, TopFace)
                # Part.show(BendEdge,"BendEdge")
                facelist = resultSolid.ancestorsOfType(BendEdge, Part.Face)

                # To get bend radius, bend angle
                for cylface in facelist:
                    if issubclass(type(cylface.Surface), Part.Cylinder):
                        break
                if not (issubclass(type(cylface.Surface), Part.Cylinder)):
                    break
                # Part.show(cylface,"cylface")
                for planeface in facelist:
                    if issubclass(type(planeface.Surface), Part.Plane):
                        break
                # Part.show(planeface,"planeface")
                normal = planeface.normalAt(0, 0)
                revAxisV = cylface.Surface.Axis
                revAxisP = cylface.Surface.Center
                bendA = bendAngle(cylface, revAxisP)
                # print([bendA, revAxisV, revAxisP, cylface.Orientation])

                # To check bend direction
                offsetface = cylface.makeOffsetShape(-thk, 0.0, fill=False)
                # Part.show(offsetface,"offsetface")
                if offsetface.Area < cylface.Area:
                    bendR = cylface.Surface.Radius - thk
                    flipped = True
                else:
                    bendR = cylface.Surface.Radius
                    flipped = False
                # To arrive unfold Length, neutralRadius
                unfoldLength = (bendR + kfactor * thk) * abs(bendA) * math.pi / 180.0
                neutralRadius = bendR + kfactor * thk
                # print([unfoldLength,neutralRadius])

                # To get faceNormal, bend face
                faceNormal = normal.cross(revAxisV).normalize()
                # print(faceNormal)
                if bendR < cylface.Surface.Radius:
                    offsetSolid = cylface.makeOffsetShape(bendR / 2.0, 0.0, fill=True)
                else:
                    offsetSolid = cylface.makeOffsetShape(-bendR / 2.0, 0.0, fill=True)
                # Part.show(offsetSolid,"offsetSolid")
                tool = BendEdge.copy()
                FaceArea = tool.extrude(faceNormal * -unfoldLength)
                # Part.show(FaceArea,"FaceArea")
                # Part.show(BalanceFace,"BalanceFace")
                SolidFace = offsetSolid.common(FaceArea)
                # Part.show(BendSolidFace,"BendSolidFace")
                if not (SolidFace.Faces):
                    faceNormal = faceNormal * -1
                    FaceArea = tool.extrude(faceNormal * -unfoldLength)
                BendSolidFace = BalanceFace.common(FaceArea)
                # Part.show(FaceArea,"FaceArea")
                # Part.show(BendSolidFace,"BendSolidFace")
                # print([bendR, bendA, revAxisV, revAxisP, normal, flipped, BendSolidFace.Faces[0].normalAt(0,0)])

                bendsolid = SheetMetalBendSolid.bend_solid(
                    BendSolidFace.Faces[0],
                    BendEdge,
                    bendR,
                    thk,
                    neutralRadius,
                    revAxisV,
                    flipped,
                )
                # Part.show(bendsolid,"bendsolid")
                solidlist.append(bendsolid)

                if flipped == True:
                    bendA = -bendA
                if not (SolidFace.Faces):
                    revAxisV = revAxisV * -1
                sketch_face = BalanceFace.cut(BendSolidFace)
                sketch_face.translate(faceNormal * unfoldLength)
                # Part.show(sketch_face,"sketch_face")
                sketch_face.rotate(revAxisP, -revAxisV, bendA)
                # Part.show(sketch_face,"Rsketch_face")
                TopFace = SheetMetalTools.smGetIntersectingFace(sketch_face, resultSolid)
                # Part.show(TopFace,"TopFace")

                # To get top face normal, flatsolid
                normal = TopFace.normalAt(0, 0)
                Flatface = sketch_face.common(TopFace)
                BalanceFace = sketch_face.cut(Flatface)
                # Part.show(BalanceFace,"BalanceFace")
                Flatsolid = Flatface.extrude(normal * -thk)
                # Part.show(Flatsolid,"Flatsolid")
                solidlist.append(Flatsolid)
    # To get relief Solid fused
    if len(solidlist) > 1:
        SMSolid = solidlist[0].multiFuse(solidlist[1:])
        # Part.show(SMSolid,"SMSolid")
        SMSolid = SMSolid.removeSplitter()
    else:
        SMSolid = solidlist[0]
    # Part.show(SMSolid,"SMSolid")
    resultSolid = resultSolid.cut(SMSolid)
    SheetMetalTools.smHideObjects(MainObject, sketch)
    return resultSolid


class SMSketchOnSheet:
    def __init__(self, obj, selobj, sel_items, selsketch):
        '''"Add Sketch based cut On Sheet metal"'''
        _tip_ = FreeCAD.Qt.translate("App::Property", "Base Object")
        obj.addProperty(
            "App::PropertyLinkSub", "baseObject", "Parameters", _tip_
        ).baseObject = (selobj, sel_items)
        _tip_ = FreeCAD.Qt.translate("App::Property", "Sketch on Sheetmetal")
        obj.addProperty(
            "App::PropertyLink", "Sketch", "Parameters", _tip_
        ).Sketch = selsketch
        _tip_ = FreeCAD.Qt.translate("App::Property", "Gap from Left Side")
        obj.addProperty(
            "App::PropertyFloatConstraint", "kfactor", "Parameters", _tip_
        ).kfactor = (0.5, 0.0, 1.0, 0.01)
        self.addVerifyProperties(obj)
        obj.Proxy = self

    def addVerifyProperties(self, obj):
        '''"Add new properties to the object here and not on init"'''
        pass

    def execute(self, fp):
        '''"Print a short message when doing a recomputation, this method is mandatory"'''

        s = smSketchOnSheetMetal(
            kfactor=fp.kfactor,
            sketch=fp.Sketch,
            selFaceNames=fp.baseObject[1],
            MainObject=fp.baseObject[0],
        )
        fp.Shape = s


##########################################################################################################
# Gui code
##########################################################################################################

if SheetMetalTools.isGuiLoaded():
    from FreeCAD import Gui

    icons_path = SheetMetalTools.icons_path

    class SMSketchOnSheetVP(SheetMetalTools.SMViewProvider):
        ''' Part WB style ViewProvider '''        
        def getIcon(self):
            return os.path.join(icons_path, "SheetMetal_SketchOnSheet.svg")
        
        def getTaskPanel(self, obj):
            return SMWrappedCutoutTaskPanel(obj)

    class SMSketchOnSheetPDVP(SMSketchOnSheetVP):
        ''' Part Design WB style ViewProvider - backward compatibility only''' 

    class SMWrappedCutoutTaskPanel:
        '''A TaskPanel for the Sheetmetal Wrapped Cutout'''

        def __init__(self, obj):
            self.obj = obj
            self.form = SheetMetalTools.taskLoadUI("WrappedCutoutPanel.ui")
            obj.Proxy.addVerifyProperties(obj) # Make sure all properties are added

            self.faceSelParams = SheetMetalTools.taskConnectSelectionSingle(
                self.form.pushFace, self.form.txtFace, obj, "baseObject", ["Face"])
            self.sketchSelParams = SheetMetalTools.taskConnectSelectionSingle(
                self.form.pushSketch, self.form.txtSketch, obj, "Sketch", ("Sketcher::SketchObject", []))
            SheetMetalTools.taskConnectSpin(obj, self.form.floatKFactor, "kfactor")
 
        def isAllowedAlterSelection(self):
            return True

        def isAllowedAlterView(self):
            return True

        def accept(self):
            SheetMetalTools.taskAccept(self)
            self.obj.Sketch.ViewObject.hide() # Hide sketch after click OK button
            return True
        
        def reject(self):
            SheetMetalTools.taskReject(self)


    class AddSketchOnSheetCommandClass:
        """Add Wrap cutout command"""

        def GetResources(self):
            return {
                "Pixmap": os.path.join(
                    icons_path, "SheetMetal_SketchOnSheet.svg"
                ),  # the name of a svg file available in the resources
                "MenuText": FreeCAD.Qt.translate("SheetMetal", "Wrap Cutout"),
                "Accel": "M, S",
                "ToolTip": FreeCAD.Qt.translate(
                    "SheetMetal",
                    "Wrap cutout from a Sketch On Sheet metal faces\n"
                    "1. Select a flat face on sheet metal and\n"
                    "2. Select a sketch on same face to create sheetmetal wrapped cut.\n"
                    "3. Use Property editor to modify other parameters",
                ),
            }

        def Activated(self):
            sel = Gui.Selection.getSelectionEx()[0]
            selobj = Gui.Selection.getSelectionEx()[0].Object
            selected_faces = sel.SubElementNames[0]
            selected_sketch = Gui.Selection.getSelectionEx()[1].Object
            newObj, activeBody = SheetMetalTools.smCreateNewObject(selobj, "WrappedCutout")
            if newObj is None:
                return
            SMSketchOnSheet(newObj, selobj, selected_faces, selected_sketch)
            SMSketchOnSheetVP(newObj.ViewObject)
            SheetMetalTools.smAddNewObject(selobj, newObj, activeBody, SMWrappedCutoutTaskPanel)

        def IsActive(self):
            if len(Gui.Selection.getSelection()) < 2:
                return False
            #    selobj = Gui.Selection.getSelection()[1]
            #    if str(type(selobj)) != "<type 'Sketcher.SketchObject'>" :
            #      return False
            return True


    Gui.addCommand("SheetMetal_SketchOnSheet", AddSketchOnSheetCommandClass())