yeelight_light_lamp9.yaml

substitutions:
  name: yeelight-light-lamp9

esphome:
  name: ${name}
  min_version: 2024.6.0

esp32:
  board: esp32doit-devkit-v1
  framework:
    type: esp-idf
    sdkconfig_options:
      CONFIG_FREERTOS_UNICORE: y
    advanced:
      ignore_efuse_mac_crc: true

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

ota:
  platform: esphome

logger:
  level: DEBUG

api:

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO14
      inverted: true
    name: "${name} button"
    id: button
    on_click:
      then:
        - if:
            condition:
              light.is_off: bedside_light
            then:
              light.turn_on:
                id: bedside_light
                brightness: 1.0
            else:
              light.turn_off: bedside_light
    on_press:
      then:
        - if:
            condition:
              light.is_off: bedside_light
            then:
              - delay: 0.5s
              - while:
                  condition:
                    binary_sensor.is_on: button
                  then:
                    - light.dim_relative:
                        id: bedside_light
                        relative_brightness: 5%
                        transition_length: 0.1s
                    - delay: 0.1s
            else:
              - delay: 0.5s
              - while:
                  condition:
                    and:
                      - binary_sensor.is_on: button
                      - light.is_on: bedside_light
                  then:
                    - light.dim_relative:
                        id: bedside_light
                        relative_brightness: -5%
                        transition_length: 0.1s
                    - delay: 0.1s

output:
  - platform: ledc
    pin: GPIO2
    id: output_warm
    power_supply: power
  - platform: ledc
    pin: GPIO27
    id: output_cold
    power_supply: power
  - platform: ledc
    pin: GPIO12
    id: output_nightlight
    power_supply: power
  - platform: gpio
    pin: GPIO33
    id: led_output

power_supply:
  - id: power
    pin: GPIO4
    enable_time: 0s
    keep_on_time: 2s

light:
  - platform: monochromatic
    name: "${name} night light"
    id: night_light
    output: output_nightlight
    gamma_correct: 0
    on_turn_on:
      - light.turn_off: bedside_light
  - platform: cwww
    name: "${name} bedside light"
    id: bedside_light
    cold_white: output_cold
    warm_white: output_warm
    cold_white_color_temperature: 6500 K
    warm_white_color_temperature: 2700 K
    constant_brightness: true
    gamma_correct: 0
    on_turn_on:
      - light.turn_off: night_light
  - platform: binary
    name: "${name} mainboard led"
    output: led_output

# A eeprom at address 0x10 should be found.
# i2c:
#   - id: i2c_bus
#     sda: GPIO17
#     scl: GPIO18
#     scan: true