local.cfg.EXAMPLE

# local.cfg for DSpace
#
# Any configurations added to this file will automatically OVERRIDE configurations
# of the same name in any of the DSpace *.cfg files.
#
# While some sample configurations are provided below, you may also copy
# ANY configuration from ANY DSpace *.cfg file into this "local.cfg" to OVERRIDE
# its default value. This includes any of these files:
#    * [dspace]/config/dspace.cfg
#    * Or any configuration file that is loaded into 'dspace.cfg'
#     (see "include =" settings near the end of dspace.cfg for full list)
#
# You may also specify additional configuration files to load by simply adding:
#
# include = [file-path]
#
# The [file-path] should be relative to the [dspace]/config/ folder, e.g.
# include = modules/authentication-ldap.cfg
#
# Any commented out settings in this file are simply ignored. A configuration
# will only override another configuration if it has the EXACT SAME key/name.
# For example, including "dspace.dir" in this local.cfg will override the
# default value of "dspace.dir" in the dspace.cfg file.
# Similarly, including "oai.solr.url" in this local.cfg will override the
# default value of "oai.solr.url" in the modules/oai.cfg file.
#

##########################
# SERVER CONFIGURATION   #
##########################

# DSpace installation directory.
# This is the location where you want to install DSpace.
# Windows note: Please remember to use forward slashes for all paths (e.g. C:/dspace)
dspace.dir=/dspace

# DSpace host name - should match base URL.  Do not include port number
dspace.hostname = localhost

# DSpace base host URL.  Include port number etc.
dspace.baseUrl = http://localhost:8080

# The user interface you will be using for DSpace. Common usage is either xmlui or jspui
dspace.ui = xmlui

# Full link your end users will use to access DSpace. In most cases, this will be the baseurl followed by
# the context path to the UI you are using.
#
# Alternatively, you can use a url redirect or deploy the web application under the servlet container root.
# In this case, make sure to remove the /${dspace.ui} from the dspace.url property.
#dspace.url = ${dspace.baseUrl}/${dspace.ui}

# Name of the site
dspace.name = DSpace at My University

# Default language for metadata values
#default.language = en_US

# Solr server/webapp.
# DSpace uses Solr for all search/browse capability (and for usage statistics by default).
# The included 'solr' webapp MUST be deployed to Tomcat for DSpace to function.
# Usually it will be available via port 8080 and the 'solr' context path. But,
# But, you may need to modify this if you are running DSpace on a custom port, etc.
solr.server = http://localhost:8080/solr

##########################
# DATABASE CONFIGURATION #
##########################
# DSpace only supports two database types: PostgreSQL or Oracle

# URL for connecting to database
#    * Postgres template: jdbc:postgresql://localhost:5432/dspace
#    * Oracle template: jdbc:oracle:thin:@//localhost:1521/xe
db.url = jdbc:postgresql://localhost:5432/dspace

# JDBC Driver
#    * For Postgres: org.postgresql.Driver
#    * For Oracle:   oracle.jdbc.OracleDriver
db.driver = org.postgresql.Driver

# Database Dialect (for Hibernate)
#    * For Postgres: org.dspace.storage.rdbms.hibernate.postgres.DSpacePostgreSQL82Dialect
#    * For Oracle:   org.hibernate.dialect.Oracle10gDialect
db.dialect = org.dspace.storage.rdbms.hibernate.postgres.DSpacePostgreSQL82Dialect

# Database username and password
db.username = dspace
db.password = dspace

# Database Schema name
#    * For Postgres, this is often "public" (default schema)
#    * For Oracle, schema is equivalent to the username of your database account,
#      so this may be set to ${db.username} in most scenarios.
db.schema = public

## Connection pool parameters

# Maximum number of DB connections in pool (default = 30)
#db.maxconnections = 30

# Maximum time to wait before giving up if all connections in pool are busy (milliseconds)
# (default = 5000ms or 5 seconds)
#db.maxwait = 5000

# Maximum number of idle connections in pool (-1 = unlimited)
# (default = -1, unlimited)
#db.maxidle = -1


#######################
# EMAIL CONFIGURATION #
#######################

# SMTP mail server (allows DSpace to send email notifications)
#mail.server = smtp.example.com

# SMTP mail server authentication username and password (if required)
#mail.server.username = myusername
#mail.server.password = mypassword

# SMTP mail server alternate port (defaults to 25)
#mail.server.port = 25

# From address for mail
# All mail from the DSpace site will use this 'from' address
#mail.from.address = dspace-noreply@myu.edu

# When feedback is submitted via the Feedback form, it is sent to this address
# Currently limited to one recipient!
#feedback.recipient = dspace-help@myu.edu

# General site administration (Webmaster) e-mail
#mail.admin = dspace-help@myu.edu

# Recipient for server errors and alerts (defaults to mail.admin)
#alert.recipient = ${mail.admin}

# Recipient for new user registration emails (defaults to unspecified)
#registration.notify =


########################
# HANDLE CONFIGURATION #
########################

# Canonical Handle URL prefix
#
# By default, DSpace is configured to use http://hdl.handle.net/
# as the canonical URL prefix when generating dc.identifier.uri
# during submission, and in the 'identifier' displayed in JSPUI
# item record pages.
#
# If you do not subscribe to CNRI's handle service, you can change this
# to match the persistent URL service you use, or you can force DSpace
# to use your site's URL, eg.
#handle.canonical.prefix = ${dspace.url}/handle/
#
# Note that this will not alter dc.identifer.uri metadata for existing
# items (only for subsequent submissions), but it will alter the URL 
# in JSPUI's 'identifier' message on item record pages for existing items.
#
# If omitted, the canonical URL prefix will be http://hdl.handle.net/
#handle.canonical.prefix = http://hdl.handle.net/

# CNRI Handle prefix
# (Defaults to a dummy/fake prefix of 123456789)
#handle.prefix = 123456789

#######################
# PROXY CONFIGURATION #
#######################
# uncomment and specify both properties if proxy server required
# proxy server for external http requests - use regular hostname without port number
#http.proxy.host =

# port number of proxy server
#http.proxy.port =

##########################
# AUTHENTICATION METHODS #
##########################
# EXAMPLE OVERRIDE:
# Override the default authentication method(s) defined in authentication.cfg
# by defining your own custom ordered list in this local.cfg.
#
# By default, all of these methods are commented out and DSpace will use the
# settings from authentication.cfg. But you may uncomment whichever plugins you
# need in order to change the default settings (or reorder them below).
#
# You may also copy default settings from the corresponding authentication-*.cfg
# configuration file and override them in this local.cfg.

# IP-based authentication/authorization. See authentication-ip.cfg for default configuration.
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod = org.dspace.authenticate.IPAuthentication

# LDAP authentication/authorization. See authentication-ldap.cfg for default configuration.
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod = org.dspace.authenticate.LDAPAuthentication

# Shibboleth authentication/authorization. See authentication-shibboleth.cfg for default configuration.
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod = org.dspace.authenticate.ShibAuthentication

# X.509 certificate authentication. See authentication-x509.cfg for default configuration.
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod = org.dspace.authenticate.X509Authentication

# Authentication by Password (encrypted in DSpace's database). See authentication-password.cfg for default configuration.
# Enabled by default in authentication.cfg
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod = org.dspace.authenticate.PasswordAuthentication