Compile

Dependencies

For the base system you only need cmake3, git, a C99 compiler and essential build tools (make and some standard Unix tools; alternatively ninja and clang are also supported but not described here):

sudo apt-get install cmake git build-essential

Or on RPM based systems (CentOS):

sudo dnf install -y cmake git gcc-c++ make

Or on macOS Sierra, most of the build tools can be obtained by installing Xcode (from the App Store). Other required tools may be installed using brew. First install brew as described on their website. Then issue the following command to get cmake to complete the basic requirements:

brew install cmake git

Quick Guide

Run the following commands to compile Elektra with non-experimental parts where your system happens to fulfil the dependences (continue reading the rest of the document for details about these steps):

git clone https://github.com/ElektraInitiative/libelektra.git
cd libelektra
mkdir build
cd build
cmake ..  # watch output to see if everything needed is included
ccmake .. # optional: overview of the available build settings (needs cmake-curses-gui)
cmake --build build -- -j5
cmake --build build --target run_nokdbtests # optional: run tests

The last line only runs tests not writing into your system. See TESTING for how to run more tests. Afterwards you can use sudo make install && sudo ldconfig to install Elektra. See INSTALL for more information about installation of self-compiled Elektra (such as how to uninstall it).

Optional Dependences

Note: You do not need to install the dependencies listed here. If they are not available, some of the functionality gets disabled automatically. The core of Elektra never depends on other libraries.

To build documentation you need doxygen (we recommend 1.8.8+), graphviz and ronn:

apt-get install doxygen graphviz ruby-ronn

Or on RPM based systems:

sudo yum install -y doxygen docbook-style-xsl graphviz ruby
gem install ronn

Or on macOS Sierra using brew:

brew install doxygen graphviz
brew install ruby # in case ruby is not already installed
gem install ronn

To build PDF documentation you need pdflatex with

apt-get install pdflatex texlive-fonts-recommended texlive-latex-recommended texlive-latex-extra

For the plugins, please refer to the README.md of the respective plugin. For example, for CentOS:

sudo yum install -y boost-devel libdb-devel GConf2-devel libxml2-devel yajl-devel   \
libcurl-devel augeas-devel libgit2-devel lua-devel swig python34-devel python-devel \
java-1.8.0-openjdk-devel jna ruby-devel byacc

For the Debian package, please refer to debian/control (in the debian branch).

Preparation

Elektra uses cmake3. Tested are cmake version 3.0.2 and 3.7.2 among others.

To configure Elektra graphically (with curses) run (.. belongs to command):

mkdir build && cd build && ccmake ..

and press c to configure the cache (might be necessary multiple times, and once on the first time in case you don‘t see any settings). After applying the desired settings, press g to generate the make file.

All options described here, can also be used with cmake rather than ccmake (.. does also here belong to the command):

mkdir build && cd build && cmake -D<OPTION1>=<VAR1> -D<OPTION2>=<VAR2> ..

For information what you can use as OPTION1 and OPTION2, see above. Note: You have to enclose a value with quotes "" if it contains a semicolon (;). E.g.:

cmake -DPLUGINS="dump;resolver;yajl;list;spec" ..

Some scripts in the folder of the same name may help you running cmake.

Compilers

You should be able to compile Elektra with any C99 compiler. For a list of compilers we test with have a look at:

our Docker containers orchestrated by our Jenkinsfile being built on our build server
Travis
Cirrus

Here is a list of compilers used by developers or build servers:

Compiler	Version	Target
gcc	gcc (Debian 6.3.0-18) 6.3.0	amd64
gcc	gcc 4.8	amd64
gcc	gcc 4.9	amd64
clang	3.8	x86_64-pc-linux-gnu
clang	5.0	x86_64-pc-linux-gnu
clang	6.0	x86_64-pc-linux-gnu
clang	8.0	macOS
gcc	9.1	macOS
gcc/g++	4.9.4 (¹)	openbsd 6.3
mingw	6.0.0-3	amd64
clang	6.0.0	freebsd 11
clang	6.0.1	freebsd 12

(¹) OpenBSD ships an old version of GCC per default, which can not compile Elektra. A manual installation of egcc/eg++ is required. Note that not every OpenBSD mirror provides the eg++ package. Elektra builds are confirmed with egcc/eg++ 4.9.4 in OpenBSD 6.3. The packages are called gcc and g++. Compile with CC=/usr/local/bin/egcc CXX=/usr/local/bin/eg++.

To change the compiler, use cmake settings CMAKE_C_COMPILER and CMAKE_CXX_COMPILER.

To use gcc-4.3 for example

cmake -DCMAKE_C_COMPILER=gcc-4.3 -DCMAKE_CXX_COMPILER=g++-4.3 ..

To change the compiler with ccmake, you may need to toggle advanced options (key t).

Options

Some options, i.e. PLUGINS, BINDINGS and TOOLS are either:

a list of elements separated with a semicolon (;) (note that shells typically need ; to be escaped)
a special uppercase element that gets replaced by a list of elements, that are:
- ALL to include all elements (except elements with unfulfilled dependencies)
- NODEP to include all elements without dependencies
elements prefixed with a minus symbol (-) to exclude an element

Examples for this are especially in the subsection PLUGINS below, but they work in the same fashion for BINDINGS and TOOLS.

Plugins

Read about available plugins here.

Because the core of elektra is minimal, plugins are needed to actually read and write to configuration files (storage plugins), commit the changes (resolver plugins, also takes care about how the configuration files are named) and also do many other tasks related to configuration.

The minimal set of plugins you should add:

dump is the default storage. If you remove it, make sure you add another one and set KDB_DEFAULT_STORAGE to it.
resolver is the default resolver. If you remove it, make sure you add another one and set KDB_DEFAULT_RESOLVER to it.
list delegates work to a list of plugins. Needed for tests. (Required with ENABLE_TESTING.)
spec copies metadata from spec namespace to other namespaces. Needed for tests. (Required with ENABLE_TESTING, except on mingw.)
sync is very useful to not lose any data. If you do not want to include it, make sure to set /sw/elektra/kdb/#0/current/plugins to a value not containing sync (e.g. an empty value). See kdb-mount(1).

By default CMake adds nearly all plugins if the dependencies are present. Only experimental plugins will be omitted by default:

-DPLUGINS="ALL;-EXPERIMENTAL"

To add also experimental plugins, you can use:

-DPLUGINS=ALL

Note that plugins are excluded automatically if dependences are not satisfied. So make sure to install all dependencies you need before you run cmake. For example, to include the plugin yajl, make sure libyajl-dev is installed.

To add all plugins except some plugins you can use:

-DPLUGINS="ALL;-plugin1;-plugin2"

For example, if you want all plugins except the jni plugin you would use:

-DPLUGINS="ALL;-jni"

To add all plugins not having additional dependencies (they need only POSIX), you can use

-DPLUGINS=NODEP

Note, that every infos/provides and infos/status field written uppercase can be used to select plugins that way (see README of individual plugins). You also can combine any of these fields and add/remove other plugins to/from it, e.g. to include all plugins without deps, that provide storage (except yajl) and are maintained, but not include all plugins that are experimental, you would use:

-DPLUGINS="NODEP;STORAGE;-yajl;MAINTAINED;-EXPERIMENTAL"

The inclusion is determined by following preferences:

if the plugin is explicit excluded with -plugin
if the plugin is explicit included with plugin
if the plugin is excluded via a category -CATEGORY
if the plugin is included via a category CATEGORY
plugins are excluded if they are not mentioned at all (neither by category nor by name)

Note, that changing PLUGINS will not modify the defaults used after Elektra was installed. For this endeavour you need to change:

-DKDB_DEFAULT_RESOLVER=resolver

and

-DKDB_DEFAULT_STORAGE=dump

The default resolver and storage will write to KDB_DB_FILE and KDB_DB_INIT (for bootstrapping).

Obviously, you can pass the exact list of plugins you want, e.g.:

-DPLUGINS="resolver;sync;dump"

Some plugins are compile-time configurable. Then you can choose which features are compiled in or out. This is especially important in the bootstrapping phase, because then only the compiled in configuration applies. To compile-time-configure a plugin, you just pass a underscore (_) and flags after the name of the plugin.

The resolver for example distinguish between 3 different kind of flags:

-DPLUGINS="resolver_baseflags_userflags_systemflags"

Following baseflags are available:

c for debugging conflicts
f for enabling file locking
m for enabling mutex locking

The user flags are (the order matters!):

p use passwd/ldap to lookup home directory using getpwuid_r
h use the environment variable HOME
u use the environment variable USER
b use the built-in default cmake variable KDB_DB_HOME

The system flags are (the order matters!):

x use the environment variable XDG_CONFIG_DIRS (: are interpreted as part of filename, no searching is done!) This option is not recommended (unless for testing), because it allows users to fake system configuration.
b use the built-in default cmake variable KDB_DB_SYSTEM
note: if a path that begins with a slash (/) is chosen, the system flags are irrelevant and the path is taken as-is.

For example, one may use:

-DPLUGINS="resolver_lm_uhpb_b"

To add resolver_l_h_b you need to specify

-DPLUGINS="resolver;resolver_l_h_b"

You can add resolver with any combination of the flags, even if they are not available in ALL.

Tools

Tools are used to add extra functionality to Elektra. The flag used to specify which tools are compiled is -DTOOLS, thus flag works similarly to the -DPLUGINS flag, but is more limited in its functionality (which does not matter, because there are not so many tools).

To add all non-experimental tools, you can use::

-DTOOLS=ALL

Note that the behavior is different to PLUGINS which includes all PLUGINS if ALL is used.

To add all tools except of race, you can use:

-DTOOLS="ALL;-race"

To specify specific tools you can use, e.g.:

-DTOOLS=qt-gui;kdb

Bindings

Bindings are used in a like as PLUGINS. For example, to build all maintained bindings and exclude experimental bindings you can use:

-DBINDINGS=MAINTAINED;-EXPERIMENTAL

The SWIG executable may be specified with:

-DSWIG_EXECUTABLE=/usr/bin/swig3.0

If this option is not used, cmake will find the first occurrence of swig in your environment's path.

Some bindings provide different APIs (and not a different language), e.g:

gsettings
INTERCEPT with intercept_fs and intercept_env
IO with io_uv

To not add such APIs, but only swig bindings and cpp, you can use:

-DBINDINGS="SWIG;cpp"

For a list of available bindings see binding's README.md.

`CMAKE_BUILD_TYPE`

Debug, Release or RelWithDebInfo See help bar at bottom of ccmake for that option or: http://www.cmake.org/Wiki/CMake_Useful_Variables

`BUILD_SHARED BUILD_FULL BUILD_STATIC`

BUILD_SHARED is the typical build you want to have on systems that support dlopen. It can be used for desktop builds, but also embedded systems as long as they support dlopen, for example, BUILD_SHARED is used on OpenWRT with musl. Using BUILD_SHARED every plugin is its own shared object.

BUILD_FULL links together all parts of Elektra as a single shared .so library. This is ideal if shared libraries are available, but you want to avoid dlopen. Some tests only work with BUILD_FULL, so you might turn it on to get full coverage.

BUILD_STATIC also links together all parts but as static .a library. It is only useful for systems without dlopen or if the overhead of dlopen needs to be avoided.

All three forms of builds can be intermixed freely.

For example, to enable shared and full build, but disable static build, one would use:

cmake -DBUILD_SHARED=ON -DBUILD_FULL=ON -DBUILD_STATIC=OFF ..

BUILD_DOCUMENTATION

Build documentation with doxygen (API) and ronn (man pages).

If ronn is not found, already compiled man pages will be used instead.

Note: Turning off building the documentation, also turns off installing the documentation, see https://issues.libelektra.org/2522 Then no man pages are available.

Developer Options

As developer you should enable ENABLE_DEBUG and ENABLE_LOGGER:

ENABLE_DEBUG:
- enables assertions
- adds RTLD_NODELETE so that debugger finds symbols even after dlclose
ENABLE_LOGGER: enables logging By default no logging will take place, see CODING for how to get log messages.

Continue reading testing for more information about testing.

`CMAKE_INSTALL_PREFIX`

CMAKE_INSTALL_PREFIX defaults to /usr/local. So by default most files will installed below /usr/local. Exceptions to this are files handled by INSTALL_SYSTEM_FILES.

Edit that cache entry to change that behavior. Also called system prefix within the documentation.

If you want to create a package afterwards it is ok to use paths that you can write to (e.g. -DCMAKE_INSTALL_PREFIX=/home/username/)

`LIB_SUFFIX`

Lets you install libraries into architecture specific folder. E.g. for 32/64 bit systems you might install libraries under lib64. Set LIB_SUFFIX to 64 to achieve exactly that. So the system library folder will be CMAKE_INSTALL_PREFIX/lib64 then.

`TARGET_INCLUDE_FOLDER`

By default include folders will be installed below CMAKE_INSTALL_PREFIX/include/elektra. This entry let you change the elektra. If the entry is empty, the include files will be installed directly to CMAKE_INSTALL_PREFIX/include.

`TARGET_PLUGIN_FOLDER`

Similar to above, but with the plugins. Default is: CMAKE_INSTALL_PREFIX/lib${LIB_SUFFIX}/elektra It can be also left empty to install plugins next to other libraries.

`GTEST_ROOT`

This value specifies the root directory of a local copy of the Google Test framework.

If it is empty (""), then the build system will download a copy of Google Test into the build directory.
Otherwise the build system will search for the file CMakeLists.txt in the top level directory of GTEST_ROOT. If this file exists, then the build system will use the sources files at GTEST_ROOT to translate tests that use Google Test.

It can be provided as CMake or environment variable. If both options are provided the value passed via CMake takes precedence.

It is recommended that you browse through all of the options using ccmake. Afterwards press c again (maybe multiple times until all variables are resolved) and then g to generate. Finally press e to exit.

`INSTALL_BUILD_TOOLS`

Specifies that the build tools, i.e. elektra-export-symbols and elektra-export-symbols are installed (by default off). Is needed for cross-compilation.

`INSTALL_SYSTEM_FILES`

Some of Elektra’s targets require to be installed into specific folders in the file system hierarchy to work properly.

This variable is disabled by default, since it requires the install target to have the rights to write into the corresponding folders. Set -DINSTALL_SYSTEM_FILES=ON, if you also want to install the files listed below.

If you do not have root rights you can also copy the files manually to your user folder.

Currently the installed system files are as following:

Module	Description	Install Path
bash-completion	bash tab auto completion file	`completionsdir` from pkg-config (¹)
zsh-completion	zsh tab auto completion file	/usr/share/zsh/vendor-completions
GIR	introspection file for bindings	`INTROSPECTION_GIRDIR` from pkg-config
GSettings	GSettings backend module	`GIO_MODULE_DIR` from pkg-config

(¹) Or /usr/share/bash-completion/completions as fallback.

`ENABLE_OPTIMIZATIONS`

In order to keep the binaries as small as possible this flag allows to trade memory for speed.

Building

Without IDE

To build the source use:

make

You can pass:

-j for parallel builds
VERBOSE=1 to see the invocations of the compiler

Continue by reading INSTALL.

With CodeBlocks

You can build Elektra using Code::Blocks under Gentoo:

Precondition: Make sure you have a compiler, xml2 (for kdb tool) and xsl (see later) installed. cmake configure will help you with that, it will make sure you don't forget something essential.

For Most Linux system all you have to do is open up a console and

mkdir build
cd build
cmake .. -G 'CodeBlocks - Unix Makefiles'
make package

Note 1: You can use other editor if you like just type cmake at the console to get a list of option you can pass to cmake as long as well as a list of what code editor project cmake can create.

Note 2: For Unix if you have nCurses install you can run ccmake to set important option after running cmake like to enable debug symbol.

Note 3: for Gentoo is recommend to emerge sys-apps/lsb-release to name the package right even thou not required.

Maintainer's Guide

Multiarch

On multiarch (multiple architectures installed in one system), you need to set LIB_SUFFIX. For example, if you want to have the binaries in lib64 and lib32, you would use for the libraries to be installed in ${CMAKE_INSTALL_PREFIX}/lib64:

-DLIB_SUFFIX="64"

If there is a directory for different architectures, simply prepend an /. For example, for Debian:

-DLIB_SUFFIX="/$(DEB_HOST_MULTIARCH)"

`RPATH`

By default Elektra uses RPATH to hide its plugins. This makes it obvious that external applications should not link against plugins. Instead every application should use the elektraModulesLoad() API to load Elektra’s modules.

The folder where the plugins are located is a subdirectory of where the libraries are installed. The name of the subdirectory can be specified using TARGET_PLUGIN_FOLDER and is elektra by default. You might want to encode Elektra’s SOVERSION into the folders name, if you want different major versions of Elektra be co-installable.

Elektra’s use case for RPATH is considered acceptable, so we recommend to use it because:

plugins do not clutter the library folder nor the ld.so.cache
it works well with multiarch (LIB_SUFFIX is also honored for plugins)
which plugins are used should be decided at mount-time and be globally available in the same way for every application. RPATH supports exactly that because it even overrides LD_LIBRARY_PATH.

Unfortunately, there are also drawbacks:

it makes Elektra non-relocatable (RPATH is decided at compile-time, so you cannot simply move Elektra’s installations within the file system (e.g. from /usr/local to /usr)
it requires modern ld.so implementations that honor RPATH from libraries. This is the case for most libc implementations including Linux and macOS, but not for, e.g., musl.

If you want Elektra to not use RPATH, you can add:

-DTARGET_PLUGIN_FOLDER="" -DCMAKE_SKIP_INSTALL_RPATH=ON

Then all plugins are directly installed to the library directory and loaded like other libraries (in any of ld.so paths).

Alternatively, which gives you the advantage not to clutter the main library path, is to add the plugin folder in /etc/ld.so.conf.d/elektra. Note that it still allows applications to link against plugins.

Troubleshooting

Dependencies not Available for Cent OS

Please enable EPEL https://fedoraproject.org/wiki/EPEL

# Install EPEL for RHEL 7
curl -o epel-release-7-8.noarch.rpm \
  http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-8.noarch.rpm
sudo rpm -ivh epel-release-7-8.noarch.rpm
sudo yum update

For Bindings swig3 is recommended. swig2 only works on some distributions. E.g., for Debian Jessie the bindings will crash.

At time of writing, no swig 3 was available, not even in EPEL. Thus you need to install swig3 manually:

curl https://codeload.github.com/swig/swig/tar.gz/rel-3.0.10 | tar xz
cd swig-rel-3.0.10 && ./autogen.sh && ./configure && make
sudo make install
cd ..

Also, no ronn was available, thus you need to do:

gem install ronn

Cross Compiling

In Elektra cross compiling needs two steps. If you get errors like elektra-export-errors_EXE_LOC not found, go on reading.

In the first step, you need to compile Elektra for the host architecture and install the build tools:

cmake -DINSTALL_BUILD_TOOLS=ON \
      -DCMAKE_PREFIX_PATH=$(STAGING_DIR_HOST) \
      ..
cmake --build . -- -j5
cmake --build . --target install

Where $(STAGING_DIR_HOST) must be a directory to be found in the later build process. In particular, $(STAGING_DIR_HOST)/bin must be in a directory found by a later find_program.

Then you need to compile Elektra again, but for the target architecture. Now, the build tools such as elektra-export-errors should be found in the $(STAGING_DIR_HOST)/bin where they were installed before.

For reference, you can look into the OpenWRT Elektra Makefile and the CMake in OpenWRT.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

COMPILE.md

COMPILE.md

Compile

Dependencies

Quick Guide

Optional Dependences

Preparation

Compilers

Options

Plugins

Tools

Bindings

`CMAKE_BUILD_TYPE`

`BUILD_SHARED BUILD_FULL BUILD_STATIC`

BUILD_DOCUMENTATION

Developer Options

`CMAKE_INSTALL_PREFIX`

`LIB_SUFFIX`

`TARGET_INCLUDE_FOLDER`

`TARGET_PLUGIN_FOLDER`

`GTEST_ROOT`

`INSTALL_BUILD_TOOLS`

`INSTALL_SYSTEM_FILES`

`ENABLE_OPTIMIZATIONS`

Building

Without IDE

With CodeBlocks

Maintainer's Guide

Multiarch

`RPATH`

Troubleshooting

Dependencies not Available for Cent OS

Cross Compiling

See Also

Files

COMPILE.md

Latest commit

History

COMPILE.md

File metadata and controls

Compile

Dependencies

Quick Guide

Optional Dependences

Preparation

Compilers

Options

Plugins

Tools

Bindings

CMAKE_BUILD_TYPE

BUILD_SHARED BUILD_FULL BUILD_STATIC

BUILD_DOCUMENTATION

Developer Options

CMAKE_INSTALL_PREFIX

LIB_SUFFIX

TARGET_INCLUDE_FOLDER

TARGET_PLUGIN_FOLDER

GTEST_ROOT

INSTALL_BUILD_TOOLS

INSTALL_SYSTEM_FILES

ENABLE_OPTIMIZATIONS

Building

Without IDE

With CodeBlocks

Maintainer's Guide

Multiarch

RPATH

Troubleshooting

Dependencies not Available for Cent OS

Cross Compiling

See Also

`CMAKE_BUILD_TYPE`

`BUILD_SHARED BUILD_FULL BUILD_STATIC`

`CMAKE_INSTALL_PREFIX`

`LIB_SUFFIX`

`TARGET_INCLUDE_FOLDER`

`TARGET_PLUGIN_FOLDER`

`GTEST_ROOT`

`INSTALL_BUILD_TOOLS`

`INSTALL_SYSTEM_FILES`

`ENABLE_OPTIMIZATIONS`

`RPATH`