% Title = "The Stellar Consensus Protocol (SCP)" % abbrev = "scp" % category = "exp" % docName = "draft-mazieres-dinrg-scp-02" % ipr= "trust200902" % area = "Internet" % workgroup = "" % keyword = ["consensus"] % % date = 2018-05-23T00:00:00Z % % [[author]] % initials="N." % surname="Barry" % fullname="Nicolas Barry" % #role="editor" % organization = "Stellar Development Foundation" % [author.address] % email = "nicolas@stellar.org" % [author.address.postal] % street = "170 Capp St., Suite A" % city = "San Francisco, CA" % code = "94110" % country = "US" % % [[author]] % initials="G." % surname="Losa" % fullname="Giuliano Losa" % #role="editor" % organization = "UCLA" % [author.address] % email = "giuliano@cs.ucla.edu" % [author.address.postal] % street = "3753 Keystone Avenue #10" % city = "Los Angeles, CA" % code = "90034" % country = "US" % % [[author]] % initials="D." % surname="Mazieres" % fullname="David Mazieres" % #role="editor" % organization = "Stanford University" % [author.address] % email = "dm@uun.org" % [author.address.postal] % street = "353 Serra Mall, Room 290" % city = "Stanford, CA" % code = "94305" % country = "US" % % [[author]] % initials="J." % surname="McCaleb" % fullname="Jed McCaleb" % #role="editor" % organization = "Stellar Development Foundation" % [author.address] % email = "jed@stellar.org" % [author.address.postal] % street = "170 Capp St., Suite A" % city = "San Francisco, CA" % code = "94110" % country = "US" % % [[author]] % initials="S." % surname="Polu" % fullname="Stanislas Polu" % #role="editor" % organization = "Stripe Inc." % [author.address] % email = "stan@stripe.com" % [author.address.postal] % street = "185 Berry Street, Suite 550" % city = "San Francisco, CA" % code = "94107" % country = "US"

.# Abstract

SCP is an open Byzantine agreement protocol resistant to Sybil attacks. It allows Internet infrastructure stakeholders to reach agreement on a series of values without unanimous agreement on what constitutes the set of important stakeholders. A big differentiator from other Byzantine agreement protocols is that, in SCP, nodes determine the composition of quorums in a decentralized way: each node selects sets of nodes it considers large or important enough to speak for the whole network, and a quorum must contain such a set for each of its members.

{mainmatter}

Introduction

Various aspects of Internet infrastructure depend on irreversible and transparent updates to data sets such as authenticated mappings [cite Li-Man-Watson draft]. Examples include public key certificates and revocations, transparency logs [@?RFC6962], preload lists for HSTS [@?RFC6797] and HPKP [@?RFC7469], and IP address delegation [@?I-D.paillisse-sidrops-blockchain].

The Stellar Consensus Protocol (SCP) specified in this draft allows Internet infrastructure stakeholders to collaborate in applying irreversible transactions to public state. SCP is an open Byzantine agreement protocol that resists Sybil attacks by allowing individual parties to specify minimum quorum memberships in terms of specific trusted peers. Each participant chooses combinations of peers on which to depend such that these combinations can be trusted in aggregate. The protocol guarantees safety so long as these dependency sets transitively overlap and contain sufficiently many honest nodes correctly obeying the protocol.

Though bad configurations are theoretically possible, several analogies provide an intuition for why transitive dependencies overlap in practice. For example, given multiple entirely disjoint Internet-protocol networks, people would have no trouble agreeing on the fact that the network containing the world's top web sites is the Internet. Such a consensus can hold even without unanimous agreement on what constitute the world's top web sites. Similarly, if network operators listed all the ASes from whom they would consider peering or transit worthwhile, the transitive closures of these sets would contain significant overlap, even without unanimous agreement on the "tier-1 ISP" designation. Finally, while different browsers and operating systems have slightly different lists of valid certificate authorities, there is significant overlap in the sets, so that a hypothetical system requiring validation from "all CAs" would be unlikely to diverge.

A more detailed abstract description of SCP and its rationale, including an English-language proof of safety, is available in [@?SCP]. In particular, that reference shows that a necessary property for safety, termed quorum intersection despite ill-behaved nodes, is sufficient to guarantee safety under SCP, making SCP optimally safe against Byzantine node failure for any given configuration.

This document specifies the end-system logic and wire format of the messages in SCP.

The Model

This section describes the configuration and input/output values of the consensus protocol.

Configuration

Each participant or node in the SCP protocol has a digital signature key and is named by the corresponding public key, which we term a NodeID.

Each node also selects one or more sets of nodes (each of which includes itself) called quorum slices. A quorum slice represents a large or important enough set of peers that the node selecting the quorum slice believes the slice collectively speaks for the whole network.

A quorum is a non-empty set of nodes containing at least one quorum slice of each of its members. For instance, suppose v1 has the single quorum slice {v1, v2, v3}, while each of v2, v3, and v4 has the single quorum slice {v2, v3, v4}. In this case, {v2, v3, v4} is a quorum because it contains a slice for each member. On the other hand {v1, v2, v3} is not a quorum, because it does not contain a quorum slice for v2 or v3. The smallest quorum including v1 in this example is the set of all nodes {v1, v2, v3, v4}.

Unlike traditional Byzantine agreement protocols, nodes in SCP only care about quorums to which they belong themselves (and hence that contain at least one of their quorum slices). Intuitively, this is what protects nodes from Sybil attacks. In the example above, if v3 deviates from the protocol, maliciously inventing 96 Sybils v5, v6, ..., v100, the honest nodes' quorums will all still include one another, ensuring that v1, v2, and v4 continue to agree on output values.

Every message in the SCP protocol specifies the sender's quorum slices. Hence, by collecting messages, a node dynamically learns what constitutes a quorum and can decide when a particular message has been sent by a quorum to which it belongs. (Again, nodes do not care about quorums to which they do not belong themselves.)

Input and output

SCP produces a series of output values for consecutively numbered slots. At the start of a slot, higher-layer software on each node supplies a candidate input value. SCP's goal is to ensure that non-faulty nodes agree on one or a combination of nodes' input values for the slot's output. 5 seconds after completing one slot, the protocol runs again for the next slot.

A value typically encodes a set of actions to apply to a replicated state machine. During the pause between slots, nodes accumulate the next set of actions, thus amortizing the cost of consensus over arbitrarily many individual state machine operations.

In practice, only one or a small number of nodes' input values actually affect the output value for any given slot. As discussed in (#nomination), which nodes' input values to use depends on a cryptographic hash of the slot number, output history, and node public keys. A node's chances of affecting the output value depend on how often it appears in other nodes' quorum slices.

From SCP's perspective, values are just opaque byte arrays whose interpretation is left to higher-layer software. However, SCP requires a validity function (to check whether a value is valid) and a combining function that reduces multiple candidate values into a single composite value. When nodes nominate multiple values for a slot, SCP nodes invoke this function to converge on a single composite value. By way of example, in an application where values consist of sets of transactions, the combining function could take the union of transaction sets. Alternatively, if values represent a timestamp and a set of transactions, the combining function might pair the highest nominated timestamp with the transaction set that has the highest hash value.

Protocol

The protocol consists of exchanging digitally-signed messages bound to nodes' quorum slices. The format of all messages is specified using XDR [@!RFC4506]. In addition to quorum slices, messages compactly convey votes on sets of conceptual statements. The core technique of voting with quorum slices is termed federated voting. We describe federated voting next, then detail protocol messages in the subsections that follow.

Federated voting

Federated voting is a process through which nodes confirm statements. Not every attempt at federated voting may succeed--an attempt to vote on some statement a may get stuck, with the result that nodes can confirm neither a nor its negation !a. However, when a node succeeds in confirming a statement a, federated voting guarantees two things:

No two well-behaved nodes will confirm contradictory statements in any configuration and failure scenario in which any protocol can guarantee safety for the two nodes (i.e., quorum intersection for the two nodes holds despite ill-behaved nodes).
If a node that is guaranteed safety by #1 confirms a statement a, and that node is a member of one or more quorums consisting entirely of well-behaved nodes, then eventually every member of every such quorum will also confirm a.

Intuitively, these conditions are key to ensuring agreement among nodes as well as a weak form of liveness (the non-blocking property [@?building-blocks]) that is compatible with the FLP impossibility result [@?FLP].

As a node v collects signed copies of a federated voting message m from peers, two thresholds trigger state transitions in v depending on the message. We define these thresholds as follows:

quorum threshold: When every member of a quorum to which v belongs (including v itself) has issued message m
blocking threshold: When at least one member of each of v's quorum slices (a set that does not necessarily include v itself) has issued message m

Each node v can send several types of message with respect to a statement a during federated voting:

vote a states that a is a valid statement and constitutes a promise by v not to vote for any contradictory message, such as !a.
accept a says that nodes may or may not come to agree on a, but if they don't, then the system has experienced a catastrophic set of Byzantine failures to the point that no quorum containing v consists entirely of correct nodes. (Nonetheless, accepting a is not sufficient to act on it, as doing so could violate agreement, which is worse than merely getting stuck from lack of a correct quorum.)
vote-or-accept a is the disjunction of the above two messages. A node implicitly sends such a message if it sends either vote a or accept a. Where it is inconvenient and unnecessary to differentiate between vote and accept, a node can explicitly send a vote-or-accept message.
confirm a indicates that accept a has reached quorum threshold at the sender. This message is interpreted the same as accept a, but allows recipients to optimize their quorum checks by ignoring the sender's quorum slices, as the sender asserts it has already checked them.

(#fig:voting) illustrates the federated voting process. A node v votes for a valid statement a that doesn't contradict statements in past vote or accept messages sent by v. When the vote message reaches quorum threshold, the node accepts a. In fact, v accepts a if the vote-or-accept message reaches quorum threshold, as some nodes may accept a without first voting for it. Specifically, a node that cannot vote for a because it has voted for a's negation !a still accepts a when the message accept a reaches blocking threshold (meaning assertions about !a have no hope of reaching quorum threshold barring catastrophic Byzantine failure).

If and when the message accept a reaches quorum threshold, then v has confirmed a and the federated vote has succeeded. In effect, the accept messages constitute a second vote on the fact that the initial vote messages succeeded. Once v enters the confirmed state, it may issue a confirm a message to help other nodes confirm a more efficiently by pruning their quorum search at v.

{#fig:voting} "vote-or-accept a" "accept a" reaches reaches quorum threshold quorum threshold +-----------------+ +-----------------+ | | | | | V | V +-----------+ +-----------+ +-----------+ a is +---->| voted a | |accepted a | |confirmed a| valid | +-----------+ +-----------+ +-----------+ | | ^ +-----------+ | | "accept a" reaches |uncommitted|------+-----------------+ blocking threshold +-----------+ | | | | +-----------+ +---->| voted !a | +-----------+ Figure: Federated voting process

Basic types

SCP employs 32- and 64-bit integers, as defined below.

typedef unsigned int uint32;
typedef int int32;
typedef unsigned hyper uint64;
typedef hyper int64;

SCP uses the SHA-256 cryptograhpic hash function [@!RFC6234], and represents hash values as a simple array of 32 bytes.

typedef opaque Hash[32];

SCP employes the Ed25519 digital signature algorithm [@!RFC8032]. For cryptographic agility, however, public keys are represented as a union type that can later be compatibly extended with other key types.

typedef opaque uint256[32];

enum PublicKeyType
{
    PUBLIC_KEY_TYPE_ED25519 = 0
};

union PublicKey switch (PublicKeyType type)
{
case PUBLIC_KEY_TYPE_ED25519:
    uint256 ed25519;
};

// variable size as the size depends on the signature scheme used
typedef opaque Signature<64>;

Nodes are public keys, while values are simply opaque arrays of byes.

typedef PublicKey NodeID;

typedef opaque Value<>;

Quorum slices

Theoretically a quorum slice can be an arbitrary set of sets of nodes. However, arbitrary predicates on sets cannot be encoded concisely. Instead we specify quorum slices as any set of k-of-n members, where each of the n members can either be an individual node ID, or, recursively, another k-of-n set.

// supports things like: A,B,C,(D,E,F),(G,H,(I,J,K,L))
// only allows 2 levels of nesting
struct SCPQuorumSet
{
    uint32 threshold;            // the k in k-of-n
    PublicKey validators<>;
    SCPQuorumSet1 innerSets<>;
};
struct SCPQuorumSet1
{
    uint32 threshold;            // the k in k-of-n
    PublicKey validators<>;
    SCPQuorumSet2 innerSets<>;
};
struct SCPQuorumSet2
{
    uint32 threshold;            // the k in k-of-n
    PublicKey validators<>;
};

Let k be the value of threshold and n the sum of the sizes of the validators and innerSets vectors in a message sent by some node v. A message m sent by v reaches quorum threshold at v when three things hold:

v itself has issued (digitally signed) the message,
The number of nodes in validators who have signed m plus the number innerSets that (recursively) meet this condition is at least k, and
These three conditions apply (recursively) at some combination of nodes sufficient for condition #2.

A message reaches blocking threshold at v when the number of validators making the statement plus (recursively) the number innerSets reaching blocking threshold exceeds n-k. (Blocking threshold depends only on the local node's quorum slices and hence does not require a recursive check on other nodes like step #3 above.)

As described in (#message-envelopes), every protocol message is paired with a cryptographic hash of the sender's SCPQuorumSet and digitally signed. Inner protocol messages described in the next few sections should be understood to be received in alongside such a quorum slice specification and digital signature.

Nomination

For each slot, the SCP protocol begins in a NOMINATION phase whose goal is to devise one or more candidate output values for the consensus protocol. Nodes send nomination messages that contain a monotonically growing set of values in the following format:

struct SCPNomination
{
    Value votes<>;      // X
    Value accepted<>;   // Y
};

The votes and accepted sets are disjoint; any value that is eligible for for both sets is placed only in the accepted set.

votes consists of candidate values nominated by the sender. Each node progresses through a series of nomination rounds in which it may increase the set of values in its own votes field by adding the contents of the votes and accepted fields of SCPNomination messages received from a growing set of peers. In round n of slot i, each node determines an additional peer whose nominated values it should incorporate in its own SCPNomination message as follows:

Let Gi(m) = SHA-256(i || m), where || denotes the concatenation of serialized XDR values. Treat the output of Gi as a 256-bit binary number in big-endian format.
For each peer v, define weight(v) as the faction of quorum slices containing v.
Define the set of nodes neighbors(n) as the set of nodes v for which Gi(1 || n || v) < 2^{256} * weight(v), where 1 and n are both 32-bit XDR int values.
Define priority(n, v) as Gi(2 || n || v), where 2 and n are both 32-bit XDR int values.

For each round n until nomination has finished (see below), a node starts echoing the available peer v with the highest value of priority(n, v) from among the nodes in neighbors(n). Echoing a peer v means merging any valid values from v's votes and accepted sets to one's own votes set. However, values rejected by the higher-layer application's validity function are ignored and not merged.

The validity function must not depend on state that can permanently differ across nodes. By way of example, it is okay to reject values that are syntactically ill-formed, that are semantically incompatible with the previous slot's value, that contain invalid digital signatures, that contain timestamps in the future, or that specify upgrades to unknown versions of the protocol. By contrast, the application cannot reject values that are incompatible with the results of a DNS query or some dynamically retrieved TLS certificate, as different nodes could see different results when doing such queries.

Nodes must not send an SCPNomination message until at least one of the votes or accepted fields is non-empty. When these fields are both empty, a node that has the highest priority among its neighbors in the current round (and hence should be echoing its own votes) adds the higher-layer software's input value to its votes field. Nodes that do not have the highest priority wait to hear SCPNomination messages from the nodes whose nominations they are echoing.

If a particular valid value x reaches quorum threshold in the messages sent by peers (meaning that every node in a quorum contains x either in the votes or the accepted field), then the node at which this happens moves x from its votes field to its accepted field and broadcasts a new SCPNomination message. Similarly, if x reaches blocking threshold in a node's peers' accepted field (meaning every one of a node's quorum slices contains at least one node with x in its accepted field), then the node adds x to its own accepted field (removing it from votes if applicable). These two cases correspond to the two conditions for entering the accepted state in (#fig:voting).

A node finishes the NOMINATION phase whenever any value x reaches quorum threshold in the accepted fields. Following the terminology of (#federated-voting), this condition corresponds to when the node confirms x as nominated. A node that has finished the NOMINATION phase stops adding new values to its votes set. However, the node continues adding new values to accepted as appropriate. Doing so may lead to more values becoming confirmed nominated in the background.

Round n lasts for 2+n seconds, after which, if the NOMINATION phase has not finished, a node proceeds to round n+1. Note that a node continues to echo votes from the highest priority neighbor in prior rounds as well as the current round. In particular, a node continues expanding its votes field with values nominated by highest priority neighbors from prior rounds even when those values were added after the end of the round.

XXX - expand votes with only the 10 values with lowest SHA-256 hash in any given round to avoid blowing out the message size?

Ballots

After completing the NOMINATION phase (meaning after at least one candidate value is confirmed nominated), a node moves through three phases of balloting: PREPARE, COMMIT, and EXTERNALIZE. Balloting employs federated voting to chose between commit and abort statements for ballots. A ballot is a pair, consisting of a counter and candidate value:

// Structure representing ballot <n, x>
struct SCPBallot
{
    uint32 counter; // n
    Value value;    // x
};

We use the notation <n, x> to represent a ballot with counter == n and value == x.

Ballots are totally ordered with counter more significant than value. Hence, we write b1 < b2 to mean that either b1.counter < b2.counter or b1.counter == b2.counter && b1.value < b2.value. (Values are compared lexicographically as a strings of unsigned octets.)

The protocol moves through federated voting on successively higher ballots until nodes confirm commit b for some ballot b, at which point consensus terminates and outputs b.value for the slot. To ensure that only one value can be chosen for a slot and that the protocol cannot get stuck if individual ballots get stuck, there are two restrictions on voting:

A node cannot vote for both commit b and abort b on the same ballot (the two outcomes are contradictory), and
A node may not vote for commit b for any ballot b unless it has confirmed abort for every lesser ballot with a different value.

The second condition requires voting to abort large numbers of ballots before voting to commit a ballot b. We call this preparing ballot b, and introduce the following notation for the associated set of abort statements.

prepare(b) encodes an abort statement for every ballot less than b containing a value other than b.value, i.e., prepare(b) = { abort b1 | b1 < b AND b1.value != b.value }.
vote prepare(b) stands for a set of vote messages for every abort statement in prepare(b).
Similarly, accept prepare(b), vote-or-accept prepare(b), and confirm prepare(b) encode sets of accept, vote-or-accept, and confirm messages for every abort statement in prepare(b).

Using this terminology, a node must confirm prepare(b) before issuing a vote message for the statement commit b.

Prepare messages

The first phase of balloting is the PREPARE phase. During this phase, nodes send the following message:

struct SCPPrepare
{
    SCPBallot ballot;         // b
    SCPBallot *prepared;      // p
    SCPBallot *preparedPrime; // p'
    uint32 hCounter;          // h.counter or 0 if h == NULL
    uint32 cCounter;          // c.counter or 0 if c == NULL
};

This message compactly conveys the following (conceptual) federated voting messages:

vote-or-accept prepare(ballot)
If prepared != NULL: accept prepare(prepared)
If preparedPrime != NULL: accept prepare(preparedPrime)
If hCounter != 0: confirm prepare(<hCounter, ballot.value>)
If cCounter != 0: vote commit <n, ballot.value> for every cCounter <= n <= hCounter

Note that to be valid, an SCPPrepare message must satisfy preparedPrime < prepared <= ballot (for any non-NULL prepared and preparedPrime), and cCounter <= hCounter <= ballot.counter.

Based on the federated vote messages received, each node keeps track of what ballots have been accepted and confirmed prepared. It uses these ballots to set the following fields of its own SCPPrepare messages as follows.

ballot : The current ballot that a node is attempting to prepare and commit. The rules for setting each of the two fields are detailed below. Note that the value is updated when and only when counter changes.

ballot.counter : The counter is set according to the following rules:

* Upon entering the PREPARE phase, the `counter` field is
  initialized to 1.

* When a node sees messages from a quorum to which it belongs such
  that each message's `ballot.counter` is greater than or equal to
  the local `ballot.counter`, the node arms a timer to fire in a
  number of seconds equal to its `ballot.counter + 1` (so the
  timeout lengthens linearly as the counter increases).  Note that
  for the purposes of determining whether a quorum has a
  particular `ballot.counter`, a node also considers `ballot`
  fields in `SCPCommit` and considers `SCPExternalize` messages to
  contain an implicit `ballot.counter` of `infinity`.

* If the timer fires, a node increments the ballot counter by 1.

* If nodes forming a blocking threshold all have `ballot.counter`
  values greater than the local `ballot.counter`, then the local
  node immediately cancels any pending timer, increases
  `ballot.counter` to the lowest value such that this is no longer
  the case, and if appropriate according to the rules above arms a
  new timer.  Note that the blocking threshold may include ballots
  from `SCPCommit` messages as well as `SCPExternalize` messages,
  which implicitly have an infinite ballot counter.

* **Exception**: To avoid exhausting `ballot.counter`, its value
  must always be less then 1,000 plus the number of seconds a node
  has been running SCP on the current slot.  Should any of the
  above rules require increasing the counter beyond this value, a
  node either increases `ballot.counter` to the maximum
  permissible value, or, if it is already at this maximum, waits
  up to one second before increasing the value.

ballot.value : Each time the ballot counter is changed, the value is also recomputed as follows: If any ballot has been confirmed prepared, then ballot.value is taken to to be h.value for the highest confirmed prepared ballot h. Otherwise (if no such h exists), the value is taken as the output of the deterministic combining function applied to all confirmed nominated values. Note that the set of confirmed nominated values may continue to grow in the background during balloting, so ballot.value may change even if no ballots are confirmed prepared.

prepared : The highest accepted prepared ballot not exceeding the ballot field, or NULL if no ballot has been accepted prepared. (Note the only condition in which the highest accepted prepared ballot might exceed ballot is the corner case in which a higher counter reaches blocking threshold but ballot.counter is at its temporary maximum.)

preparedPrime : The highest accepted prepared ballot such that preparedPrime < prepared and preparedPrime.value != prepared.value, or NULL if there is no such ballot. Note that together, prepared and preparedPrime concisely encode all abort statements (below ballot) that the sender has accepted.

hCounter : If h is the highest confirmed prepared ballot and h.value == ballot.value, then this field is set to h.counter. Otherwise, if no ballot is confirmed prepared or if h.value != ballot.value, then this field is 0. Note that by the rules above, if h exists, then ballot.value will be set to h.value the next time ballot is updated.

cCounter : The value cCounter is maintained based on an internally-maintained commit ballot c, initially NULL. cCounter is 0 while c is NULL and is c.counter otherwise. c is updated as follows:

* If either `(prepared > c && prepared.value != c.value)` or
  `(preparedPrime > c && preparedPrime.value != c.value)`, then
  reset `c = NULL`.

*  If `c == NULL` and `hCounter == ballot.counter` (meaning
   `ballot` is confirmed prepared), then set `c` to `ballot`.

A node leaves the PREPARE phase and proceeds to the COMMIT phase when there is some ballot b for which the node confirms prepare(b) and accepts commit b. (If nodes never changed quorum slice mid-protocol, it would suffice to accept commit b. Also waiting to confirm prepare(b) makes it easier to recover from liveness failures by removing Byzantine faulty nodes from quorum slices.)

Commit messages

In the COMMIT phase, a node has accepted commit b for some ballot b, and must confirm that statement to act on the value in b.counter. A node sends the following message in this phase:

struct SCPCommit
{
    SCPBallot ballot;       // b
    uint32 preparedCounter; // prepared.counter
    uint32 hCounter;        // h.counter
    uint32 cCounter;        // c.counter
};

The message conveys the following federated vote messages, where where infinity is 2^{32} (a value greater than any ballot counter representable in serialized form):

accept commit <n, ballot.value> for every cCounter <= n <= hCounter
vote-or-accept prepare(<infinity, ballot.value>)
accept prepare(<preparedCounter, ballot.value>)
confirm prepare(<hCounter, ballot.value>)
vote commit <n, ballot.value> for every n >= cCounter

A node computes the fields in the SCPCommit messages it sends as follows:

ballot : This field is maintained identically to how it is maintained in the PREPARE phase, though ballot.value can no longer change, only ballot.counter. Note that the value ballot.counter does not figure in any of the federated voting messages. The purpose of continuing to update and send this field is to assist other nodes still in the PREPARE phase in synchronizing their counters.

preparedCounter : This field is the counter of the highest accepted prepared ballot--maintained identically to the prepared field in the PREPARE phase. Since the value field will always be the same as ballot, only the counter is sent in the COMMIT phase.

cCounter : The counter of the lowest ballot c for which the node has accepted commit c. (No value is included in messages since c.value == ballot.value.)

hCounter : The counter of the highest ballot h for which the node has accepted commit c. (No value is included in messages since h.value == ballot.value.)

As soon as a node confirms commit b for any ballot b, it moves to the EXTERNALIZE phase.

Externalize messages

A node enters the EXTERNALIZE phase when it confirms commit b for any ballot b. As soon as this happens, SCP outputs b.value as the value of the current slot. In order to help other nodes achieve consensus on the slot more quickly, a node reaching this phase also sends the following message:

struct SCPExternalize
{
    SCPBallot commit;         // c
    uint32 hCounter;          // h.counter
};

An SCPExternalize message conveys the following federated voting messages:

accept commit <n, commit.value> for every n >= commit.counter
confirm commit <n, commit.value> for every commit.counter <= n <= hCounter
confirm prepare(<infinity, commit.value>)

The fields are set as follows:

commit : The lowest confirmed committed ballot.

hCounter : The counter of the highest confirmed committed ballot.

Message envelopes

In order to provide full context for each signed message, all signed messages are part of an SCPStatement union type that includes the slotIndex naming the slot to which the message applies, as well as the type of the message. A signed message and its signature are packed together in an SCPEnvelope structure.

enum SCPStatementType
{
    SCP_ST_PREPARE = 0,
    SCP_ST_COMMIT = 1,
    SCP_ST_EXTERNALIZE = 2,
    SCP_ST_NOMINATE = 3
};

struct SCPStatement
{
    NodeID nodeID;      // v (node signing message)
    uint64 slotIndex;   // i
    Hash quorumSetHash; // hash of serialized SCPQuorumSet

    union switch (SCPStatementType type)
    {
    case SCP_ST_PREPARE:
        SCPPrepare prepare;
    case SCP_ST_COMMIT:
        SCPCommit commit;
    case SCP_ST_EXTERNALIZE:
        SCPExternalize externalize;
    case SCP_ST_NOMINATE:
        SCPNomination nominate;
    }
    pledges;
};

struct SCPEnvelope
{
    SCPStatement statement;
    Signature signature;
};

Security considerations

If nodes do not pick quorum slices well, the protocol will not be safe.

Acknowledgments

The Stellar development foundation supported development of the protocol and produced the first production deployment of SCP. The IRTF DIN group including Dirk Kutscher, Sydney Li, Colin Man, Melinda Shore, and Jean-Luc Watson helped with the framing and motivation for this specification. We also thank Bob Glickstein for feedback on this draft.

{backmatter}

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

draft-mazieres-dinrg-scp-02.md

draft-mazieres-dinrg-scp-02.md

Introduction

The Model

Configuration

Input and output

Protocol

Federated voting

Basic types

Quorum slices

Nomination

Ballots

Prepare messages

Commit messages

Externalize messages

Message envelopes

Security considerations

Acknowledgments

Files

draft-mazieres-dinrg-scp-02.md

Latest commit

History

draft-mazieres-dinrg-scp-02.md

File metadata and controls

Introduction

The Model

Configuration

Input and output

Protocol

Federated voting

Basic types

Quorum slices

Nomination

Ballots

Prepare messages

Commit messages

Externalize messages

Message envelopes

Security considerations

Acknowledgments