You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
It seems firewalld has had this functionality since "firewalld-0.3.15". I have not been able to find a reference to it in this module. Is there a plan to add this functionality at a later date? I could see common scenarios being the addition of l2tp, gre, and igmp protocols to a zone.
From the firewalld man page:
List protocols added for zone as a space separated list. If zone is omitted, default zone will be used.
[--permanent] [--zone=zone] --add-protocol=protocol [--timeout=timeval]
Add the protocol for zone. If zone is omitted, default zone will be used. This option can be specified multiple times. If a timeout is supplied, the rule will be active for the specified amount of time and will be removed automatically afterwards. timeval is either a number (of seconds) or number followed by one of characters s (seconds), m (minutes), h (hours), for example 20m or 1h.
The protocol can be any protocol supported by the system. Please have a look at /etc/protocols for supported protocols.
The --timeout option is not combinable with the --permanent option.
[--permanent] [--zone=zone] --remove-protocol=protocol
Remove the protocol from zone. If zone is omitted, default zone will be used. This option can be specified multiple times.
[--permanent] [--zone=zone] --query-protocol=protocol
Return whether the protocol has been added for zone. If zone is omitted, default zone will be used. Returns 0 if true, 1 otherwise.
Example of /etc/protocols:
# $Id: protocols,v 1.11 2011/05/03 14:45:40 ovasik Exp $
#
# Internet (IP) protocols
#
# from: @(#)protocols 5.1 (Berkeley) 4/17/89
#
# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
# Last IANA update included dated 2011-05-03
#
# See also http://www.iana.org/assignments/protocol-numbers
ip 0 IP # internet protocol, pseudo protocol number
hopopt 0 HOPOPT # hop-by-hop options for ipv6
icmp 1 ICMP # internet control message protocol
igmp 2 IGMP # internet group management protocol
ggp 3 GGP # gateway-gateway protocol
ipv4 4 IPv4 # IPv4 encapsulation
st 5 ST # ST datagram mode
tcp 6 TCP # transmission control protocol
cbt 7 CBT # CBT, Tony Ballardie <A.Ballardie@cs.ucl.ac.uk>
egp 8 EGP # exterior gateway protocol
igp 9 IGP # any private interior gateway (Cisco: for IGRP)
bbn-rcc 10 BBN-RCC-MON # BBN RCC Monitoring
nvp 11 NVP-II # Network Voice Protocol
pup 12 PUP # PARC universal packet protocol
argus 13 ARGUS # ARGUS
emcon 14 EMCON # EMCON
xnet 15 XNET # Cross Net Debugger
chaos 16 CHAOS # Chaos
udp 17 UDP # user datagram protocol
mux 18 MUX # Multiplexing protocol
dcn 19 DCN-MEAS # DCN Measurement Subsystems
hmp 20 HMP # host monitoring protocol
prm 21 PRM # packet radio measurement protocol
xns-idp 22 XNS-IDP # Xerox NS IDP
trunk-1 23 TRUNK-1 # Trunk-1
trunk-2 24 TRUNK-2 # Trunk-2
leaf-1 25 LEAF-1 # Leaf-1
leaf-2 26 LEAF-2 # Leaf-2
rdp 27 RDP # "reliable datagram" protocol
irtp 28 IRTP # Internet Reliable Transaction Protocol
iso-tp4 29 ISO-TP4 # ISO Transport Protocol Class 4
netblt 30 NETBLT # Bulk Data Transfer Protocol
mfe-nsp 31 MFE-NSP # MFE Network Services Protocol
merit-inp 32 MERIT-INP # MERIT Internodal Protocol
dccp 33 DCCP # Datagram Congestion Control Protocol
3pc 34 3PC # Third Party Connect Protocol
idpr 35 IDPR # Inter-Domain Policy Routing Protocol
xtp 36 XTP # Xpress Tranfer Protocol
ddp 37 DDP # Datagram Delivery Protocol
idpr-cmtp 38 IDPR-CMTP # IDPR Control Message Transport Proto
tp++ 39 TP++ # TP++ Transport Protocol
il 40 IL # IL Transport Protocol
ipv6 41 IPv6 # IPv6 encapsulation
sdrp 42 SDRP # Source Demand Routing Protocol
ipv6-route 43 IPv6-Route # Routing Header for IPv6
ipv6-frag 44 IPv6-Frag # Fragment Header for IPv6
idrp 45 IDRP # Inter-Domain Routing Protocol
rsvp 46 RSVP # Resource ReSerVation Protocol
gre 47 GRE # Generic Routing Encapsulation
dsr 48 DSR # Dynamic Source Routing Protocol
bna 49 BNA # BNA
esp 50 ESP # Encap Security Payload
ipv6-crypt 50 IPv6-Crypt # Encryption Header for IPv6 (not in official list)
ah 51 AH # Authentication Header
ipv6-auth 51 IPv6-Auth # Authentication Header for IPv6 (not in official list)
i-nlsp 52 I-NLSP # Integrated Net Layer Security TUBA
swipe 53 SWIPE # IP with Encryption
narp 54 NARP # NBMA Address Resolution Protocol
mobile 55 MOBILE # IP Mobility
tlsp 56 TLSP # Transport Layer Security Protocol
skip 57 SKIP # SKIP
ipv6-icmp 58 IPv6-ICMP # ICMP for IPv6
ipv6-nonxt 59 IPv6-NoNxt # No Next Header for IPv6
ipv6-opts 60 IPv6-Opts # Destination Options for IPv6
# 61 # any host internal protocol
cftp 62 CFTP # CFTP
# 63 # any local network
sat-expak 64 SAT-EXPAK # SATNET and Backroom EXPAK
kryptolan 65 KRYPTOLAN # Kryptolan
rvd 66 RVD # MIT Remote Virtual Disk Protocol
ippc 67 IPPC # Internet Pluribus Packet Core
# 68 # any distributed file system
sat-mon 69 SAT-MON # SATNET Monitoring
visa 70 VISA # VISA Protocol
ipcv 71 IPCV # Internet Packet Core Utility
cpnx 72 CPNX # Computer Protocol Network Executive
cphb 73 CPHB # Computer Protocol Heart Beat
wsn 74 WSN # Wang Span Network
pvp 75 PVP # Packet Video Protocol
br-sat-mon 76 BR-SAT-MON # Backroom SATNET Monitoring
sun-nd 77 SUN-ND # SUN ND PROTOCOL-Temporary
wb-mon 78 WB-MON # WIDEBAND Monitoring
wb-expak 79 WB-EXPAK # WIDEBAND EXPAK
iso-ip 80 ISO-IP # ISO Internet Protocol
vmtp 81 VMTP # Versatile Message Transport
secure-vmtp 82 SECURE-VMTP # SECURE-VMTP
vines 83 VINES # VINES
ttp 84 TTP # TTP
nsfnet-igp 85 NSFNET-IGP # NSFNET-IGP
dgp 86 DGP # Dissimilar Gateway Protocol
tcf 87 TCF # TCF
eigrp 88 EIGRP # Enhanced Interior Routing Protocol (Cisco)
ospf 89 OSPFIGP # Open Shortest Path First IGP
sprite-rpc 90 Sprite-RPC # Sprite RPC Protocol
larp 91 LARP # Locus Address Resolution Protocol
mtp 92 MTP # Multicast Transport Protocol
ax.25 93 AX.25 # AX.25 Frames
ipip 94 IPIP # Yet Another IP encapsulation
micp 95 MICP # Mobile Internetworking Control Pro.
scc-sp 96 SCC-SP # Semaphore Communications Sec. Pro.
etherip 97 ETHERIP # Ethernet-within-IP Encapsulation
encap 98 ENCAP # Yet Another IP encapsulation
# 99 # any private encryption scheme
gmtp 100 GMTP # GMTP
ifmp 101 IFMP # Ipsilon Flow Management Protocol
pnni 102 PNNI # PNNI over IP
pim 103 PIM # Protocol Independent Multicast
aris 104 ARIS # ARIS
scps 105 SCPS # SCPS
qnx 106 QNX # QNX
a/n 107 A/N # Active Networks
ipcomp 108 IPComp # IP Payload Compression Protocol
snp 109 SNP # Sitara Networks Protocol
compaq-peer 110 Compaq-Peer # Compaq Peer Protocol
ipx-in-ip 111 IPX-in-IP # IPX in IP
vrrp 112 VRRP # Virtual Router Redundancy Protocol
pgm 113 PGM # PGM Reliable Transport Protocol
# 114 # any 0-hop protocol
l2tp 115 L2TP # Layer Two Tunneling Protocol
ddx 116 DDX # D-II Data Exchange
iatp 117 IATP # Interactive Agent Transfer Protocol
stp 118 STP # Schedule Transfer
srp 119 SRP # SpectraLink Radio Protocol
uti 120 UTI # UTI
smp 121 SMP # Simple Message Protocol
sm 122 SM # SM
ptp 123 PTP # Performance Transparency Protocol
isis 124 ISIS # ISIS over IPv4
fire 125 FIRE
crtp 126 CRTP # Combat Radio Transport Protocol
crdup 127 CRUDP # Combat Radio User Datagram
sscopmce 128 SSCOPMCE
iplt 129 IPLT
sps 130 SPS # Secure Packet Shield
pipe 131 PIPE # Private IP Encapsulation within IP
sctp 132 SCTP # Stream Control Transmission Protocol
fc 133 FC # Fibre Channel
rsvp-e2e-ignore 134 RSVP-E2E-IGNORE
mobility-header 135 Mobility-Header # Mobility Header
udplite 136 UDPLite
mpls-in-ip 137 MPLS-in-IP
manet 138 manet # MANET Protocols
hip 139 HIP # Host Identity Protocol
shim6 140 Shim6 # Shim6 Protocol
wesp 141 WESP # Wrapped Encapsulating Security Payload
rohc 142 ROHC # Robust Header Compression
# 143-252 Unassigned [IANA]
# 253 Use for experimentation and testing [RFC3692]
# 254 Use for experimentation and testing [RFC3692]
# 255 Reserved [IANA]
The text was updated successfully, but these errors were encountered:
After further testing with "custom_service", It seems that you can add a protocol to a custom service without a port defined and it will set it in the protocols sections of the service. This feature was added in merge #171. Sorry for not catching this before opening up an issue.
Example manifest:
firewalld::custom_service{'pptp':
short => 'pptp',
description => 'Point to Point Tunneling Protocol',
port => [{
'port' => '1723',
'protocol' => 'tcp',
},
{
'port' => '',
'protocol' => 'gre',
}],
}
...will produce this:
firewall-cmd --info-service=pptp
pptp
ports: 1723/tcp
protocols: gre
source-ports:
modules:
destination:
This behavior works great for my best practices as I define everything in services anyway, however, it seems that this does not work directly on a zone (instead of through a service) if one wanted to do so.
Example manifest:
firewalld_port { 'add protocol GRE to the public public zone':
ensure => present,
zone => 'public',
protocol => 'gre',
}
...will error:
Error: Execution of '/bin/firewall-cmd --permanent --zone public --add-port add GRE to the public public zone/gre' returned 102:
Error: Firewalld_port[add GRE to the public public zone]/ensure: change from 'absent' to 'present' failed: Execution of '/bin/firewall-cmd --permanent --zone public --add-port add GRE to the public public zone/gre' returned 102:
It seems firewalld has had this functionality since "firewalld-0.3.15". I have not been able to find a reference to it in this module. Is there a plan to add this functionality at a later date? I could see common scenarios being the addition of l2tp, gre, and igmp protocols to a zone.
From the firewalld man page:
Example of /etc/protocols:
The text was updated successfully, but these errors were encountered: