csthesis.sty

%%
%% This is file `csthesis.sty',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% csthesis.dtx  (with options: `package')
%% 
%% IMPORTANT NOTICE:
%% 
%% For the copyright see the source file.
%% 
%% Any modified versions of this file must be renamed
%% with new filenames distinct from csthesis.sty.
%% 
%% For distribution of the original source see the terms
%% for copying and modification in the file csthesis.dtx.
%% 
%% This generated file may be distributed as long as the
%% original source files, as listed above, are part of the
%% same distribution. (The sources need not necessarily be
%% in the same archive or directory.)
%%
%% Comp. Science, SFU thesis style `csthesis', to be used with LaTeX2e
%% Copyright (C) 1998 Petr Pp Kubon
%%
%% History:
%%   1) 1989: Created by Stephen Chan (CSS) from Stanford PhD Thesis style
%%   2) 1996: Modifications and additions by Margaret Sharon (ACS)
%%   3) 1997-8: Further modified by Pepe Kubon to reflect current
%%   regulations
%%   4) 2003: Added "Contents" to the table of contents, Greg Baker
%%   5) 2006: Trivial change to approval page, Greg Baker
%%   6) 2011: Updated title page, Chris McIntosh
%%
\def\fileversion{V1.24}
\def\filedate{2011/12/20}


\def \mySkip{\baselineskip}%%%-- Change this if you need more spacing between ``elements''.
\def \myAppSkip{0.5in}%%%-- Change this if you need more or less spacing between committee members on the approval page (if your approval page has become two pages, lower this value).



\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{csthesis}
\typeout{Package `csthesis' \fileversion\space<\filedate>[Pepe Kubon]}
\oddsidemargin 3.8cm\advance\oddsidemargin by -1in
\evensidemargin 3.8cm\advance\evensidemargin by -1in
\if@twoside
  \advance\evensidemargin by -1.3cm
\fi  % Adjust evensidemargin if twoside option specified **MS**
\textwidth 8.5in\advance\textwidth by -3.8cm\advance\textwidth by -2.5cm
\topmargin 1in\advance\topmargin by -2.5cm
\textheight 11in
\advance\textheight by -5cm % To account for header and TeX's top margin
\advance\textheight by -2.5cm % Bottom margin
\marginparwidth 40pt \marginparsep 10pt

%% space between text, header, footer, and footnotes
\setlength{\headsep}{2\baselineskip}%% 27pt for 11pt size
\setlength{\footskip}{\headsep}
\addtolength{\footskip}{.5\baselineskip}%% 34pt for 11pt
\addtolength{\skip\footins}{1ex}%% push 1st ftn further from text
\settoheight{\footnotesep}{\footnotesize !}%% space between footnotes
\addtolength{\footnotesep}{4pt}%% 10.25pt for 11pt size
\brokenpenalty=10000

%%% line spacing - localizing magic numbers (Pp)
\newcommand{\textstretch}{1.3}
\newcommand{\tighttextstretch}{1}
\ifcase\@ptsize
  \newcommand{\doublestretch}{1.67}
\or
  \newcommand{\doublestretch}{1.62}
\or
  \newcommand{\doublestretch}{1.66}
\fi
\renewcommand{\baselinestretch}{\textstretch}

\def\@xfloat#1[#2]{\ifhmode \@bsphack\@floatpenalty -\@Mii\else
   \@floatpenalty-\@Miii\fi\def\@captype{#1}\ifinner
      \@parmoderr\@floatpenalty\z@
    \else\@next\@currbox\@freelist{\@tempcnta\csname ftype@#1\endcsname
       \multiply\@tempcnta\@xxxii\advance\@tempcnta\sixt@@n
       \@tfor \@tempa :=#2\do
                        {\if\@tempa h\advance\@tempcnta \@ne\fi
                         \if\@tempa t\advance\@tempcnta \tw@\fi
                         \if\@tempa b\advance\@tempcnta 4\relax\fi
                         \if\@tempa p\advance\@tempcnta 8\relax\fi
         }\global\count\@currbox\@tempcnta}\@fltovf\fi
    \global\setbox\@currbox
    \color@vbox\normalcolor
    \vbox\bgroup
    \def\baselinestretch{\tighttextstretch}\@normalsize
    \boxmaxdepth\z@
    \hsize\columnwidth \@parboxrestore}
\long\def\@footnotetext#1{\insert\footins{%
    \def\baselinestretch{\tighttextstretch}\footnotesize
    \interlinepenalty\interfootnotelinepenalty
    \splittopskip\footnotesep
    \splitmaxdepth \dp\strutbox \floatingpenalty \@MM
    \hsize\columnwidth \@parboxrestore
   \edef\@currentlabel{\csname p@footnote\endcsname\@thefnmark}\@makefntext
    {\rule{\z@}{\footnotesep}\ignorespaces
      #1\strut}}}

%%%  remove some space before paragraph and subparagraph
\renewcommand{\paragraph}%
  {\@startsection{paragraph}{4}{0mm}{2.5ex plus1ex minus.2ex}%
    {-1em}{\normalfont\normalsize\bfseries}}
\renewcommand{\subparagraph}%
  {\@startsection{subparagraph}{5}{\parindent}{2ex plus1ex minus.2ex}%
    {-1em}{\normalfont\normalsize\bfseries}}

%%% switches
\newif\ifcontentspage
\newif\iffigurespage
\newif\iftablespage
\newif\ifdedicationpage
\newif\ifquotationpage
\newif\ifotherlistpage
%%% defaults
\contentspagetrue
\figurespagefalse
\tablespagefalse
\dedicationpagefalse
\quotationpagefalse
\otherlistpagefalse
\def\@otherlist{%  Call user's macro \otherlist **MS**
  \otherlist
  }


%%% Title page commands
\def\@title{Name your thesis!}
\def\@author{Identify yourself!}
\gdef\qualification#1{\@qualifications{#1}}
\newsavebox{\@qual}
\newif\ifqvoid
\qvoidtrue
\def\@qualifications#1{%
  \ifqvoid
  \sbox{\@qual}{\parbox{\textwidth}
    {\begin{center}\@author\\\end{center}}}
  \qvoidfalse
  \fi
  \sbox{\@qual}{\parbox{\textwidth}
    {\begin{center}%
        \usebox{\@qual}\\%[-10pt]% possibly reduce space
        {#1}%
      \end{center}}}%
  }
\def\entity#1{\gdef\@entity{#1}}
\def\@entity{School}
\def\dept#1{\gdef\@dept{#1}}
\def\@dept{Computing Science}
\def\faculty#1{\gdef\@faculty{#1}}
\def\@faculty{Applied Sciences}
\def\degree#1{\gdef\@degree{#1}}
\def\@degree{Master of Science}
\def\endeavour#1{\gdef\@endeavour{#1}}
\def\@endeavour{Thesis}
\def\submitdate#1{\gdef\@submitdate{#1}}
\def\@submitdate{Fill in month and year of Approval!}
\def\copyrightyear#1{\gdef\@copyrightyear{\space #1}}
\def\@copyrightyear{Fill in year of Approval!}

%%%%%%%%%% Title page
\def\titlep{%
  \typeout{Title page.}
  \thispagestyle{empty}%
  \begingroup
  \null\vfill % stretchable white space
%%  You might want to change \Large to \large below if you're using 12pt
%%  as the basic font size.

%% title element
  \begin{center}
    \renewcommand{\baselinestretch}{\doublestretch}\normalsize
      \Large\bfseries\uppercase\expandafter{\@title}
    \par\renewcommand{\baselinestretch}{\textstretch}\normalsize
  \end{center}
  \vskip.25in %% not less than this after title
  \begin{center}
    \normalfont\upshape by
  \end{center}
  %\vfill
  
%% Previous degrees element
  \vspace*{-1\baselineskip} %% pushes author + quals up; adjust amount
  \begin{center}
  \usebox{\@qual}
  \end{center}
  %\vskip \mySkip
  %\vfill
  
%% ``in partial'' element
  \begin{center}
    {\scshape
      a \@endeavour\  submitted in partial fulfillment\\
      of the requirements for the degree of\\}
  \vskip \mySkip  
      \expandafter{\@degree}\\
\end{center}
  %\vskip \mySkip
  %\vfill
  
  
%% Faculty element
\begin{center}
    in the\\
\expandafter{\@entity} of \expandafter{\@dept}\\
Faculty of \expandafter{\@faculty}\\
  \end{center}
  \vskip \mySkip
  %\vfill
  
  
%% Copyright element
  \begin{center}
    \copyright\ \@author\ \@copyrightyear\\
    SIMON FRASER UNIVERSITY\\
    \@submitdate\\
  \end{center}
  \vskip \mySkip
  \vfill 
  
%% all rights reserved element
  \begin{center}
    \small
    All rights reserved.\\
However, in accordance with the \emph{Copyright Act of Canada}, this work may be\\
reproduced without authorization under the conditions for ``Fair Dealing.''\\
Therefore, limited reproduction of this work for the purposes of private study,\\
research, criticism, review and news reporting is likely to be in accordance\\
with the law, particularly if cited appropriately.
  \end{center}
  \endgroup
  \newpage%
}
\def\chair#1{\gdef\@chair{#1}}
\def\@chair{Name the committee chair!}
\gdef\signatory#1{\@signatory{#1}}
\newlength{\lwidth}% make enough space for the biggest label
\settowidth{\lwidth}{\textbf{Examining committee:\ }}
\addtolength{\lwidth}{3\labelsep}% change 3 to adjust spacing
\def\apdesclabel#1{\hspace\labelsep \bfseries #1:\hfill}
\def\apdesc{\list{}{\leftmargin\apdescmargin
\labelwidth\leftmargin \advance\labelwidth -\labelsep
\let\makelabel\apdesclabel}}
\let\endapdesc\endlist
\newdimen\apdescmargin
\apdescmargin=\lwidth
\newsavebox{\@apitems}
\def\@signatory#1{%
  \sbox{\@apitems}{%
  \begin{minipage}[t]{3.5in}\parindent=0pt
      \usebox{\@apitems}%
      \vspace{\myAppSkip}\\%- adjust 0.5in to 0.35in to change spacing between committee members. Caution
      \underline{\hspace{3.5in}}\\
      #1%
    \end{minipage}%
  }
}

%%%%%%%%%% Approval page
\def\approvalpage{%
  \typeout{Approval page.}
  \begingroup
  \begin{center}
    {\large\bfseries APPROVAL}
  \end{center}
  \addcontentsline{toc}{chapter}{Approval}
  \vskip.25in
  \begin{apdesc}
    \let\\\ % turn off the user specified line breaking.
    \item[Name] \@author
    \item[Degree] \@degree
    \item[Title of \@endeavour] \@title
  \end{apdesc}
  \vskip.25in
  \begin{apdesc}
    \item[Examining Committee]\par\@chair\\%
      Chair\\[-2\baselineskip]% adjust spacing betw. chair & rest
      \usebox{\@apitems}
  \end{apdesc}
  \vskip.25in
  \vfill
  \begin{apdesc}
    \item[Date Approved] \ \hrulefill\
  \end{apdesc}
  \endgroup
  \vfil
  \addtolength{\textheight}{-\headkeep}
                % Else the following page number too low **MS**
  \newpage%
}


%%%%%%% Typeset Title and Approval pages
\newlength{\headkeep}
\def\beforepreface{%
  \pagenumbering{roman}
  \pagestyle{plain}
  \setlength{\headkeep}{\headsep}% keep old value
  \setlength{\headsep}{0pt}% make more space for text
  \addtolength{\textheight}{\headkeep}
  \titlep%
  \approvalpage%
  \setlength{\headsep}{\headkeep}%% restore \headsep (\textheight
                                 %% adjusted by \approvalpage)
}

%%%%%%%%% Abstract, Acknowledgment, and (optional) Preface
\def\prefacesection#1{%
  \typeout{#1.}
  \chapter*{#1}
  \addcontentsline{toc}{chapter}{#1}
}

%%%%%%%% (optional) Dedication and Quotation pages
\def\dedication#1{\gdef\@dedication{#1}}
\def\@dedication{You forgot to do\\ your own dedication!}
\def\thesquot#1{\gdef\@thesquot{#1}}
\def\@thesquot{``You forgot to do\\ your own quotation!''\\[5pt]%
  --- My Work, \textsc{I.~M.~Author}, 2001}
\newcommand{\dedicquotation}{%
  \ifdedicationpage
     \newpage
     \typeout{Dedication.}
     \vspace*{\stretch{2}}
     \begin{flushright}\itshape
       \expandafter\@dedication
     \end{flushright}
     \addcontentsline{toc}{chapter}{Dedication}
     \vspace*{\stretch{3}}
  \fi
  
%  \ifquotationpage
%     \newpage
%     \typeout{Quotation.}
%     \vspace*{\stretch{1}}
%     \begin{flushright}\slshape
%       \expandafter\@thesquot
%     \end{flushright}
%     \addcontentsline{toc}{chapter}{Quotation}
%     \vspace*{\stretch{3}}
%  \fi
}

%%%%%%%% Typeset list of Contents, Figures, Tables, etc.
\def\lists{%
  \ifcontentspage
    \newpage%
    \typeout{Contents.}
    \addcontentsline{toc}{chapter}{Contents}
    \tableofcontents%
    \newpage%
  \fi
  \iftablespage
    \addvspace{10pt}
    \typeout{Tables.}
    \addcontentsline{toc}{chapter}{List of Tables}
    \listoftables%
    \newpage%
  \fi
  \iffigurespage
    \addvspace{10pt}
    \typeout{Figures.}
    \addcontentsline{toc}{chapter}{List of Figures}
    \listoffigures%
    \newpage%
  \fi
  \ifotherlistpage
    \addvspace{10pt}
    \typeout{Other list.}
%%     \addcontentsline{toc}{chapter}{Name of my list}
    \@otherlist%
    \newpage%
  \fi
}

%%%%%%%% Transition to main text
\newcommand{\beforetext}{%
  \newpage%
  \if@twoside %% coordinate twoside option with two-sided printing
    \ifodd\c@page
    \else
      \thispagestyle{empty}
      \null\vfill
      \newpage%
    \fi
  \fi
  \pagenumbering{arabic}
  \pagestyle{headings}
}

%%%% backward compatibility with sfuthesis.sty
\let\approvalitem\signatory

%%%%%%%%%%% Leftovers from sfuthesis.sty
%%%
%%%  This stuff is for using endnotes instead of footnotes. It's probably
%%%  useless but I left it here. It's not self-sufficient, you'd
%%%  have to load also ``endnotes.sty'' package and probably fool
%%%  around with the way how things look --- not worth the trouble
%%%  if you don't have to!
%%\def\enoteformat{\rightskip\z@ \leftskip\z@ \parindent=1.8em
%%  \leavevmode\textindent{\@theenmark.}}
%%\def\enotesize{\normalsize}
%%\def\notesname{}
%%\def\printendnotes{%
%%  \typeout{Endnotes for chapter \thechapter.}
%%  \chapter*{Notes for Chapter \thechapter}
%%  \addcontentsline{toc}{section}{Notes for Chapter \thechapter}
%%  \begingroup
%%  \parskip 2ex
%%  \theendnotes%
%%  \endgroup
%%  \setcounter{endnote}{0}
%%}
%%\def\printallendnotes{%
%%  \typeout{Endnotes.}
%%  \chapter*{Notes}
%%  \addcontentsline{toc}{chapter}{Notes}
%%  \begingroup
%%  \parskip 2ex
%%  \theendnotes%
%%  \endgroup
%%}
\endinput
%%
%% End of file `csthesis.sty'.