Skip to content

Latest commit

 

History

History
535 lines (359 loc) · 17.4 KB

build.md

File metadata and controls

535 lines (359 loc) · 17.4 KB

The Build System

Quick Start

Running

make

For the core, or

make PLATFORM=photon

for the Photon, in the top-level directory creates the bootloader and firmware binaries for your device, which are output to subdirectories of the build/target/ directory.

The top-level make is mainly a convenience to build bootloader and main projects. It supports these targets:

  • clean - force the next build to be a full rebuild, and
  • all (default), build the artefact.

The Recipes and Tips section describes the most frequently used commands. The remaining sections describe the build system in detail.

Build Components

The build system is organized as a number of build components. Each build component exists in it's own directory, with it's own makefiles and is responsible for build the artifacts that make up that component.

These are the primary components that produce executable code for a device:

  • bootloader
  • main (builds application firmware)
  • modules (builds system+application firmware)

The other projects are libraries used by these primary projects.

When building firmware, it's a good idea to build from main, since this offers additional features compared to building in the root directory, such as program-dfu to flash the produced firmware to the device.

Updating System Firmware (Photon)

When building locally on the photon from the develop branch, it is necessary to update the system firmware to the latest version:

  • put the Photon in DFU mode
  • cd modules
  • make PLATFORM=photon clean all program-dfu
  • You can optionally add APP/APPDIR/TEST values to the command above to build a specific application as you would when building main.

This will flash the latest system modules and the application to your device.

A key indicator that this is necessary is that the Photon doesn't run your application after flashing, due to a version mismatch. The onboard LED will breathe magenta to indicate Safe Mode when the application firmware isn't run.

Overview

Targets

  • all: the default target - builds the artefact for the project
  • clean: deletes all artefacts so the next build runs from a clean state
  • all program-dfu: (not bootloader) - builds and flashes the executable to a device via dfu
  • all st-flash: flashes the executable to a device via the st-link st-flash utility

Variables

make accepts variable definitions as part of the command invocation

  • v - verbose - set to 1 to trigger verbose output
  • PLATFORM/PLATFORM_ID: specifies the target platform, either as a name or as an ID.
  • PRODUCT_ID: specifies the target product ID.
  • PRODUCT_FIRMWARE_VERSION: specifies the firmware version that is sent to the cloud. Value from 0 to 65535.
  • GCC_PREFIX: a prefix added to the ARM toolchain. Allows custom locations to be specified if the ARM tools are not in the path.

When building main or modules:

  • APP: builds the application stored in user/applications/$(APP). (The default is to build the application code in user/src
  • APPDIR: builds the application located in $(APPDIR). The directory specified should be outside of the firmware repo working directory, allowing 3rd party applications to be built. See USER_MAKEFILE.
  • APPLIBS: directories containing external firmware libraries. See External Libraries
  • TEST builds the test application stored in user/tests/$(TEST).
  • USER_MAKEFILE: when APPDIR is used this specifies the location of the makefile to include, relative to APPDIR. The default is build.mk.
  • DEBUG_BUILD described in debugging

When building main:

  • TARGET_NAME: sets the base name of the artefact file produced. E.g. setting TARGET_NAME=whereyou would produce the target named whereyou.bin The default is the value of APP.
  • TARGET_DIR: sets the directory where the target files are placed relative to the current directory.

Platform name/IDs

The Platform ID describes the target platform. If you are targeting the Spark Core, you can skip this section. A list of supported platform IDs are listed in [platform-id.mk]((../build/platform-id.mk). The most common are listed here:

Name PLATFORM_ID
core 0
gcc 3
photon 6
p1 8
electron 10

The platform is specified on the command line as

PLATFORM_ID=<id>

or as

PLATFORM=name

For example

make PLATFORM=photon

Would build the firmware for the Photon / P0.

To avoid repeatedly specifying the platform on the command line, it can be set as an environment variable.

Linux/OS X:

export PLATFORM=photon

Windows

set PLATFORM=photon

In the commands that follow, we avoid listing the PLATFORM explicitly to keep the examples concise.

Clean Build

make clean

This clears all output files from the build so that all sources are recompiled.

Specifying custom toolchain location

Custom compiler prefix can be used via an environment variable GCC_PREFIX.

For example when you have installed a custom toolchain under /opt/gcc-arm-embedded-bin you can use invoke make using that toolchain like this:

GCC_PREFIX="/opt/gcc-arm-embedded-bin/bin/arm-none-eabi-" make

The default value of GCC_PREFIX is arm-none-eabi, which uses the ARM version of the GCC toolchain, assumed to be in the path.

Alternatively, a path for the tools can be specified separately as GCC_ARM_PATH, which, if specified should end with a directory separator, e.g.

GCC_ARM_PATH="/opt/gcc-arm-embedded-bin/bin/" make

Controlling Verbosity

By default the makefile is quiet - the only output is when an .elf file is produced to show the size of the flash and RAM memory regions. To produce more verbose output, define the v (verbose) variable, like this:

make v=1

Building individual modules

The top-level makefile builds all modules. Each module can be built on its own by executing the makefile in the module's directory. The make also builds any dependencies.

For example, executing

cd main
make

Will build the main firmware, and all the modules the main firmware depends on.

Product ID

By default, the build system targets the Spark Core (Product ID 0). If your product has been assigned product ID, you should pass this on the command line to specifically target your product. For example:

make PRODUCT_ID=2

Builds the firmware for product ID 2.

Note that this method works only for the Core. On later platforms, the PRODUCT ID and version is specified in your application code via the macros:

PRODUCT_ID(id);

and

PRODUCT_VERSION(version)

Building an Application

To build a new application, first create a subdirectory under user/applications/. You'll find the Tinker app is already there. Let's say we want to create a new app, which we'll call myapp/

mkdir user/applications/myapp

Then add the files needed for your application to that directory. These can be named freely, but should end with .cpp. For example, you might create these files:

myapplication.cpp
mylibrary.cpp
mylibrary.h

You can also add header files - your application subdirectory is on the include path.

To build this application, change directory to main directory and run

make APP=myapp

This will build your application with the resulting .bin file available in build/target/main/platform-0/applications/myapp/myapp.bin.

Including Libraries in your Application

To include libraries in your application, copy or symblink the library sources into your application folder.

To importing libraries from the WebIDE:

  • rename the firmware folder to the same name as the library
  • remove the examples folder

The library should then compile successfully

Changing the Target Directory

If you prefer the output to appear somewhere else than in the build/ directory you can define the TARGET_DIR variable:

make APP=myapp TARGET_DIR=my/custom/output

This will place main.bin (and the other output files) in my/custom/output relative to the current directory. The directory is created if it doesn't exist.

Changing the Target File name

It's also possible to specify the name of the output file, e.g. to revert to the old naming convention of core-firmware.bin, set TARGET_FILE like this:

make APP=myapp TARGET_FILE=core-firmware

This will build the firmware with output as core-firmware.bin in build/target/main/platform-0/applications/myapp.

These can of course also be combined like so:

make APP=myapp TARGET_DIR=myfolder TARGET_FILE=core-firmware

Which will produce myfolder/core-firmware.elf

Compiling an application outside the firmware source

If you prefer to separate your application code from the firmware code, the build system supports this, via the APPDIR parameter.

make APPDIR=/path/to/application/source [TARGET_DIR=/path/to/applications/output] [TARGET_FILE=basename]

Parameters:

  • APPDIR: The relative or full path to the directory containing the user application
  • TARGET_DIR: the directory where the build output should go. If not defined, output files willb e placed under a target directory of the application sources.
  • TARGET_FILE: the basename of the files created. If not defined, defaults to the name of the application sources directory.

Custom makefile

When using APP or APPDIR to build custom application sources, the build system by default will build any .c and .cpp files found in the given directory and it's subdirectories. You can override this and customize the build process by adding the file a makefile to the root of the application sources.

The makefile should be placed in the root of the application folder. The default name for the file is:

  • when building with APP=myapp the default name is myapp.mk
  • when building with APPDIR= the default name is build.mk

The file should be a valid gnu make file.

To customize the build, append values to these variables:

  • CSRC, CPPSRC: the c and cpp files in the build which are compiled and linked, e.g.
CSRC += $(call target_files,,*.c)
CPPSRC += $(call target_files,,*.cpp)

To add all files in the application directory and subdirectories.

  • INCLUDE_DIRS: the include path. Paths are relative to the APPDIR folder.
  • LIB_DIRS: the library search path
  • LIBS: libraries to link (found in the library search path). Library names are given without the lib prefix and .a suffix.
  • LIB_DEPS: full path of additional library files to include.

To use a different name/location for customization makefile file other than build.mk, define USER_MAKEFILE to point to your custom build file. The value of USER_MAKEFILE is the location of your custom makefile relative to the application sources.

## External Libraries

Note that this is preliminary support for external libraries to bring some feature parity with Build. Over the coming weeks, full support for libraries will be added.

External Particle libraries can be compiled and linked with firmware. To add one or more external libraries:

  1. download the library sources store it in a directory outside the firmware, e.g./particle/libs/neopixel for the neopixel library.

  2. remove the examples directory if it exists

cd /particle/libs/neopixel
rm -rf firmware/examples
  1. Rename firmware to be the same as the library name.
mv firmware neopixel

This is so that includes like #include "neopixel/neopixel.h" will function correctly.

  1. Add the APPLIBS variable to the make command which lists the directories contianing libraries to use.
make APPDIR=/particle/apps/myapp APPLIBS=/particle/libs/neopixel

Default application.cpp integrated with firmware

In previous versions of the make system, the application code was integrated with the firmware code at src/application.cpp. This mode of building is still supported, however the location has changed to: user/src/application.cpp.

To build the default application sources, just run make

make

Platform Specific vs Platform Agnostic builds

Currently the low level hardware specific details are abstracted away in the HAL (Hardware Abstraction Layer) implementation. By default the makefile will build for the Spark Core platform which will allow you to add direct hardware calls in your application firmware. You should however try to make use of the HAL functions and methods instead of making direct hardware calls, which will ensure your code is more future proof! To build the firmware as platform agnostic, first run make clean, then simply include SPARK_NO_PLATFORM=y in the make command. This is also a great way to find all of the places in your code that make hardware specific calls, as they should generate an error when building as platform agnostic.

make APP=myapp SPARK_NO_PLATFORM=y

Build Output Directory

The build system uses an out of source directory for all built artifacts. The directory is build/target/. In previous versions of the build system, artifacts were placed under a local build folder. If you would prefer to maintain this style of working, you can create a symlink from build/target/main/platform-0/ to main/build/. Then after building main, the artifacts will be available in the build/ subdirectory as before.

Flashing the firmware to the device via DFU

The program-dfu target can be used when building from main/ to flash the compiled .bin file to the device using dfu-util. For this to work, dfu-util should be installed and in your PATH (Windows), and the device put in DFU mode (flashing yellow).

cd main
make program-dfu

Enabling DFU Mode automatically

Normally, the device requires physical button presses to enter DFU mode. The build also supports automatic DFU mode, where the device will automatically enter DFU mode as part of running the program-dfu target. To enable this, define the environment variable PARTICLE_SERIAL_DEV to point to the name of the serial device. E.g.

PARTICLE_SERIAL_DEV=/dev/tty.usbmodem12345 make all program-dfu

the device will then automatically enter DFU mode and flash the firmware.

(Tested on OS X. Should work on other platforms that provide the stty command.)

Flashing the firmware to the device via ST-Link

The st-flash target can be used to flash all executable code (bootloader, main and modules) to the device. The flash uses the st-flash tool, which should be in your system path.

Debugging

To enable JTAG debugging, add this to the command line:

USE_SWD_JTAG=y

and perform a clean build.

To enable SWD debugging only (freeing up 2 pins) add:

USE_SWD=y

and perform a clean build. For more details on SWD-only debugging see particle-iot#337

Compilation without Cloud Support

[Core only]

To release more resources for applications that don't use the cloud, add SPARK_CLOUD=n to the make command line. This requires a clean build.

After compiling, you should see a 3000 bytes reduction in statically allocated RAM and 35k reduction in flash use.

Building the develop branch

Before the 0.4.0 firmware was released, we recommended the develop branch for early adopters to obtain the code. This is still fine for early adopters, and people that want the bleeding edge, although please keep in mind the code is untested and unreleased.

Pre-releases are available in release/vx.x.x-rc.x branches. Default released firmware is available as release/vx.x.x, which is also then duplicated to release/stable and master branches.

To build the develop branch, follow these guidelines:

  1. export the environment variable PARTICLE_DEVELOP=1
  2. after pulling from the develop branch, be sure to build and flash the system firmware

Recipes and Tips

  • The variables passed to make can also be provided as environment variables, so you avoid having to type them out for each build. The environment variable value can be overridden by passing the variable on the command line.
  • PARTICLE_DEVELOP can be set in the environment when building from the develop branch. (Caveats apply that this is bleeding edge!)
  • PLATFORM set in the environment if you mainly build for one platform, e.g. the Photon.

Photon

Here are some common recipes when working with the photon. Note that PLATFORM=photon doesn't need to be present if you have PLATFORM=photon already defined in your environment.

# Complete rebuild and DFU flash of latest system and application firmware
firmware/modules$ make clean all program-dfu PLATFORM=photon

# Incremental build and flash of latest system and application firmware
firmware/modules$ make all program-dfu PLATFORM=photon

# Build system and application for use with debugger (Programmer Shield)
# APP/APPDIR can also be specified here to build the non-default application
firmware/modules$ make clean all program-dfu PLATFORM=photon USE_SWD_JTAG=y

# Incremental build and flash user application.cpp only (note the directory)
firmware/main$ make all program-dfu PLATFORM=photon

# Build an external application
firmware/modules$ make all PLATFORM=photon APPDIR=~/my_app

For system firmware developers:

# Rebuild and flash the primary unit test application
firmware/main$ make clean all program-dfu TEST=wiring/no_fixture PLATFORM=photon

# Build the compilation test (don't flash on device)
firmware/main$ make TEST=wiring/api PLATFORM=photon