Driver Problem OCe1111000 / Driver loaded but "No Connection"

[Test012345678949]

Hi,

it is known that Emulex OCe Driver are critical.
XCP 8.2.1 recognized the card without problems

Jan 11 22:49:22 xenserver-2 kernel: [    8.029611] be2net 0000:09:00.0: created 4 TX queue(s)
Jan 11 22:49:22 xenserver-2 kernel: [    8.149593] be2net 0000:09:00.0: created 5 RX queue(s)
Jan 11 22:49:22 xenserver-2 kernel: [    8.202735] be2net 0000:09:00.0: FW version is 11.1.215.0
Jan 11 22:49:22 xenserver-2 kernel: [    8.203765] be2net 0000:09:00.0: HW Flow control - TX:1 RX:1
Jan 11 22:49:22 xenserver-2 kernel: [    8.208991] be2net 0000:09:00.0: Emulex OneConnect(be3): PF  port 0
Jan 11 22:49:22 xenserver-2 kernel: [    8.209019] be2net 0000:09:00.1: be2net version is 12.0.0.0
Jan 11 22:49:22 xenserver-2 kernel: [    8.209116] xen: registering gsi 34 triggering 0 polarity 1
Jan 11 22:49:22 xenserver-2 kernel: [    8.209165] xen: --> pirq=34 -> irq=34 (gsi=34)
Jan 11 22:49:22 xenserver-2 kernel: [    8.209645] be2net 0000:09:00.1: PCIe error reporting enabled
Jan 11 22:49:22 xenserver-2 kernel: [    8.413585] be2net 0000:09:00.1: adapter not in advanced mode
Jan 11 22:49:22 xenserver-2 kernel: [    8.461585] be2net 0000:09:00.1: FW config: function_mode=0x2003, function_caps=0xf
Jan 11 22:49:22 xenserver-2 kernel: [    8.605588] be2net 0000:09:00.1: Max: txqs 16, rxqs 5, rss 4, eqs 16, vfs 0
Jan 11 22:49:22 xenserver-2 kernel: [    8.605592] be2net 0000:09:00.1: Max: uc-macs 30, mc-macs 64, vlans 64
Jan 11 22:49:22 xenserver-2 kernel: [    8.605924] be2net 0000:09:00.1: enabled 4 MSI-x vector(s) for NIC
Jan 11 22:49:22 xenserver-2 kernel: [    8.917596] be2net 0000:09:00.1: created 4 TX queue(s)
Jan 11 22:49:22 xenserver-2 kernel: [    9.037583] be2net 0000:09:00.1: created 5 RX queue(s)
Jan 11 22:49:22 xenserver-2 kernel: [    9.090722] be2net 0000:09:00.1: FW version is 11.1.215.0
Jan 11 22:49:22 xenserver-2 kernel: [    9.091750] be2net 0000:09:00.1: HW Flow control - TX:1 RX:1
Jan 11 22:49:22 xenserver-2 kernel: [    9.096948] be2net 0000:09:00.1: Emulex OneConnect(be3): PF  port 1

But in the end the card shows "No Connection"

This is some issue i don't know, but the reason i write.

With this code the card is working:

nano /etc/rc.local

#!/bin/bash
# THIS FILE IS ADDED FOR COMPATIBILITY PURPOSES
#
# It is highly advisable to create own systemd services or udev rules
# to run scripts during boot instead of using this file.
#
# In contrast to previous versions due to parallel execution during boot
# this script will NOT be run after all other services.
#
# Please note that you must run 'chmod +x /etc/rc.d/rc.local' to ensure
# that this script will be executed during boot.

touch /var/lock/subsys/local
sleep 30
ethtool -t eth4 >> /var/log/kern.log
ethtool -t eth5 >> /var/log/kern.log

exit 0

chmod +x /etc/rc.local

[Test012345678949]

Here additional the output after ethtool activities:

Jan 11 22:49:26 xenserver-2 kernel: [   19.336485] be2net 0000:09:00.0 eth4: renamed from side-395-eth4
Jan 11 22:49:26 xenserver-2 kernel: [   19.392488] be2net 0000:09:00.1 eth5: renamed from side-4369-eth5
Jan 11 22:49:27 xenserver-2 kernel: [   19.710675] 8021q: 802.1Q VLAN Support v1.8
Jan 11 22:49:27 xenserver-2 kernel: [   20.561495] openvswitch: Open vSwitch switching datapath
Jan 11 22:49:29 xenserver-2 kernel: [   22.034979] device ovs-system entered promiscuous mode
Jan 11 22:49:29 xenserver-2 kernel: [   22.113970] device xenbr4 entered promiscuous mode
Jan 11 22:49:29 xenserver-2 kernel: [   22.202468] be2net 0000:09:00.0 eth4: Link is Down
Jan 11 22:49:29 xenserver-2 kernel: [   22.202903] 8021q: adding VLAN 0 to HW filter on device eth4
Jan 11 22:49:29 xenserver-2 kernel: [   22.240341] device eth4 entered promiscuous mode
Jan 11 22:49:29 xenserver-2 kernel: [   22.244536] be2net 0000:09:00.0 eth4: Link is Down
Jan 11 22:49:29 xenserver-2 kernel: [   22.401744] device xapi0 entered promiscuous mode
Jan 11 22:49:29 xenserver-2 kernel: [   22.480579] device eth5 entered promiscuous mode
Jan 11 22:49:29 xenserver-2 kernel: [   22.482485] be2net 0000:09:00.1 eth5: Link is Down
Jan 11 22:49:29 xenserver-2 kernel: [   22.485195] device eth0 entered promiscuous mode
Jan 11 22:49:29 xenserver-2 kernel: [   22.534498] be2net 0000:09:00.1 eth5: Link is Down
Jan 11 22:49:29 xenserver-2 kernel: [   22.534866] 8021q: adding VLAN 0 to HW filter on device eth5
Jan 11 22:49:57 xenserver-2 kernel: [   **49.648665**] be2net 0000:09:00.0 eth4: Link is Up
The test result is PASS
The test extra info:
MAC Loopback test        0
PHY Loopback test        0
External Loopback test   0
DDR DMA test     0
Link test        0

Jan 11 22:50:02 xenserver-2 kernel: [   **55.509742**] be2net 0000:09:00.0 eth4: Link is Up
Jan 11 22:50:07 xenserver-2 kernel: [   **59.648547**] be2net 0000:09:00.1 eth5: Link is Up
The test result is PASS
The test extra info:
MAC Loopback test        0
PHY Loopback test        0
External Loopback test   0
DDR DMA test     0
Link test        0

Jan 11 22:50:12 xenserver-2 kernel: [   **65.559896**] be2net 0000:09:00.1 eth5: Link is Up