Skip to content

tsenart/vegeta

Repository files navigation

Vegeta Build Status Go Report Card GoDoc Gitter Donate

Vegeta is a versatile HTTP load testing tool built out of a need to drill HTTP services with a constant request rate. It can be used both as a command line utility and a library.

Vegeta

Install

Pre-compiled executables

Get them here.

Homebrew on Mac OS X

You can install Vegeta using the Homebrew package manager on Mac OS X:

$ brew update && brew install vegeta

Source

You need go installed and GOBIN in your PATH. Once that is done, run the command:

$ go get -u github.com/tsenart/vegeta

Contributing

See CONTRIBUTING.md.

Usage manual

Usage: vegeta [global flags] <command> [command flags]

global flags:
  -cpus int
      Number of CPUs to use (default 8)
  -profile string
      Enable profiling of [cpu, heap]
  -version
      Print version and exit

attack command:
  -body string
      Requests body file
  -cert string
      TLS client PEM encoded certificate file
  -connections int
      Max open idle connections per target host (default 10000)
  -duration duration
      Duration of the test [0 = forever]
  -format string
      Targets format [http, json] (default "http")
  -h2c
      Send HTTP/2 requests without TLS encryption
  -header value
      Request header
  -http2
      Send HTTP/2 requests when supported by the server (default true)
  -insecure
      Ignore invalid server TLS certificates
  -keepalive
      Use persistent connections (default true)
  -key string
      TLS client PEM encoded private key file
  -laddr value
      Local IP address (default 0.0.0.0)
  -lazy
      Read targets lazily
  -name string
      Attack name
  -output string
      Output file (default "stdout")
  -rate uint
      Requests per second (default 50)
  -redirects int
      Number of redirects to follow. -1 will not follow but marks as success (default 10)
  -root-certs value
      TLS root certificate files (comma separated list)
  -targets string
      Targets file (default "stdin")
  -timeout duration
      Requests timeout (default 30s)
  -workers uint
      Initial number of workers (default 10)

report command:
  -inputs string
      Input files (comma separated) (default "stdin")
  -output string
      Output file (default "stdout")
  -reporter string
      Reporter [text, json, plot, hist[buckets]] (default "text")

dump command:
  -dumper string
      Dumper [json, csv] (default "json")
  -inputs string
      Input files (comma separated) (default "stdin")
  -output string
      Output file (default "stdout")

examples:
  echo "GET http://localhost/" | vegeta attack -duration=5s | tee results.bin | vegeta report
  vegeta attack -targets=targets.txt > results.bin
  vegeta report -inputs=results.bin -reporter=json > metrics.json
  cat results.bin | vegeta report -reporter=plot > plot.html
  cat results.bin | vegeta report -reporter="hist[0,100ms,200ms,300ms]"

-cpus

Specifies the number of CPUs to be used internally. It defaults to the amount of CPUs available in the system.

-profile

Specifies which profiler to enable during execution. Both cpu and heap profiles are supported. It defaults to none.

-version

Prints the version and exits.

attack command

-body

Specifies the file whose content will be set as the body of every request unless overridden per attack target, see -targets.

-cert

Specifies the PEM encoded TLS client certificate file to be used with HTTPS requests. If -key isn't specified, it will be set to the value of this flag.

-connections

Specifies the maximum number of idle open connections per target host.

-duration

Specifies the amount of time to issue request to the targets. The internal concurrency structure's setup has this value as a variable. The actual run time of the test can be longer than specified due to the responses delay. Use 0 for an infinite attack.

-format

Specifies the targets format to decode.

json format

The JSON format makes integration with programs that produce targets dynamically easier. Each target is one JSON object in its own line. The method and url fields are required. If present, the body field must be base64 encoded. The generated JSON Schema defines the format in detail.

jq -ncM '{method: "GET", url: "http://goku", body: "Punch!" | @base64, header: {"Content-Type": ["text/plain"]}}' |
  vegeta attack -format=json -rate=100 | vegeta dump
http format

The http format almost resembles the plain-text HTTP message format defined in RFC 2616 but it doesn't support in-line HTTP bodies, only references to files that are loaded and used as request bodies (as exemplified below).

Although targets in this format can be produced by other programs, it was originally meant to be used by people writing targets by hand for simple use cases.

Here are a few examples of valid targets files in the http format:

Simple targets
GET http://goku:9090/path/to/dragon?item=ball
GET http://user:password@goku:9090/path/to
HEAD http://goku:9090/path/to/success
Targets with custom headers
GET http://user:password@goku:9090/path/to
X-Account-ID: 8675309

DELETE http://goku:9090/path/to/remove
Confirmation-Token: 90215
Authorization: Token DEADBEEF
Targets with custom bodies
POST http://goku:9090/things
@/path/to/newthing.json

PATCH http://goku:9090/thing/71988591
@/path/to/thing-71988591.json
Targets with custom bodies and headers
POST http://goku:9090/things
X-Account-ID: 99
@/path/to/newthing.json

-h2c

Specifies that HTTP2 requests are to be sent over TCP without TLS encryption.

-header

Specifies a request header to be used in all targets defined, see -targets. You can specify as many as needed by repeating the flag.

-http2

Specifies whether to enable HTTP/2 requests to servers which support it.

-insecure

Specifies whether to ignore invalid server TLS certificates.

-keepalive

Specifies whether to reuse TCP connections between HTTP requests.

-key

Specifies the PEM encoded TLS client certificate private key file to be used with HTTPS requests.

-laddr

Specifies the local IP address to be used.

-lazy

Specifies whether to read the input targets lazily instead of eagerly. This allows streaming targets into the attack command and reduces memory footprint. The trade-off is one of added latency in each hit against the targets.

-output

Specifies the output file to which the binary results will be written to. Made to be piped to the report command input. Defaults to stdout.

-rate

Specifies the requests per second rate to issue against the targets. The actual request rate can vary slightly due to things like garbage collection, but overall it should stay very close to the specified.

-redirects

Specifies the max number of redirects followed on each request. The default is 10. When the value is -1, redirects are not followed but the response is marked as successful.

-root-certs

Specifies the trusted TLS root CAs certificate files as a comma separated list. If unspecified, the default system CAs certificates will be used.

-targets

Specifies the attack targets in a line separated file, defaulting to stdin. The format should be as follows, combining any or all of the following:

-timeout

Specifies the timeout for each request. The default is 0 which disables timeouts.

-workers

Specifies the initial number of workers used in the attack. The actual number of workers will increase if necessary in order to sustain the requested rate.

report command

-inputs

Specifies the input files to generate the report of, defaulting to stdin. These are the output of vegeta attack. You can specify more than one (comma separated) and they will be merged and sorted before being used by the reports.

-output

Specifies the output file to which the report will be written to.

-reporter

Specifies the kind of report to be generated. It defaults to text.

text
Requests      [total, rate]             1200, 120.00
Duration      [total, attack, wait]     10.094965987s, 9.949883921s, 145.082066ms
Latencies     [mean, 50, 95, 99, max]   113.172398ms, 108.272568ms, 140.18235ms, 247.771566ms, 264.815246ms
Bytes In      [total, mean]             3714690, 3095.57
Bytes Out     [total, mean]             0, 0.00
Success       [ratio]                   55.42%
Status Codes  [code:count]              0:535  200:665
Error Set:
Get http://localhost:6060: dial tcp 127.0.0.1:6060: connection refused
Get http://localhost:6060: read tcp 127.0.0.1:6060: connection reset by peer
Get http://localhost:6060: dial tcp 127.0.0.1:6060: connection reset by peer
Get http://localhost:6060: write tcp 127.0.0.1:6060: broken pipe
Get http://localhost:6060: net/http: transport closed before response was received
Get http://localhost:6060: http: can't write HTTP request on broken connection
json
{
  "latencies": {
    "total": 237119463,
    "mean": 2371194,
    "50th": 2854306,
    "95th": 3478629,
    "99th": 3530000,
    "max": 3660505
  },
  "bytes_in": {
    "total": 606700,
    "mean": 6067
  },
  "bytes_out": {
    "total": 0,
    "mean": 0
  },
  "earliest": "2015-09-19T14:45:50.645818631+02:00",
  "latest": "2015-09-19T14:45:51.635818575+02:00",
  "end": "2015-09-19T14:45:51.639325797+02:00",
  "duration": 989999944,
  "wait": 3507222,
  "requests": 100,
  "rate": 101.01010672380401,
  "success": 1,
  "status_codes": {
    "200": 100
  },
  "errors": []
}
plot

Generates an HTML5 page with an interactive plot based on Dygraphs. Click and drag to select a region to zoom into. Double click to zoom out. Input a different number on the bottom left corner input field to change the moving average window size (in data points).

Each point on the plot shows a request, the X axis represents the time at the start of the request and the Y axis represents the time taken to complete that request.

Plot

hist

Computes and prints a text based histogram for the given buckets. Each bucket upper bound is non-inclusive.

cat results.bin | vegeta report -reporter='hist[0,2ms,4ms,6ms]'
Bucket         #     %       Histogram
[0,     2ms]   6007  32.65%  ########################
[2ms,   4ms]   5505  29.92%  ######################
[4ms,   6ms]   2117  11.51%  ########
[6ms,   +Inf]  4771  25.93%  ###################

dump command

-inputs

Specifies the input files containing attack results to be dumped. You can specify more than one (comma separated).

-output

Specifies the output file to which the dump will be written to.

-dumper

Specifies the dump format.

json

Dumps attack results as JSON objects.

csv

Dumps attack results as CSV records with six columns. The columns are: unix timestamp in ns since epoch, http status code, request latency in ns, bytes out, bytes in, and lastly the error.

Usage: Distributed attacks

Whenever your load test can't be conducted due to Vegeta hitting machine limits such as open files, memory, CPU or network bandwidth, it's a good idea to use Vegeta in a distributed manner.

In a hypothetical scenario where the desired attack rate is 60k requests per second, let's assume we have 3 machines with vegeta installed.

Make sure open file descriptor and process limits are set to a high number for your user on each machine using the ulimit command.

We're ready to start the attack. All we need to do is to divide the intended rate by the number of machines, and use that number on each attack. Here we'll use pdsh for orchestration.

$ PDSH_RCMD_TYPE=ssh pdsh -b -w '10.0.1.1,10.0.2.1,10.0.3.1' \
    'echo "GET http://target/" | vegeta attack -rate=20000 -duration=60s > result.bin'

After the previous command finishes, we can gather the result files to use on our report.

$ for machine in 10.0.1.1 10.0.2.1 10.0.3.1; do
    scp $machine:~/result.bin $machine.bin &
  done

The report command accepts multiple result files in a comma separated list. It'll read and sort them by timestamp before generating reports.

$ vegeta report -inputs="10.0.1.1.bin,10.0.2.1.bin,10.0.3.1.bin"
Requests      [total, rate]         3600000, 60000.00
Latencies     [mean, 95, 99, max]   223.340085ms, 326.913687ms, 416.537743ms, 7.788103259s
Bytes In      [total, mean]         3714690, 3095.57
Bytes Out     [total, mean]         0, 0.00
Success       [ratio]               100.0%
Status Codes  [code:count]          200:3600000
Error Set:

Usage: Real-time Analysis

If you are a happy user of iTerm, you can integrate vegeta with jplot using jaggr to plot a vegeta report in real-time in the comfort of you terminal:

echo 'GET http://localhost:8080' | \
    vegeta attack -rate 5000 -duration 10m | vegeta dump | \
    jaggr @count=rps \
          hist\[100,200,300,400,500\]:code \
          p25,p50,p95:latency \
          sum:bytes_in \
          sum:bytes_out | \
    jplot rps+code.hist.100+code.hist.200+code.hist.300+code.hist.400+code.hist.500 \
          latency.p95+latency.p50+latency.p25 \
          bytes_in.sum+bytes_out.sum

Usage (Library)

package main

import (
  "fmt"
  "time"

  vegeta "github.com/tsenart/vegeta/lib"
)

func main() {
  rate := uint64(100) // per second
  duration := 4 * time.Second
  targeter := vegeta.NewStaticTargeter(vegeta.Target{
    Method: "GET",
    URL:    "http://localhost:9100/",
  })
  attacker := vegeta.NewAttacker()

  var metrics vegeta.Metrics
  for res := range attacker.Attack(targeter, rate, duration) {
    metrics.Add(res)
  }
  metrics.Close()

  fmt.Printf("99th percentile: %s\n", metrics.Latencies.P99)
}

Limitations

There will be an upper bound of the supported rate which varies on the machine being used. You could be CPU bound (unlikely), memory bound (more likely) or have system resource limits being reached which ought to be tuned for the process execution. The important limits for us are file descriptors and processes. On a UNIX system you can get and set the current soft-limit values for a user.

$ ulimit -n # file descriptors
2560
$ ulimit -u # processes / threads
709

Just pass a new number as the argument to change it.

License

See LICENSE.

Donate

If you use and love Vegeta, please consider sending some Satoshi to 1MDmKC51ve7Upxt75KoNM6x1qdXHFK6iW2. In case you want to be mentioned as a sponsor, let me know!

Donate Bitcoin