printer-20231130_235843.cfg

# This file contains common pin mappings for the BigTreeTech Octopus V1.


## Includes

[include configs/*.cfg]
[include configs/hardware/*.cfg]
[include configs/software/*.cfg]
[include macros/print_base/*.cfg]
[include macros/helpers/*.cfg]

#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [stepper_z]
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 	  0.038556, 0.069806, 0.048556, 0.079806, -0.000194
#*# 	  -0.000194, 0.028556, 0.009806, 0.033556, 0.004806
#*# 	  -0.013944, 0.012306, -0.000194, 0.016056, -0.020194
#*# 	  -0.002694, 0.026056, 0.039806, 0.048556, 0.009806
#*# x_count = 5
#*# y_count = 4
#*# mesh_x_pps = 2
#*# mesh_y_pps = 2
#*# algo = lagrange
#*# tension = 0.2
#*# min_x = 40.0
#*# max_x = 280.48
#*# min_y = 83.57
#*# max_y = 216.41
#*#
#*# [bed_mesh Bed 60]
#*# version = 1
#*# points =
#*# 	-0.261250, -0.235000, -0.198750, -0.176250, -0.152500, -0.118750, -0.132500
#*# 	-0.260000, -0.213750, -0.158750, -0.133750, -0.108750, -0.078750, -0.072500
#*# 	-0.228750, -0.170000, -0.112500, -0.080000, -0.033750, 0.011250, 0.030000
#*# 	-0.181250, -0.115000, -0.048750, 0.000000, 0.052500, 0.097500, 0.130000
#*# 	-0.142500, -0.058750, 0.017500, 0.081250, 0.142500, 0.206250, 0.248750
#*# 	-0.076250, 0.016250, 0.111250, 0.188750, 0.263750, 0.337500, 0.388750
#*# 	-0.021250, 0.091250, 0.193750, 0.280000, 0.373750, 0.456250, 0.525000
#*# x_count = 7
#*# y_count = 7
#*# mesh_x_pps = 2
#*# mesh_y_pps = 2
#*# algo = bicubic
#*# tension = 0.2
#*# min_x = 40.0
#*# max_x = 259.96
#*# min_y = 40.0
#*# max_y = 259.96000000000004
#*#
#*# [probe]
#*# z_offset = -1.280
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 39.334
#*# pid_ki = 11.919
#*# pid_kd = 32.450
#*#
#*# [heater_bed]
#*# control = pid
#*# pid_kp = 41.013
#*# pid_ki = 0.896
#*# pid_kd = 469.090