No apps are shown in the list on Raspberry Pi Debian Bookworm 12

[Botspot]

Hello Spark Store maintainers. I am hoping you can look at this issue and try to see if it can be fixed.

No applications are shown in the list.

My Internet connection is very stable, without any issues on any other site. I am using a USA IP address though.

Here is the command-line output from installing the deb package, and running it.

pi@raspberrypi:~ $ sudo apt install /home/pi/Downloads/spark-store_4.3.0_arm64.deb
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Note, selecting 'spark-store' instead of '/home/pi/Downloads/spark-store_4.3.0_arm64.deb'
The following additional packages will be installed:
  dde-qt5integration libdtkcommon libdtkcore5 libdtkgui5 libdtkwidget5 libencode-locale-perl libfile-basedir-perl libfile-desktopentry-perl libfile-mimeinfo-perl libgsettings-qt1 libio-stringy-perl libipc-system-simple-perl
  libnotify-bin libqt5xdg3 libqt5xdgiconloader3 libregexp-ipv6-perl liburi-perl lshw qt5dxcb-plugin qttranslations5-l10n
Suggested packages:
  libbusiness-isbn-perl libwww-perl
The following NEW packages will be installed:
  dde-qt5integration libdtkcommon libdtkcore5 libdtkgui5 libdtkwidget5 libencode-locale-perl libfile-basedir-perl libfile-desktopentry-perl libfile-mimeinfo-perl libgsettings-qt1 libio-stringy-perl libipc-system-simple-perl
  libnotify-bin libqt5xdg3 libqt5xdgiconloader3 libregexp-ipv6-perl liburi-perl lshw qt5dxcb-plugin qttranslations5-l10n spark-store
0 upgraded, 21 newly installed, 0 to remove and 0 not upgraded.
Need to get 4,164 kB/4,862 kB of archives.
After this operation, 26.8 MB of additional disk space will be used.
Do you want to continue? [Y/n] 
Get:1 /home/pi/Downloads/spark-store_4.3.0_arm64.deb spark-store arm64 4.3.0 [698 kB]
Get:2 http://deb.debian.org/debian bookworm/main arm64 qt5dxcb-plugin arm64 5.0.65-1+b3 [215 kB]
Get:3 http://deb.debian.org/debian bookworm/main arm64 libdtkcommon arm64 5.5.23-2 [2,780 B]
Get:4 http://deb.debian.org/debian bookworm/main arm64 lshw arm64 02.19.git.2021.06.19.996aaad9c7-2+b1 [257 kB]
Get:5 http://deb.debian.org/debian bookworm/main arm64 libgsettings-qt1 arm64 0.2-5 [15.4 kB]
Get:6 http://deb.debian.org/debian bookworm/main arm64 libdtkcore5 arm64 5.5.33-1+b3 [274 kB]
Get:7 http://deb.debian.org/debian bookworm/main arm64 libdtkgui5 arm64 5.5.25-1+b3 [124 kB]
Get:8 http://deb.debian.org/debian bookworm/main arm64 libdtkwidget5 arm64 5.5.48-1+b3 [766 kB]
Get:9 http://deb.debian.org/debian bookworm/main arm64 libencode-locale-perl all 1.05-3 [12.9 kB]
Get:10 http://deb.debian.org/debian bookworm/main arm64 libipc-system-simple-perl all 1.30-2 [26.8 kB]
Get:11 http://deb.debian.org/debian bookworm/main arm64 libfile-basedir-perl all 0.09-2 [15.1 kB]
Get:12 http://deb.debian.org/debian bookworm/main arm64 libregexp-ipv6-perl all 0.03-3 [5,212 B]
Get:13 http://deb.debian.org/debian bookworm/main arm64 liburi-perl all 5.17-1 [90.4 kB]
Get:14 http://deb.debian.org/debian bookworm/main arm64 libfile-desktopentry-perl all 0.22-3 [17.6 kB]
Get:15 http://deb.debian.org/debian bookworm/main arm64 libfile-mimeinfo-perl all 0.33-1 [48.3 kB]
Get:16 http://deb.debian.org/debian bookworm/main arm64 libqt5xdgiconloader3 arm64 3.10.0-2+b2 [36.6 kB]
Get:17 http://deb.debian.org/debian bookworm/main arm64 libqt5xdg3 arm64 3.10.0-2+b2 [87.4 kB]
Get:18 http://deb.debian.org/debian bookworm/main arm64 dde-qt5integration arm64 5.5.23-1+b4 [263 kB]
Get:19 http://deb.debian.org/debian bookworm/main arm64 libio-stringy-perl all 2.111-3 [56.5 kB]
Get:20 http://deb.debian.org/debian bookworm/main arm64 libnotify-bin arm64 0.8.1-1 [17.0 kB]
Get:21 http://deb.debian.org/debian bookworm/main arm64 qttranslations5-l10n all 5.15.8-2 [1,834 kB]
Fetched 4,164 kB in 3s (1,366 kB/s)              
Selecting previously unselected package qt5dxcb-plugin:arm64.
(Reading database ... 327889 files and directories currently installed.)
Preparing to unpack .../00-qt5dxcb-plugin_5.0.65-1+b3_arm64.deb ...
Unpacking qt5dxcb-plugin:arm64 (5.0.65-1+b3) ...
Selecting previously unselected package libdtkcommon.
Preparing to unpack .../01-libdtkcommon_5.5.23-2_arm64.deb ...
Unpacking libdtkcommon (5.5.23-2) ...
Selecting previously unselected package lshw.
Preparing to unpack .../02-lshw_02.19.git.2021.06.19.996aaad9c7-2+b1_arm64.deb ...
Unpacking lshw (02.19.git.2021.06.19.996aaad9c7-2+b1) ...
Selecting previously unselected package libgsettings-qt1:arm64.
Preparing to unpack .../03-libgsettings-qt1_0.2-5_arm64.deb ...
Unpacking libgsettings-qt1:arm64 (0.2-5) ...
Selecting previously unselected package libdtkcore5:arm64.
Preparing to unpack .../04-libdtkcore5_5.5.33-1+b3_arm64.deb ...
Unpacking libdtkcore5:arm64 (5.5.33-1+b3) ...
Selecting previously unselected package libdtkgui5:arm64.
Preparing to unpack .../05-libdtkgui5_5.5.25-1+b3_arm64.deb ...
Unpacking libdtkgui5:arm64 (5.5.25-1+b3) ...
Selecting previously unselected package libdtkwidget5:arm64.
Preparing to unpack .../06-libdtkwidget5_5.5.48-1+b3_arm64.deb ...
Unpacking libdtkwidget5:arm64 (5.5.48-1+b3) ...
Selecting previously unselected package libencode-locale-perl.
Preparing to unpack .../07-libencode-locale-perl_1.05-3_all.deb ...
Unpacking libencode-locale-perl (1.05-3) ...
Selecting previously unselected package libipc-system-simple-perl.
Preparing to unpack .../08-libipc-system-simple-perl_1.30-2_all.deb ...
Unpacking libipc-system-simple-perl (1.30-2) ...
Selecting previously unselected package libfile-basedir-perl.
Preparing to unpack .../09-libfile-basedir-perl_0.09-2_all.deb ...
Unpacking libfile-basedir-perl (0.09-2) ...
Selecting previously unselected package libregexp-ipv6-perl.
Preparing to unpack .../10-libregexp-ipv6-perl_0.03-3_all.deb ...
Unpacking libregexp-ipv6-perl (0.03-3) ...
Selecting previously unselected package liburi-perl.
Preparing to unpack .../11-liburi-perl_5.17-1_all.deb ...
Unpacking liburi-perl (5.17-1) ...
Selecting previously unselected package libfile-desktopentry-perl.
Preparing to unpack .../12-libfile-desktopentry-perl_0.22-3_all.deb ...
Unpacking libfile-desktopentry-perl (0.22-3) ...
Selecting previously unselected package libfile-mimeinfo-perl.
Preparing to unpack .../13-libfile-mimeinfo-perl_0.33-1_all.deb ...
Unpacking libfile-mimeinfo-perl (0.33-1) ...
Selecting previously unselected package libqt5xdgiconloader3:arm64.
Preparing to unpack .../14-libqt5xdgiconloader3_3.10.0-2+b2_arm64.deb ...
Unpacking libqt5xdgiconloader3:arm64 (3.10.0-2+b2) ...
Selecting previously unselected package libqt5xdg3:arm64.
Preparing to unpack .../15-libqt5xdg3_3.10.0-2+b2_arm64.deb ...
Unpacking libqt5xdg3:arm64 (3.10.0-2+b2) ...
Selecting previously unselected package dde-qt5integration:arm64.
Preparing to unpack .../16-dde-qt5integration_5.5.23-1+b4_arm64.deb ...
Unpacking dde-qt5integration:arm64 (5.5.23-1+b4) ...
Selecting previously unselected package libio-stringy-perl.
Preparing to unpack .../17-libio-stringy-perl_2.111-3_all.deb ...
Unpacking libio-stringy-perl (2.111-3) ...
Selecting previously unselected package libnotify-bin.
Preparing to unpack .../18-libnotify-bin_0.8.1-1_arm64.deb ...
Unpacking libnotify-bin (0.8.1-1) ...
Selecting previously unselected package qttranslations5-l10n.
Preparing to unpack .../19-qttranslations5-l10n_5.15.8-2_all.deb ...
Unpacking qttranslations5-l10n (5.15.8-2) ...
Selecting previously unselected package spark-store.
Preparing to unpack .../20-spark-store_4.3.0_arm64.deb ...
不再检测网络
Unpacking spark-store (4.3.0) ...
Setting up libio-stringy-perl (2.111-3) ...
Setting up libencode-locale-perl (1.05-3) ...
Setting up libgsettings-qt1:arm64 (0.2-5) ...
Setting up lshw (02.19.git.2021.06.19.996aaad9c7-2+b1) ...
Setting up libqt5xdgiconloader3:arm64 (3.10.0-2+b2) ...
Setting up qt5dxcb-plugin:arm64 (5.0.65-1+b3) ...
Setting up qttranslations5-l10n (5.15.8-2) ...
Setting up libipc-system-simple-perl (1.30-2) ...
Setting up libdtkcommon (5.5.23-2) ...
Setting up libnotify-bin (0.8.1-1) ...
Setting up libregexp-ipv6-perl (0.03-3) ...
Setting up liburi-perl (5.17-1) ...
Setting up libfile-basedir-perl (0.09-2) ...
Setting up libfile-desktopentry-perl (0.22-3) ...
Setting up libfile-mimeinfo-perl (0.33-1) ...
Setting up libqt5xdg3:arm64 (3.10.0-2+b2) ...
Processing triggers for desktop-file-utils (0.26-1) ...
Processing triggers for hicolor-icon-theme (0.17-2) ...
Processing triggers for gnome-menus (3.36.0-1.1) ...
Processing triggers for libglib2.0-0:armhf (2.74.6-2+deb12u3) ...
Segmentation fault
Processing triggers for libglib2.0-0:arm64 (2.74.6-2+deb12u3) ...
Setting up libdtkcore5:arm64 (5.5.33-1+b3) ...
Processing triggers for libc-bin (2.36-9+rpt2+deb12u7) ...
Setting up libdtkgui5:arm64 (5.5.25-1+b3) ...
Processing triggers for man-db (2.11.2-2) ...
Setting up libdtkwidget5:arm64 (5.5.48-1+b3) ...
Processing triggers for mailcap (3.70+nmu1) ...
Setting up dde-qt5integration:arm64 (5.5.23-1+b4) ...
Setting up spark-store (4.3.0) ...
Will not enable armhf since 4271
Created symlink /etc/systemd/system/multi-user.target.wants/spark-update-notifier.service → /lib/systemd/system/spark-update-notifier.service.
Processing triggers for libc-bin (2.36-9+rpt2+deb12u7) ...
Scanning processes...                                                                                                                                                                                                                         
Scanning candidates...                                                                                                                                                                                                                        
Scanning processor microcode...                                                                                                                                                                                                               
Scanning linux images...                                                                                                                                                                                                                      

Running kernel seems to be up-to-date.

The processor microcode seems to be up-to-date.

No services need to be restarted.

No containers need to be restarted.

User sessions running outdated binaries:
 pi @ session #1: evince[2637768], geany[425900], lxterminal[55336], polkit-mate-aut[1605], rustdesk[1670], systemd-inhibit[1649]
 pi @ user manager service: systemd[1043]

No VM guests are running outdated hypervisor (qemu) binaries on this host.
N: Download is performed unsandboxed as root as file '/home/pi/Downloads/spark-store_4.3.0_arm64.deb' couldn't be accessed by user '_apt'. - pkgAcquire::Run (13: Permission denied)
pi@raspberrypi:~ $ spark-store
AppConfigLocation not existed, creating...
System Wayland enabled: true Spark Wayland enabled: true
Enable HiDPI Support.
2024-08-19, 14:02:53.899 [Debug  ] [  ] Spark Store has been updated!
[571859:1:0819/140256.380844:FATAL:page_allocator_internals_posix.h(169)] Check failed: . : Invalid argument (22)
[571860:1:0819/140256.406663:FATAL:page_allocator_internals_posix.h(169)] Check failed: . : Invalid argument (22)
2024-08-19, 14:02:56.457 [Debug  ] [  ] "https://cdn.d.store.deepinos.org.cn/"
2024-08-19, 14:02:56.498 [Warning] [  ] QLayout: Attempting to add QLayout "" to Dtk::Widget::DTitlebar "titlebar", which already has a layout
2024-08-19, 14:02:56.515 [Debug  ] [  ] ""
2024-08-19, 14:02:56.515 [Debug  ] [  ] 
2024-08-19, 14:02:56.588 [Info   ] [  ] color-scheme: 0, fetching themeType according to QPalette::Window
2024-08-19, 14:02:56.858 [Warning] [dplatformhandle.cpp  Dtk::Gui::DPlatformHandle::setWindowBlurAreaByWM 776] setWindowBlurAreaByWM is not support
[571899:1:0819/140257.301873:FATAL:page_allocator_internals_posix.h(169)] Check failed: . : Invalid argument (22)
[571900:1:0819/140257.322786:FATAL:page_allocator_internals_posix.h(169)] Check failed: . : Invalid argument (22)
[571953:1:0819/140302.626090:FATAL:page_allocator_internals_posix.h(169)] Check failed: . : Invalid argument (22)
2024-08-19, 14:03:02.626 [Debug  ] [  ] "office"
2024-08-19, 14:03:02.626 [Debug  ] [  ] 
[571976:1:0819/140305.260119:FATAL:page_allocator_internals_posix.h(169)] Check failed: . : Invalid argument (22)
[571977:1:0819/140305.516319:FATAL:page_allocator_internals_posix.h(169)] Check failed: . : Invalid argument (22)
2024-08-19, 14:03:57.101 [Debug  ] [  ] Upload failed with error:  "Socket operation timed out"

System information:

• Raspberry Pi 5
• Raspberry Pi OS Bookworm 64-bit
• Wayland

[shenmo7192]

Hi. Glad to know that we have international users. We use github as mirror so maybe late to respond

[shenmo7192]

I noticed that you are using wayland, and that maybe the issue. Is that convinent for you to switch to X11 to test it?

@uniartisan Please check this.

---

Also you can try use aptss command to directly install apps without our qt client. It does not very reliable and we are trying to rewrite it in other language.

[shenmo7192]

Also maybe the CDN problem. You can try switch lines too

Here

[shenmo7192]

We made some breaking change during recent days for we are continuously being attacked. Please make sure your version is higher than 4.3.0(The newest is 4.3.0-fix3). Any client older than that may act abnormally

---

Also, please show us your ipv4 address for our server group to check if your IP is banned from our WAF