Wake from Sleep Display Turns on Only Once

[ahalolol]

Describe the bug
After installation with default Intel iGPU setup, when going to sleep for the first time on a cold boot, the device wakes up normally with internal display ON. On second sleep wake, the internal display cannot be turned on. Here, plugging into a usb-c monitor will trigger the internal display to power on.

To Reproduce
Steps to reproduce the behavior:

1. Sleep the device by closing the lid
2. Open lid to wake
3. Sleep the device by closing the lid again
4. Open lid to wake again
5. See error
6. Plug in usb-c monitor
7. See internal display turns back on

Expected behavior
Device should be able to wake internal display again without external aid

Screenshots
n/a

Appropriate boot and/or debug logs
No visible log in Console app as there was not a crash nor panic

If you do cannot provide boot and/or debug logs, please provide a ZIP of your EFI

• Opencore 0.9.6
• Config.plist attached
  Config.plist.zip
• ACPI folder = no change
• Resource folder = no change
• Kext folder =
  • AirportItlwm.kext
  • AppleALC.kext
  • BlueToolFixup.kext
  • BrightnessKeys.kext
  • CPUFriend.kext
  • CPUFriendDataProvider.kext
  • HibernationFixup.kext
  • IntelBluetoothFirmware.kext
  • IntelBTPatcher.kext
  • IntelMausi.kext
  • Lilu.kext
  • NVMeFix.kext
  • SMCBatteryManager.kext
  • SMCLightSensor.kext
  • SMCProcessor.kext
  • VirtualSMC.kext
  • VoodooPS2Controller.kext
  • VoodooRMI.kext
  • VoodooSMBus.kext
  • WhateverGreen.kext
  • YogaSMC.kext

Note:

• HiDPI applied to 2560x1440 non-HDR display. Removal of HiDPI doesn't resolve issue.
• Addition of igfxonln=1 to bootarg doesn't fix the issue

[Dwigth]

Did you fix it?

[ahalolol]

Did you fix it?

not yet. Do you have this issue too?

[ytlmike]

same issue, needs help.

[NotKeyno6]

for me, when I using hibernation mode 25 with RTCMemoryFixup

lidwake 1
lowpowermode 1
standbydelayhigh 86400
standbydelaylow 10800
standby 1
proximitywake 0
ttyskeepawake 1
hibernatemode 25
powernap 0
gpuswitch 2
hibernatefile /var/vm/sleepimage
highstandbythreshold 50
displaysleep 5
womp 0
networkoversleep 0
sleep 1 (sleep prevented by sharingd)
halfdim 1
acwake 0
tcpkeepalive 1
disksleep 10

it seems sometime may showing this screen

in hibernation mode 3, it's the same issues as what ahalolol said, even though it could somehow can temporary fix it by close the lid for around 15 secs. But it will flickering randomly.
Also I notices when I use this method, The HiDPI will set back to 1400x900 (I'm using 1680x945 HiDPI in 1080P model), it can be fix just reboot or not hibernate the laptop.